diff options
Diffstat (limited to 'arch/arm/mach-mxs')
36 files changed, 1434 insertions, 480 deletions
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 8bfc8df5461..4f6f174af6c 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -2,13 +2,18 @@ if ARCH_MXS source "arch/arm/mach-mxs/devices/Kconfig" +config MXS_OCOTP + bool + config SOC_IMX23 bool select CPU_ARM926T + select HAVE_PWM config SOC_IMX28 bool select CPU_ARM926T + select HAVE_PWM comment "MXS platforms:" @@ -16,6 +21,8 @@ config MACH_MX23EVK bool "Support MX23EVK Platform" select SOC_IMX23 select MXS_HAVE_AMBA_DUART + select MXS_HAVE_PLATFORM_AUART + select MXS_HAVE_PLATFORM_MXSFB default y help Include support for MX23EVK platform. This includes specific @@ -25,10 +32,27 @@ config MACH_MX28EVK bool "Support MX28EVK Platform" select SOC_IMX28 select MXS_HAVE_AMBA_DUART + select MXS_HAVE_PLATFORM_AUART select MXS_HAVE_PLATFORM_FEC + select MXS_HAVE_PLATFORM_FLEXCAN + select MXS_HAVE_PLATFORM_MXSFB + select MXS_OCOTP default y help Include support for MX28EVK platform. This includes specific configurations for the board and its peripherals. +config MODULE_TX28 + bool + select SOC_IMX28 + select MXS_HAVE_AMBA_DUART + select MXS_HAVE_PLATFORM_AUART + select MXS_HAVE_PLATFORM_FEC + select MXS_HAVE_PLATFORM_MXS_I2C + select MXS_HAVE_PLATFORM_MXS_PWM + +config MACH_TX28 + bool "Ka-Ro TX28 module" + select MODULE_TX28 + endif diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 39d3f9c2a84..2f1f6141ca7 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,10 +1,15 @@ # Common support obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o +obj-$(CONFIG_MXS_OCOTP) += ocotp.o +obj-$(CONFIG_PM) += pm.o + obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o +obj-$(CONFIG_MODULE_TX28) += module-tx28.o +obj-$(CONFIG_MACH_TX28) += mach-tx28.o obj-y += devices/ diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index ca72a05ed9c..d133c7f3094 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -442,11 +442,18 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("duart", "apb_pclk", xbus_clk) /* for amba-pl011 driver */ _REGISTER_CLOCK("duart", NULL, uart_clk) + _REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) - _REGISTER_CLOCK(NULL, "hclk", hbus_clk) + _REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk) + _REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk) _REGISTER_CLOCK(NULL, "usb", usb_clk) _REGISTER_CLOCK(NULL, "audio", audio_clk) - _REGISTER_CLOCK(NULL, "pwm", pwm_clk) + _REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk) + _REGISTER_CLOCK("imx23-fb", NULL, lcdif_clk) }; static int clk_misc_init(void) diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index fd1c4c54b8e..5e489a2b202 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -609,17 +609,30 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("duart", NULL, uart_clk) _REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk) _REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk) + _REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk) + _REGISTER_CLOCK("mxs-auart.1", NULL, uart_clk) + _REGISTER_CLOCK("mxs-auart.2", NULL, uart_clk) + _REGISTER_CLOCK("mxs-auart.3", NULL, uart_clk) + _REGISTER_CLOCK("mxs-auart.4", NULL, uart_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) _REGISTER_CLOCK("pll2", NULL, pll2_clk) - _REGISTER_CLOCK(NULL, "hclk", hbus_clk) - _REGISTER_CLOCK(NULL, "xclk", xbus_clk) - _REGISTER_CLOCK(NULL, "can0", can0_clk) - _REGISTER_CLOCK(NULL, "can1", can1_clk) + _REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk) + _REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk) + _REGISTER_CLOCK("flexcan.0", NULL, can0_clk) + _REGISTER_CLOCK("flexcan.1", NULL, can1_clk) _REGISTER_CLOCK(NULL, "usb0", usb0_clk) _REGISTER_CLOCK(NULL, "usb1", usb1_clk) - _REGISTER_CLOCK(NULL, "pwm", pwm_clk) + _REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.5", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.6", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.7", NULL, pwm_clk) _REGISTER_CLOCK(NULL, "lradc", lradc_clk) _REGISTER_CLOCK(NULL, "spdif", spdif_clk) + _REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk) }; static int clk_misc_init(void) @@ -737,6 +750,8 @@ int __init mx28_clocks_init(void) clk_enable(&emi_clk); clk_enable(&uart_clk); + clk_set_parent(&lcdif_clk, &ref_pix_clk); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); mxs_timer_init(&clk32k_clk, MX28_INT_TIMER0); diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h index 1256788561d..c7e14f4e366 100644 --- a/arch/arm/mach-mxs/devices-mx23.h +++ b/arch/arm/mach-mxs/devices-mx23.h @@ -10,7 +10,18 @@ */ #include <mach/mx23.h> #include <mach/devices-common.h> +#include <mach/mxsfb.h> extern const struct amba_device mx23_duart_device __initconst; #define mx23_add_duart() \ mxs_add_duart(&mx23_duart_device) + +extern const struct mxs_auart_data mx23_auart_data[] __initconst; +#define mx23_add_auart(id) mxs_add_auart(&mx23_auart_data[id]) +#define mx23_add_auart0() mx23_add_auart(0) +#define mx23_add_auart1() mx23_add_auart(1) + +#define mx23_add_mxs_pwm(id) mxs_add_mxs_pwm(MX23_PWM_BASE_ADDR, id) + +struct platform_device *__init mx23_add_mxsfb( + const struct mxsfb_platform_data *pdata); diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index 33773a6333a..9d08555c4cf 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -10,11 +10,34 @@ */ #include <mach/mx28.h> #include <mach/devices-common.h> +#include <mach/mxsfb.h> extern const struct amba_device mx28_duart_device __initconst; #define mx28_add_duart() \ mxs_add_duart(&mx28_duart_device) +extern const struct mxs_auart_data mx28_auart_data[] __initconst; +#define mx28_add_auart(id) mxs_add_auart(&mx28_auart_data[id]) +#define mx28_add_auart0() mx28_add_auart(0) +#define mx28_add_auart1() mx28_add_auart(1) +#define mx28_add_auart2() mx28_add_auart(2) +#define mx28_add_auart3() mx28_add_auart(3) +#define mx28_add_auart4() mx28_add_auart(4) + extern const struct mxs_fec_data mx28_fec_data[] __initconst; #define mx28_add_fec(id, pdata) \ mxs_add_fec(&mx28_fec_data[id], pdata) + +extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst; +#define mx28_add_flexcan(id, pdata) \ + mxs_add_flexcan(&mx28_flexcan_data[id], pdata) +#define mx28_add_flexcan0(pdata) mx28_add_flexcan(0, pdata) +#define mx28_add_flexcan1(pdata) mx28_add_flexcan(1, pdata) + +extern const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst; +#define mx28_add_mxs_i2c(id) mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id]) + +#define mx28_add_mxs_pwm(id) mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id) + +struct platform_device *__init mx28_add_mxsfb( + const struct mxsfb_platform_data *pdata); diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c index c20d54740b0..cfdb6b28470 100644 --- a/arch/arm/mach-mxs/devices.c +++ b/arch/arm/mach-mxs/devices.c @@ -66,6 +66,8 @@ struct platform_device *__init mxs_add_platform_device_dmamask( ret = platform_device_add(pdev); if (ret) { err: + if (dmamask) + kfree(pdev->dev.dma_mask); platform_device_put(pdev); return ERR_PTR(ret); } diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig index cf7dc1ae575..1451ad060d8 100644 --- a/arch/arm/mach-mxs/devices/Kconfig +++ b/arch/arm/mach-mxs/devices/Kconfig @@ -2,5 +2,21 @@ config MXS_HAVE_AMBA_DUART bool select ARM_AMBA +config MXS_HAVE_PLATFORM_AUART + bool + config MXS_HAVE_PLATFORM_FEC bool + +config MXS_HAVE_PLATFORM_FLEXCAN + select HAVE_CAN_FLEXCAN if CAN + bool + +config MXS_HAVE_PLATFORM_MXS_I2C + bool + +config MXS_HAVE_PLATFORM_MXS_PWM + bool + +config MXS_HAVE_PLATFORM_MXSFB + bool diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index d0a09f6934b..0d9bea30b0a 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -1,2 +1,8 @@ obj-$(CONFIG_MXS_HAVE_AMBA_DUART) += amba-duart.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o +obj-y += platform-dma.o obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o diff --git a/arch/arm/mach-mxs/devices/platform-auart.c b/arch/arm/mach-mxs/devices/platform-auart.c new file mode 100644 index 00000000000..796606cce0c --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-auart.c @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2010 Pengutronix + * Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +#define mxs_auart_data_entry_single(soc, _id, hwid) \ + { \ + .id = _id, \ + .iobase = soc ## _AUART ## hwid ## _BASE_ADDR, \ + .irq = soc ## _INT_AUART ## hwid, \ + } + +#define mxs_auart_data_entry(soc, _id, hwid) \ + [_id] = mxs_auart_data_entry_single(soc, _id, hwid) + +#ifdef CONFIG_SOC_IMX23 +const struct mxs_auart_data mx23_auart_data[] __initconst = { +#define mx23_auart_data_entry(_id, hwid) \ + mxs_auart_data_entry(MX23, _id, hwid) + mx23_auart_data_entry(0, 1), + mx23_auart_data_entry(1, 2), +}; +#endif + +#ifdef CONFIG_SOC_IMX28 +const struct mxs_auart_data mx28_auart_data[] __initconst = { +#define mx28_auart_data_entry(_id) \ + mxs_auart_data_entry(MX28, _id, _id) + mx28_auart_data_entry(0), + mx28_auart_data_entry(1), + mx28_auart_data_entry(2), + mx28_auart_data_entry(3), + mx28_auart_data_entry(4), +}; +#endif + +struct platform_device *__init mxs_add_auart( + const struct mxs_auart_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return mxs_add_platform_device_dmamask("mxs-auart", data->id, + res, ARRAY_SIZE(res), NULL, 0, + DMA_BIT_MASK(32)); +} + diff --git a/arch/arm/mach-mxs/devices/platform-dma.c b/arch/arm/mach-mxs/devices/platform-dma.c new file mode 100644 index 00000000000..295c4424d5d --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-dma.c @@ -0,0 +1,49 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/compiler.h> +#include <linux/err.h> +#include <linux/init.h> + +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +static struct platform_device *__init mxs_add_dma(const char *devid, + resource_size_t base) +{ + struct resource res[] = { + { + .start = base, + .end = base + SZ_8K - 1, + .flags = IORESOURCE_MEM, + } + }; + + return mxs_add_platform_device_dmamask(devid, -1, + res, ARRAY_SIZE(res), NULL, 0, + DMA_BIT_MASK(32)); +} + +static int __init mxs_add_mxs_dma(void) +{ + char *apbh = "mxs-dma-apbh"; + char *apbx = "mxs-dma-apbx"; + + if (cpu_is_mx23()) { + mxs_add_dma(apbh, MX23_APBH_DMA_BASE_ADDR); + mxs_add_dma(apbx, MX23_APBX_DMA_BASE_ADDR); + } + + if (cpu_is_mx28()) { + mxs_add_dma(apbh, MX28_APBH_DMA_BASE_ADDR); + mxs_add_dma(apbx, MX28_APBX_DMA_BASE_ADDR); + } + + return 0; +} +arch_initcall(mxs_add_mxs_dma); diff --git a/arch/arm/mach-mxs/devices/platform-fec.c b/arch/arm/mach-mxs/devices/platform-fec.c index c42dff72b46..9859cf28333 100644 --- a/arch/arm/mach-mxs/devices/platform-fec.c +++ b/arch/arm/mach-mxs/devices/platform-fec.c @@ -45,6 +45,7 @@ struct platform_device *__init mxs_add_fec( }, }; - return mxs_add_platform_device("imx28-fec", data->id, - res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); + return mxs_add_platform_device_dmamask("imx28-fec", data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata), + DMA_BIT_MASK(32)); } diff --git a/arch/arm/mach-mxs/devices/platform-flexcan.c b/arch/arm/mach-mxs/devices/platform-flexcan.c new file mode 100644 index 00000000000..43a6b4bae6f --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-flexcan.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2010, 2011 Pengutronix, + * Marc Kleine-Budde <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +#define mxs_flexcan_data_entry_single(soc, _id, _hwid, _size) \ + { \ + .id = _id, \ + .iobase = soc ## _CAN ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_CAN ## _hwid, \ + } + +#define mxs_flexcan_data_entry(soc, _id, _hwid, _size) \ + [_id] = mxs_flexcan_data_entry_single(soc, _id, _hwid, _size) + +#ifdef CONFIG_SOC_IMX28 +const struct mxs_flexcan_data mx28_flexcan_data[] __initconst = { +#define mx28_flexcan_data_entry(_id, _hwid) \ + mxs_flexcan_data_entry_single(MX28, _id, _hwid, SZ_8K) + mx28_flexcan_data_entry(0, 0), + mx28_flexcan_data_entry(1, 1), +}; +#endif /* ifdef CONFIG_SOC_IMX28 */ + +struct platform_device *__init mxs_add_flexcan( + const struct mxs_flexcan_data *data, + const struct flexcan_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return mxs_add_platform_device("flexcan", data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} diff --git a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c new file mode 100644 index 00000000000..eab3a06836d --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2011 Pengutronix + * Wolfram Sang <w.sang@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +#define mxs_i2c_data_entry_single(soc, _id) \ + { \ + .id = _id, \ + .iobase = soc ## _I2C ## _id ## _BASE_ADDR, \ + .errirq = soc ## _INT_I2C ## _id ## _ERROR, \ + .dmairq = soc ## _INT_I2C ## _id ## _DMA, \ + } + +#define mxs_i2c_data_entry(soc, _id) \ + [_id] = mxs_i2c_data_entry_single(soc, _id) + +#ifdef CONFIG_SOC_IMX28 +const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst = { + mxs_i2c_data_entry(MX28, 0), + mxs_i2c_data_entry(MX28, 1), +}; +#endif + +struct platform_device *__init mxs_add_mxs_i2c(const struct mxs_i2c_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->errirq, + .end = data->errirq, + .flags = IORESOURCE_IRQ, + }, { + .start = data->dmairq, + .end = data->dmairq, + .flags = IORESOURCE_IRQ, + }, + }; + + return mxs_add_platform_device("mxs-i2c", data->id, res, + ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/mach-mxs/devices/platform-mxs-pwm.c b/arch/arm/mach-mxs/devices/platform-mxs-pwm.c new file mode 100644 index 00000000000..680f5a90293 --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-mxs-pwm.c @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2010 Pengutronix + * Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/devices-common.h> + +struct platform_device *__init mxs_add_mxs_pwm(resource_size_t iobase, int id) +{ + struct resource res = { + .flags = IORESOURCE_MEM, + }; + + res.start = iobase + 0x10 + 0x20 * id; + res.end = res.start + 0x1f; + + return mxs_add_platform_device("mxs-pwm", id, &res, 1, NULL, 0); +} diff --git a/arch/arm/mach-mxs/devices/platform-mxsfb.c b/arch/arm/mach-mxs/devices/platform-mxsfb.c new file mode 100644 index 00000000000..bf72c9b8dbd --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-mxsfb.c @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2011 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> +#include <mach/mxsfb.h> + +#ifdef CONFIG_SOC_IMX23 +struct platform_device *__init mx23_add_mxsfb( + const struct mxsfb_platform_data *pdata) +{ + struct resource res[] = { + { + .start = MX23_LCDIF_BASE_ADDR, + .end = MX23_LCDIF_BASE_ADDR + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, + }; + + return mxs_add_platform_device_dmamask("imx23-fb", -1, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} +#endif /* ifdef CONFIG_SOC_IMX23 */ + +#ifdef CONFIG_SOC_IMX28 +struct platform_device *__init mx28_add_mxsfb( + const struct mxsfb_platform_data *pdata) +{ + struct resource res[] = { + { + .start = MX28_LCDIF_BASE_ADDR, + .end = MX28_LCDIF_BASE_ADDR + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, + }; + + return mxs_add_platform_device_dmamask("imx28-fb", -1, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} +#endif /* ifdef CONFIG_SOC_IMX28 */ diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c index 61991e4dde4..56fa2ed1522 100644 --- a/arch/arm/mach-mxs/gpio.c +++ b/arch/arm/mach-mxs/gpio.c @@ -182,6 +182,7 @@ static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable) } static struct irq_chip gpio_irq_chip = { + .name = "mxs gpio", .irq_ack = mxs_gpio_ack_irq, .irq_mask = mxs_gpio_mask_irq, .irq_unmask = mxs_gpio_unmask_irq, @@ -289,39 +290,42 @@ int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt) return 0; } -#define DEFINE_MXS_GPIO_PORT(soc, _id) \ +#define MX23_GPIO_BASE MX23_IO_ADDRESS(MX23_PINCTRL_BASE_ADDR) +#define MX28_GPIO_BASE MX28_IO_ADDRESS(MX28_PINCTRL_BASE_ADDR) + +#define DEFINE_MXS_GPIO_PORT(_base, _irq, _id) \ { \ .chip.label = "gpio-" #_id, \ .id = _id, \ - .irq = soc ## _INT_GPIO ## _id, \ - .base = soc ## _IO_ADDRESS( \ - soc ## _PINCTRL ## _BASE_ADDR), \ + .irq = _irq, \ + .base = _base, \ .virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32, \ } -#define DEFINE_REGISTER_FUNCTION(prefix) \ -int __init prefix ## _register_gpios(void) \ -{ \ - return mxs_gpio_init(prefix ## _gpio_ports, \ - ARRAY_SIZE(prefix ## _gpio_ports)); \ -} - #ifdef CONFIG_SOC_IMX23 static struct mxs_gpio_port mx23_gpio_ports[] = { - DEFINE_MXS_GPIO_PORT(MX23, 0), - DEFINE_MXS_GPIO_PORT(MX23, 1), - DEFINE_MXS_GPIO_PORT(MX23, 2), + DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO0, 0), + DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO1, 1), + DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO2, 2), }; -DEFINE_REGISTER_FUNCTION(mx23) + +int __init mx23_register_gpios(void) +{ + return mxs_gpio_init(mx23_gpio_ports, ARRAY_SIZE(mx23_gpio_ports)); +} #endif #ifdef CONFIG_SOC_IMX28 static struct mxs_gpio_port mx28_gpio_ports[] = { - DEFINE_MXS_GPIO_PORT(MX28, 0), - DEFINE_MXS_GPIO_PORT(MX28, 1), - DEFINE_MXS_GPIO_PORT(MX28, 2), - DEFINE_MXS_GPIO_PORT(MX28, 3), - DEFINE_MXS_GPIO_PORT(MX28, 4), + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO0, 0), + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO1, 1), + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO2, 2), + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO3, 3), + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO4, 4), }; -DEFINE_REGISTER_FUNCTION(mx28) + +int __init mx28_register_gpios(void) +{ + return mxs_gpio_init(mx28_gpio_ports, ARRAY_SIZE(mx28_gpio_ports)); +} #endif diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h index 59133eb3cc9..635bb5d9a20 100644 --- a/arch/arm/mach-mxs/include/mach/common.h +++ b/arch/arm/mach-mxs/include/mach/common.h @@ -13,6 +13,7 @@ struct clk; +extern const u32 *mxs_get_ocotp(void); extern int mxs_reset_block(void __iomem *); extern void mxs_timer_init(struct clk *, int); diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index 6c3d1a10343..71f24484b04 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -30,6 +30,16 @@ int __init mxs_add_amba_device(const struct amba_device *dev); /* duart */ int __init mxs_add_duart(const struct amba_device *dev); +/* auart */ +struct mxs_auart_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init mxs_add_auart( + const struct mxs_auart_data *data); + /* fec */ #include <linux/fec.h> struct mxs_fec_data { @@ -41,3 +51,28 @@ struct mxs_fec_data { struct platform_device *__init mxs_add_fec( const struct mxs_fec_data *data, const struct fec_platform_data *pdata); + +/* flexcan */ +#include <linux/can/platform/flexcan.h> +struct mxs_flexcan_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init mxs_add_flexcan( + const struct mxs_flexcan_data *data, + const struct flexcan_platform_data *pdata); + +/* i2c */ +struct mxs_i2c_data { + int id; + resource_size_t iobase; + resource_size_t errirq; + resource_size_t dmairq; +}; +struct platform_device * __init mxs_add_mxs_i2c(const struct mxs_i2c_data *data); + +/* pwm */ +struct platform_device *__init mxs_add_mxs_pwm( + resource_size_t iobase, int id); diff --git a/arch/arm/mach-mxs/include/mach/iomux-mx23.h b/arch/arm/mach-mxs/include/mach/iomux-mx23.h index 94e5dd83cdb..b0190a4822f 100644 --- a/arch/arm/mach-mxs/include/mach/iomux-mx23.h +++ b/arch/arm/mach-mxs/include/mach/iomux-mx23.h @@ -254,102 +254,102 @@ #define MX23_PAD_ROTARYB__GPMI_CE3N MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_2) /* MUXSEL_GPIO */ -#define MX23_PAD_GPMI_D00__GPO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D01__GPO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D02__GPO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D03__GPO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D04__GPO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D05__GPO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D06__GPO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D07__GPO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D08__GPO_0_8 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D09__GPO_0_9 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D10__GPO_0_10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D11__GPO_0_11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D12__GPO_0_12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D13__GPO_0_13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D14__GPO_0_14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D15__GPO_0_15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_CLE__GPO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_ALE__GPO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_CE2N__GPO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDY0__GPO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDY1__GPO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDY2__GPO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDY3__GPO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_WPN__GPO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_WRN__GPO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDN__GPO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO) -#define MX23_PAD_AUART1_CTS__GPO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO) -#define MX23_PAD_AUART1_RTS__GPO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO) -#define MX23_PAD_AUART1_RX__GPO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO) -#define MX23_PAD_AUART1_TX__GPO_0_29 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO) -#define MX23_PAD_I2C_SCL__GPO_0_30 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO) -#define MX23_PAD_I2C_SDA__GPO_0_31 MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D00__GPIO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D01__GPIO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D02__GPIO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D03__GPIO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D04__GPIO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D05__GPIO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D06__GPIO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D07__GPIO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D08__GPIO_0_8 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D09__GPIO_0_9 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D10__GPIO_0_10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D11__GPIO_0_11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D12__GPIO_0_12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D13__GPIO_0_13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D14__GPIO_0_14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D15__GPIO_0_15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_CLE__GPIO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_ALE__GPIO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_CE2N__GPIO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDY0__GPIO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDY1__GPIO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDY2__GPIO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDY3__GPIO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_WPN__GPIO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_WRN__GPIO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDN__GPIO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO) +#define MX23_PAD_AUART1_CTS__GPIO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO) +#define MX23_PAD_AUART1_RTS__GPIO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO) +#define MX23_PAD_AUART1_RX__GPIO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO) +#define MX23_PAD_AUART1_TX__GPIO_0_29 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO) +#define MX23_PAD_I2C_SCL__GPIO_0_30 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO) +#define MX23_PAD_I2C_SDA__GPIO_0_31 MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D00__GPO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D01__GPO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D02__GPO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D03__GPO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D04__GPO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D05__GPO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D06__GPO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D07__GPO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D08__GPO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D09__GPO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D10__GPO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D11__GPO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D12__GPO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D13__GPO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D14__GPO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D15__GPO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D16__GPO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D17__GPO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_RESET__GPO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_RS__GPO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_WR__GPO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_CS__GPO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_DOTCK__GPO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_ENABLE__GPO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_HSYNC__GPO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_VSYNC__GPO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM0__GPO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM1__GPO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM2__GPO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM3__GPO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM4__GPO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D00__GPIO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D01__GPIO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D02__GPIO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D03__GPIO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D04__GPIO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D05__GPIO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D06__GPIO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D07__GPIO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D08__GPIO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D09__GPIO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D10__GPIO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D11__GPIO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D12__GPIO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D13__GPIO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D14__GPIO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D15__GPIO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D16__GPIO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D17__GPIO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_RESET__GPIO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_RS__GPIO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_WR__GPIO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_CS__GPIO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_DOTCK__GPIO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_ENABLE__GPIO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_HSYNC__GPIO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_VSYNC__GPIO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM0__GPIO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM1__GPIO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM2__GPIO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM3__GPIO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM4__GPIO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_CMD__GPO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DETECT__GPO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DATA0__GPO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DATA1__GPO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DATA2__GPO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DATA3__GPO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_SCK__GPO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO) -#define MX23_PAD_ROTARYA__GPO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO) -#define MX23_PAD_ROTARYB__GPO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A00__GPO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A01__GPO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A02__GPO_2_11 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A03__GPO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A04__GPO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A05__GPO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A06__GPO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A07__GPO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A08__GPO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A09__GPO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A10__GPO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A11__GPO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A12__GPO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_BA0__GPO_2_22 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_BA1__GPO_2_23 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_CASN__GPO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_CE0N__GPO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_CE1N__GPO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_CE1N__GPO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_CE0N__GPO_2_28 MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_CKE__GPO_2_29 MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_RASN__GPO_2_30 MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_WEN__GPO_2_31 MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_CMD__GPIO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DETECT__GPIO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DATA0__GPIO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DATA1__GPIO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DATA2__GPIO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DATA3__GPIO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_SCK__GPIO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO) +#define MX23_PAD_ROTARYA__GPIO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO) +#define MX23_PAD_ROTARYB__GPIO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A00__GPIO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A01__GPIO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A02__GPIO_2_11 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A03__GPIO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A04__GPIO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A05__GPIO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A06__GPIO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A07__GPIO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A08__GPIO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A09__GPIO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A10__GPIO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A11__GPIO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A12__GPIO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_BA0__GPIO_2_22 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_BA1__GPIO_2_23 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_CASN__GPIO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_CE0N__GPIO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_CE1N__GPIO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_CE1N__GPIO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_CE0N__GPIO_2_28 MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_CKE__GPIO_2_29 MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_RASN__GPIO_2_30 MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_WEN__GPIO_2_31 MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO) #endif /* __MACH_IOMUX_MX23_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/iomux.h b/arch/arm/mach-mxs/include/mach/iomux.h index fe558e3c5a9..7abdf58b8bb 100644 --- a/arch/arm/mach-mxs/include/mach/iomux.h +++ b/arch/arm/mach-mxs/include/mach/iomux.h @@ -91,6 +91,9 @@ typedef u32 iomux_cfg_t; #define MXS_PAD_PULLUP ((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \ MXS_PAD_PULL_VALID_MASK) +/* generic pad control used in most cases */ +#define MXS_PAD_CTRL (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL) + #define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull) \ (((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) | \ ((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) | \ diff --git a/arch/arm/mach-mxs/include/mach/mx23.h b/arch/arm/mach-mxs/include/mach/mx23.h index 9edd02ec8e3..c0a18c23084 100644 --- a/arch/arm/mach-mxs/include/mach/mx23.h +++ b/arch/arm/mach-mxs/include/mach/mx23.h @@ -93,7 +93,7 @@ #define MX23_INT_USB_WAKEUP 12 #define MX23_INT_GPMI_DMA 13 #define MX23_INT_SSP1_DMA 14 -#define MX23_INT_SSP_ERROR 15 +#define MX23_INT_SSP1_ERROR 15 #define MX23_INT_GPIO0 16 #define MX23_INT_GPIO1 17 #define MX23_INT_GPIO2 18 @@ -101,9 +101,9 @@ #define MX23_INT_SSP2_DMA 20 #define MX23_INT_ECC8_IRQ 21 #define MX23_INT_RTC_ALARM 22 -#define MX23_INT_UARTAPP_TX_DMA 23 -#define MX23_INT_UARTAPP_INTERNAL 24 -#define MX23_INT_UARTAPP_RX_DMA 25 +#define MX23_INT_AUART1_TX_DMA 23 +#define MX23_INT_AUART1 24 +#define MX23_INT_AUART1_RX_DMA 25 #define MX23_INT_I2C_DMA 26 #define MX23_INT_I2C_ERROR 27 #define MX23_INT_TIMER0 28 @@ -135,11 +135,35 @@ #define MX23_INT_DCP 54 #define MX23_INT_BCH 56 #define MX23_INT_PXP 57 -#define MX23_INT_UARTAPP2_TX_DMA 58 -#define MX23_INT_UARTAPP2_INTERNAL 59 -#define MX23_INT_UARTAPP2_RX_DMA 60 +#define MX23_INT_AUART2_TX_DMA 58 +#define MX23_INT_AUART2 59 +#define MX23_INT_AUART2_RX_DMA 60 #define MX23_INT_VDAC_DETECT 61 #define MX23_INT_VDD5V_DROOP 64 #define MX23_INT_DCDC4P2_BO 65 +/* + * APBH DMA + */ +#define MX23_DMA_SSP1 1 +#define MX23_DMA_SSP2 2 +#define MX23_DMA_GPMI0 4 +#define MX23_DMA_GPMI1 5 +#define MX23_DMA_GPMI2 6 +#define MX23_DMA_GPMI3 7 + +/* + * APBX DMA + */ +#define MX23_DMA_ADC 0 +#define MX23_DMA_DAC 1 +#define MX23_DMA_SPDIF 2 +#define MX23_DMA_I2C 3 +#define MX23_DMA_SAIF0 4 +#define MX23_DMA_UART0_RX 6 +#define MX23_DMA_UART0_TX 7 +#define MX23_DMA_UART1_RX 8 +#define MX23_DMA_UART1_TX 9 +#define MX23_DMA_SAIF1 10 + #endif /* __MACH_MX23_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h index 0716745267a..75d86118b76 100644 --- a/arch/arm/mach-mxs/include/mach/mx28.h +++ b/arch/arm/mach-mxs/include/mach/mx28.h @@ -163,10 +163,10 @@ #define MX28_INT_USB0 93 #define MX28_INT_USB1_WAKEUP 94 #define MX28_INT_USB0_WAKEUP 95 -#define MX28_INT_SSP0 96 -#define MX28_INT_SSP1 97 -#define MX28_INT_SSP2 98 -#define MX28_INT_SSP3 99 +#define MX28_INT_SSP0_ERROR 96 +#define MX28_INT_SSP1_ERROR 97 +#define MX28_INT_SSP2_ERROR 98 +#define MX28_INT_SSP3_ERROR 99 #define MX28_INT_ENET_SWI 100 #define MX28_INT_ENET_MAC0 101 #define MX28_INT_ENET_MAC1 102 @@ -185,4 +185,41 @@ #define MX28_INT_GPIO1 126 #define MX28_INT_GPIO0 127 +/* + * APBH DMA + */ +#define MX28_DMA_SSP0 0 +#define MX28_DMA_SSP1 1 +#define MX28_DMA_SSP2 2 +#define MX28_DMA_SSP3 3 +#define MX28_DMA_GPMI0 4 +#define MX28_DMA_GPMI1 5 +#define MX28_DMA_GPMI2 6 +#define MX28_DMA_GPMI3 7 +#define MX28_DMA_GPMI4 8 +#define MX28_DMA_GPMI5 9 +#define MX28_DMA_GPMI6 10 +#define MX28_DMA_GPMI7 11 +#define MX28_DMA_HSADC 12 +#define MX28_DMA_LCDIF 13 + +/* + * APBX DMA + */ +#define MX28_DMA_AUART4_RX 0 +#define MX28_DMA_AUART4_TX 1 +#define MX28_DMA_SPDIF_TX 2 +#define MX28_DMA_SAIF0 4 +#define MX28_DMA_SAIF1 5 +#define MX28_DMA_I2C0 6 +#define MX28_DMA_I2C1 7 +#define MX28_DMA_AUART0_RX 8 +#define MX28_DMA_AUART0_TX 9 +#define MX28_DMA_AUART1_RX 10 +#define MX28_DMA_AUART1_TX 11 +#define MX28_DMA_AUART2_RX 12 +#define MX28_DMA_AUART2_TX 13 +#define MX28_DMA_AUART3_RX 14 +#define MX28_DMA_AUART3_TX 15 + #endif /* __MACH_MX28_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h index f186c08c291..35a89dd2724 100644 --- a/arch/arm/mach-mxs/include/mach/mxs.h +++ b/arch/arm/mach-mxs/include/mach/mxs.h @@ -28,8 +28,13 @@ /* * MXS CPU types */ -#define cpu_is_mx23() (machine_is_mx23evk()) -#define cpu_is_mx28() (machine_is_mx28evk()) +#define cpu_is_mx23() ( \ + machine_is_mx23evk() || \ + 0) +#define cpu_is_mx28() ( \ + machine_is_mx28evk() || \ + machine_is_tx28() || \ + 0) /* * IO addresses common to MXS-based diff --git a/arch/arm/mach-mxs/include/mach/mxsfb.h b/arch/arm/mach-mxs/include/mach/mxsfb.h new file mode 100644 index 00000000000..e4d79791515 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/mxsfb.h @@ -0,0 +1,49 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_FB_H +#define __MACH_FB_H + +#include <linux/fb.h> + +#define STMLCDIF_8BIT 1 /** pixel data bus to the display is of 8 bit width */ +#define STMLCDIF_16BIT 0 /** pixel data bus to the display is of 16 bit width */ +#define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */ +#define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */ + +#define FB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6) +#define FB_SYNC_DOTCLK_FAILING_ACT (1 << 7) /* failing/negtive edge sampling */ + +struct mxsfb_platform_data { + struct fb_videomode *mode_list; + unsigned mode_count; + + unsigned default_bpp; + + unsigned dotclk_delay; /* refer manual HW_LCDIF_VDCTRL4 register */ + unsigned ld_intf_width; /* refer STMLCDIF_* macros */ + + unsigned fb_size; /* Size of the video memory. If zero a + * default will be used + */ + unsigned long fb_phys; /* physical address for the video memory. If + * zero the framebuffer memory will be dynamically + * allocated. If specified,fb_size must also be specified. + * fb_phys must be unused by Linux. + */ +}; + +#endif /* __MACH_FB_H */ diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h index a005e76f34f..f12a1732d8b 100644 --- a/arch/arm/mach-mxs/include/mach/uncompress.h +++ b/arch/arm/mach-mxs/include/mach/uncompress.h @@ -63,6 +63,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) mxs_duart_base = MX23_DUART_BASE_ADDR; break; case MACH_TYPE_MX28EVK: + case MACH_TYPE_TX28: mxs_duart_base = MX28_DUART_BASE_ADDR; break; default: diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c index aa0640052f5..a66994f0518 100644 --- a/arch/arm/mach-mxs/mach-mx23evk.c +++ b/arch/arm/mach-mxs/mach-mx23evk.c @@ -26,17 +26,103 @@ #include "devices-mx23.h" +#define MX23EVK_LCD_ENABLE MXS_GPIO_NR(1, 18) +#define MX23EVK_BL_ENABLE MXS_GPIO_NR(1, 28) + static const iomux_cfg_t mx23evk_pads[] __initconst = { /* duart */ - MX23_PAD_PWM0__DUART_RX | MXS_PAD_4MA, - MX23_PAD_PWM1__DUART_TX | MXS_PAD_4MA, + MX23_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, + MX23_PAD_PWM1__DUART_TX | MXS_PAD_CTRL, + + /* auart */ + MX23_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL, + MX23_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL, + MX23_PAD_AUART1_CTS__AUART1_CTS | MXS_PAD_CTRL, + MX23_PAD_AUART1_RTS__AUART1_RTS | MXS_PAD_CTRL, + + /* mxsfb (lcdif) */ + MX23_PAD_LCD_D00__LCD_D00 | MXS_PAD_CTRL, + MX23_PAD_LCD_D01__LCD_D01 | MXS_PAD_CTRL, + MX23_PAD_LCD_D02__LCD_D02 | MXS_PAD_CTRL, + MX23_PAD_LCD_D03__LCD_D03 | MXS_PAD_CTRL, + MX23_PAD_LCD_D04__LCD_D04 | MXS_PAD_CTRL, + MX23_PAD_LCD_D05__LCD_D05 | MXS_PAD_CTRL, + MX23_PAD_LCD_D06__LCD_D06 | MXS_PAD_CTRL, + MX23_PAD_LCD_D07__LCD_D07 | MXS_PAD_CTRL, + MX23_PAD_LCD_D08__LCD_D08 | MXS_PAD_CTRL, + MX23_PAD_LCD_D09__LCD_D09 | MXS_PAD_CTRL, + MX23_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL, + MX23_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL, + MX23_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL, + MX23_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL, + MX23_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL, + MX23_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL, + MX23_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL, + MX23_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL, + MX23_PAD_GPMI_D08__LCD_D18 | MXS_PAD_CTRL, + MX23_PAD_GPMI_D09__LCD_D19 | MXS_PAD_CTRL, + MX23_PAD_GPMI_D10__LCD_D20 | MXS_PAD_CTRL, + MX23_PAD_GPMI_D11__LCD_D21 | MXS_PAD_CTRL, + MX23_PAD_GPMI_D12__LCD_D22 | MXS_PAD_CTRL, + MX23_PAD_GPMI_D13__LCD_D23 | MXS_PAD_CTRL, + MX23_PAD_LCD_VSYNC__LCD_VSYNC | MXS_PAD_CTRL, + MX23_PAD_LCD_HSYNC__LCD_HSYNC | MXS_PAD_CTRL, + MX23_PAD_LCD_DOTCK__LCD_DOTCK | MXS_PAD_CTRL, + MX23_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL, + /* LCD panel enable */ + MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL, + /* backlight control */ + MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL, +}; + +/* mxsfb (lcdif) */ +static struct fb_videomode mx23evk_video_modes[] = { + { + .name = "Samsung-LMS430HF02", + .refresh = 60, + .xres = 480, + .yres = 272, + .pixclock = 108096, /* picosecond (9.2 MHz) */ + .left_margin = 15, + .right_margin = 8, + .upper_margin = 12, + .lower_margin = 4, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | + FB_SYNC_DOTCLK_FAILING_ACT, + }, +}; + +static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = { + .mode_list = mx23evk_video_modes, + .mode_count = ARRAY_SIZE(mx23evk_video_modes), + .default_bpp = 32, + .ld_intf_width = STMLCDIF_24BIT, }; static void __init mx23evk_init(void) { + int ret; + mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads)); mx23_add_duart(); + mx23_add_auart0(); + + ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable"); + if (ret) + pr_warn("failed to request gpio lcd-enable: %d\n", ret); + else + gpio_set_value(MX23EVK_LCD_ENABLE, 1); + + ret = gpio_request_one(MX23EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable"); + if (ret) + pr_warn("failed to request gpio bl-enable: %d\n", ret); + else + gpio_set_value(MX23EVK_BL_ENABLE, 1); + + mx23_add_mxsfb(&mx23evk_mxsfb_pdata); } static void __init mx23evk_timer_init(void) diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index 8e2c5975001..08002d02267 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -28,54 +28,93 @@ #include "devices-mx28.h" #include "gpio.h" +#define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13) #define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15) +#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18) +#define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30) #define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13) static const iomux_cfg_t mx28evk_pads[] __initconst = { /* duart */ - MX28_PAD_PWM0__DUART_RX | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX28_PAD_PWM1__DUART_TX | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, + MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL, + /* auart0 */ + MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL, + MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL, + MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL, + MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL, + /* auart3 */ + MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL, + MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL, + MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL, + MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL, + +#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP) /* fec0 */ - MX28_PAD_ENET0_MDC__ENET0_MDC | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_MDIO__ENET0_MDIO | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_RXD0__ENET0_RXD0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_RXD1__ENET0_RXD1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_TXD0__ENET0_TXD0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_TXD1__ENET0_TXD1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET_CLK__CLKCTRL_ENET | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC, + MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC, + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC, + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC, + MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC, /* fec1 */ - MX28_PAD_ENET0_CRS__ENET1_RX_EN | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_RXD2__ENET1_RXD0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_RXD3__ENET1_RXD1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_COL__ENET1_TX_EN | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_TXD2__ENET1_TXD0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_ENET0_TXD3__ENET1_TXD1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC, + MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC, /* phy power line */ - MX28_PAD_SSP1_DATA3__GPIO_2_15 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_SSP1_DATA3__GPIO_2_15 | MXS_PAD_CTRL, /* phy reset line */ - MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | MXS_PAD_CTRL, + + /* flexcan0 */ + MX28_PAD_GPMI_RDY2__CAN0_TX, + MX28_PAD_GPMI_RDY3__CAN0_RX, + /* flexcan1 */ + MX28_PAD_GPMI_CE2N__CAN1_TX, + MX28_PAD_GPMI_CE3N__CAN1_RX, + /* transceiver power control */ + MX28_PAD_SSP1_CMD__GPIO_2_13, + + /* mxsfb (lcdif) */ + MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL, + MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL, + MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL, + MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL, + MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL, + MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL, + MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL, + MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL, + MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL, + MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL, + MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL, + MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL, + MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL, + MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL, + MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL, + MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL, + MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL, + MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL, + MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL, + MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL, + MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL, + MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL, + MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL, + MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL, + MX28_PAD_LCD_RD_E__LCD_VSYNC | MXS_PAD_CTRL, + MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MXS_PAD_CTRL, + MX28_PAD_LCD_RS__LCD_DOTCLK | MXS_PAD_CTRL, + MX28_PAD_LCD_CS__LCD_ENABLE | MXS_PAD_CTRL, + /* LCD panel enable */ + MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL, + /* backlight control */ + MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL, }; /* fec */ @@ -119,7 +158,7 @@ static void __init mx28evk_fec_reset(void) gpio_set_value(MX28EVK_FEC_PHY_RESET, 1); } -static struct fec_platform_data mx28_fec_pdata[] = { +static struct fec_platform_data mx28_fec_pdata[] __initdata = { { /* fec0 */ .phy = PHY_INTERFACE_MODE_RMII, @@ -129,15 +168,135 @@ static struct fec_platform_data mx28_fec_pdata[] = { }, }; +static int __init mx28evk_fec_get_mac(void) +{ + int i; + u32 val; + const u32 *ocotp = mxs_get_ocotp(); + + if (!ocotp) + goto error; + + /* + * OCOTP only stores the last 4 octets for each mac address, + * so hard-code Freescale OUI (00:04:9f) here. + */ + for (i = 0; i < 2; i++) { + val = ocotp[i * 4]; + mx28_fec_pdata[i].mac[0] = 0x00; + mx28_fec_pdata[i].mac[1] = 0x04; + mx28_fec_pdata[i].mac[2] = 0x9f; + mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff; + mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff; + mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff; + } + + return 0; + +error: + pr_err("%s: timeout when reading fec mac from OCOTP\n", __func__); + return -ETIMEDOUT; +} + +/* + * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers + */ +static int flexcan0_en, flexcan1_en; + +static void mx28evk_flexcan_switch(void) +{ + if (flexcan0_en || flexcan1_en) + gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1); + else + gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0); +} + +static void mx28evk_flexcan0_switch(int enable) +{ + flexcan0_en = enable; + mx28evk_flexcan_switch(); +} + +static void mx28evk_flexcan1_switch(int enable) +{ + flexcan1_en = enable; + mx28evk_flexcan_switch(); +} + +static const struct flexcan_platform_data + mx28evk_flexcan_pdata[] __initconst = { + { + .transceiver_switch = mx28evk_flexcan0_switch, + }, { + .transceiver_switch = mx28evk_flexcan1_switch, + } +}; + +/* mxsfb (lcdif) */ +static struct fb_videomode mx28evk_video_modes[] = { + { + .name = "Seiko-43WVF1G", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 29851, /* picosecond (33.5 MHz) */ + .left_margin = 89, + .right_margin = 164, + .upper_margin = 23, + .lower_margin = 10, + .hsync_len = 10, + .vsync_len = 10, + .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | + FB_SYNC_DOTCLK_FAILING_ACT, + }, +}; + +static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = { + .mode_list = mx28evk_video_modes, + .mode_count = ARRAY_SIZE(mx28evk_video_modes), + .default_bpp = 32, + .ld_intf_width = STMLCDIF_24BIT, +}; + static void __init mx28evk_init(void) { + int ret; + mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads)); mx28_add_duart(); + mx28_add_auart0(); + mx28_add_auart3(); + + if (mx28evk_fec_get_mac()) + pr_warn("%s: failed on fec mac setup\n", __func__); mx28evk_fec_reset(); mx28_add_fec(0, &mx28_fec_pdata[0]); mx28_add_fec(1, &mx28_fec_pdata[1]); + + ret = gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, + "flexcan-switch"); + if (ret) { + pr_err("failed to request gpio flexcan-switch: %d\n", ret); + } else { + mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]); + mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]); + } + + ret = gpio_request_one(MX28EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable"); + if (ret) + pr_warn("failed to request gpio lcd-enable: %d\n", ret); + else + gpio_set_value(MX28EVK_LCD_ENABLE, 1); + + ret = gpio_request_one(MX28EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable"); + if (ret) + pr_warn("failed to request gpio bl-enable: %d\n", ret); + else + gpio_set_value(MX28EVK_BL_ENABLE, 1); + + mx28_add_mxsfb(&mx28evk_mxsfb_pdata); } static void __init mx28evk_timer_init(void) diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c new file mode 100644 index 00000000000..b65e3719cbc --- /dev/null +++ b/arch/arm/mach-mxs/mach-tx28.c @@ -0,0 +1,183 @@ +/* + * Copyright (C) 2010 <LW@KARO-electronics.de> + * + * based on: mach-mx28_evk.c + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation + */ +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> +#include <linux/i2c.h> + +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <mach/common.h> +#include <mach/iomux-mx28.h> + +#include "devices-mx28.h" +#include "module-tx28.h" + +#define TX28_STK5_GPIO_LED MXS_GPIO_NR(4, 10) + +static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = { + /* LED */ + MX28_PAD_ENET0_RXD3__GPIO_4_10 | + MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL, + + /* framebuffer */ +#define LCD_MODE (MXS_PAD_3V3 | MXS_PAD_4MA) + MX28_PAD_LCD_D00__LCD_D0 | LCD_MODE, + MX28_PAD_LCD_D01__LCD_D1 | LCD_MODE, + MX28_PAD_LCD_D02__LCD_D2 | LCD_MODE, + MX28_PAD_LCD_D03__LCD_D3 | LCD_MODE, + MX28_PAD_LCD_D04__LCD_D4 | LCD_MODE, + MX28_PAD_LCD_D05__LCD_D5 | LCD_MODE, + MX28_PAD_LCD_D06__LCD_D6 | LCD_MODE, + MX28_PAD_LCD_D07__LCD_D7 | LCD_MODE, + MX28_PAD_LCD_D08__LCD_D8 | LCD_MODE, + MX28_PAD_LCD_D09__LCD_D9 | LCD_MODE, + MX28_PAD_LCD_D10__LCD_D10 | LCD_MODE, + MX28_PAD_LCD_D11__LCD_D11 | LCD_MODE, + MX28_PAD_LCD_D12__LCD_D12 | LCD_MODE, + MX28_PAD_LCD_D13__LCD_D13 | LCD_MODE, + MX28_PAD_LCD_D14__LCD_D14 | LCD_MODE, + MX28_PAD_LCD_D15__LCD_D15 | LCD_MODE, + MX28_PAD_LCD_D16__LCD_D16 | LCD_MODE, + MX28_PAD_LCD_D17__LCD_D17 | LCD_MODE, + MX28_PAD_LCD_D18__LCD_D18 | LCD_MODE, + MX28_PAD_LCD_D19__LCD_D19 | LCD_MODE, + MX28_PAD_LCD_D20__LCD_D20 | LCD_MODE, + MX28_PAD_LCD_D21__LCD_D21 | LCD_MODE, + MX28_PAD_LCD_D22__LCD_D22 | LCD_MODE, + MX28_PAD_LCD_D23__LCD_D23 | LCD_MODE, + MX28_PAD_LCD_RD_E__LCD_VSYNC | LCD_MODE, + MX28_PAD_LCD_WR_RWN__LCD_HSYNC | LCD_MODE, + MX28_PAD_LCD_RS__LCD_DOTCLK | LCD_MODE, + MX28_PAD_LCD_CS__LCD_CS | LCD_MODE, + MX28_PAD_LCD_VSYNC__LCD_VSYNC | LCD_MODE, + MX28_PAD_LCD_HSYNC__LCD_HSYNC | LCD_MODE, + MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | LCD_MODE, + MX28_PAD_LCD_ENABLE__GPIO_1_31 | LCD_MODE, + MX28_PAD_LCD_RESET__GPIO_3_30 | LCD_MODE, + MX28_PAD_PWM0__PWM_0 | LCD_MODE, + + /* UART1 */ + MX28_PAD_AUART0_CTS__DUART_RX, + MX28_PAD_AUART0_RTS__DUART_TX, + MX28_PAD_AUART0_TX__DUART_RTS, + MX28_PAD_AUART0_RX__DUART_CTS, + + /* UART2 */ + MX28_PAD_AUART1_RX__AUART1_RX, + MX28_PAD_AUART1_TX__AUART1_TX, + MX28_PAD_AUART1_RTS__AUART1_RTS, + MX28_PAD_AUART1_CTS__AUART1_CTS, + + /* CAN */ + MX28_PAD_GPMI_RDY2__CAN0_TX, + MX28_PAD_GPMI_RDY3__CAN0_RX, + + /* I2C */ + MX28_PAD_I2C0_SCL__I2C0_SCL, + MX28_PAD_I2C0_SDA__I2C0_SDA, + + /* TSC2007 */ + MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP, + + /* MMC0 */ + MX28_PAD_SSP0_DATA0__SSP0_D0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA1__SSP0_D1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA2__SSP0_D2 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA3__SSP0_D3 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA4__SSP0_D4 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA5__SSP0_D5 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA6__SSP0_D6 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA7__SSP0_D7 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_CMD__SSP0_CMD | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_SSP0_SCK__SSP0_SCK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), +}; + +static struct gpio_led tx28_stk5v3_leds[] = { + { + .name = "GPIO-LED", + .default_trigger = "heartbeat", + .gpio = TX28_STK5_GPIO_LED, + }, +}; + +static const struct gpio_led_platform_data tx28_stk5v3_led_data __initconst = { + .leds = tx28_stk5v3_leds, + .num_leds = ARRAY_SIZE(tx28_stk5v3_leds), +}; + +static struct spi_board_info tx28_spi_board_info[] = { + { + .modalias = "spidev", + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 1, + .controller_data = (void *)SPI_GPIO_NO_CHIPSELECT, + .mode = SPI_MODE_0, + }, +}; + +static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = { + { + I2C_BOARD_INFO("ds1339", 0x68), + }, +}; + +static void __init tx28_stk5v3_init(void) +{ + mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads, + ARRAY_SIZE(tx28_stk5v3_pads)); + + mx28_add_duart(); /* UART1 */ + mx28_add_auart(1); /* UART2 */ + + tx28_add_fec0(); + /* spi via ssp will be added when available */ + spi_register_board_info(tx28_spi_board_info, + ARRAY_SIZE(tx28_spi_board_info)); + mxs_add_platform_device("leds-gpio", 0, NULL, 0, + &tx28_stk5v3_led_data, sizeof(tx28_stk5v3_led_data)); + mx28_add_mxs_i2c(0); + i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo, + ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo)); +} + +static void __init tx28_timer_init(void) +{ + mx28_clocks_init(); +} + +static struct sys_timer tx28_timer = { + .init = tx28_timer_init, +}; + +MACHINE_START(TX28, "Ka-Ro electronics TX28 module") + .map_io = mx28_map_io, + .init_irq = mx28_init_irq, + .init_machine = tx28_stk5v3_init, + .timer = &tx28_timer, +MACHINE_END diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c new file mode 100644 index 00000000000..fa0b154da67 --- /dev/null +++ b/arch/arm/mach-mxs/module-tx28.c @@ -0,0 +1,131 @@ +/* + * Copyright (C) 2010 <LW@KARO-electronics.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/fec.h> +#include <linux/gpio.h> + +#include <mach/iomux-mx28.h> +#include "../devices-mx28.h" + +#include "module-tx28.h" + +#define TX28_FEC_PHY_POWER MXS_GPIO_NR(3, 29) +#define TX28_FEC_PHY_RESET MXS_GPIO_NR(4, 13) + +static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = { + /* PHY POWER */ + MX28_PAD_PWM4__GPIO_3_29 | + MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3, + /* PHY RESET */ + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | + MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3, + /* Mode strap pins 0-2 */ + MX28_PAD_ENET0_RXD0__GPIO_4_3 | + MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3, + MX28_PAD_ENET0_RXD1__GPIO_4_4 | + MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3, + MX28_PAD_ENET0_RX_EN__GPIO_4_2 | + MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3, + /* nINT */ + MX28_PAD_ENET0_TX_CLK__GPIO_4_5 | + MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3, + + MX28_PAD_ENET0_MDC__GPIO_4_0, + MX28_PAD_ENET0_MDIO__GPIO_4_1, + MX28_PAD_ENET0_TX_EN__GPIO_4_6, + MX28_PAD_ENET0_TXD0__GPIO_4_7, + MX28_PAD_ENET0_TXD1__GPIO_4_8, + MX28_PAD_ENET_CLK__GPIO_4_16, +}; + +#define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3) +static const iomux_cfg_t tx28_fec_pads[] __initconst = { + MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE, + MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE, + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE, + MX28_PAD_ENET0_RXD0__ENET0_RXD0 | FEC_MODE, + MX28_PAD_ENET0_RXD1__ENET0_RXD1 | FEC_MODE, + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | FEC_MODE, + MX28_PAD_ENET0_TXD0__ENET0_TXD0 | FEC_MODE, + MX28_PAD_ENET0_TXD1__ENET0_TXD1 | FEC_MODE, + MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE, +}; + +static const struct fec_platform_data tx28_fec_data __initconst = { + .phy = PHY_INTERFACE_MODE_RMII, +}; + +int __init tx28_add_fec0(void) +{ + int i, ret; + + pr_debug("%s: Switching FEC PHY power off\n", __func__); + ret = mxs_iomux_setup_multiple_pads(tx28_fec_gpio_pads, + ARRAY_SIZE(tx28_fec_gpio_pads)); + for (i = 0; i < ARRAY_SIZE(tx28_fec_gpio_pads); i++) { + unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]), + PAD_PIN(tx28_fec_gpio_pads[i])); + + ret = gpio_request(gpio, "FEC"); + if (ret) { + pr_err("Failed to request GPIO_%d_%d: %d\n", + PAD_BANK(tx28_fec_gpio_pads[i]), + PAD_PIN(tx28_fec_gpio_pads[i]), ret); + goto free_gpios; + } + ret = gpio_direction_output(gpio, 0); + if (ret) { + pr_err("Failed to set direction of GPIO_%d_%d to output: %d\n", + gpio / 32 + 1, gpio % 32, ret); + goto free_gpios; + } + } + + /* Power up fec phy */ + pr_debug("%s: Switching FEC PHY power on\n", __func__); + ret = gpio_direction_output(TX28_FEC_PHY_POWER, 1); + if (ret) { + pr_err("Failed to power on PHY: %d\n", ret); + goto free_gpios; + } + mdelay(26); /* 25ms according to data sheet */ + + /* nINT */ + gpio_direction_input(MXS_GPIO_NR(4, 5)); + /* Mode strap pins */ + gpio_direction_output(MXS_GPIO_NR(4, 2), 1); + gpio_direction_output(MXS_GPIO_NR(4, 3), 1); + gpio_direction_output(MXS_GPIO_NR(4, 4), 1); + + udelay(100); /* minimum assertion time for nRST */ + + pr_debug("%s: Deasserting FEC PHY RESET\n", __func__); + gpio_set_value(TX28_FEC_PHY_RESET, 1); + + ret = mxs_iomux_setup_multiple_pads(tx28_fec_pads, + ARRAY_SIZE(tx28_fec_pads)); + if (ret) { + pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n", + __func__, ret); + goto free_gpios; + } + pr_debug("%s: Registering FEC device\n", __func__); + mx28_add_fec(0, &tx28_fec_data); + return 0; + +free_gpios: + while (--i >= 0) { + unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]), + PAD_PIN(tx28_fec_gpio_pads[i])); + + gpio_free(gpio); + } + + return ret; +} diff --git a/arch/arm/mach-mxs/module-tx28.h b/arch/arm/mach-mxs/module-tx28.h new file mode 100644 index 00000000000..df9e1b6e81b --- /dev/null +++ b/arch/arm/mach-mxs/module-tx28.h @@ -0,0 +1,9 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +int __init tx28_add_fec0(void); diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c new file mode 100644 index 00000000000..65157a35dbb --- /dev/null +++ b/arch/arm/mach-mxs/ocotp.c @@ -0,0 +1,90 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/mutex.h> + +#include <mach/mxs.h> + +#define OCOTP_WORD_OFFSET 0x20 +#define OCOTP_WORD_COUNT 0x20 + +#define BM_OCOTP_CTRL_BUSY (1 << 8) +#define BM_OCOTP_CTRL_ERROR (1 << 9) +#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12) + +static DEFINE_MUTEX(ocotp_mutex); +static u32 ocotp_words[OCOTP_WORD_COUNT]; + +const u32 *mxs_get_ocotp(void) +{ + void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR); + int timeout = 0x400; + size_t i; + static int once = 0; + + if (once) + return ocotp_words; + + mutex_lock(&ocotp_mutex); + + /* + * clk_enable(hbus_clk) for ocotp can be skipped + * as it must be on when system is running. + */ + + /* try to clear ERROR bit */ + __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base); + + /* check both BUSY and ERROR cleared */ + while ((__raw_readl(ocotp_base) & + (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout) + cpu_relax(); + + if (unlikely(!timeout)) + goto error_unlock; + + /* open OCOTP banks for read */ + __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); + + /* approximately wait 32 hclk cycles */ + udelay(1); + + /* poll BUSY bit becoming cleared */ + timeout = 0x400; + while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout) + cpu_relax(); + + if (unlikely(!timeout)) + goto error_unlock; + + for (i = 0; i < OCOTP_WORD_COUNT; i++) + ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET + + i * 0x10); + + /* close banks for power saving */ + __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); + + once = 1; + + mutex_unlock(&ocotp_mutex); + + return ocotp_words; + +error_unlock: + mutex_unlock(&ocotp_mutex); + pr_err("%s: timeout in reading OCOTP\n", __func__); + return NULL; +} diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c new file mode 100644 index 00000000000..fb042da29bd --- /dev/null +++ b/arch/arm/mach-mxs/pm.c @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/suspend.h> +#include <linux/io.h> +#include <mach/system.h> + +static int mxs_suspend_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + arch_idle(); + break; + + default: + return -EINVAL; + } + return 0; +} + +static struct platform_suspend_ops mxs_suspend_ops = { + .enter = mxs_suspend_enter, + .valid = suspend_valid_only_mem, +}; + +static int __init mxs_pm_init(void) +{ + suspend_set_ops(&mxs_suspend_ops); + return 0; +} +device_initcall(mxs_pm_init); diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx23.h b/arch/arm/mach-mxs/regs-clkctrl-mx23.h index dbc04747b69..0ea5c9d0e2b 100644 --- a/arch/arm/mach-mxs/regs-clkctrl-mx23.h +++ b/arch/arm/mach-mxs/regs-clkctrl-mx23.h @@ -33,10 +33,6 @@ #define HW_CLKCTRL_PLLCTRL0_CLR (0x00000008) #define HW_CLKCTRL_PLLCTRL0_TOG (0x0000000c) -#define BP_CLKCTRL_PLLCTRL0_RSRVD6 30 -#define BM_CLKCTRL_PLLCTRL0_RSRVD6 0xC0000000 -#define BF_CLKCTRL_PLLCTRL0_RSRVD6(v) \ - (((v) << 30) & BM_CLKCTRL_PLLCTRL0_RSRVD6) #define BP_CLKCTRL_PLLCTRL0_LFR_SEL 28 #define BM_CLKCTRL_PLLCTRL0_LFR_SEL 0x30000000 #define BF_CLKCTRL_PLLCTRL0_LFR_SEL(v) \ @@ -45,10 +41,6 @@ #define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_2 0x1 #define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_05 0x2 #define BV_CLKCTRL_PLLCTRL0_LFR_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLLCTRL0_RSRVD5 26 -#define BM_CLKCTRL_PLLCTRL0_RSRVD5 0x0C000000 -#define BF_CLKCTRL_PLLCTRL0_RSRVD5(v) \ - (((v) << 26) & BM_CLKCTRL_PLLCTRL0_RSRVD5) #define BP_CLKCTRL_PLLCTRL0_CP_SEL 24 #define BM_CLKCTRL_PLLCTRL0_CP_SEL 0x03000000 #define BF_CLKCTRL_PLLCTRL0_CP_SEL(v) \ @@ -57,10 +49,6 @@ #define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_2 0x1 #define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_05 0x2 #define BV_CLKCTRL_PLLCTRL0_CP_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLLCTRL0_RSRVD4 22 -#define BM_CLKCTRL_PLLCTRL0_RSRVD4 0x00C00000 -#define BF_CLKCTRL_PLLCTRL0_RSRVD4(v) \ - (((v) << 22) & BM_CLKCTRL_PLLCTRL0_RSRVD4) #define BP_CLKCTRL_PLLCTRL0_DIV_SEL 20 #define BM_CLKCTRL_PLLCTRL0_DIV_SEL 0x00300000 #define BF_CLKCTRL_PLLCTRL0_DIV_SEL(v) \ @@ -69,23 +57,13 @@ #define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWER 0x1 #define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWEST 0x2 #define BV_CLKCTRL_PLLCTRL0_DIV_SEL__UNDEFINED 0x3 -#define BM_CLKCTRL_PLLCTRL0_RSRVD3 0x00080000 #define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000 -#define BM_CLKCTRL_PLLCTRL0_RSRVD2 0x00020000 #define BM_CLKCTRL_PLLCTRL0_POWER 0x00010000 -#define BP_CLKCTRL_PLLCTRL0_RSRVD1 0 -#define BM_CLKCTRL_PLLCTRL0_RSRVD1 0x0000FFFF -#define BF_CLKCTRL_PLLCTRL0_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_PLLCTRL0_RSRVD1) #define HW_CLKCTRL_PLLCTRL1 (0x00000010) #define BM_CLKCTRL_PLLCTRL1_LOCK 0x80000000 #define BM_CLKCTRL_PLLCTRL1_FORCE_LOCK 0x40000000 -#define BP_CLKCTRL_PLLCTRL1_RSRVD1 16 -#define BM_CLKCTRL_PLLCTRL1_RSRVD1 0x3FFF0000 -#define BF_CLKCTRL_PLLCTRL1_RSRVD1(v) \ - (((v) << 16) & BM_CLKCTRL_PLLCTRL1_RSRVD1) #define BP_CLKCTRL_PLLCTRL1_LOCK_COUNT 0 #define BM_CLKCTRL_PLLCTRL1_LOCK_COUNT 0x0000FFFF #define BF_CLKCTRL_PLLCTRL1_LOCK_COUNT(v) \ @@ -96,29 +74,15 @@ #define HW_CLKCTRL_CPU_CLR (0x00000028) #define HW_CLKCTRL_CPU_TOG (0x0000002c) -#define BP_CLKCTRL_CPU_RSRVD5 30 -#define BM_CLKCTRL_CPU_RSRVD5 0xC0000000 -#define BF_CLKCTRL_CPU_RSRVD5(v) \ - (((v) << 30) & BM_CLKCTRL_CPU_RSRVD5) #define BM_CLKCTRL_CPU_BUSY_REF_XTAL 0x20000000 #define BM_CLKCTRL_CPU_BUSY_REF_CPU 0x10000000 -#define BM_CLKCTRL_CPU_RSRVD4 0x08000000 #define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN 0x04000000 #define BP_CLKCTRL_CPU_DIV_XTAL 16 #define BM_CLKCTRL_CPU_DIV_XTAL 0x03FF0000 #define BF_CLKCTRL_CPU_DIV_XTAL(v) \ (((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL) -#define BP_CLKCTRL_CPU_RSRVD3 13 -#define BM_CLKCTRL_CPU_RSRVD3 0x0000E000 -#define BF_CLKCTRL_CPU_RSRVD3(v) \ - (((v) << 13) & BM_CLKCTRL_CPU_RSRVD3) #define BM_CLKCTRL_CPU_INTERRUPT_WAIT 0x00001000 -#define BM_CLKCTRL_CPU_RSRVD2 0x00000800 #define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN 0x00000400 -#define BP_CLKCTRL_CPU_RSRVD1 6 -#define BM_CLKCTRL_CPU_RSRVD1 0x000003C0 -#define BF_CLKCTRL_CPU_RSRVD1(v) \ - (((v) << 6) & BM_CLKCTRL_CPU_RSRVD1) #define BP_CLKCTRL_CPU_DIV_CPU 0 #define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F #define BF_CLKCTRL_CPU_DIV_CPU(v) \ @@ -129,10 +93,6 @@ #define HW_CLKCTRL_HBUS_CLR (0x00000038) #define HW_CLKCTRL_HBUS_TOG (0x0000003c) -#define BP_CLKCTRL_HBUS_RSRVD4 30 -#define BM_CLKCTRL_HBUS_RSRVD4 0xC0000000 -#define BF_CLKCTRL_HBUS_RSRVD4(v) \ - (((v) << 30) & BM_CLKCTRL_HBUS_RSRVD4) #define BM_CLKCTRL_HBUS_BUSY 0x20000000 #define BM_CLKCTRL_HBUS_DCP_AS_ENABLE 0x10000000 #define BM_CLKCTRL_HBUS_PXP_AS_ENABLE 0x08000000 @@ -143,7 +103,6 @@ #define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE 0x00400000 #define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE 0x00200000 #define BM_CLKCTRL_HBUS_AUTO_SLOW_MODE 0x00100000 -#define BM_CLKCTRL_HBUS_RSRVD2 0x00080000 #define BP_CLKCTRL_HBUS_SLOW_DIV 16 #define BM_CLKCTRL_HBUS_SLOW_DIV 0x00070000 #define BF_CLKCTRL_HBUS_SLOW_DIV(v) \ @@ -154,10 +113,6 @@ #define BV_CLKCTRL_HBUS_SLOW_DIV__BY8 0x3 #define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4 #define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5 -#define BP_CLKCTRL_HBUS_RSRVD1 6 -#define BM_CLKCTRL_HBUS_RSRVD1 0x0000FFC0 -#define BF_CLKCTRL_HBUS_RSRVD1(v) \ - (((v) << 6) & BM_CLKCTRL_HBUS_RSRVD1) #define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020 #define BP_CLKCTRL_HBUS_DIV 0 #define BM_CLKCTRL_HBUS_DIV 0x0000001F @@ -167,10 +122,6 @@ #define HW_CLKCTRL_XBUS (0x00000040) #define BM_CLKCTRL_XBUS_BUSY 0x80000000 -#define BP_CLKCTRL_XBUS_RSRVD1 11 -#define BM_CLKCTRL_XBUS_RSRVD1 0x7FFFF800 -#define BF_CLKCTRL_XBUS_RSRVD1(v) \ - (((v) << 11) & BM_CLKCTRL_XBUS_RSRVD1) #define BM_CLKCTRL_XBUS_DIV_FRAC_EN 0x00000400 #define BP_CLKCTRL_XBUS_DIV 0 #define BM_CLKCTRL_XBUS_DIV 0x000003FF @@ -192,10 +143,6 @@ #define BM_CLKCTRL_XTAL_DIGCTRL_CLK1M_GATE 0x08000000 #define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 26 #define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 0x04000000 -#define BP_CLKCTRL_XTAL_RSRVD1 2 -#define BM_CLKCTRL_XTAL_RSRVD1 0x03FFFFFC -#define BF_CLKCTRL_XTAL_RSRVD1(v) \ - (((v) << 2) & BM_CLKCTRL_XTAL_RSRVD1) #define BP_CLKCTRL_XTAL_DIV_UART 0 #define BM_CLKCTRL_XTAL_DIV_UART 0x00000003 #define BF_CLKCTRL_XTAL_DIV_UART(v) \ @@ -205,12 +152,7 @@ #define BP_CLKCTRL_PIX_CLKGATE 31 #define BM_CLKCTRL_PIX_CLKGATE 0x80000000 -#define BM_CLKCTRL_PIX_RSRVD2 0x40000000 #define BM_CLKCTRL_PIX_BUSY 0x20000000 -#define BP_CLKCTRL_PIX_RSRVD1 13 -#define BM_CLKCTRL_PIX_RSRVD1 0x1FFFE000 -#define BF_CLKCTRL_PIX_RSRVD1(v) \ - (((v) << 13) & BM_CLKCTRL_PIX_RSRVD1) #define BM_CLKCTRL_PIX_DIV_FRAC_EN 0x00001000 #define BP_CLKCTRL_PIX_DIV 0 #define BM_CLKCTRL_PIX_DIV 0x00000FFF @@ -221,12 +163,7 @@ #define BP_CLKCTRL_SSP_CLKGATE 31 #define BM_CLKCTRL_SSP_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP_RSRVD2 0x40000000 #define BM_CLKCTRL_SSP_BUSY 0x20000000 -#define BP_CLKCTRL_SSP_RSRVD1 10 -#define BM_CLKCTRL_SSP_RSRVD1 0x1FFFFC00 -#define BF_CLKCTRL_SSP_RSRVD1(v) \ - (((v) << 10) & BM_CLKCTRL_SSP_RSRVD1) #define BM_CLKCTRL_SSP_DIV_FRAC_EN 0x00000200 #define BP_CLKCTRL_SSP_DIV 0 #define BM_CLKCTRL_SSP_DIV 0x000001FF @@ -237,12 +174,7 @@ #define BP_CLKCTRL_GPMI_CLKGATE 31 #define BM_CLKCTRL_GPMI_CLKGATE 0x80000000 -#define BM_CLKCTRL_GPMI_RSRVD2 0x40000000 #define BM_CLKCTRL_GPMI_BUSY 0x20000000 -#define BP_CLKCTRL_GPMI_RSRVD1 11 -#define BM_CLKCTRL_GPMI_RSRVD1 0x1FFFF800 -#define BF_CLKCTRL_GPMI_RSRVD1(v) \ - (((v) << 11) & BM_CLKCTRL_GPMI_RSRVD1) #define BM_CLKCTRL_GPMI_DIV_FRAC_EN 0x00000400 #define BP_CLKCTRL_GPMI_DIV 0 #define BM_CLKCTRL_GPMI_DIV 0x000003FF @@ -252,10 +184,6 @@ #define HW_CLKCTRL_SPDIF (0x00000090) #define BM_CLKCTRL_SPDIF_CLKGATE 0x80000000 -#define BP_CLKCTRL_SPDIF_RSRVD 0 -#define BM_CLKCTRL_SPDIF_RSRVD 0x7FFFFFFF -#define BF_CLKCTRL_SPDIF_RSRVD(v) \ - (((v) << 0) & BM_CLKCTRL_SPDIF_RSRVD) #define HW_CLKCTRL_EMI (0x000000a0) @@ -266,24 +194,12 @@ #define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000 #define BM_CLKCTRL_EMI_BUSY_REF_CPU 0x08000000 #define BM_CLKCTRL_EMI_BUSY_SYNC_MODE 0x04000000 -#define BP_CLKCTRL_EMI_RSRVD3 18 -#define BM_CLKCTRL_EMI_RSRVD3 0x03FC0000 -#define BF_CLKCTRL_EMI_RSRVD3(v) \ - (((v) << 18) & BM_CLKCTRL_EMI_RSRVD3) #define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000 #define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000 -#define BP_CLKCTRL_EMI_RSRVD2 12 -#define BM_CLKCTRL_EMI_RSRVD2 0x0000F000 -#define BF_CLKCTRL_EMI_RSRVD2(v) \ - (((v) << 12) & BM_CLKCTRL_EMI_RSRVD2) #define BP_CLKCTRL_EMI_DIV_XTAL 8 #define BM_CLKCTRL_EMI_DIV_XTAL 0x00000F00 #define BF_CLKCTRL_EMI_DIV_XTAL(v) \ (((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL) -#define BP_CLKCTRL_EMI_RSRVD1 6 -#define BM_CLKCTRL_EMI_RSRVD1 0x000000C0 -#define BF_CLKCTRL_EMI_RSRVD1(v) \ - (((v) << 6) & BM_CLKCTRL_EMI_RSRVD1) #define BP_CLKCTRL_EMI_DIV_EMI 0 #define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F #define BF_CLKCTRL_EMI_DIV_EMI(v) \ @@ -292,22 +208,13 @@ #define HW_CLKCTRL_IR (0x000000b0) #define BM_CLKCTRL_IR_CLKGATE 0x80000000 -#define BM_CLKCTRL_IR_RSRVD3 0x40000000 #define BM_CLKCTRL_IR_AUTO_DIV 0x20000000 #define BM_CLKCTRL_IR_IR_BUSY 0x10000000 #define BM_CLKCTRL_IR_IROV_BUSY 0x08000000 -#define BP_CLKCTRL_IR_RSRVD2 25 -#define BM_CLKCTRL_IR_RSRVD2 0x06000000 -#define BF_CLKCTRL_IR_RSRVD2(v) \ - (((v) << 25) & BM_CLKCTRL_IR_RSRVD2) #define BP_CLKCTRL_IR_IROV_DIV 16 #define BM_CLKCTRL_IR_IROV_DIV 0x01FF0000 #define BF_CLKCTRL_IR_IROV_DIV(v) \ (((v) << 16) & BM_CLKCTRL_IR_IROV_DIV) -#define BP_CLKCTRL_IR_RSRVD1 10 -#define BM_CLKCTRL_IR_RSRVD1 0x0000FC00 -#define BF_CLKCTRL_IR_RSRVD1(v) \ - (((v) << 10) & BM_CLKCTRL_IR_RSRVD1) #define BP_CLKCTRL_IR_IR_DIV 0 #define BM_CLKCTRL_IR_IR_DIV 0x000003FF #define BF_CLKCTRL_IR_IR_DIV(v) \ @@ -316,12 +223,7 @@ #define HW_CLKCTRL_SAIF (0x000000c0) #define BM_CLKCTRL_SAIF_CLKGATE 0x80000000 -#define BM_CLKCTRL_SAIF_RSRVD2 0x40000000 #define BM_CLKCTRL_SAIF_BUSY 0x20000000 -#define BP_CLKCTRL_SAIF_RSRVD1 17 -#define BM_CLKCTRL_SAIF_RSRVD1 0x1FFE0000 -#define BF_CLKCTRL_SAIF_RSRVD1(v) \ - (((v) << 17) & BM_CLKCTRL_SAIF_RSRVD1) #define BM_CLKCTRL_SAIF_DIV_FRAC_EN 0x00010000 #define BP_CLKCTRL_SAIF_DIV 0 #define BM_CLKCTRL_SAIF_DIV 0x0000FFFF @@ -332,20 +234,11 @@ #define BM_CLKCTRL_TV_CLK_TV108M_GATE 0x80000000 #define BM_CLKCTRL_TV_CLK_TV_GATE 0x40000000 -#define BP_CLKCTRL_TV_RSRVD 0 -#define BM_CLKCTRL_TV_RSRVD 0x3FFFFFFF -#define BF_CLKCTRL_TV_RSRVD(v) \ - (((v) << 0) & BM_CLKCTRL_TV_RSRVD) #define HW_CLKCTRL_ETM (0x000000e0) #define BM_CLKCTRL_ETM_CLKGATE 0x80000000 -#define BM_CLKCTRL_ETM_RSRVD2 0x40000000 #define BM_CLKCTRL_ETM_BUSY 0x20000000 -#define BP_CLKCTRL_ETM_RSRVD1 7 -#define BM_CLKCTRL_ETM_RSRVD1 0x1FFFFF80 -#define BF_CLKCTRL_ETM_RSRVD1(v) \ - (((v) << 7) & BM_CLKCTRL_ETM_RSRVD1) #define BM_CLKCTRL_ETM_DIV_FRAC_EN 0x00000040 #define BP_CLKCTRL_ETM_DIV 0 #define BM_CLKCTRL_ETM_DIV 0x0000003F @@ -393,36 +286,23 @@ #define BM_CLKCTRL_FRAC1_CLKGATEVID 0x80000000 #define BM_CLKCTRL_FRAC1_VID_STABLE 0x40000000 -#define BP_CLKCTRL_FRAC1_RSRVD1 0 -#define BM_CLKCTRL_FRAC1_RSRVD1 0x3FFFFFFF -#define BF_CLKCTRL_FRAC1_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_FRAC1_RSRVD1) #define HW_CLKCTRL_CLKSEQ (0x00000110) #define HW_CLKCTRL_CLKSEQ_SET (0x00000114) #define HW_CLKCTRL_CLKSEQ_CLR (0x00000118) #define HW_CLKCTRL_CLKSEQ_TOG (0x0000011c) -#define BP_CLKCTRL_CLKSEQ_RSRVD1 9 -#define BM_CLKCTRL_CLKSEQ_RSRVD1 0xFFFFFE00 -#define BF_CLKCTRL_CLKSEQ_RSRVD1(v) \ - (((v) << 9) & BM_CLKCTRL_CLKSEQ_RSRVD1) #define BM_CLKCTRL_CLKSEQ_BYPASS_ETM 0x00000100 #define BM_CLKCTRL_CLKSEQ_BYPASS_CPU 0x00000080 #define BM_CLKCTRL_CLKSEQ_BYPASS_EMI 0x00000040 #define BM_CLKCTRL_CLKSEQ_BYPASS_SSP 0x00000020 #define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI 0x00000010 #define BM_CLKCTRL_CLKSEQ_BYPASS_IR 0x00000008 -#define BM_CLKCTRL_CLKSEQ_RSRVD0 0x00000004 #define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002 #define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF 0x00000001 #define HW_CLKCTRL_RESET (0x00000120) -#define BP_CLKCTRL_RESET_RSRVD 2 -#define BM_CLKCTRL_RESET_RSRVD 0xFFFFFFFC -#define BF_CLKCTRL_RESET_RSRVD(v) \ - (((v) << 2) & BM_CLKCTRL_RESET_RSRVD) #define BM_CLKCTRL_RESET_CHIP 0x00000002 #define BM_CLKCTRL_RESET_DIG 0x00000001 @@ -432,10 +312,6 @@ #define BM_CLKCTRL_STATUS_CPU_LIMIT 0xC0000000 #define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \ (((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT) -#define BP_CLKCTRL_STATUS_RSRVD 0 -#define BM_CLKCTRL_STATUS_RSRVD 0x3FFFFFFF -#define BF_CLKCTRL_STATUS_RSRVD(v) \ - (((v) << 0) & BM_CLKCTRL_STATUS_RSRVD) #define HW_CLKCTRL_VERSION (0x00000140) diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx28.h b/arch/arm/mach-mxs/regs-clkctrl-mx28.h index 661df18755f..7d1b061d794 100644 --- a/arch/arm/mach-mxs/regs-clkctrl-mx28.h +++ b/arch/arm/mach-mxs/regs-clkctrl-mx28.h @@ -31,10 +31,6 @@ #define HW_CLKCTRL_PLL0CTRL0_CLR (0x00000008) #define HW_CLKCTRL_PLL0CTRL0_TOG (0x0000000c) -#define BP_CLKCTRL_PLL0CTRL0_RSRVD6 30 -#define BM_CLKCTRL_PLL0CTRL0_RSRVD6 0xC0000000 -#define BF_CLKCTRL_PLL0CTRL0_RSRVD6(v) \ - (((v) << 30) & BM_CLKCTRL_PLL0CTRL0_RSRVD6) #define BP_CLKCTRL_PLL0CTRL0_LFR_SEL 28 #define BM_CLKCTRL_PLL0CTRL0_LFR_SEL 0x30000000 #define BF_CLKCTRL_PLL0CTRL0_LFR_SEL(v) \ @@ -43,10 +39,6 @@ #define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_2 0x1 #define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_05 0x2 #define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLL0CTRL0_RSRVD5 26 -#define BM_CLKCTRL_PLL0CTRL0_RSRVD5 0x0C000000 -#define BF_CLKCTRL_PLL0CTRL0_RSRVD5(v) \ - (((v) << 26) & BM_CLKCTRL_PLL0CTRL0_RSRVD5) #define BP_CLKCTRL_PLL0CTRL0_CP_SEL 24 #define BM_CLKCTRL_PLL0CTRL0_CP_SEL 0x03000000 #define BF_CLKCTRL_PLL0CTRL0_CP_SEL(v) \ @@ -55,10 +47,6 @@ #define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_2 0x1 #define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_05 0x2 #define BV_CLKCTRL_PLL0CTRL0_CP_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLL0CTRL0_RSRVD4 22 -#define BM_CLKCTRL_PLL0CTRL0_RSRVD4 0x00C00000 -#define BF_CLKCTRL_PLL0CTRL0_RSRVD4(v) \ - (((v) << 22) & BM_CLKCTRL_PLL0CTRL0_RSRVD4) #define BP_CLKCTRL_PLL0CTRL0_DIV_SEL 20 #define BM_CLKCTRL_PLL0CTRL0_DIV_SEL 0x00300000 #define BF_CLKCTRL_PLL0CTRL0_DIV_SEL(v) \ @@ -67,22 +55,13 @@ #define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWER 0x1 #define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWEST 0x2 #define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__UNDEFINED 0x3 -#define BM_CLKCTRL_PLL0CTRL0_RSRVD3 0x00080000 #define BM_CLKCTRL_PLL0CTRL0_EN_USB_CLKS 0x00040000 #define BM_CLKCTRL_PLL0CTRL0_POWER 0x00020000 -#define BP_CLKCTRL_PLL0CTRL0_RSRVD1 0 -#define BM_CLKCTRL_PLL0CTRL0_RSRVD1 0x0001FFFF -#define BF_CLKCTRL_PLL0CTRL0_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_PLL0CTRL0_RSRVD1) #define HW_CLKCTRL_PLL0CTRL1 (0x00000010) #define BM_CLKCTRL_PLL0CTRL1_LOCK 0x80000000 #define BM_CLKCTRL_PLL0CTRL1_FORCE_LOCK 0x40000000 -#define BP_CLKCTRL_PLL0CTRL1_RSRVD1 16 -#define BM_CLKCTRL_PLL0CTRL1_RSRVD1 0x3FFF0000 -#define BF_CLKCTRL_PLL0CTRL1_RSRVD1(v) \ - (((v) << 16) & BM_CLKCTRL_PLL0CTRL1_RSRVD1) #define BP_CLKCTRL_PLL0CTRL1_LOCK_COUNT 0 #define BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT 0x0000FFFF #define BF_CLKCTRL_PLL0CTRL1_LOCK_COUNT(v) \ @@ -94,7 +73,6 @@ #define HW_CLKCTRL_PLL1CTRL0_TOG (0x0000002c) #define BM_CLKCTRL_PLL1CTRL0_CLKGATEEMI 0x80000000 -#define BM_CLKCTRL_PLL1CTRL0_RSRVD6 0x40000000 #define BP_CLKCTRL_PLL1CTRL0_LFR_SEL 28 #define BM_CLKCTRL_PLL1CTRL0_LFR_SEL 0x30000000 #define BF_CLKCTRL_PLL1CTRL0_LFR_SEL(v) \ @@ -103,10 +81,6 @@ #define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_2 0x1 #define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_05 0x2 #define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLL1CTRL0_RSRVD5 26 -#define BM_CLKCTRL_PLL1CTRL0_RSRVD5 0x0C000000 -#define BF_CLKCTRL_PLL1CTRL0_RSRVD5(v) \ - (((v) << 26) & BM_CLKCTRL_PLL1CTRL0_RSRVD5) #define BP_CLKCTRL_PLL1CTRL0_CP_SEL 24 #define BM_CLKCTRL_PLL1CTRL0_CP_SEL 0x03000000 #define BF_CLKCTRL_PLL1CTRL0_CP_SEL(v) \ @@ -115,10 +89,6 @@ #define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_2 0x1 #define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_05 0x2 #define BV_CLKCTRL_PLL1CTRL0_CP_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLL1CTRL0_RSRVD4 22 -#define BM_CLKCTRL_PLL1CTRL0_RSRVD4 0x00C00000 -#define BF_CLKCTRL_PLL1CTRL0_RSRVD4(v) \ - (((v) << 22) & BM_CLKCTRL_PLL1CTRL0_RSRVD4) #define BP_CLKCTRL_PLL1CTRL0_DIV_SEL 20 #define BM_CLKCTRL_PLL1CTRL0_DIV_SEL 0x00300000 #define BF_CLKCTRL_PLL1CTRL0_DIV_SEL(v) \ @@ -127,22 +97,13 @@ #define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWER 0x1 #define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWEST 0x2 #define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__UNDEFINED 0x3 -#define BM_CLKCTRL_PLL1CTRL0_RSRVD3 0x00080000 #define BM_CLKCTRL_PLL1CTRL0_EN_USB_CLKS 0x00040000 #define BM_CLKCTRL_PLL1CTRL0_POWER 0x00020000 -#define BP_CLKCTRL_PLL1CTRL0_RSRVD1 0 -#define BM_CLKCTRL_PLL1CTRL0_RSRVD1 0x0001FFFF -#define BF_CLKCTRL_PLL1CTRL0_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_PLL1CTRL0_RSRVD1) #define HW_CLKCTRL_PLL1CTRL1 (0x00000030) #define BM_CLKCTRL_PLL1CTRL1_LOCK 0x80000000 #define BM_CLKCTRL_PLL1CTRL1_FORCE_LOCK 0x40000000 -#define BP_CLKCTRL_PLL1CTRL1_RSRVD1 16 -#define BM_CLKCTRL_PLL1CTRL1_RSRVD1 0x3FFF0000 -#define BF_CLKCTRL_PLL1CTRL1_RSRVD1(v) \ - (((v) << 16) & BM_CLKCTRL_PLL1CTRL1_RSRVD1) #define BP_CLKCTRL_PLL1CTRL1_LOCK_COUNT 0 #define BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT 0x0000FFFF #define BF_CLKCTRL_PLL1CTRL1_LOCK_COUNT(v) \ @@ -154,51 +115,31 @@ #define HW_CLKCTRL_PLL2CTRL0_TOG (0x0000004c) #define BM_CLKCTRL_PLL2CTRL0_CLKGATE 0x80000000 -#define BM_CLKCTRL_PLL2CTRL0_RSRVD3 0x40000000 #define BP_CLKCTRL_PLL2CTRL0_LFR_SEL 28 #define BM_CLKCTRL_PLL2CTRL0_LFR_SEL 0x30000000 #define BF_CLKCTRL_PLL2CTRL0_LFR_SEL(v) \ (((v) << 28) & BM_CLKCTRL_PLL2CTRL0_LFR_SEL) -#define BM_CLKCTRL_PLL2CTRL0_RSRVD2 0x08000000 #define BM_CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B 0x04000000 #define BP_CLKCTRL_PLL2CTRL0_CP_SEL 24 #define BM_CLKCTRL_PLL2CTRL0_CP_SEL 0x03000000 #define BF_CLKCTRL_PLL2CTRL0_CP_SEL(v) \ (((v) << 24) & BM_CLKCTRL_PLL2CTRL0_CP_SEL) #define BM_CLKCTRL_PLL2CTRL0_POWER 0x00800000 -#define BP_CLKCTRL_PLL2CTRL0_RSRVD1 0 -#define BM_CLKCTRL_PLL2CTRL0_RSRVD1 0x007FFFFF -#define BF_CLKCTRL_PLL2CTRL0_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_PLL2CTRL0_RSRVD1) #define HW_CLKCTRL_CPU (0x00000050) #define HW_CLKCTRL_CPU_SET (0x00000054) #define HW_CLKCTRL_CPU_CLR (0x00000058) #define HW_CLKCTRL_CPU_TOG (0x0000005c) -#define BP_CLKCTRL_CPU_RSRVD5 30 -#define BM_CLKCTRL_CPU_RSRVD5 0xC0000000 -#define BF_CLKCTRL_CPU_RSRVD5(v) \ - (((v) << 30) & BM_CLKCTRL_CPU_RSRVD5) #define BM_CLKCTRL_CPU_BUSY_REF_XTAL 0x20000000 #define BM_CLKCTRL_CPU_BUSY_REF_CPU 0x10000000 -#define BM_CLKCTRL_CPU_RSRVD4 0x08000000 #define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN 0x04000000 #define BP_CLKCTRL_CPU_DIV_XTAL 16 #define BM_CLKCTRL_CPU_DIV_XTAL 0x03FF0000 #define BF_CLKCTRL_CPU_DIV_XTAL(v) \ (((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL) -#define BP_CLKCTRL_CPU_RSRVD3 13 -#define BM_CLKCTRL_CPU_RSRVD3 0x0000E000 -#define BF_CLKCTRL_CPU_RSRVD3(v) \ - (((v) << 13) & BM_CLKCTRL_CPU_RSRVD3) #define BM_CLKCTRL_CPU_INTERRUPT_WAIT 0x00001000 -#define BM_CLKCTRL_CPU_RSRVD2 0x00000800 #define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN 0x00000400 -#define BP_CLKCTRL_CPU_RSRVD1 6 -#define BM_CLKCTRL_CPU_RSRVD1 0x000003C0 -#define BF_CLKCTRL_CPU_RSRVD1(v) \ - (((v) << 6) & BM_CLKCTRL_CPU_RSRVD1) #define BP_CLKCTRL_CPU_DIV_CPU 0 #define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F #define BF_CLKCTRL_CPU_DIV_CPU(v) \ @@ -212,7 +153,6 @@ #define BM_CLKCTRL_HBUS_ASM_BUSY 0x80000000 #define BM_CLKCTRL_HBUS_DCP_AS_ENABLE 0x40000000 #define BM_CLKCTRL_HBUS_PXP_AS_ENABLE 0x20000000 -#define BM_CLKCTRL_HBUS_RSRVD2 0x10000000 #define BM_CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE 0x08000000 #define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE 0x04000000 #define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE 0x02000000 @@ -232,10 +172,6 @@ #define BV_CLKCTRL_HBUS_SLOW_DIV__BY8 0x3 #define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4 #define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5 -#define BP_CLKCTRL_HBUS_RSRVD1 6 -#define BM_CLKCTRL_HBUS_RSRVD1 0x0000FFC0 -#define BF_CLKCTRL_HBUS_RSRVD1(v) \ - (((v) << 6) & BM_CLKCTRL_HBUS_RSRVD1) #define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020 #define BP_CLKCTRL_HBUS_DIV 0 #define BM_CLKCTRL_HBUS_DIV 0x0000001F @@ -245,10 +181,6 @@ #define HW_CLKCTRL_XBUS (0x00000070) #define BM_CLKCTRL_XBUS_BUSY 0x80000000 -#define BP_CLKCTRL_XBUS_RSRVD1 12 -#define BM_CLKCTRL_XBUS_RSRVD1 0x7FFFF000 -#define BF_CLKCTRL_XBUS_RSRVD1(v) \ - (((v) << 12) & BM_CLKCTRL_XBUS_RSRVD1) #define BM_CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE 0x00000800 #define BM_CLKCTRL_XBUS_DIV_FRAC_EN 0x00000400 #define BP_CLKCTRL_XBUS_DIV 0 @@ -263,19 +195,10 @@ #define BP_CLKCTRL_XTAL_UART_CLK_GATE 31 #define BM_CLKCTRL_XTAL_UART_CLK_GATE 0x80000000 -#define BM_CLKCTRL_XTAL_RSRVD3 0x40000000 #define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE 29 #define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE 0x20000000 -#define BP_CLKCTRL_XTAL_RSRVD2 27 -#define BM_CLKCTRL_XTAL_RSRVD2 0x18000000 -#define BF_CLKCTRL_XTAL_RSRVD2(v) \ - (((v) << 27) & BM_CLKCTRL_XTAL_RSRVD2) #define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 26 #define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 0x04000000 -#define BP_CLKCTRL_XTAL_RSRVD1 2 -#define BM_CLKCTRL_XTAL_RSRVD1 0x03FFFFFC -#define BF_CLKCTRL_XTAL_RSRVD1(v) \ - (((v) << 2) & BM_CLKCTRL_XTAL_RSRVD1) #define BP_CLKCTRL_XTAL_DIV_UART 0 #define BM_CLKCTRL_XTAL_DIV_UART 0x00000003 #define BF_CLKCTRL_XTAL_DIV_UART(v) \ @@ -285,12 +208,7 @@ #define BP_CLKCTRL_SSP0_CLKGATE 31 #define BM_CLKCTRL_SSP0_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP0_RSRVD2 0x40000000 #define BM_CLKCTRL_SSP0_BUSY 0x20000000 -#define BP_CLKCTRL_SSP0_RSRVD1 10 -#define BM_CLKCTRL_SSP0_RSRVD1 0x1FFFFC00 -#define BF_CLKCTRL_SSP0_RSRVD1(v) \ - (((v) << 10) & BM_CLKCTRL_SSP0_RSRVD1) #define BM_CLKCTRL_SSP0_DIV_FRAC_EN 0x00000200 #define BP_CLKCTRL_SSP0_DIV 0 #define BM_CLKCTRL_SSP0_DIV 0x000001FF @@ -301,12 +219,7 @@ #define BP_CLKCTRL_SSP1_CLKGATE 31 #define BM_CLKCTRL_SSP1_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP1_RSRVD2 0x40000000 #define BM_CLKCTRL_SSP1_BUSY 0x20000000 -#define BP_CLKCTRL_SSP1_RSRVD1 10 -#define BM_CLKCTRL_SSP1_RSRVD1 0x1FFFFC00 -#define BF_CLKCTRL_SSP1_RSRVD1(v) \ - (((v) << 10) & BM_CLKCTRL_SSP1_RSRVD1) #define BM_CLKCTRL_SSP1_DIV_FRAC_EN 0x00000200 #define BP_CLKCTRL_SSP1_DIV 0 #define BM_CLKCTRL_SSP1_DIV 0x000001FF @@ -317,12 +230,7 @@ #define BP_CLKCTRL_SSP2_CLKGATE 31 #define BM_CLKCTRL_SSP2_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP2_RSRVD2 0x40000000 #define BM_CLKCTRL_SSP2_BUSY 0x20000000 -#define BP_CLKCTRL_SSP2_RSRVD1 10 -#define BM_CLKCTRL_SSP2_RSRVD1 0x1FFFFC00 -#define BF_CLKCTRL_SSP2_RSRVD1(v) \ - (((v) << 10) & BM_CLKCTRL_SSP2_RSRVD1) #define BM_CLKCTRL_SSP2_DIV_FRAC_EN 0x00000200 #define BP_CLKCTRL_SSP2_DIV 0 #define BM_CLKCTRL_SSP2_DIV 0x000001FF @@ -333,12 +241,7 @@ #define BP_CLKCTRL_SSP3_CLKGATE 31 #define BM_CLKCTRL_SSP3_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP3_RSRVD2 0x40000000 #define BM_CLKCTRL_SSP3_BUSY 0x20000000 -#define BP_CLKCTRL_SSP3_RSRVD1 10 -#define BM_CLKCTRL_SSP3_RSRVD1 0x1FFFFC00 -#define BF_CLKCTRL_SSP3_RSRVD1(v) \ - (((v) << 10) & BM_CLKCTRL_SSP3_RSRVD1) #define BM_CLKCTRL_SSP3_DIV_FRAC_EN 0x00000200 #define BP_CLKCTRL_SSP3_DIV 0 #define BM_CLKCTRL_SSP3_DIV 0x000001FF @@ -349,12 +252,7 @@ #define BP_CLKCTRL_GPMI_CLKGATE 31 #define BM_CLKCTRL_GPMI_CLKGATE 0x80000000 -#define BM_CLKCTRL_GPMI_RSRVD2 0x40000000 #define BM_CLKCTRL_GPMI_BUSY 0x20000000 -#define BP_CLKCTRL_GPMI_RSRVD1 11 -#define BM_CLKCTRL_GPMI_RSRVD1 0x1FFFF800 -#define BF_CLKCTRL_GPMI_RSRVD1(v) \ - (((v) << 11) & BM_CLKCTRL_GPMI_RSRVD1) #define BM_CLKCTRL_GPMI_DIV_FRAC_EN 0x00000400 #define BP_CLKCTRL_GPMI_DIV 0 #define BM_CLKCTRL_GPMI_DIV 0x000003FF @@ -365,10 +263,6 @@ #define BP_CLKCTRL_SPDIF_CLKGATE 31 #define BM_CLKCTRL_SPDIF_CLKGATE 0x80000000 -#define BP_CLKCTRL_SPDIF_RSRVD 0 -#define BM_CLKCTRL_SPDIF_RSRVD 0x7FFFFFFF -#define BF_CLKCTRL_SPDIF_RSRVD(v) \ - (((v) << 0) & BM_CLKCTRL_SPDIF_RSRVD) #define HW_CLKCTRL_EMI (0x000000f0) @@ -379,24 +273,12 @@ #define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000 #define BM_CLKCTRL_EMI_BUSY_REF_CPU 0x08000000 #define BM_CLKCTRL_EMI_BUSY_SYNC_MODE 0x04000000 -#define BP_CLKCTRL_EMI_RSRVD3 18 -#define BM_CLKCTRL_EMI_RSRVD3 0x03FC0000 -#define BF_CLKCTRL_EMI_RSRVD3(v) \ - (((v) << 18) & BM_CLKCTRL_EMI_RSRVD3) #define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000 #define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000 -#define BP_CLKCTRL_EMI_RSRVD2 12 -#define BM_CLKCTRL_EMI_RSRVD2 0x0000F000 -#define BF_CLKCTRL_EMI_RSRVD2(v) \ - (((v) << 12) & BM_CLKCTRL_EMI_RSRVD2) #define BP_CLKCTRL_EMI_DIV_XTAL 8 #define BM_CLKCTRL_EMI_DIV_XTAL 0x00000F00 #define BF_CLKCTRL_EMI_DIV_XTAL(v) \ (((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL) -#define BP_CLKCTRL_EMI_RSRVD1 6 -#define BM_CLKCTRL_EMI_RSRVD1 0x000000C0 -#define BF_CLKCTRL_EMI_RSRVD1(v) \ - (((v) << 6) & BM_CLKCTRL_EMI_RSRVD1) #define BP_CLKCTRL_EMI_DIV_EMI 0 #define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F #define BF_CLKCTRL_EMI_DIV_EMI(v) \ @@ -406,12 +288,7 @@ #define BP_CLKCTRL_SAIF0_CLKGATE 31 #define BM_CLKCTRL_SAIF0_CLKGATE 0x80000000 -#define BM_CLKCTRL_SAIF0_RSRVD2 0x40000000 #define BM_CLKCTRL_SAIF0_BUSY 0x20000000 -#define BP_CLKCTRL_SAIF0_RSRVD1 17 -#define BM_CLKCTRL_SAIF0_RSRVD1 0x1FFE0000 -#define BF_CLKCTRL_SAIF0_RSRVD1(v) \ - (((v) << 17) & BM_CLKCTRL_SAIF0_RSRVD1) #define BM_CLKCTRL_SAIF0_DIV_FRAC_EN 0x00010000 #define BP_CLKCTRL_SAIF0_DIV 0 #define BM_CLKCTRL_SAIF0_DIV 0x0000FFFF @@ -422,12 +299,7 @@ #define BP_CLKCTRL_SAIF1_CLKGATE 31 #define BM_CLKCTRL_SAIF1_CLKGATE 0x80000000 -#define BM_CLKCTRL_SAIF1_RSRVD2 0x40000000 #define BM_CLKCTRL_SAIF1_BUSY 0x20000000 -#define BP_CLKCTRL_SAIF1_RSRVD1 17 -#define BM_CLKCTRL_SAIF1_RSRVD1 0x1FFE0000 -#define BF_CLKCTRL_SAIF1_RSRVD1(v) \ - (((v) << 17) & BM_CLKCTRL_SAIF1_RSRVD1) #define BM_CLKCTRL_SAIF1_DIV_FRAC_EN 0x00010000 #define BP_CLKCTRL_SAIF1_DIV 0 #define BM_CLKCTRL_SAIF1_DIV 0x0000FFFF @@ -438,12 +310,7 @@ #define BP_CLKCTRL_DIS_LCDIF_CLKGATE 31 #define BM_CLKCTRL_DIS_LCDIF_CLKGATE 0x80000000 -#define BM_CLKCTRL_DIS_LCDIF_RSRVD2 0x40000000 #define BM_CLKCTRL_DIS_LCDIF_BUSY 0x20000000 -#define BP_CLKCTRL_DIS_LCDIF_RSRVD1 14 -#define BM_CLKCTRL_DIS_LCDIF_RSRVD1 0x1FFFC000 -#define BF_CLKCTRL_DIS_LCDIF_RSRVD1(v) \ - (((v) << 14) & BM_CLKCTRL_DIS_LCDIF_RSRVD1) #define BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN 0x00002000 #define BP_CLKCTRL_DIS_LCDIF_DIV 0 #define BM_CLKCTRL_DIS_LCDIF_DIV 0x00001FFF @@ -453,12 +320,7 @@ #define HW_CLKCTRL_ETM (0x00000130) #define BM_CLKCTRL_ETM_CLKGATE 0x80000000 -#define BM_CLKCTRL_ETM_RSRVD2 0x40000000 #define BM_CLKCTRL_ETM_BUSY 0x20000000 -#define BP_CLKCTRL_ETM_RSRVD1 8 -#define BM_CLKCTRL_ETM_RSRVD1 0x1FFFFF00 -#define BF_CLKCTRL_ETM_RSRVD1(v) \ - (((v) << 8) & BM_CLKCTRL_ETM_RSRVD1) #define BM_CLKCTRL_ETM_DIV_FRAC_EN 0x00000080 #define BP_CLKCTRL_ETM_DIV 0 #define BM_CLKCTRL_ETM_DIV 0x0000007F @@ -471,7 +333,6 @@ #define BP_CLKCTRL_ENET_DISABLE 30 #define BM_CLKCTRL_ENET_DISABLE 0x40000000 #define BM_CLKCTRL_ENET_STATUS 0x20000000 -#define BM_CLKCTRL_ENET_RSRVD1 0x10000000 #define BM_CLKCTRL_ENET_BUSY_TIME 0x08000000 #define BP_CLKCTRL_ENET_DIV_TIME 21 #define BM_CLKCTRL_ENET_DIV_TIME 0x07E00000 @@ -493,37 +354,23 @@ #define BM_CLKCTRL_ENET_CLK_OUT_EN 0x00040000 #define BM_CLKCTRL_ENET_RESET_BY_SW_CHIP 0x00020000 #define BM_CLKCTRL_ENET_RESET_BY_SW 0x00010000 -#define BP_CLKCTRL_ENET_RSRVD0 0 -#define BM_CLKCTRL_ENET_RSRVD0 0x0000FFFF -#define BF_CLKCTRL_ENET_RSRVD0(v) \ - (((v) << 0) & BM_CLKCTRL_ENET_RSRVD0) #define HW_CLKCTRL_HSADC (0x00000150) -#define BM_CLKCTRL_HSADC_RSRVD2 0x80000000 #define BM_CLKCTRL_HSADC_RESETB 0x40000000 #define BP_CLKCTRL_HSADC_FREQDIV 28 #define BM_CLKCTRL_HSADC_FREQDIV 0x30000000 #define BF_CLKCTRL_HSADC_FREQDIV(v) \ (((v) << 28) & BM_CLKCTRL_HSADC_FREQDIV) -#define BP_CLKCTRL_HSADC_RSRVD1 0 -#define BM_CLKCTRL_HSADC_RSRVD1 0x0FFFFFFF -#define BF_CLKCTRL_HSADC_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_HSADC_RSRVD1) #define HW_CLKCTRL_FLEXCAN (0x00000160) -#define BM_CLKCTRL_FLEXCAN_RSRVD2 0x80000000 #define BP_CLKCTRL_FLEXCAN_STOP_CAN0 30 #define BM_CLKCTRL_FLEXCAN_STOP_CAN0 0x40000000 #define BM_CLKCTRL_FLEXCAN_CAN0_STATUS 0x20000000 #define BP_CLKCTRL_FLEXCAN_STOP_CAN1 28 #define BM_CLKCTRL_FLEXCAN_STOP_CAN1 0x10000000 #define BM_CLKCTRL_FLEXCAN_CAN1_STATUS 0x08000000 -#define BP_CLKCTRL_FLEXCAN_RSRVD1 0 -#define BM_CLKCTRL_FLEXCAN_RSRVD1 0x07FFFFFF -#define BF_CLKCTRL_FLEXCAN_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_FLEXCAN_RSRVD1) #define HW_CLKCTRL_FRAC0 (0x000001b0) #define HW_CLKCTRL_FRAC0_SET (0x000001b4) @@ -564,10 +411,6 @@ #define HW_CLKCTRL_FRAC1_CLR (0x000001c8) #define HW_CLKCTRL_FRAC1_TOG (0x000001cc) -#define BP_CLKCTRL_FRAC1_RSRVD2 24 -#define BM_CLKCTRL_FRAC1_RSRVD2 0xFF000000 -#define BF_CLKCTRL_FRAC1_RSRVD2(v) \ - (((v) << 24) & BM_CLKCTRL_FRAC1_RSRVD2) #define BP_CLKCTRL_FRAC1_CLKGATEGPMI 23 #define BM_CLKCTRL_FRAC1_CLKGATEGPMI 0x00800000 #define BM_CLKCTRL_FRAC1_GPMI_STABLE 0x00400000 @@ -595,22 +438,10 @@ #define HW_CLKCTRL_CLKSEQ_CLR (0x000001d8) #define HW_CLKCTRL_CLKSEQ_TOG (0x000001dc) -#define BP_CLKCTRL_CLKSEQ_RSRVD0 19 -#define BM_CLKCTRL_CLKSEQ_RSRVD0 0xFFF80000 -#define BF_CLKCTRL_CLKSEQ_RSRVD0(v) \ - (((v) << 19) & BM_CLKCTRL_CLKSEQ_RSRVD0) #define BM_CLKCTRL_CLKSEQ_BYPASS_CPU 0x00040000 -#define BP_CLKCTRL_CLKSEQ_RSRVD1 15 -#define BM_CLKCTRL_CLKSEQ_RSRVD1 0x00038000 -#define BF_CLKCTRL_CLKSEQ_RSRVD1(v) \ - (((v) << 15) & BM_CLKCTRL_CLKSEQ_RSRVD1) #define BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF 0x00004000 #define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__BYPASS 0x1 #define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__PFD 0x0 -#define BP_CLKCTRL_CLKSEQ_RSRVD2 9 -#define BM_CLKCTRL_CLKSEQ_RSRVD2 0x00003E00 -#define BF_CLKCTRL_CLKSEQ_RSRVD2(v) \ - (((v) << 9) & BM_CLKCTRL_CLKSEQ_RSRVD2) #define BM_CLKCTRL_CLKSEQ_BYPASS_ETM 0x00000100 #define BM_CLKCTRL_CLKSEQ_BYPASS_EMI 0x00000080 #define BM_CLKCTRL_CLKSEQ_BYPASS_SSP3 0x00000040 @@ -623,10 +454,6 @@ #define HW_CLKCTRL_RESET (0x000001e0) -#define BP_CLKCTRL_RESET_RSRVD 6 -#define BM_CLKCTRL_RESET_RSRVD 0xFFFFFFC0 -#define BF_CLKCTRL_RESET_RSRVD(v) \ - (((v) << 6) & BM_CLKCTRL_RESET_RSRVD) #define BM_CLKCTRL_RESET_WDOG_POR_DISABLE 0x00000020 #define BM_CLKCTRL_RESET_EXTERNAL_RESET_ENABLE 0x00000010 #define BM_CLKCTRL_RESET_THERMAL_RESET_ENABLE 0x00000008 @@ -640,10 +467,6 @@ #define BM_CLKCTRL_STATUS_CPU_LIMIT 0xC0000000 #define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \ (((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT) -#define BP_CLKCTRL_STATUS_RSRVD 0 -#define BM_CLKCTRL_STATUS_RSRVD 0x3FFFFFFF -#define BF_CLKCTRL_STATUS_RSRVD(v) \ - (((v) << 0) & BM_CLKCTRL_STATUS_RSRVD) #define HW_CLKCTRL_VERSION (0x00000200) diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c index 9343d7edd4f..20ec3bddf7c 100644 --- a/arch/arm/mach-mxs/system.c +++ b/arch/arm/mach-mxs/system.c @@ -22,6 +22,7 @@ #include <linux/err.h> #include <linux/delay.h> #include <linux/init.h> +#include <linux/module.h> #include <asm/proc-fns.h> #include <asm/system.h> @@ -135,3 +136,4 @@ error: pr_err("%s(%p): module reset timeout\n", __func__, reset_addr); return -ETIMEDOUT; } +EXPORT_SYMBOL(mxs_reset_block); |