diff options
Diffstat (limited to 'arch/arm/mach-mxs')
24 files changed, 471 insertions, 196 deletions
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index cf00b3e3be8..c57f9964a71 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -83,6 +83,18 @@ config MODULE_M28 select MXS_HAVE_PLATFORM_MXSFB select MXS_OCOTP +config MODULE_APX4 + bool + select SOC_IMX28 + select LEDS_GPIO_REGISTER + select MXS_HAVE_AMBA_DUART + select MXS_HAVE_PLATFORM_AUART + select MXS_HAVE_PLATFORM_FEC + select MXS_HAVE_PLATFORM_MXS_I2C + select MXS_HAVE_PLATFORM_MXS_MMC + select MXS_HAVE_PLATFORM_MXS_SAIF + select MXS_OCOTP + config MACH_TX28 bool "Ka-Ro TX28 module" select MODULE_TX28 @@ -91,4 +103,8 @@ config MACH_M28EVK bool "Support DENX M28EVK Platform" select MODULE_M28 +config MACH_APX4DEVKIT + bool "Support Bluegiga APX4 Development Kit" + select MODULE_APX4 + endif diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 8c93b24896b..908bf9a567f 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o obj-$(CONFIG_MACH_M28EVK) += mach-m28evk.o +obj-$(CONFIG_MACH_APX4DEVKIT) += mach-apx4devkit.o obj-$(CONFIG_MODULE_TX28) += module-tx28.o obj-$(CONFIG_MACH_TX28) += mach-tx28.o diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index e12e11231dc..e3ac52c3401 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -223,7 +223,6 @@ static int cpu_clk_set_rate(struct clk *clk, unsigned long rate) { u32 reg, bm_busy, div_max, d, f, div, frac; unsigned long diff, parent_rate, calc_rate; - int i; parent_rate = clk_get_rate(clk->parent); @@ -275,14 +274,7 @@ static int cpu_clk_set_rate(struct clk *clk, unsigned long rate) reg |= div << BP_CLKCTRL_CPU_DIV_CPU; __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU); - for (i = 10000; i; i--) - if (!(__raw_readl(CLKCTRL_BASE_ADDR + - HW_CLKCTRL_CPU) & bm_busy)) - break; - if (!i) { - pr_err("%s: divider writing timeout\n", __func__); - return -ETIMEDOUT; - } + mxs_clkctrl_timeout(HW_CLKCTRL_CPU, bm_busy); return 0; } @@ -292,7 +284,6 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ { \ u32 reg, div_max, div; \ unsigned long parent_rate; \ - int i; \ \ parent_rate = clk_get_rate(clk->parent); \ div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \ @@ -310,15 +301,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ } \ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ \ - for (i = 10000; i; i--) \ - if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ - HW_CLKCTRL_##dr) & BM_CLKCTRL_##dr##_BUSY)) \ - break; \ - if (!i) { \ - pr_err("%s: divider writing timeout\n", __func__); \ - return -ETIMEDOUT; \ - } \ - \ + mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY); \ return 0; \ } @@ -456,12 +439,13 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk) _REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk) _REGISTER_CLOCK("imx23-fb", NULL, lcdif_clk) + _REGISTER_CLOCK("imx23-gpmi-nand", NULL, gpmi_clk) }; static int clk_misc_init(void) { u32 reg; - int i; + int ret; /* Fix up parent per register setting */ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ); @@ -510,14 +494,7 @@ static int clk_misc_init(void) reg |= 3 << BP_CLKCTRL_HBUS_DIV; __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS); - for (i = 10000; i; i--) - if (!(__raw_readl(CLKCTRL_BASE_ADDR + - HW_CLKCTRL_HBUS) & BM_CLKCTRL_HBUS_BUSY)) - break; - if (!i) { - pr_err("%s: divider writing timeout\n", __func__); - return -ETIMEDOUT; - } + ret = mxs_clkctrl_timeout(HW_CLKCTRL_HBUS, BM_CLKCTRL_HBUS_BUSY); /* Gate off cpu clock in WFI for power saving */ __raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT, @@ -532,7 +509,7 @@ static int clk_misc_init(void) reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC; __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC); - return 0; + return ret; } int __init mx23_clocks_init(void) diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 5d68e415222..cea29c99e21 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -322,7 +322,6 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ { \ u32 reg, bm_busy, div_max, d, f, div, frac; \ unsigned long diff, parent_rate, calc_rate; \ - int i; \ \ div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \ bm_busy = BM_CLKCTRL_##dr##_BUSY; \ @@ -396,16 +395,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ } \ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ \ - for (i = 10000; i; i--) \ - if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ - HW_CLKCTRL_##dr) & bm_busy)) \ - break; \ - if (!i) { \ - pr_err("%s: divider writing timeout\n", __func__); \ - return -ETIMEDOUT; \ - } \ - \ - return 0; \ + return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, bm_busy); \ } _CLK_SET_RATE(cpu_clk, CPU, FRAC0, CPU) @@ -421,7 +411,6 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ { \ u32 reg, div_max, div; \ unsigned long parent_rate; \ - int i; \ \ parent_rate = clk_get_rate(clk->parent); \ div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \ @@ -439,16 +428,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ } \ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ \ - for (i = 10000; i; i--) \ - if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ - HW_CLKCTRL_##dr) & BM_CLKCTRL_##dr##_BUSY)) \ - break; \ - if (!i) { \ - pr_err("%s: divider writing timeout\n", __func__); \ - return -ETIMEDOUT; \ - } \ - \ - return 0; \ + return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY);\ } _CLK_SET_RATE1(xbus_clk, XBUS) @@ -461,7 +441,6 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ u32 reg; \ u64 lrate; \ unsigned long parent_rate; \ - int i; \ \ parent_rate = clk_get_rate(clk->parent); \ if (rate > parent_rate) \ @@ -477,18 +456,13 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ reg &= ~BM_CLKCTRL_##rs##_DIV; \ reg |= div << BP_CLKCTRL_##rs##_DIV; \ - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ - \ - for (i = 10000; i; i--) \ - if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ - HW_CLKCTRL_##rs) & BM_CLKCTRL_##rs##_BUSY)) \ - break; \ - if (!i) { \ - pr_err("%s: divider writing timeout\n", __func__); \ - return -ETIMEDOUT; \ + if (reg & (1 << clk->enable_shift)) { \ + pr_err("%s: clock is gated\n", __func__); \ + return -EINVAL; \ } \ + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ \ - return 0; \ + return mxs_clkctrl_timeout(HW_CLKCTRL_##rs, BM_CLKCTRL_##rs##_BUSY);\ } _CLK_SET_RATE_SAIF(saif0_clk, SAIF0) @@ -643,6 +617,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("duart", NULL, uart_clk) _REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk) _REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk) + _REGISTER_CLOCK("imx28-gpmi-nand", NULL, gpmi_clk) _REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk) _REGISTER_CLOCK("mxs-auart.1", NULL, uart_clk) _REGISTER_CLOCK("mxs-auart.2", NULL, uart_clk) @@ -654,6 +629,8 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk) _REGISTER_CLOCK("mxs-mmc.0", NULL, ssp0_clk) _REGISTER_CLOCK("mxs-mmc.1", NULL, ssp1_clk) + _REGISTER_CLOCK("mxs-mmc.2", NULL, ssp2_clk) + _REGISTER_CLOCK("mxs-mmc.3", NULL, ssp3_clk) _REGISTER_CLOCK("flexcan.0", NULL, can0_clk) _REGISTER_CLOCK("flexcan.1", NULL, can1_clk) _REGISTER_CLOCK(NULL, "usb0", usb0_clk) @@ -676,7 +653,7 @@ static struct clk_lookup lookups[] = { static int clk_misc_init(void) { u32 reg; - int i; + int ret; /* Fix up parent per register setting */ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ); @@ -756,14 +733,7 @@ static int clk_misc_init(void) reg |= 3 << BP_CLKCTRL_HBUS_DIV; __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS); - for (i = 10000; i; i--) - if (!(__raw_readl(CLKCTRL_BASE_ADDR + - HW_CLKCTRL_HBUS) & BM_CLKCTRL_HBUS_ASM_BUSY)) - break; - if (!i) { - pr_err("%s: divider writing timeout\n", __func__); - return -ETIMEDOUT; - } + ret = mxs_clkctrl_timeout(HW_CLKCTRL_HBUS, BM_CLKCTRL_HBUS_ASM_BUSY); /* Gate off cpu clock in WFI for power saving */ __raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT, @@ -790,7 +760,7 @@ static int clk_misc_init(void) reg |= 30 << BP_CLKCTRL_FRAC0_IO0FRAC; __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0); - return 0; + return ret; } int __init mx28_clocks_init(void) @@ -803,6 +773,8 @@ int __init mx28_clocks_init(void) */ clk_set_parent(&ssp0_clk, &ref_io0_clk); clk_set_parent(&ssp1_clk, &ref_io0_clk); + clk_set_parent(&ssp2_clk, &ref_io1_clk); + clk_set_parent(&ssp3_clk, &ref_io1_clk); clk_prepare_enable(&cpu_clk); clk_prepare_enable(&hbus_clk); diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h index 3fa651d2c99..4d1329d5928 100644 --- a/arch/arm/mach-mxs/devices-mx23.h +++ b/arch/arm/mach-mxs/devices-mx23.h @@ -21,6 +21,10 @@ extern const struct mxs_auart_data mx23_auart_data[] __initconst; #define mx23_add_auart0() mx23_add_auart(0) #define mx23_add_auart1() mx23_add_auart(1) +extern const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst; +#define mx23_add_gpmi_nand(pdata) \ + mxs_add_gpmi_nand(pdata, &mx23_gpmi_nand_data) + extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst; #define mx23_add_mxs_mmc(id, pdata) \ mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata) diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index 4f50094e293..9dbeae13084 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -34,6 +34,10 @@ extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst; #define mx28_add_flexcan0(pdata) mx28_add_flexcan(0, pdata) #define mx28_add_flexcan1(pdata) mx28_add_flexcan(1, pdata) +extern const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst; +#define mx28_add_gpmi_nand(pdata) \ + mxs_add_gpmi_nand(pdata, &mx28_gpmi_nand_data) + extern const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst; #define mx28_add_mxs_i2c(id) mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id]) diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c index fe3e847930c..01faffec306 100644 --- a/arch/arm/mach-mxs/devices.c +++ b/arch/arm/mach-mxs/devices.c @@ -77,16 +77,18 @@ err: int __init mxs_add_amba_device(const struct amba_device *dev) { - struct amba_device *adev = kmalloc(sizeof(*adev), GFP_KERNEL); + struct amba_device *adev = amba_device_alloc(dev->dev.init_name, + dev->res.start, resource_size(&dev->res)); if (!adev) { pr_err("%s: failed to allocate memory", __func__); return -ENOMEM; } - *adev = *dev; + adev->irq[0] = dev->irq[0]; + adev->irq[1] = dev->irq[1]; - return amba_device_register(adev, &iomem_resource); + return amba_device_add(adev, &iomem_resource); } struct device mxs_apbh_bus = { diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig index 18b6bf526a2..b8913df4cfa 100644 --- a/arch/arm/mach-mxs/devices/Kconfig +++ b/arch/arm/mach-mxs/devices/Kconfig @@ -12,6 +12,9 @@ config MXS_HAVE_PLATFORM_FLEXCAN select HAVE_CAN_FLEXCAN if CAN bool +config MXS_HAVE_PLATFORM_GPMI_NAND + bool + config MXS_HAVE_PLATFORM_MXS_I2C bool diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index f52e3e53bae..c8f5c9541a3 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o obj-y += platform-dma.o obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_GPMI_NAND) += platform-gpmi-nand.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o diff --git a/arch/arm/mach-mxs/devices/amba-duart.c b/arch/arm/mach-mxs/devices/amba-duart.c index a559db09b49..a5479f76604 100644 --- a/arch/arm/mach-mxs/devices/amba-duart.c +++ b/arch/arm/mach-mxs/devices/amba-duart.c @@ -23,7 +23,7 @@ const struct amba_device name##_device __initconst = { \ .end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1, \ .flags = IORESOURCE_MEM, \ }, \ - .irq = {soc ## _INT_DUART, NO_IRQ}, \ + .irq = {soc ## _INT_DUART}, \ } #ifdef CONFIG_SOC_IMX23 diff --git a/arch/arm/mach-mxs/devices/platform-gpmi-nand.c b/arch/arm/mach-mxs/devices/platform-gpmi-nand.c new file mode 100644 index 00000000000..3e22df5944a --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-gpmi-nand.c @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#include <asm/sizes.h> +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> +#include <linux/dma-mapping.h> + +#ifdef CONFIG_SOC_IMX23 +const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst = { + .devid = "imx23-gpmi-nand", + .res = { + /* GPMI */ + DEFINE_RES_MEM_NAMED(MX23_GPMI_BASE_ADDR, SZ_8K, + GPMI_NAND_GPMI_REGS_ADDR_RES_NAME), + DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_ATTENTION, + GPMI_NAND_GPMI_INTERRUPT_RES_NAME), + /* BCH */ + DEFINE_RES_MEM_NAMED(MX23_BCH_BASE_ADDR, SZ_8K, + GPMI_NAND_BCH_REGS_ADDR_RES_NAME), + DEFINE_RES_IRQ_NAMED(MX23_INT_BCH, + GPMI_NAND_BCH_INTERRUPT_RES_NAME), + /* DMA */ + DEFINE_RES_NAMED(MX23_DMA_GPMI0, + MX23_DMA_GPMI3 - MX23_DMA_GPMI0 + 1, + GPMI_NAND_DMA_CHANNELS_RES_NAME, + IORESOURCE_DMA), + DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_DMA, + GPMI_NAND_DMA_INTERRUPT_RES_NAME), + }, +}; +#endif + +#ifdef CONFIG_SOC_IMX28 +const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst = { + .devid = "imx28-gpmi-nand", + .res = { + /* GPMI */ + DEFINE_RES_MEM_NAMED(MX28_GPMI_BASE_ADDR, SZ_8K, + GPMI_NAND_GPMI_REGS_ADDR_RES_NAME), + DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI, + GPMI_NAND_GPMI_INTERRUPT_RES_NAME), + /* BCH */ + DEFINE_RES_MEM_NAMED(MX28_BCH_BASE_ADDR, SZ_8K, + GPMI_NAND_BCH_REGS_ADDR_RES_NAME), + DEFINE_RES_IRQ_NAMED(MX28_INT_BCH, + GPMI_NAND_BCH_INTERRUPT_RES_NAME), + /* DMA */ + DEFINE_RES_NAMED(MX28_DMA_GPMI0, + MX28_DMA_GPMI7 - MX28_DMA_GPMI0 + 1, + GPMI_NAND_DMA_CHANNELS_RES_NAME, + IORESOURCE_DMA), + DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI_DMA, + GPMI_NAND_DMA_INTERRUPT_RES_NAME), + }, +}; +#endif + +struct platform_device *__init +mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata, + const struct mxs_gpmi_nand_data *data) +{ + return mxs_add_platform_device_dmamask(data->devid, -1, + data->res, GPMI_NAND_RES_SIZE, + pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} diff --git a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c index 382dacbeca2..bef9d923f54 100644 --- a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c +++ b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c @@ -41,6 +41,8 @@ const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = { const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = { mxs_mxs_mmc_data_entry(MX28, 0, 0), mxs_mxs_mmc_data_entry(MX28, 1, 1), + mxs_mxs_mmc_data_entry(MX28, 2, 2), + mxs_mxs_mmc_data_entry(MX28, 3, 3), }; #endif diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h index e1237ab2586..c50c3ea28a9 100644 --- a/arch/arm/mach-mxs/include/mach/common.h +++ b/arch/arm/mach-mxs/include/mach/common.h @@ -31,4 +31,6 @@ extern void mx28_init_irq(void); extern void icoll_init_irq(void); +extern int mxs_clkctrl_timeout(unsigned int reg_offset, unsigned int mask); + #endif /* __MACH_MXS_COMMON_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index dc369c1239f..f2e383955d8 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -66,6 +66,16 @@ struct platform_device *__init mxs_add_flexcan( const struct mxs_flexcan_data *data, const struct flexcan_platform_data *pdata); +/* gpmi-nand */ +#include <linux/mtd/gpmi-nand.h> +struct mxs_gpmi_nand_data { + const char *devid; + const struct resource res[GPMI_NAND_RES_SIZE]; +}; +struct platform_device *__init +mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata, + const struct mxs_gpmi_nand_data *data); + /* i2c */ struct mxs_mxs_i2c_data { int id; diff --git a/arch/arm/mach-mxs/include/mach/digctl.h b/arch/arm/mach-mxs/include/mach/digctl.h index 49a888c65d6..17964066303 100644 --- a/arch/arm/mach-mxs/include/mach/digctl.h +++ b/arch/arm/mach-mxs/include/mach/digctl.h @@ -18,4 +18,5 @@ #define HW_DIGCTL_CTRL 0x0 #define BP_DIGCTL_CTRL_SAIF_CLKMUX 10 #define BM_DIGCTL_CTRL_SAIF_CLKMUX (0x3 << 10) +#define HW_DIGCTL_CHIPID 0x310 #endif diff --git a/arch/arm/mach-mxs/include/mach/entry-macro.S b/arch/arm/mach-mxs/include/mach/entry-macro.S index 9f0da12e657..0c14259705b 100644 --- a/arch/arm/mach-mxs/include/mach/entry-macro.S +++ b/arch/arm/mach-mxs/include/mach/entry-macro.S @@ -23,9 +23,6 @@ #define MXS_ICOLL_VBASE MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR) #define HW_ICOLL_STAT_OFFSET 0x70 - .macro disable_fiq - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \irqnr, [\base, #HW_ICOLL_STAT_OFFSET] cmp \irqnr, #0x7F @@ -36,6 +33,3 @@ .macro get_irqnr_preamble, base, tmp ldr \base, =MXS_ICOLL_VBASE .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h index bde5f663474..7d4fb6d0afd 100644 --- a/arch/arm/mach-mxs/include/mach/mxs.h +++ b/arch/arm/mach-mxs/include/mach/mxs.h @@ -23,22 +23,10 @@ #include <linux/io.h> #endif #include <asm/mach-types.h> +#include <mach/digctl.h> #include <mach/hardware.h> /* - * MXS CPU types - */ -#define cpu_is_mx23() ( \ - machine_is_mx23evk() || \ - machine_is_stmp378x() || \ - 0) -#define cpu_is_mx28() ( \ - machine_is_mx28evk() || \ - machine_is_m28evk() || \ - machine_is_tx28() || \ - 0) - -/* * IO addresses common to MXS-based */ #define MXS_IO_BASE_ADDR 0x80000000 @@ -109,6 +97,21 @@ static inline void __mxs_togl(u32 mask, void __iomem *reg) { __raw_writel(mask, reg + MXS_TOG_ADDR); } + +/* + * MXS CPU types + */ +#define MXS_CHIPID (MXS_IO_ADDRESS(MXS_DIGCTL_BASE_ADDR) + HW_DIGCTL_CHIPID) + +static inline int cpu_is_mx23(void) +{ + return ((__raw_readl(MXS_CHIPID) >> 16) == 0x3780); +} + +static inline int cpu_is_mx28(void) +{ + return ((__raw_readl(MXS_CHIPID) >> 16) == 0x2800); +} #endif #endif /* __MACH_MXS_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/system.h b/arch/arm/mach-mxs/include/mach/system.h deleted file mode 100644 index e7ad1bb2942..00000000000 --- a/arch/arm/mach-mxs/include/mach/system.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_MXS_SYSTEM_H__ -#define __MACH_MXS_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif /* __MACH_MXS_SYSTEM_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h index 67776746f14..ef281149544 100644 --- a/arch/arm/mach-mxs/include/mach/uncompress.h +++ b/arch/arm/mach-mxs/include/mach/uncompress.h @@ -18,8 +18,6 @@ #ifndef __MACH_MXS_UNCOMPRESS_H__ #define __MACH_MXS_UNCOMPRESS_H__ -#include <asm/mach-types.h> - unsigned long mxs_duart_base; #define MXS_DUART(x) (*(volatile unsigned long *)(mxs_duart_base + (x))) @@ -55,16 +53,17 @@ static inline void flush(void) #define MX23_DUART_BASE_ADDR 0x80070000 #define MX28_DUART_BASE_ADDR 0x80074000 +#define MXS_DIGCTL_CHIPID 0x8001c310 static inline void __arch_decomp_setup(unsigned long arch_id) { - switch (arch_id) { - case MACH_TYPE_MX23EVK: + u16 chipid = (*(volatile unsigned long *) MXS_DIGCTL_CHIPID) >> 16; + + switch (chipid) { + case 0x3780: mxs_duart_base = MX23_DUART_BASE_ADDR; break; - case MACH_TYPE_MX28EVK: - case MACH_TYPE_M28EVK: - case MACH_TYPE_TX28: + case 0x2800: mxs_duart_base = MX28_DUART_BASE_ADDR; break; default: diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c new file mode 100644 index 00000000000..48a7fab571a --- /dev/null +++ b/arch/arm/mach-mxs/mach-apx4devkit.c @@ -0,0 +1,260 @@ +/* + * Copyright (C) 2011-2012 + * Lauri Hintsala, Bluegiga, <lauri.hintsala@bluegiga.com> + * Veli-Pekka Peltola, Bluegiga, <veli-pekka.peltola@bluegiga.com> + * + * based on: mach-mx28evk.c + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/clk.h> +#include <linux/i2c.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/micrel_phy.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <mach/common.h> +#include <mach/digctl.h> +#include <mach/iomux-mx28.h> + +#include "devices-mx28.h" + +#define APX4DEVKIT_GPIO_USERLED MXS_GPIO_NR(3, 28) + +static const iomux_cfg_t apx4devkit_pads[] __initconst = { + /* duart */ + MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, + MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL, + + /* auart0 */ + MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL, + MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL, + MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL, + MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL, + + /* auart1 */ + MX28_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL, + MX28_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL, + + /* auart2 */ + MX28_PAD_SSP2_SCK__AUART2_RX | MXS_PAD_CTRL, + MX28_PAD_SSP2_MOSI__AUART2_TX | MXS_PAD_CTRL, + + /* auart3 */ + MX28_PAD_SSP2_MISO__AUART3_RX | MXS_PAD_CTRL, + MX28_PAD_SSP2_SS0__AUART3_TX | MXS_PAD_CTRL, + +#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP) + /* fec0 */ + MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC, + MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC, + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC, + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC, + MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC, + + /* i2c */ + MX28_PAD_I2C0_SCL__I2C0_SCL, + MX28_PAD_I2C0_SDA__I2C0_SDA, + + /* mmc0 */ + MX28_PAD_SSP0_DATA0__SSP0_D0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA1__SSP0_D1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA2__SSP0_D2 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA3__SSP0_D3 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA4__SSP0_D4 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA5__SSP0_D5 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA6__SSP0_D6 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA7__SSP0_D7 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_CMD__SSP0_CMD | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_SSP0_SCK__SSP0_SCK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + + /* led */ + MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL, + + /* saif0 & saif1 */ + MX28_PAD_SAIF0_MCLK__SAIF0_MCLK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), +}; + +/* led */ +static const struct gpio_led apx4devkit_leds[] __initconst = { + { + .name = "user-led", + .default_trigger = "heartbeat", + .gpio = APX4DEVKIT_GPIO_USERLED, + }, +}; + +static const struct gpio_led_platform_data apx4devkit_led_data __initconst = { + .leds = apx4devkit_leds, + .num_leds = ARRAY_SIZE(apx4devkit_leds), +}; + +static const struct fec_platform_data mx28_fec_pdata __initconst = { + .phy = PHY_INTERFACE_MODE_RMII, +}; + +static const struct mxs_mmc_platform_data apx4devkit_mmc_pdata __initconst = { + .wp_gpio = -EINVAL, + .flags = SLOTF_4_BIT_CAPABLE, +}; + +static const struct i2c_board_info apx4devkit_i2c_boardinfo[] __initconst = { + { I2C_BOARD_INFO("sgtl5000", 0x0a) }, /* ASoC */ + { I2C_BOARD_INFO("pcf8563", 0x51) }, /* RTC */ +}; + +#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || \ + defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) +static struct regulator_consumer_supply apx4devkit_audio_consumer_supplies[] = { + REGULATOR_SUPPLY("VDDA", "0-000a"), + REGULATOR_SUPPLY("VDDIO", "0-000a"), +}; + +static struct regulator_init_data apx4devkit_vdd_reg_init_data = { + .constraints = { + .name = "3V3", + .always_on = 1, + }, + .consumer_supplies = apx4devkit_audio_consumer_supplies, + .num_consumer_supplies = ARRAY_SIZE(apx4devkit_audio_consumer_supplies), +}; + +static struct fixed_voltage_config apx4devkit_vdd_pdata = { + .supply_name = "board-3V3", + .microvolts = 3300000, + .gpio = -EINVAL, + .enabled_at_boot = 1, + .init_data = &apx4devkit_vdd_reg_init_data, +}; + +static struct platform_device apx4devkit_voltage_regulator = { + .name = "reg-fixed-voltage", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &apx4devkit_vdd_pdata, + }, +}; + +static void __init apx4devkit_add_regulators(void) +{ + platform_device_register(&apx4devkit_voltage_regulator); +} +#else +static void __init apx4devkit_add_regulators(void) {} +#endif + +static const struct mxs_saif_platform_data + apx4devkit_mxs_saif_pdata[] __initconst = { + /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */ + { + .master_mode = 1, + .master_id = 0, + }, { + .master_mode = 0, + .master_id = 0, + }, +}; + +static int apx4devkit_phy_fixup(struct phy_device *phy) +{ + phy->dev_flags |= MICREL_PHY_50MHZ_CLK; + return 0; +} + +static void __init apx4devkit_init(void) +{ + mxs_iomux_setup_multiple_pads(apx4devkit_pads, + ARRAY_SIZE(apx4devkit_pads)); + + mx28_add_duart(); + mx28_add_auart0(); + mx28_add_auart1(); + mx28_add_auart2(); + mx28_add_auart3(); + + /* + * Register fixup for the Micrel KS8031 PHY clock + * (shares same ID with KS8051) + */ + phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK, + apx4devkit_phy_fixup); + + mx28_add_fec(0, &mx28_fec_pdata); + + mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata); + + gpio_led_register_device(0, &apx4devkit_led_data); + + mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); + mx28_add_saif(0, &apx4devkit_mxs_saif_pdata[0]); + mx28_add_saif(1, &apx4devkit_mxs_saif_pdata[1]); + + apx4devkit_add_regulators(); + + mx28_add_mxs_i2c(0); + i2c_register_board_info(0, apx4devkit_i2c_boardinfo, + ARRAY_SIZE(apx4devkit_i2c_boardinfo)); + + mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0); +} + +static void __init apx4devkit_timer_init(void) +{ + mx28_clocks_init(); +} + +static struct sys_timer apx4devkit_timer = { + .init = apx4devkit_timer_init, +}; + +MACHINE_START(APX4DEVKIT, "Bluegiga APX4 Development Kit") + .map_io = mx28_map_io, + .init_irq = mx28_init_irq, + .timer = &apx4devkit_timer, + .init_machine = apx4devkit_init, + .restart = mxs_restart, +MACHINE_END diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c index 2f2758230ed..06d79963611 100644 --- a/arch/arm/mach-mxs/mach-m28evk.c +++ b/arch/arm/mach-mxs/mach-m28evk.c @@ -247,18 +247,15 @@ static int __init m28evk_fec_get_mac(void) u32 val; const u32 *ocotp = mxs_get_ocotp(); - if (!ocotp) { - pr_err("%s: timeout when reading fec mac from OCOTP\n", - __func__); + if (!ocotp) return -ETIMEDOUT; - } /* * OCOTP only stores the last 4 octets for each mac address, * so hard-code DENX OUI (C0:E5:4E) here. */ for (i = 0; i < 2; i++) { - val = ocotp[i * 4]; + val = ocotp[i]; mx28_fec_pdata[i].mac[0] = 0xC0; mx28_fec_pdata[i].mac[1] = 0xE5; mx28_fec_pdata[i].mac[2] = 0x4E; diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index fdb0a5664dd..e386c142f93 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -223,7 +223,6 @@ static const struct gpio_led_platform_data mx28evk_led_data __initconst = { /* fec */ static void __init mx28evk_fec_reset(void) { - int ret; struct clk *clk; /* Enable fec phy clock */ @@ -231,32 +230,7 @@ static void __init mx28evk_fec_reset(void) if (!IS_ERR(clk)) clk_prepare_enable(clk); - /* Power up fec phy */ - ret = gpio_request(MX28EVK_FEC_PHY_POWER, "fec-phy-power"); - if (ret) { - pr_err("Failed to request gpio fec-phy-%s: %d\n", "power", ret); - return; - } - - ret = gpio_direction_output(MX28EVK_FEC_PHY_POWER, 0); - if (ret) { - pr_err("Failed to drive gpio fec-phy-%s: %d\n", "power", ret); - return; - } - - /* Reset fec phy */ - ret = gpio_request(MX28EVK_FEC_PHY_RESET, "fec-phy-reset"); - if (ret) { - pr_err("Failed to request gpio fec-phy-%s: %d\n", "reset", ret); - return; - } - - gpio_direction_output(MX28EVK_FEC_PHY_RESET, 0); - if (ret) { - pr_err("Failed to drive gpio fec-phy-%s: %d\n", "reset", ret); - return; - } - + gpio_set_value(MX28EVK_FEC_PHY_RESET, 0); mdelay(1); gpio_set_value(MX28EVK_FEC_PHY_RESET, 1); } @@ -278,14 +252,14 @@ static int __init mx28evk_fec_get_mac(void) const u32 *ocotp = mxs_get_ocotp(); if (!ocotp) - goto error; + return -ETIMEDOUT; /* * OCOTP only stores the last 4 octets for each mac address, * so hard-code Freescale OUI (00:04:9f) here. */ for (i = 0; i < 2; i++) { - val = ocotp[i * 4]; + val = ocotp[i]; mx28_fec_pdata[i].mac[0] = 0x00; mx28_fec_pdata[i].mac[1] = 0x04; mx28_fec_pdata[i].mac[2] = 0x9f; @@ -295,10 +269,6 @@ static int __init mx28evk_fec_get_mac(void) } return 0; - -error: - pr_err("%s: timeout when reading fec mac from OCOTP\n", __func__); - return -ETIMEDOUT; } /* @@ -417,9 +387,14 @@ static void __init mx28evk_add_regulators(void) static void __init mx28evk_add_regulators(void) {} #endif -static struct gpio mx28evk_lcd_gpios[] = { +static const struct gpio mx28evk_gpios[] __initconst = { { MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" }, { MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" }, + { MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, "flexcan-switch" }, + { MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power" }, + { MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power" }, + { MX28EVK_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" }, + { MX28EVK_FEC_PHY_RESET, GPIOF_DIR_OUT, "fec-phy-reset" }, }; static const struct mxs_saif_platform_data @@ -447,25 +422,18 @@ static void __init mx28evk_init(void) if (mx28evk_fec_get_mac()) pr_warn("%s: failed on fec mac setup\n", __func__); + ret = gpio_request_array(mx28evk_gpios, ARRAY_SIZE(mx28evk_gpios)); + if (ret) + pr_err("One or more GPIOs failed to be requested: %d\n", ret); + mx28evk_fec_reset(); mx28_add_fec(0, &mx28_fec_pdata[0]); mx28_add_fec(1, &mx28_fec_pdata[1]); - ret = gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, - "flexcan-switch"); - if (ret) { - pr_err("failed to request gpio flexcan-switch: %d\n", ret); - } else { - mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]); - mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]); - } + mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]); + mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]); - ret = gpio_request_array(mx28evk_lcd_gpios, - ARRAY_SIZE(mx28evk_lcd_gpios)); - if (ret) - pr_warn("failed to request gpio pins for lcd: %d\n", ret); - else - mx28_add_mxsfb(&mx28evk_mxsfb_pdata); + mx28_add_mxsfb(&mx28evk_mxsfb_pdata); mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]); @@ -480,20 +448,8 @@ static void __init mx28evk_init(void) mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0); - /* power on mmc slot by writing 0 to the gpio */ - ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, - "mmc0-slot-power"); - if (ret) - pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret); - else - mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); - - ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, - "mmc1-slot-power"); - if (ret) - pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret); - else - mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); + mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); + mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); mx28_add_rtc_stmp3xxx(); diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c index fb042da29bd..a9b4bbcdafb 100644 --- a/arch/arm/mach-mxs/pm.c +++ b/arch/arm/mach-mxs/pm.c @@ -15,13 +15,12 @@ #include <linux/kernel.h> #include <linux/suspend.h> #include <linux/io.h> -#include <mach/system.h> static int mxs_suspend_enter(suspend_state_t state) { switch (state) { case PM_SUSPEND_MEM: - arch_idle(); + cpu_do_idle(); break; default: diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c index 30042e23bfa..80ac1fca8a0 100644 --- a/arch/arm/mach-mxs/system.c +++ b/arch/arm/mach-mxs/system.c @@ -37,6 +37,8 @@ #define MXS_MODULE_CLKGATE (1 << 30) #define MXS_MODULE_SFTRST (1 << 31) +#define CLKCTRL_TIMEOUT 10 /* 10 ms */ + static void __iomem *mxs_clkctrl_reset_addr; /* @@ -137,3 +139,17 @@ error: return -ETIMEDOUT; } EXPORT_SYMBOL(mxs_reset_block); + +int mxs_clkctrl_timeout(unsigned int reg_offset, unsigned int mask) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(CLKCTRL_TIMEOUT); + while (readl_relaxed(MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR) + + reg_offset) & mask) { + if (time_after(jiffies, timeout)) { + pr_err("Timeout at CLKCTRL + 0x%x\n", reg_offset); + return -ETIMEDOUT; + } + } + + return 0; +} |