5 files changed, 3 insertions, 15 deletions
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index aa627465d91..27c2cb7ab81 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -23,9 +23,9 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-vic.h>
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
-#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <asm/mach/irq.h>
 
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index 241e1b9c58c..9b558eb3070 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -28,7 +28,6 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <linux/platform_data/eth-netx.h>
 
@@ -204,7 +203,6 @@ MACHINE_START(NXDB500, "Hilscher nxdb500")
 	.atag_offset	= 0x100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.init_time	= netx_timer_init,
 	.init_machine	= nxdb500_init,
 	.restart	= netx_restart,
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index 055aeecedde..a5e86cd365e 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -28,7 +28,6 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <linux/platform_data/eth-netx.h>
 
@@ -97,7 +96,6 @@ MACHINE_START(NXDKN, "Hilscher nxdkn")
 	.atag_offset	= 0x100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.init_time	= netx_timer_init,
 	.init_machine	= nxdkn_init,
 	.restart	= netx_restart,
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index 018e91c55b0..ad17885d015 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -28,7 +28,6 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <linux/platform_data/eth-netx.h>
 
@@ -181,7 +180,6 @@ MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
 	.atag_offset	= 0x100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
-	.handle_irq	= vic_handle_irq,
 	.init_time	= netx_timer_init,
 	.init_machine	= nxeb500hmi_init,
 	.restart	= netx_restart,
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index 0dee4524494..6df42e64303 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -76,7 +76,6 @@ static int netx_set_next_event(unsigned long evt,
 
 static struct clock_event_device netx_clockevent = {
 	.name = "netx-timer" __stringify(TIMER_CLOCKEVENT),
-	.shift = 32,
 	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_next_event = netx_set_next_event,
 	.set_mode = netx_set_mode,
@@ -140,14 +139,9 @@ void __init netx_timer_init(void)
 	clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE),
 		"netx_timer", CLOCK_TICK_RATE, 200, 32, clocksource_mmio_readl_up);
 
-	netx_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
-			netx_clockevent.shift);
-	netx_clockevent.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &netx_clockevent);
 	/* with max_delta_ns >= delta2ns(0x800) the system currently runs fine.
 	 * Adding some safety ... */
-	netx_clockevent.min_delta_ns =
-		clockevent_delta2ns(0xa00, &netx_clockevent);
 	netx_clockevent.cpumask = cpumask_of(0);
-	clockevents_register_device(&netx_clockevent);
+	clockevents_config_and_register(&netx_clockevent, CLOCK_TICK_RATE,
+					0xa00, 0xfffffffe);
 }