summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-nomadik
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-nomadik')
-rw-r--r--arch/arm/mach-nomadik/Makefile2
-rw-r--r--arch/arm/mach-nomadik/board-nhk8815.c67
-rw-r--r--arch/arm/mach-nomadik/clock.c75
-rw-r--r--arch/arm/mach-nomadik/clock.h15
-rw-r--r--arch/arm/mach-nomadik/cpu-8815.c126
-rw-r--r--arch/arm/mach-nomadik/i2c-8815nhk.c38
-rw-r--r--arch/arm/mach-nomadik/include/mach/irqs.h85
7 files changed, 179 insertions, 229 deletions
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index a6bbd1a7b4e..a42c9a33d3b 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -7,8 +7,6 @@
# Object file lists.
-obj-y += clock.o
-
# Cpu revision
obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 2e8d3e176bc..f4535a7dadf 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -14,12 +14,14 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
+#include <linux/amba/mmci.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/onenand.h>
#include <linux/mtd/partitions.h>
+#include <linux/i2c.h>
#include <linux/io.h>
#include <asm/hardware/vic.h>
#include <asm/sizes.h>
@@ -185,16 +187,28 @@ static void __init nhk8815_onenand_init(void)
#endif
}
-static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE,
- { IRQ_UART0 }, NULL);
+static struct mmci_platform_data mmcsd_plat_data = {
+ .ocr_mask = MMC_VDD_29_30,
+ .f_max = 48000000,
+ .gpio_wp = -1,
+ .gpio_cd = 111,
+ .cd_invert = true,
+ .capabilities = MMC_CAP_MMC_HIGHSPEED |
+ MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA,
+};
-static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE,
- { IRQ_UART1 }, NULL);
+static int __init nhk8815_mmcsd_init(void)
+{
+ int ret;
-static struct amba_device *amba_devs[] __initdata = {
- &uart0_device,
- &uart1_device,
-};
+ ret = gpio_request(112, "card detect bias");
+ if (ret)
+ return ret;
+ gpio_direction_output(112, 0);
+ amba_apb_device_add(NULL, "mmci", NOMADIK_SDI_BASE, SZ_4K, IRQ_SDMMC, 0, &mmcsd_plat_data, 0x10180180);
+ return 0;
+}
+module_init(nhk8815_mmcsd_init);
static struct resource nhk8815_eth_resources[] = {
{
@@ -253,17 +267,46 @@ static struct sys_timer nomadik_timer = {
.init = nomadik_timer_init,
};
+static struct i2c_board_info __initdata nhk8815_i2c0_devices[] = {
+ {
+ I2C_BOARD_INFO("stw4811", 0x2d),
+ },
+};
+
+static struct i2c_board_info __initdata nhk8815_i2c1_devices[] = {
+ {
+ I2C_BOARD_INFO("camera", 0x10),
+ },
+ {
+ I2C_BOARD_INFO("stw5095", 0x1a),
+ },
+ {
+ I2C_BOARD_INFO("lis3lv02dl", 0x1d),
+ },
+};
+
+static struct i2c_board_info __initdata nhk8815_i2c2_devices[] = {
+ {
+ I2C_BOARD_INFO("stw4811-usb", 0x2d),
+ },
+};
+
static void __init nhk8815_platform_init(void)
{
- int i;
-
cpu8815_platform_init();
nhk8815_onenand_init();
platform_add_devices(nhk8815_platform_devices,
ARRAY_SIZE(nhk8815_platform_devices));
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
- amba_device_register(amba_devs[i], &iomem_resource);
+ amba_apb_device_add(NULL, "uart0", NOMADIK_UART0_BASE, SZ_4K, IRQ_UART0, 0, NULL, 0);
+ amba_apb_device_add(NULL, "uart1", NOMADIK_UART1_BASE, SZ_4K, IRQ_UART1, 0, NULL, 0);
+
+ i2c_register_board_info(0, nhk8815_i2c0_devices,
+ ARRAY_SIZE(nhk8815_i2c0_devices));
+ i2c_register_board_info(1, nhk8815_i2c1_devices,
+ ARRAY_SIZE(nhk8815_i2c1_devices));
+ i2c_register_board_info(2, nhk8815_i2c2_devices,
+ ARRAY_SIZE(nhk8815_i2c2_devices));
}
MACHINE_START(NOMADIK, "NHK8815")
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
deleted file mode 100644
index 48a59f24e10..00000000000
--- a/arch/arm/mach-nomadik/clock.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/arch/arm/mach-nomadik/clock.c
- *
- * Copyright (C) 2009 Alessandro Rubini
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include "clock.h"
-
-/*
- * The nomadik board uses generic clocks, but the serial pl011 file
- * calls clk_enable(), clk_disable(), clk_get_rate(), so we provide them
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/* enable and disable do nothing */
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-static struct clk clk_24 = {
- .rate = 2400000,
-};
-
-static struct clk clk_48 = {
- .rate = 48 * 1000 * 1000,
-};
-
-/*
- * Catch-all default clock to satisfy drivers using the clk API. We don't
- * model the actual hardware clocks yet.
- */
-static struct clk clk_default;
-
-#define CLK(_clk, dev) \
- { \
- .clk = _clk, \
- .dev_id = dev, \
- }
-
-static struct clk_lookup lookups[] = {
- {
- .con_id = "apb_pclk",
- .clk = &clk_default,
- },
- CLK(&clk_24, "mtu0"),
- CLK(&clk_24, "mtu1"),
- CLK(&clk_48, "uart0"),
- CLK(&clk_48, "uart1"),
- CLK(&clk_default, "gpio.0"),
- CLK(&clk_default, "gpio.1"),
- CLK(&clk_default, "gpio.2"),
- CLK(&clk_default, "gpio.3"),
- CLK(&clk_default, "rng"),
-};
-
-int __init clk_init(void)
-{
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
- return 0;
-}
diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h
deleted file mode 100644
index 78da2e7c398..00000000000
--- a/arch/arm/mach-nomadik/clock.h
+++ /dev/null
@@ -1,15 +0,0 @@
-
-/*
- * linux/arch/arm/mach-nomadik/clock.h
- *
- * Copyright (C) 2009 Alessandro Rubini
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-struct clk {
- unsigned long rate;
-};
-
-int __init clk_init(void);
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 27f43a46985..6fd8e46567a 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -22,6 +22,10 @@
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_data/clk-nomadik.h>
#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
@@ -32,91 +36,63 @@
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
-#include "clock.h"
#include "cpu-8815.h"
-#define __MEM_4K_RESOURCE(x) \
- .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
-
/* The 8815 has 4 GPIO blocks, let's register them immediately */
-
-#define GPIO_RESOURCE(block) \
- { \
- .start = NOMADIK_GPIO##block##_BASE, \
- .end = NOMADIK_GPIO##block##_BASE + SZ_4K - 1, \
- .flags = IORESOURCE_MEM, \
- }, \
- { \
- .start = IRQ_GPIO##block, \
- .end = IRQ_GPIO##block, \
- .flags = IORESOURCE_IRQ, \
- }
-
-#define GPIO_DEVICE(block) \
- { \
- .name = "gpio", \
- .id = block, \
- .num_resources = 2, \
- .resource = &cpu8815_gpio_resources[block * 2], \
- .dev = { \
- .platform_data = &cpu8815_gpio[block], \
- }, \
- }
-
-static struct nmk_gpio_platform_data cpu8815_gpio[] = {
- {
- .name = "GPIO-0-31",
- .first_gpio = 0,
- .first_irq = NOMADIK_GPIO_TO_IRQ(0),
- }, {
- .name = "GPIO-32-63",
- .first_gpio = 32,
- .first_irq = NOMADIK_GPIO_TO_IRQ(32),
- }, {
- .name = "GPIO-64-95",
- .first_gpio = 64,
- .first_irq = NOMADIK_GPIO_TO_IRQ(64),
- }, {
- .name = "GPIO-96-127", /* 124..127 not routed to pin */
- .first_gpio = 96,
- .first_irq = NOMADIK_GPIO_TO_IRQ(96),
- }
+static resource_size_t __initdata cpu8815_gpio_base[] = {
+ NOMADIK_GPIO0_BASE,
+ NOMADIK_GPIO1_BASE,
+ NOMADIK_GPIO2_BASE,
+ NOMADIK_GPIO3_BASE,
};
-static struct resource cpu8815_gpio_resources[] = {
- GPIO_RESOURCE(0),
- GPIO_RESOURCE(1),
- GPIO_RESOURCE(2),
- GPIO_RESOURCE(3),
-};
-
-static struct platform_device cpu8815_platform_gpio[] = {
- GPIO_DEVICE(0),
- GPIO_DEVICE(1),
- GPIO_DEVICE(2),
- GPIO_DEVICE(3),
-};
+static struct platform_device *
+cpu8815_add_gpio(int id, resource_size_t addr, int irq,
+ struct nmk_gpio_platform_data *pdata)
+{
+ struct resource resources[] = {
+ {
+ .start = addr,
+ .end = addr + 127,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = irq,
+ .end = irq,
+ .flags = IORESOURCE_IRQ,
+ }
+ };
+
+ return platform_device_register_resndata(NULL, "gpio", id,
+ resources, ARRAY_SIZE(resources),
+ pdata, sizeof(*pdata));
+}
-static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL);
+void cpu8815_add_gpios(resource_size_t *base, int num, int irq,
+ struct nmk_gpio_platform_data *pdata)
+{
+ int first = 0;
+ int i;
-static struct platform_device *platform_devs[] __initdata = {
- cpu8815_platform_gpio + 0,
- cpu8815_platform_gpio + 1,
- cpu8815_platform_gpio + 2,
- cpu8815_platform_gpio + 3,
-};
+ for (i = 0; i < num; i++, first += 32, irq++) {
+ pdata->first_gpio = first;
+ pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
+ pdata->num_gpio = 32;
-static struct amba_device *amba_devs[] __initdata = {
- &cpu8815_amba_rng_device
-};
+ cpu8815_add_gpio(i, base[i], irq, pdata);
+ }
+}
static int __init cpu8815_init(void)
{
- int i;
-
- platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
- amba_device_register(amba_devs[i], &iomem_resource);
+ struct nmk_gpio_platform_data pdata = {
+ /* No custom data yet */
+ };
+
+ cpu8815_add_gpios(cpu8815_gpio_base, ARRAY_SIZE(cpu8815_gpio_base),
+ IRQ_GPIO0, &pdata);
+ amba_apb_device_add(NULL, "rng", NOMADIK_RNG_BASE, SZ_4K, 0, 0, NULL, 0);
+ amba_apb_device_add(NULL, "rtc-pl031", NOMADIK_RTC_BASE, SZ_4K, IRQ_RTC_RTT, 0, NULL, 0);
return 0;
}
arch_initcall(cpu8815_init);
@@ -147,7 +123,7 @@ void __init cpu8815_init_irq(void)
* Init clocks here so that they are available for system timer
* initialization.
*/
- clk_init();
+ nomadik_clk_init();
}
/*
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
index 0fc2f6f1cc9..6d14454d460 100644
--- a/arch/arm/mach-nomadik/i2c-8815nhk.c
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -5,6 +5,7 @@
#include <linux/i2c-gpio.h>
#include <linux/platform_device.h>
#include <plat/gpio-nomadik.h>
+#include <plat/pincfg.h>
/*
* There are two busses in the 8815NHK.
@@ -12,19 +13,27 @@
* use bit-bang through GPIO by now, to keep things simple
*/
+/* I2C0 connected to the STw4811 power management chip */
static struct i2c_gpio_platform_data nhk8815_i2c_data0 = {
/* keep defaults for timeouts; pins are push-pull bidirectional */
.scl_pin = 62,
.sda_pin = 63,
};
+/* I2C1 connected to various sensors */
static struct i2c_gpio_platform_data nhk8815_i2c_data1 = {
/* keep defaults for timeouts; pins are push-pull bidirectional */
.scl_pin = 53,
.sda_pin = 54,
};
-/* first bus: GPIO XX and YY */
+/* I2C2 connected to the USB portions of the STw4811 only */
+static struct i2c_gpio_platform_data nhk8815_i2c_data2 = {
+ /* keep defaults for timeouts; pins are push-pull bidirectional */
+ .scl_pin = 73,
+ .sda_pin = 74,
+};
+
static struct platform_device nhk8815_i2c_dev0 = {
.name = "i2c-gpio",
.id = 0,
@@ -32,7 +41,7 @@ static struct platform_device nhk8815_i2c_dev0 = {
.platform_data = &nhk8815_i2c_data0,
},
};
-/* second bus: GPIO XX and YY */
+
static struct platform_device nhk8815_i2c_dev1 = {
.name = "i2c-gpio",
.id = 1,
@@ -41,15 +50,29 @@ static struct platform_device nhk8815_i2c_dev1 = {
},
};
+static struct platform_device nhk8815_i2c_dev2 = {
+ .name = "i2c-gpio",
+ .id = 2,
+ .dev = {
+ .platform_data = &nhk8815_i2c_data2,
+ },
+};
+
+static pin_cfg_t cpu8815_pins_i2c[] = {
+ PIN_CFG_INPUT(62, GPIO, PULLUP),
+ PIN_CFG_INPUT(63, GPIO, PULLUP),
+ PIN_CFG_INPUT(53, GPIO, PULLUP),
+ PIN_CFG_INPUT(54, GPIO, PULLUP),
+ PIN_CFG_INPUT(73, GPIO, PULLUP),
+ PIN_CFG_INPUT(74, GPIO, PULLUP),
+};
+
static int __init nhk8815_i2c_init(void)
{
- nmk_gpio_set_mode(nhk8815_i2c_data0.scl_pin, NMK_GPIO_ALT_GPIO);
- nmk_gpio_set_mode(nhk8815_i2c_data0.sda_pin, NMK_GPIO_ALT_GPIO);
+ nmk_config_pins(cpu8815_pins_i2c, ARRAY_SIZE(cpu8815_pins_i2c));
platform_device_register(&nhk8815_i2c_dev0);
-
- nmk_gpio_set_mode(nhk8815_i2c_data1.scl_pin, NMK_GPIO_ALT_GPIO);
- nmk_gpio_set_mode(nhk8815_i2c_data1.sda_pin, NMK_GPIO_ALT_GPIO);
platform_device_register(&nhk8815_i2c_dev1);
+ platform_device_register(&nhk8815_i2c_dev2);
return 0;
}
@@ -58,6 +81,7 @@ static void __exit nhk8815_i2c_exit(void)
{
platform_device_unregister(&nhk8815_i2c_dev0);
platform_device_unregister(&nhk8815_i2c_dev1);
+ platform_device_unregister(&nhk8815_i2c_dev2);
return;
}
diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h
index 8faabc56039..a118e615f86 100644
--- a/arch/arm/mach-nomadik/include/mach/irqs.h
+++ b/arch/arm/mach-nomadik/include/mach/irqs.h
@@ -22,56 +22,56 @@
#include <mach/hardware.h>
-#define IRQ_VIC_START 0 /* first VIC interrupt is 0 */
+#define IRQ_VIC_START 1 /* first VIC interrupt is 1 */
/*
* Interrupt numbers generic for all Nomadik Chip cuts
*/
-#define IRQ_WATCHDOG 0
-#define IRQ_SOFTINT 1
-#define IRQ_CRYPTO 2
-#define IRQ_OWM 3
-#define IRQ_MTU0 4
-#define IRQ_MTU1 5
-#define IRQ_GPIO0 6
-#define IRQ_GPIO1 7
-#define IRQ_GPIO2 8
-#define IRQ_GPIO3 9
-#define IRQ_RTC_RTT 10
-#define IRQ_SSP 11
-#define IRQ_UART0 12
-#define IRQ_DMA1 13
-#define IRQ_CLCD_MDIF 14
-#define IRQ_DMA0 15
-#define IRQ_PWRFAIL 16
-#define IRQ_UART1 17
-#define IRQ_FIRDA 18
-#define IRQ_MSP0 19
-#define IRQ_I2C0 20
-#define IRQ_I2C1 21
-#define IRQ_SDMMC 22
-#define IRQ_USBOTG 23
-#define IRQ_SVA_IT0 24
-#define IRQ_SVA_IT1 25
-#define IRQ_SAA_IT0 26
-#define IRQ_SAA_IT1 27
-#define IRQ_UART2 28
-#define IRQ_MSP2 31
-#define IRQ_L2CC 48
-#define IRQ_HPI 49
-#define IRQ_SKE 50
-#define IRQ_KP 51
-#define IRQ_MEMST 54
-#define IRQ_SGA_IT 58
-#define IRQ_USBM 60
-#define IRQ_MSP1 62
+#define IRQ_WATCHDOG 1
+#define IRQ_SOFTINT 2
+#define IRQ_CRYPTO 3
+#define IRQ_OWM 4
+#define IRQ_MTU0 5
+#define IRQ_MTU1 6
+#define IRQ_GPIO0 7
+#define IRQ_GPIO1 8
+#define IRQ_GPIO2 9
+#define IRQ_GPIO3 10
+#define IRQ_RTC_RTT 11
+#define IRQ_SSP 12
+#define IRQ_UART0 13
+#define IRQ_DMA1 14
+#define IRQ_CLCD_MDIF 15
+#define IRQ_DMA0 16
+#define IRQ_PWRFAIL 17
+#define IRQ_UART1 18
+#define IRQ_FIRDA 19
+#define IRQ_MSP0 20
+#define IRQ_I2C0 21
+#define IRQ_I2C1 22
+#define IRQ_SDMMC 23
+#define IRQ_USBOTG 24
+#define IRQ_SVA_IT0 25
+#define IRQ_SVA_IT1 26
+#define IRQ_SAA_IT0 27
+#define IRQ_SAA_IT1 28
+#define IRQ_UART2 29
+#define IRQ_MSP2 30
+#define IRQ_L2CC 49
+#define IRQ_HPI 50
+#define IRQ_SKE 51
+#define IRQ_KP 52
+#define IRQ_MEMST 55
+#define IRQ_SGA_IT 59
+#define IRQ_USBM 61
+#define IRQ_MSP1 63
-#define NOMADIK_SOC_NR_IRQS 64
+#define NOMADIK_GPIO_OFFSET (IRQ_VIC_START+64)
/* After chip-specific IRQ numbers we have the GPIO ones */
#define NOMADIK_NR_GPIO 128 /* last 4 not wired to pins */
-#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_SOC_NR_IRQS)
-#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_SOC_NR_IRQS)
+#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_GPIO_OFFSET)
+#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_GPIO_OFFSET)
#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
/* Following two are used by entry_macro.S, to access our dual-vic */
@@ -79,4 +79,3 @@
#define VIC_REG_IRQSR1 0x20
#endif /* __ASM_ARCH_IRQS_H */
-