diff options
Diffstat (limited to 'arch/arm/mach-omap/irq.c')
| -rw-r--r-- | arch/arm/mach-omap/irq.c | 219 |
1 files changed, 219 insertions, 0 deletions
diff --git a/arch/arm/mach-omap/irq.c b/arch/arm/mach-omap/irq.c new file mode 100644 index 00000000000..f01c99266a8 --- /dev/null +++ b/arch/arm/mach-omap/irq.c @@ -0,0 +1,219 @@ +/* + * linux/arch/arm/mach-omap/irq.c + * + * Interrupt handler for all OMAP boards + * + * Copyright (C) 2004 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * Major cleanups by Juha Yrjölä <juha.yrjola@nokia.com> + * + * Completely re-written to support various OMAP chips with bank specific + * interrupt handlers. + * + * Some snippets of the code taken from the older OMAP interrupt handler + * Copyright (C) 2001 RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> + * + * GPIO interrupt handler moved to gpio.c by Juha Yrjola + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/ptrace.h> + +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/mach/irq.h> +#include <asm/arch/gpio.h> + +#include <asm/io.h> + +#define IRQ_BANK(irq) ((irq) >> 5) +#define IRQ_BIT(irq) ((irq) & 0x1f) + +struct omap_irq_bank { + unsigned long base_reg; + unsigned long trigger_map; +}; + +static unsigned int irq_bank_count = 0; +static struct omap_irq_bank *irq_banks; + +static inline unsigned int irq_bank_readl(int bank, int offset) +{ + return omap_readl(irq_banks[bank].base_reg + offset); +} + +static inline void irq_bank_writel(unsigned long value, int bank, int offset) +{ + omap_writel(value, irq_banks[bank].base_reg + offset); +} + +static void omap_ack_irq(unsigned int irq) +{ + if (irq > 31) + omap_writel(0x1, OMAP_IH2_BASE + IRQ_CONTROL_REG_OFFSET); + + omap_writel(0x1, OMAP_IH1_BASE + IRQ_CONTROL_REG_OFFSET); +} + +static void omap_mask_irq(unsigned int irq) +{ + int bank = IRQ_BANK(irq); + u32 l; + + l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); + l |= 1 << IRQ_BIT(irq); + omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); +} + +static void omap_unmask_irq(unsigned int irq) +{ + int bank = IRQ_BANK(irq); + u32 l; + + l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); + l &= ~(1 << IRQ_BIT(irq)); + omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); +} + +static void omap_mask_ack_irq(unsigned int irq) +{ + omap_mask_irq(irq); + omap_ack_irq(irq); +} + +/* + * Allows tuning the IRQ type and priority + * + * NOTE: There is currently no OMAP fiq handler for Linux. Read the + * mailing list threads on FIQ handlers if you are planning to + * add a FIQ handler for OMAP. + */ +static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger) +{ + signed int bank; + unsigned long val, offset; + + bank = IRQ_BANK(irq); + /* FIQ is only available on bank 0 interrupts */ + fiq = bank ? 0 : (fiq & 0x1); + val = fiq | ((priority & 0x1f) << 2) | ((trigger & 0x1) << 1); + offset = IRQ_ILR0_REG_OFFSET + IRQ_BIT(irq) * 0x4; + irq_bank_writel(val, bank, offset); +} + +#ifdef CONFIG_ARCH_OMAP730 +static struct omap_irq_bank omap730_irq_banks[] = { + { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, + { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, + { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, +}; +#endif + +#ifdef CONFIG_ARCH_OMAP1510 +static struct omap_irq_bank omap1510_irq_banks[] = { + { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff }, + { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xffbfffed }, +}; +#endif + +#if defined(CONFIG_ARCH_OMAP16XX) + +static struct omap_irq_bank omap1610_irq_banks[] = { + { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3fefe8f }, + { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb7c1fd }, + { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0xfffff7ff }, + { .base_reg = OMAP_IH2_BASE + 0x200, .trigger_map = 0xffffffff }, +}; +#endif + +static struct irqchip omap_irq_chip = { + .ack = omap_mask_ack_irq, + .mask = omap_mask_irq, + .unmask = omap_unmask_irq, +}; + +void __init omap_init_irq(void) +{ + int i, j; + +#ifdef CONFIG_ARCH_OMAP730 + if (cpu_is_omap730()) { + irq_banks = omap730_irq_banks; + irq_bank_count = ARRAY_SIZE(omap730_irq_banks); + } +#endif +#ifdef CONFIG_ARCH_OMAP1510 + if (cpu_is_omap1510()) { + irq_banks = omap1510_irq_banks; + irq_bank_count = ARRAY_SIZE(omap1510_irq_banks); + } +#endif +#if defined(CONFIG_ARCH_OMAP16XX) + if (cpu_is_omap16xx()) { + irq_banks = omap1610_irq_banks; + irq_bank_count = ARRAY_SIZE(omap1610_irq_banks); + } +#endif + printk("Total of %i interrupts in %i interrupt banks\n", + irq_bank_count * 32, irq_bank_count); + + /* Mask and clear all interrupts */ + for (i = 0; i < irq_bank_count; i++) { + irq_bank_writel(~0x0, i, IRQ_MIR_REG_OFFSET); + irq_bank_writel(0x0, i, IRQ_ITR_REG_OFFSET); + } + + /* Clear any pending interrupts */ + irq_bank_writel(0x03, 0, IRQ_CONTROL_REG_OFFSET); + irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET); + + /* Enable interrupts in global mask */ + if (cpu_is_omap730()) { + irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET); + } + + /* Install the interrupt handlers for each bank */ + for (i = 0; i < irq_bank_count; i++) { + for (j = i * 32; j < (i + 1) * 32; j++) { + int irq_trigger; + + irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j); + omap_irq_set_cfg(j, 0, 0, irq_trigger); + + set_irq_chip(j, &omap_irq_chip); + set_irq_handler(j, do_level_IRQ); + set_irq_flags(j, IRQF_VALID); + } + } + + /* Unmask level 2 handler */ + if (cpu_is_omap730()) { + omap_unmask_irq(INT_730_IH2_IRQ); + } else { + omap_unmask_irq(INT_IH2_IRQ); + } +} |