diff options
Diffstat (limited to 'arch/arm/mach-omap1/board-h2.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-h2.c | 45 |
1 files changed, 42 insertions, 3 deletions
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 48c8c9195dc..2f8f6ecf111 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -20,22 +20,23 @@ */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/delay.h> +#include <linux/i2c.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/input.h> -#include <linux/workqueue.h> #include <asm/hardware.h> +#include <asm/gpio.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/arch/gpio.h> +#include <asm/arch/tps65010.h> #include <asm/arch/mux.h> #include <asm/arch/tc.h> #include <asm/arch/irda.h> @@ -277,6 +278,20 @@ static struct platform_device *h2_devices[] __initdata = { &h2_mcbsp1_device, }; +static struct i2c_board_info __initdata h2_i2c_board_info[] = { + { + I2C_BOARD_INFO("tps65010", 0x48), + .type = "tps65010", + .irq = OMAP_GPIO_IRQ(58), + }, + /* TODO when driver support is ready: + * - isp1301 OTG transceiver + * - optional ov9640 camera sensor at 0x30 + * - pcf9754 for aGPS control + * - ... etc + */ +}; + static void __init h2_init_smc91x(void) { if ((omap_request_gpio(0)) < 0) { @@ -367,6 +382,14 @@ static void __init h2_init(void) omap_board_config = h2_config; omap_board_config_size = ARRAY_SIZE(h2_config); omap_serial_init(); + + /* irq for tps65010 chip */ + omap_cfg_reg(W4_GPIO58); + if (gpio_request(58, "tps65010") == 0) + gpio_direction_input(58); + + i2c_register_board_info(1, h2_i2c_board_info, + ARRAY_SIZE(h2_i2c_board_info)); } static void __init h2_map_io(void) @@ -374,6 +397,22 @@ static void __init h2_map_io(void) omap1_map_common_io(); } +#ifdef CONFIG_TPS65010 +static int __init h2_tps_init(void) +{ + if (!machine_is_omap_h2()) + return 0; + + /* gpio3 for SD, gpio4 for VDD_DSP */ + /* FIXME send power to DSP iff it's configured */ + + /* Enable LOW_PWR */ + tps65010_set_low_pwr(ON); + return 0; +} +fs_initcall(h2_tps_init); +#endif + MACHINE_START(OMAP_H2, "TI-H2") /* Maintainer: Imre Deak <imre.deak@nokia.com> */ .phys_io = 0xfff00000, |