diff options
Diffstat (limited to 'arch/arm/mach-omap1/board-h3.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-h3.c | 57 |
1 files changed, 6 insertions, 51 deletions
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 5157eea9be3..4695965114c 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -49,8 +49,11 @@ #include <mach/keypad.h> #include <mach/dma.h> #include <mach/common.h> -#include <mach/mcbsp.h> -#include <mach/omap-alsa.h> + +#include "board-h3.h" + +/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ +#define OMAP1710_ETHR_START 0x04000300 #define H3_TS_GPIO 48 @@ -387,41 +390,6 @@ static struct spi_board_info h3_spi_board_info[] __initdata = { }, }; -static struct omap_mcbsp_reg_cfg mcbsp_regs = { - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), - .spcr1 = RINTM(3) | RRST, - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1), - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG, - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), - .srgr1 = FWID(15), - .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), - - .pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP, - /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */ -}; - -static struct omap_alsa_codec_config alsa_config = { - .name = "H3 TSC2101", - .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, /* tsc2101_configure, */ - .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */ - .codec_clock_setup = NULL, /* tsc2101_clock_setup, */ - .codec_clock_on = NULL, /* tsc2101_clock_on, */ - .codec_clock_off = NULL, /* tsc2101_clock_off, */ - .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */ -}; - -static struct platform_device h3_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &alsa_config, - }, -}; - static struct platform_device *devices[] __initdata = { &nor_device, &nand_device, @@ -430,7 +398,6 @@ static struct platform_device *devices[] __initdata = { &h3_irda_device, &h3_kp_device, &h3_lcd_device, - &h3_mcbsp1_device, }; static struct omap_usb_config h3_usb_config __initdata = { @@ -456,7 +423,6 @@ static struct omap_lcd_config h3_lcd_config __initdata = { }; static struct omap_board_config_kernel h3_config[] __initdata = { - { OMAP_TAG_USB, &h3_usb_config }, { OMAP_TAG_UART, &h3_uart_config }, { OMAP_TAG_LCD, &h3_lcd_config }, }; @@ -472,18 +438,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { }, }; -static struct omap_gpio_switch h3_gpio_switches[] __initdata = { - { - .name = "mmc_slot", - .gpio = OMAP_MPUIO(1), - .type = OMAP_GPIO_SWITCH_TYPE_COVER, - .debounce_rising = 100, - .debounce_falling = 0, - .notify = h3_mmc_slot_cover_handler, - .notify_data = NULL, - }, -}; - #define H3_NAND_RB_GPIO_PIN 10 static int nand_dev_ready(struct omap_nand_platform_data *data) @@ -522,6 +476,7 @@ static void __init h3_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, h3_i2c_board_info, ARRAY_SIZE(h3_i2c_board_info)); + omap_usb_init(&h3_usb_config); h3_mmc_init(); } |