diff options
Diffstat (limited to 'arch/arm/mach-omap1/board-palmte.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-palmte.c | 84 |
1 files changed, 23 insertions, 61 deletions
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 2f9d00a0013..ca1a4bf78a1 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -10,6 +10,8 @@ * Maintainers : http://palmtelinux.sf.net * palmtelinux-developpers@lists.sf.net * + * Copyright (c) 2006 Andrzej Zaborowski <balrog@zabor.org> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -24,8 +26,8 @@ #include <linux/spi/spi.h> #include <linux/spi/tsc2102.h> #include <linux/interrupt.h> +#include <linux/apm-emulation.h> -#include <asm/apm.h> #include <asm/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -51,11 +53,11 @@ static void __init omap_palmte_init_irq(void) omap_gpio_init(); } -static int palmte_keymap[] = { - KEY(0, 0, KEY_F1), - KEY(0, 1, KEY_F2), - KEY(0, 2, KEY_F3), - KEY(0, 3, KEY_F4), +static const int palmte_keymap[] = { + KEY(0, 0, KEY_F1), /* Calendar */ + KEY(0, 1, KEY_F2), /* Contacts */ + KEY(0, 2, KEY_F3), /* Tasks List */ + KEY(0, 3, KEY_F4), /* Note Pad */ KEY(0, 4, KEY_POWER), KEY(1, 0, KEY_LEFT), KEY(1, 1, KEY_DOWN), @@ -68,7 +70,7 @@ static int palmte_keymap[] = { static struct omap_kp_platform_data palmte_kp_data = { .rows = 8, .cols = 8, - .keymap = palmte_keymap, + .keymap = (int *) palmte_keymap, .rep = 1, .delay = 12, }; @@ -180,7 +182,7 @@ static struct platform_device palmte_irda_device = { .resource = palmte_irda_resources, }; -static struct platform_device *devices[] __initdata = { +static struct platform_device *palmte_devices[] __initdata = { &palmte_rom_device, &palmte_kp_device, &palmte_lcd_device, @@ -273,7 +275,7 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery) info->time = 0; } else { while (hi > lo + 1) { - mid = (hi + lo) >> 2; + mid = (hi + lo) >> 1; if (batt <= palmte_battery_sample[mid]) lo = mid; else @@ -321,7 +323,7 @@ static struct tsc2102_config palmte_tsc2102_config = { .alsa_config = &palmte_alsa_config, }; -static struct omap_board_config_kernel palmte_config[] = { +static struct omap_board_config_kernel palmte_config[] __initdata = { { OMAP_TAG_USB, &palmte_usb_config }, { OMAP_TAG_MMC, &palmte_mmc_config }, { OMAP_TAG_LCD, &palmte_lcd_config }, @@ -339,74 +341,34 @@ static struct spi_board_info palmte_spi_info[] __initdata = { }, }; -/* Periodically check for changes on important input pins */ -struct timer_list palmte_pin_timer; -int prev_power, prev_headphones; - -static void palmte_pin_handler(unsigned long data) { - int power, headphones; - - power = !omap_get_gpio_datain(PALMTE_DC_GPIO); - headphones = omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO); - - if (power && !prev_power) - printk(KERN_INFO "PM: cable connected\n"); - else if (!power && prev_power) - printk(KERN_INFO "PM: cable disconnected\n"); - - if (headphones && !prev_headphones) { +static void palmte_headphones_detect(void *data, int state) +{ + if (state) { /* Headphones connected, disable speaker */ omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 0); printk(KERN_INFO "PM: speaker off\n"); - } else if (!headphones && prev_headphones) { + } else { /* Headphones unplugged, re-enable speaker */ omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 1); printk(KERN_INFO "PM: speaker on\n"); } - - prev_power = power; - prev_headphones = headphones; - mod_timer(&palmte_pin_timer, jiffies + msecs_to_jiffies(500)); } -static void __init palmte_gpio_setup(void) +static void __init palmte_misc_gpio_setup(void) { - /* Set TSC2102 PINTDAV pin as input */ + /* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */ if (omap_request_gpio(PALMTE_PINTDAV_GPIO)) { printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n"); return; } omap_set_gpio_direction(PALMTE_PINTDAV_GPIO, 1); - /* Monitor cable-connected signals */ - if (omap_request_gpio(PALMTE_DC_GPIO) || - omap_request_gpio(PALMTE_USB_OR_DC_GPIO) || - omap_request_gpio(PALMTE_USBDETECT_GPIO)) { + /* Set USB-or-DC-IN pin as input (unused) */ + if (omap_request_gpio(PALMTE_USB_OR_DC_GPIO)) { printk(KERN_ERR "Could not reserve cable signal GPIO!\n"); return; } - omap_set_gpio_direction(PALMTE_DC_GPIO, 1); omap_set_gpio_direction(PALMTE_USB_OR_DC_GPIO, 1); - omap_set_gpio_direction(PALMTE_USBDETECT_GPIO, 1); - - /* Set speaker-enable pin as output */ - if (omap_request_gpio(PALMTE_SPEAKER_GPIO)) { - printk(KERN_ERR "Could not reserve speaker GPIO!\n"); - return; - } - omap_set_gpio_direction(PALMTE_SPEAKER_GPIO, 0); - - /* Monitor the headphones-connected signal */ - if (omap_request_gpio(PALMTE_HEADPHONES_GPIO)) { - printk(KERN_ERR "Could not reserve headphones signal GPIO!\n"); - return; - } - omap_set_gpio_direction(PALMTE_HEADPHONES_GPIO, 1); - - prev_power = omap_get_gpio_datain(PALMTE_DC_GPIO); - prev_headphones = !omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO); - setup_timer(&palmte_pin_timer, palmte_pin_handler, 0); - palmte_pin_handler(0); } static void __init omap_palmte_init(void) @@ -414,12 +376,12 @@ static void __init omap_palmte_init(void) omap_board_config = palmte_config; omap_board_config_size = ARRAY_SIZE(palmte_config); - platform_add_devices(devices, ARRAY_SIZE(devices)); + platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices)); spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info)); - + palmte_misc_gpio_setup(); omap_serial_init(); - palmte_gpio_setup(); + omap_register_i2c_bus(1, 100, NULL, 0); } static void __init omap_palmte_map_io(void) |