summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap1/board-perseus2.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap1/board-perseus2.c')
-rw-r--r--arch/arm/mach-omap1/board-perseus2.c80
1 files changed, 38 insertions, 42 deletions
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 67acd414263..203ae07550d 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -28,7 +28,6 @@
#include <asm/mach/map.h>
#include <plat/tc.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/fpga.h>
#include <plat/flash.h>
@@ -265,6 +264,39 @@ static void __init perseus2_init_smc91x(void)
static void __init omap_perseus2_init(void)
{
+ /* Early, board-dependent init */
+
+ /*
+ * Hold GSM Reset until needed
+ */
+ omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
+
+ /*
+ * UARTs -> done automagically by 8250 driver
+ */
+
+ /*
+ * CSx timings, GPIO Mux ... setup
+ */
+
+ /* Flash: CS0 timings setup */
+ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+ omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
+
+ /*
+ * Ethernet support through the debug board
+ * CS1 timings setup
+ */
+ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+ omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
+
+ /*
+ * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
+ * It is used as the Ethernet controller interrupt
+ */
+ omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
+ OMAP7XX_IO_CONF_9);
+
perseus2_init_smc91x();
if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
@@ -294,11 +326,6 @@ static void __init omap_perseus2_init(void)
omap_register_i2c_bus(1, 100, NULL, 0);
}
-static void __init omap_perseus2_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc omap_perseus2_io_desc[] __initdata = {
{
@@ -311,49 +338,18 @@ static struct map_desc omap_perseus2_io_desc[] __initdata = {
static void __init omap_perseus2_map_io(void)
{
- omap1_map_common_io();
+ omap7xx_map_io();
iotable_init(omap_perseus2_io_desc,
ARRAY_SIZE(omap_perseus2_io_desc));
-
- /* Early, board-dependent init */
-
- /*
- * Hold GSM Reset until needed
- */
- omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
-
- /*
- * UARTs -> done automagically by 8250 driver
- */
-
- /*
- * CSx timings, GPIO Mux ... setup
- */
-
- /* Flash: CS0 timings setup */
- omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
- omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
-
- /*
- * Ethernet support through the debug board
- * CS1 timings setup
- */
- omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
- omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
-
- /*
- * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
- * It is used as the Ethernet controller interrupt
- */
- omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
}
MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
/* Maintainer: Kevin Hilman <kjh@hilman.org> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_perseus2_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_perseus2_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_perseus2_init,
.timer = &omap1_timer,
MACHINE_END