diff options
Diffstat (limited to 'arch/arm/mach-omap1/include/mach/uncompress.h')
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/uncompress.h | 121 |
1 files changed, 119 insertions, 2 deletions
diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h index 0ff22dc075c..ad6fbe7d83f 100644 --- a/arch/arm/mach-omap1/include/mach/uncompress.h +++ b/arch/arm/mach-omap1/include/mach/uncompress.h @@ -1,5 +1,122 @@ /* - * arch/arm/mach-omap1/include/mach/uncompress.h + * arch/arm/plat-omap/include/mach/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Initially based on: + * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * Rewritten by: + * Author: <source@mvista.com> + * 2004 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. */ -#include <plat/uncompress.h> +#include <linux/types.h> +#include <linux/serial_reg.h> + +#include <asm/memory.h> +#include <asm/mach-types.h> + +#include "serial.h" + +#define MDR1_MODE_MASK 0x07 + +volatile u8 *uart_base; +int uart_shift; + +/* + * Store the DEBUG_LL uart number into memory. + * See also debug-macro.S, and serial.c for related code. + */ +static void set_omap_uart_info(unsigned char port) +{ + /* + * Get address of some.bss variable and round it down + * a la CONFIG_AUTO_ZRELADDR. + */ + u32 ram_start = (u32)&uart_shift & 0xf8000000; + u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); + *uart_info = port; +} + +static void putc(int c) +{ + if (!uart_base) + return; + + /* Check for UART 16x mode */ + if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) + return; + + while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) + barrier(); + uart_base[UART_TX << uart_shift] = c; +} + +static inline void flush(void) +{ +} + +/* + * Macros to configure UART1 and debug UART + */ +#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ + if (machine_is_##mach()) { \ + uart_base = (volatile u8 *)(dbg_uart); \ + uart_shift = (dbg_shft); \ + port = (dbg_id); \ + set_omap_uart_info(port); \ + break; \ + } + +#define DEBUG_LL_OMAP7XX(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \ + OMAP1UART##p) + +#define DEBUG_LL_OMAP1(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP1UART##p) + +static inline void arch_decomp_setup(void) +{ + int port = 0; + + /* + * Initialize the port based on the machine ID from the bootloader. + * Note that we're using macros here instead of switch statement + * as machine_is functions are optimized out for the boards that + * are not selected. + */ + do { + /* omap7xx/8xx based boards using UART1 with shift 0 */ + DEBUG_LL_OMAP7XX(1, herald); + DEBUG_LL_OMAP7XX(1, omap_perseus2); + + /* omap15xx/16xx based boards using UART1 */ + DEBUG_LL_OMAP1(1, ams_delta); + DEBUG_LL_OMAP1(1, nokia770); + DEBUG_LL_OMAP1(1, omap_h2); + DEBUG_LL_OMAP1(1, omap_h3); + DEBUG_LL_OMAP1(1, omap_innovator); + DEBUG_LL_OMAP1(1, omap_osk); + DEBUG_LL_OMAP1(1, omap_palmte); + DEBUG_LL_OMAP1(1, omap_palmz71); + + /* omap15xx/16xx based boards using UART2 */ + DEBUG_LL_OMAP1(2, omap_palmtt); + + /* omap15xx/16xx based boards using UART3 */ + DEBUG_LL_OMAP1(3, sx1); + } while (0); +} + +/* + * nothing to do + */ +#define arch_decomp_wdog() |