diff options
Diffstat (limited to 'arch/arm/mach-omap1/serial.c')
| -rw-r--r-- | arch/arm/mach-omap1/serial.c | 56 |
1 files changed, 14 insertions, 42 deletions
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index d496e50fec4..6e5207c81cf 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -22,10 +22,10 @@ #include <asm/mach-types.h> -#include <mach/board.h> -#include <mach/mux.h> +#include <plat/board.h> +#include <plat/mux.h> #include <mach/gpio.h> -#include <mach/fpga.h> +#include <plat/fpga.h> static struct clk * uart1_ck; static struct clk * uart2_ck; @@ -64,7 +64,6 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p) static struct plat_serial8250_port serial_platform_data[] = { { - .membase = OMAP1_IO_ADDRESS(OMAP_UART1_BASE), .mapbase = OMAP_UART1_BASE, .irq = INT_UART1, .flags = UPF_BOOT_AUTOCONF, @@ -73,7 +72,6 @@ static struct plat_serial8250_port serial_platform_data[] = { .uartclk = OMAP16XX_BASE_BAUD * 16, }, { - .membase = OMAP1_IO_ADDRESS(OMAP_UART2_BASE), .mapbase = OMAP_UART2_BASE, .irq = INT_UART2, .flags = UPF_BOOT_AUTOCONF, @@ -82,7 +80,6 @@ static struct plat_serial8250_port serial_platform_data[] = { .uartclk = OMAP16XX_BASE_BAUD * 16, }, { - .membase = OMAP1_IO_ADDRESS(OMAP_UART3_BASE), .mapbase = OMAP_UART3_BASE, .irq = INT_UART3, .flags = UPF_BOOT_AUTOCONF, @@ -110,18 +107,11 @@ void __init omap_serial_init(void) { int i; - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { serial_platform_data[0].regshift = 0; serial_platform_data[1].regshift = 0; - serial_platform_data[0].irq = INT_730_UART_MODEM_1; - serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2; - } - - if (cpu_is_omap850()) { - serial_platform_data[0].regshift = 0; - serial_platform_data[1].regshift = 0; - serial_platform_data[0].irq = INT_850_UART_MODEM_1; - serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2; + serial_platform_data[0].irq = INT_7XX_UART_MODEM_1; + serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2; } if (cpu_is_omap15xx()) { @@ -130,9 +120,15 @@ void __init omap_serial_init(void) serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16; } - for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { - unsigned char reg; + for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) { + /* Static mapping, never released */ + serial_platform_data[i].membase = + ioremap(serial_platform_data[i].mapbase, SZ_2K); + if (!serial_platform_data[i].membase) { + printk(KERN_ERR "Could not ioremap uart%i\n", i); + continue; + } switch (i) { case 0: uart1_ck = clk_get(NULL, "uart1_ck"); @@ -143,16 +139,6 @@ void __init omap_serial_init(void) if (cpu_is_omap15xx()) clk_set_rate(uart1_ck, 12000000); } - if (cpu_is_omap15xx()) { - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - if (machine_is_omap_innovator()) { - reg = fpga_read(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM1_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); - udelay(10); - } - } break; case 1: uart2_ck = clk_get(NULL, "uart2_ck"); @@ -165,16 +151,6 @@ void __init omap_serial_init(void) else clk_set_rate(uart2_ck, 48000000); } - if (cpu_is_omap15xx()) { - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - if (machine_is_omap_innovator()) { - reg = fpga_read(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM2_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); - udelay(10); - } - } break; case 2: uart3_ck = clk_get(NULL, "uart3_ck"); @@ -185,10 +161,6 @@ void __init omap_serial_init(void) if (cpu_is_omap15xx()) clk_set_rate(uart3_ck, 12000000); } - if (cpu_is_omap15xx()) { - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - } break; } omap_serial_reset(&serial_platform_data[i]); |