diff options
Diffstat (limited to 'arch/arm/mach-omap1')
| -rw-r--r-- | arch/arm/mach-omap1/ams-delta-fiq-handler.S | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-osk.c | 6 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-palmz71.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-sx1.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-voiceblue.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/devices.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/fpga.c | 10 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/ams-delta-fiq.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/irq.c | 4 |
9 files changed, 22 insertions, 22 deletions
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index 927d5a18176..c1c5fb6a5b4 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -79,7 +79,7 @@ /* - * Register useage + * Register usage * r8 - temporary * r9 - the driver buffer * r10 - temporary diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 7c5e2112c77..e68dfde1918 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -276,7 +276,7 @@ static void __init osk_init_cf(void) return; } /* the CF I/O IRQ is really active-low */ - set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING); + irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING); } static void __init osk_init_irq(void) @@ -482,7 +482,7 @@ static void __init osk_mistral_init(void) omap_cfg_reg(P20_1610_GPIO4); /* PENIRQ */ gpio_request(4, "ts_int"); gpio_direction_input(4); - set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING); + irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING); spi_register_board_info(mistral_boardinfo, ARRAY_SIZE(mistral_boardinfo)); @@ -500,7 +500,7 @@ static void __init osk_mistral_init(void) int irq = gpio_to_irq(OMAP_MPUIO(2)); gpio_direction_input(OMAP_MPUIO(2)); - set_irq_type(irq, IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); #ifdef CONFIG_PM /* share the IRQ in case someone wants to use the * button for more than wakeup from system sleep. diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index d7bbbe721a7..45f01d2c3a7 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -256,12 +256,12 @@ palmz71_powercable(int irq, void *dev_id) { if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) { printk(KERN_INFO "PM: Power cable connected\n"); - set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO), - IRQ_TYPE_EDGE_FALLING); + irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO), + IRQ_TYPE_EDGE_FALLING); } else { printk(KERN_INFO "PM: Power cable disconnected\n"); - set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO), - IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO), + IRQ_TYPE_EDGE_RISING); } return IRQ_HANDLED; } diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index d41fe2d0616..0ad781db4e6 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -399,7 +399,7 @@ static void __init omap_sx1_init(void) sx1_mmc_init(); /* turn on USB power */ - /* sx1_setusbpower(1); cant do it here because i2c is not ready */ + /* sx1_setusbpower(1); can't do it here because i2c is not ready */ gpio_request(1, "A_IRDA_OFF"); gpio_request(11, "A_SWITCH"); gpio_request(15, "A_USB_ON"); diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index bdc0ac8dc21..65d24204937 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -279,10 +279,10 @@ static void __init voiceblue_init(void) gpio_request(13, "16C554 irq"); gpio_request(14, "16C554 irq"); gpio_request(15, "16C554 irq"); - set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING); platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); omap_board_config = voiceblue_config; diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index b0f4c231595..36f26c3fa25 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -281,7 +281,7 @@ static inline void omap_init_audio(void) {} * Claiming GPIOs, and setting their direction and initial values, is the * responsibility of the device drivers. So is responding to probe(). * - * Board-specific knowlege like creating devices or pin setup is to be + * Board-specific knowledge like creating devices or pin setup is to be * kept out of drivers as much as possible. In particular, pin setup * may be handled by the boot loader, and drivers should expect it will * normally have been done by the time they're probed. diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 0ace7998aaa..cddbf8b089c 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -156,17 +156,17 @@ void omap1510_fpga_init_irq(void) * The touchscreen interrupt is level-sensitive, so * we'll use the regular mask_ack routine for it. */ - set_irq_chip(i, &omap_fpga_irq_ack); + irq_set_chip(i, &omap_fpga_irq_ack); } else { /* * All FPGA interrupts except the touchscreen are * edge-sensitive, so we won't mask them. */ - set_irq_chip(i, &omap_fpga_irq); + irq_set_chip(i, &omap_fpga_irq); } - set_irq_handler(i, handle_edge_irq); + irq_set_handler(i, handle_edge_irq); set_irq_flags(i, IRQF_VALID); } @@ -183,6 +183,6 @@ void omap1510_fpga_init_irq(void) return; } gpio_direction_input(13); - set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); - set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux); + irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); + irq_set_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux); } diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h index 7a2df29400c..23eed0035ed 100644 --- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h +++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h @@ -31,7 +31,7 @@ #endif /* - * These are the offsets from the begining of the fiq_buffer. They are put here + * These are the offsets from the beginning of the fiq_buffer. They are put here * since the buffer and header need to be accessed by drivers servicing devices * which generate GPIO interrupts - e.g. keyboard, modem, hook switch. */ diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 731dd33bff5..5d3da7a63af 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -230,8 +230,8 @@ void __init omap_init_irq(void) irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j); omap_irq_set_cfg(j, 0, 0, irq_trigger); - set_irq_chip(j, &omap_irq_chip); - set_irq_handler(j, handle_level_irq); + irq_set_chip_and_handler(j, &omap_irq_chip, + handle_level_irq); set_irq_flags(j, IRQF_VALID); } } |