diff options
Diffstat (limited to 'arch/arm/mach-omap1')
26 files changed, 765 insertions, 366 deletions
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index b18d7c28ab7..3b02d3b944a 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -1,3 +1,7 @@ +if ARCH_OMAP1 + +menu "TI OMAP1 specific features" + comment "OMAP Core Type" depends on ARCH_OMAP1 @@ -224,6 +228,12 @@ config OMAP_ARM_120MHZ help Enable 120MHz clock for OMAP CPU. If unsure, say N. +config OMAP_ARM_96MHZ + bool "OMAP ARM 96 MHz CPU" + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) + help + Enable 96MHz clock for OMAP CPU. If unsure, say N. + config OMAP_ARM_60MHZ bool "OMAP ARM 60 MHz CPU" depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) @@ -237,3 +247,6 @@ config OMAP_ARM_30MHZ help Enable 30MHz clock for OMAP CPU. If unsure, say N. +endmenu + +endif diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index ea231c7a550..facfaeb1ae5 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -23,6 +23,9 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y) led-y := leds.o +usb-fs-$(CONFIG_USB) := usb.o +obj-y += $(usb-fs-m) $(usb-fs-y) + # Specific board support obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o board-h2-mmc.o obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 0a9d61d2d22..41992ab7196 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -235,7 +235,7 @@ static void __init ams_delta_init(void) /* Clear latch2 (NAND, LCD, modem enable) */ ams_delta_latch2_write(~0, 0); - omap_usb_init(&ams_delta_usb_config); + omap1_usb_init(&ams_delta_usb_config); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); #ifdef CONFIG_AMS_DELTA_FIQ diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 059bac60b35..180ce79e5ea 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -292,6 +292,18 @@ static void __init omap_fsample_init(void) omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); + /* Mux pins for keypad */ + omap_cfg_reg(E2_7XX_KBR0); + omap_cfg_reg(J7_7XX_KBR1); + omap_cfg_reg(E1_7XX_KBR2); + omap_cfg_reg(F3_7XX_KBR3); + omap_cfg_reg(D2_7XX_KBR4); + omap_cfg_reg(C2_7XX_KBC0); + omap_cfg_reg(D3_7XX_KBC1); + omap_cfg_reg(E4_7XX_KBC2); + omap_cfg_reg(F4_7XX_KBC3); + omap_cfg_reg(E3_7XX_KBC4); + platform_add_devices(devices, ARRAY_SIZE(devices)); omap_board_config = fsample_config; diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 7a65684d2a1..93b9ab8fc3b 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -72,12 +72,12 @@ static void __init omap_generic_init(void) omap_cfg_reg(UART3_TX); omap_cfg_reg(UART3_RX); - omap_usb_init(&generic1510_usb_config); + omap1_usb_init(&generic1510_usb_config); } #endif #if defined(CONFIG_ARCH_OMAP16XX) if (!cpu_is_omap1510()) { - omap_usb_init(&generic1610_usb_config); + omap1_usb_init(&generic1610_usb_config); } #endif diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 68b2beda8b9..d2cda58bcc4 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -292,15 +292,6 @@ static struct platform_device h2_kp_device = { #define H2_IRDA_FIRSEL_GPIO_PIN 17 -#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE) -static int h2_transceiver_mode(struct device *dev, int state) -{ - /* SIR when low, else MIR/FIR when HIGH */ - gpio_set_value(H2_IRDA_FIRSEL_GPIO_PIN, !(state & IR_SIRMODE)); - return 0; -} -#endif - static struct omap_irda_config h2_irda_data = { .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, .rx_channel = OMAP_DMA_UART3_RX, @@ -437,14 +428,18 @@ static void __init h2_init(void) /* omap_cfg_reg(U19_ARMIO1); */ /* CD */ omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */ - /* Irda */ -#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE) - omap_writel(omap_readl(FUNC_MUX_CTRL_A) | 7, FUNC_MUX_CTRL_A); - if (gpio_request(H2_IRDA_FIRSEL_GPIO_PIN, "IRDA mode") < 0) - BUG(); - gpio_direction_output(H2_IRDA_FIRSEL_GPIO_PIN, 0); - h2_irda_data.transceiver_mode = h2_transceiver_mode; -#endif + /* Mux pins for keypad */ + omap_cfg_reg(F18_1610_KBC0); + omap_cfg_reg(D20_1610_KBC1); + omap_cfg_reg(D19_1610_KBC2); + omap_cfg_reg(E18_1610_KBC3); + omap_cfg_reg(C21_1610_KBC4); + omap_cfg_reg(G18_1610_KBR0); + omap_cfg_reg(F19_1610_KBR1); + omap_cfg_reg(H14_1610_KBR2); + omap_cfg_reg(E20_1610_KBR3); + omap_cfg_reg(E19_1610_KBR4); + omap_cfg_reg(N19_1610_KBR5); platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); omap_board_config = h2_config; @@ -452,7 +447,7 @@ static void __init h2_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, h2_i2c_board_info, ARRAY_SIZE(h2_i2c_board_info)); - omap_usb_init(&h2_usb_config); + omap1_usb_init(&h2_usb_config); h2_mmc_init(); } diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 0b0825fe675..c2ef4ff846c 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -397,6 +397,19 @@ static void __init h3_init(void) /* GPIO10 pullup/down register, Enable pullup on GPIO10 */ omap_cfg_reg(V2_1710_GPIO10); + /* Mux pins for keypad */ + omap_cfg_reg(F18_1610_KBC0); + omap_cfg_reg(D20_1610_KBC1); + omap_cfg_reg(D19_1610_KBC2); + omap_cfg_reg(E18_1610_KBC3); + omap_cfg_reg(C21_1610_KBC4); + omap_cfg_reg(G18_1610_KBR0); + omap_cfg_reg(F19_1610_KBR1); + omap_cfg_reg(H14_1610_KBR2); + omap_cfg_reg(E20_1610_KBR3); + omap_cfg_reg(E19_1610_KBR4); + omap_cfg_reg(N19_1610_KBR5); + platform_add_devices(devices, ARRAY_SIZE(devices)); spi_register_board_info(h3_spi_board_info, ARRAY_SIZE(h3_spi_board_info)); @@ -405,7 +418,7 @@ static void __init h3_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, h3_i2c_board_info, ARRAY_SIZE(h3_i2c_board_info)); - omap_usb_init(&h3_usb_config); + omap1_usb_init(&h3_usb_config); h3_mmc_init(); } diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index d70a4f0923f..311899ff5ff 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -287,7 +287,7 @@ static void __init htcherald_init(void) htcherald_disable_watchdog(); htcherald_usb_enable(); - omap_usb_init(&htcherald_usb_config); + omap1_usb_init(&htcherald_usb_config); } static void __init htcherald_init_irq(void) diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 91064b37859..3daf87ad257 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -422,13 +422,13 @@ static void __init innovator_init(void) #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { - omap_usb_init(&innovator1510_usb_config); + omap1_usb_init(&innovator1510_usb_config); innovator_config[1].data = &innovator1510_lcd_config; } #endif #ifdef CONFIG_ARCH_OMAP16XX if (cpu_is_omap1610()) { - omap_usb_init(&h2_usb_config); + omap1_usb_init(&h2_usb_config); innovator_config[1].data = &innovator1610_lcd_config; } #endif diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 8c28b10f3da..51a4539aecf 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -32,7 +32,6 @@ #include <plat/board.h> #include <plat/keypad.h> #include <plat/common.h> -#include <plat/dsp_common.h> #include <plat/hwa742.h> #include <plat/lcd_mipid.h> #include <plat/mmc.h> @@ -242,138 +241,6 @@ static inline void nokia770_mmc_init(void) } #endif -#if defined(CONFIG_OMAP_DSP) -/* - * audio power control - */ -#define HEADPHONE_GPIO 14 -#define AMPLIFIER_CTRL_GPIO 58 - -static struct clk *dspxor_ck; -static DEFINE_MUTEX(audio_pwr_lock); -/* - * audio_pwr_state - * +--+-------------------------+---------------------------------------+ - * |-1|down |power-up request -> 0 | - * +--+-------------------------+---------------------------------------+ - * | 0|up |power-down(1) request -> 1 | - * | | |power-down(2) request -> (ignore) | - * +--+-------------------------+---------------------------------------+ - * | 1|up, |power-up request -> 0 | - * | |received down(1) request |power-down(2) request -> -1 | - * +--+-------------------------+---------------------------------------+ - */ -static int audio_pwr_state = -1; - -static inline void aic23_power_up(void) -{ -} -static inline void aic23_power_down(void) -{ -} - -/* - * audio_pwr_up / down should be called under audio_pwr_lock - */ -static void nokia770_audio_pwr_up(void) -{ - clk_enable(dspxor_ck); - - /* Turn on codec */ - aic23_power_up(); - - if (gpio_get_value(HEADPHONE_GPIO)) - /* HP not connected, turn on amplifier */ - gpio_set_value(AMPLIFIER_CTRL_GPIO, 1); - else - /* HP connected, do not turn on amplifier */ - printk("HP connected\n"); -} - -static void codec_delayed_power_down(struct work_struct *work) -{ - mutex_lock(&audio_pwr_lock); - if (audio_pwr_state == -1) - aic23_power_down(); - clk_disable(dspxor_ck); - mutex_unlock(&audio_pwr_lock); -} - -static DECLARE_DELAYED_WORK(codec_power_down_work, codec_delayed_power_down); - -static void nokia770_audio_pwr_down(void) -{ - /* Turn off amplifier */ - gpio_set_value(AMPLIFIER_CTRL_GPIO, 0); - - /* Turn off codec: schedule delayed work */ - schedule_delayed_work(&codec_power_down_work, HZ / 20); /* 50ms */ -} - -static int -nokia770_audio_pwr_up_request(struct dsp_kfunc_device *kdev, int stage) -{ - mutex_lock(&audio_pwr_lock); - if (audio_pwr_state == -1) - nokia770_audio_pwr_up(); - /* force audio_pwr_state = 0, even if it was 1. */ - audio_pwr_state = 0; - mutex_unlock(&audio_pwr_lock); - return 0; -} - -static int -nokia770_audio_pwr_down_request(struct dsp_kfunc_device *kdev, int stage) -{ - mutex_lock(&audio_pwr_lock); - switch (stage) { - case 1: - if (audio_pwr_state == 0) - audio_pwr_state = 1; - break; - case 2: - if (audio_pwr_state == 1) { - nokia770_audio_pwr_down(); - audio_pwr_state = -1; - } - break; - } - mutex_unlock(&audio_pwr_lock); - return 0; -} - -static struct dsp_kfunc_device nokia770_audio_device = { - .name = "audio", - .type = DSP_KFUNC_DEV_TYPE_AUDIO, - .enable = nokia770_audio_pwr_up_request, - .disable = nokia770_audio_pwr_down_request, -}; - -static __init int omap_dsp_init(void) -{ - int ret; - - dspxor_ck = clk_get(0, "dspxor_ck"); - if (IS_ERR(dspxor_ck)) { - printk(KERN_ERR "couldn't acquire dspxor_ck\n"); - return PTR_ERR(dspxor_ck); - } - - ret = dsp_kfunc_device_register(&nokia770_audio_device); - if (ret) { - printk(KERN_ERR - "KFUNC device registration faild: %s\n", - nokia770_audio_device.name); - goto out; - } - return 0; - out: - return ret; -} -#else -#define omap_dsp_init() do {} while (0) -#endif /* CONFIG_OMAP_DSP */ - static void __init omap_nokia770_init(void) { platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices)); @@ -382,11 +249,10 @@ static void __init omap_nokia770_init(void) omap_gpio_init(); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); - omap_dsp_init(); hwa742_dev_init(); ads7846_dev_init(); mipid_dev_init(); - omap_usb_init(&nokia770_usb_config); + omap1_usb_init(&nokia770_usb_config); nokia770_mmc_init(); } diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index e2a72af3089..679740cc1e9 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -560,7 +560,7 @@ static void __init osk_init(void) l |= (3 << 1); omap_writel(l, USB_TRANSCEIVER_CTRL); - omap_usb_init(&osk_usb_config); + omap1_usb_init(&osk_usb_config); /* irq for tps65010 chip */ /* bootloader effectively does: omap_cfg_reg(U19_1610_MPUIO1); */ diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 61a2321b973..782bb257a85 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -213,90 +213,6 @@ static struct omap_lcd_config palmte_lcd_config __initdata = { .ctrl_name = "internal", }; -#ifdef CONFIG_APM -/* - * Values measured in 10 minute intervals averaged over 10 samples. - * May differ slightly from device to device but should be accurate - * enough to give basic idea of battery life left and trigger - * potential alerts. - */ -static const int palmte_battery_sample[] = { - 2194, 2157, 2138, 2120, - 2104, 2089, 2075, 2061, - 2048, 2038, 2026, 2016, - 2008, 1998, 1989, 1980, - 1970, 1958, 1945, 1928, - 1910, 1888, 1860, 1827, - 1791, 1751, 1709, 1656, -}; - -#define INTERVAL 10 -#define BATTERY_HIGH_TRESHOLD 66 -#define BATTERY_LOW_TRESHOLD 33 - -static void palmte_get_power_status(struct apm_power_info *info, int *battery) -{ - int charging, batt, hi, lo, mid; - - charging = !gpio_get_value(PALMTE_DC_GPIO); - batt = battery[0]; - if (charging) - batt -= 60; - - hi = ARRAY_SIZE(palmte_battery_sample); - lo = 0; - - info->battery_flag = 0; - info->units = APM_UNITS_MINS; - - if (batt > palmte_battery_sample[lo]) { - info->battery_life = 100; - info->time = INTERVAL * ARRAY_SIZE(palmte_battery_sample); - } else if (batt <= palmte_battery_sample[hi - 1]) { - info->battery_life = 0; - info->time = 0; - } else { - while (hi > lo + 1) { - mid = (hi + lo) >> 1; - if (batt <= palmte_battery_sample[mid]) - lo = mid; - else - hi = mid; - } - - mid = palmte_battery_sample[lo] - palmte_battery_sample[hi]; - hi = palmte_battery_sample[lo] - batt; - info->battery_life = 100 - (100 * lo + 100 * hi / mid) / - ARRAY_SIZE(palmte_battery_sample); - info->time = INTERVAL * (ARRAY_SIZE(palmte_battery_sample) - - lo) - INTERVAL * hi / mid; - } - - if (charging) { - info->ac_line_status = APM_AC_ONLINE; - info->battery_status = APM_BATTERY_STATUS_CHARGING; - info->battery_flag |= APM_BATTERY_FLAG_CHARGING; - } else { - info->ac_line_status = APM_AC_OFFLINE; - if (info->battery_life > BATTERY_HIGH_TRESHOLD) - info->battery_status = APM_BATTERY_STATUS_HIGH; - else if (info->battery_life > BATTERY_LOW_TRESHOLD) - info->battery_status = APM_BATTERY_STATUS_LOW; - else - info->battery_status = APM_BATTERY_STATUS_CRITICAL; - } - - if (info->battery_life > BATTERY_HIGH_TRESHOLD) - info->battery_flag |= APM_BATTERY_FLAG_HIGH; - else if (info->battery_life > BATTERY_LOW_TRESHOLD) - info->battery_flag |= APM_BATTERY_FLAG_LOW; - else - info->battery_flag |= APM_BATTERY_FLAG_CRITICAL; -} -#else -#define palmte_get_power_status NULL -#endif - static struct omap_board_config_kernel palmte_config[] __initdata = { { OMAP_TAG_LCD, &palmte_lcd_config }, }; @@ -359,7 +275,7 @@ static void __init omap_palmte_init(void) spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info)); palmte_misc_gpio_setup(); omap_serial_init(); - omap_usb_init(&palmte_usb_config); + omap1_usb_init(&palmte_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); } diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 21c01c6afcc..0b35ef54a64 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -307,7 +307,7 @@ static void __init omap_palmtt_init(void) spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo)); omap_serial_init(); - omap_usb_init(&palmtt_usb_config); + omap1_usb_init(&palmtt_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); } diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index f3249245153..66362903b6e 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -325,7 +325,7 @@ omap_palmz71_init(void) spi_register_board_info(palmz71_boardinfo, ARRAY_SIZE(palmz71_boardinfo)); - omap_usb_init(&palmz71_usb_config); + omap1_usb_init(&palmz71_usb_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); palmz71_gpio_setup(0); diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 8b5ab1fcc40..34ab354758b 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -260,6 +260,18 @@ static void __init omap_perseus2_init(void) omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); + /* Mux pins for keypad */ + omap_cfg_reg(E2_7XX_KBR0); + omap_cfg_reg(J7_7XX_KBR1); + omap_cfg_reg(E1_7XX_KBR2); + omap_cfg_reg(F3_7XX_KBR3); + omap_cfg_reg(D2_7XX_KBR4); + omap_cfg_reg(C2_7XX_KBC0); + omap_cfg_reg(D3_7XX_KBC1); + omap_cfg_reg(E4_7XX_KBC2); + omap_cfg_reg(F4_7XX_KBC3); + omap_cfg_reg(E3_7XX_KBC4); + platform_add_devices(devices, ARRAY_SIZE(devices)); omap_board_config = perseus2_config; diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 995566b862b..2eb148b8de9 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -392,7 +392,7 @@ static void __init omap_sx1_init(void) omap_board_config_size = ARRAY_SIZE(sx1_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); - omap_usb_init(&sx1_usb_config); + omap1_usb_init(&sx1_usb_config); sx1_mmc_init(); /* turn on USB power */ diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 4c483dc1de5..6b3cf14bc75 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -198,7 +198,7 @@ static void __init voiceblue_init(void) omap_board_config = voiceblue_config; omap_board_config_size = ARRAY_SIZE(voiceblue_config); omap_serial_init(); - omap_usb_init(&voiceblue_usb_config); + omap1_usb_init(&voiceblue_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); /* There is a good chance board is going up, so enable power LED diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 6bbb1b8b829..b8c7fb9d792 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -11,7 +11,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <linux/module.h> #include <linux/kernel.h> #include <linux/list.h> #include <linux/errno.h> @@ -34,9 +33,9 @@ __u32 arm_idlect1_mask; struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; -/*------------------------------------------------------------------------- +/* * Omap1 specific clock functions - *-------------------------------------------------------------------------*/ + */ unsigned long omap1_uart_recalc(struct clk *clk) { @@ -523,7 +522,8 @@ const struct clkops clkops_dspck = { .disable = omap1_clk_disable_dsp_domain, }; -static int omap1_clk_enable_uart_functional(struct clk *clk) +/* XXX SYSC register handling does not belong in the clock framework */ +static int omap1_clk_enable_uart_functional_16xx(struct clk *clk) { int ret; struct uart_clk *uclk; @@ -539,7 +539,8 @@ static int omap1_clk_enable_uart_functional(struct clk *clk) return ret; } -static void omap1_clk_disable_uart_functional(struct clk *clk) +/* XXX SYSC register handling does not belong in the clock framework */ +static void omap1_clk_disable_uart_functional_16xx(struct clk *clk) { struct uart_clk *uclk; @@ -550,9 +551,10 @@ static void omap1_clk_disable_uart_functional(struct clk *clk) omap1_clk_disable_generic(clk); } -const struct clkops clkops_uart = { - .enable = omap1_clk_enable_uart_functional, - .disable = omap1_clk_disable_uart_functional, +/* XXX SYSC register handling does not belong in the clock framework */ +const struct clkops clkops_uart_16xx = { + .enable = omap1_clk_enable_uart_functional_16xx, + .disable = omap1_clk_disable_uart_functional_16xx, }; long omap1_clk_round_rate(struct clk *clk, unsigned long rate) @@ -572,9 +574,9 @@ int omap1_clk_set_rate(struct clk *clk, unsigned long rate) return ret; } -/*------------------------------------------------------------------------- +/* * Omap1 clock reset and init functions - *-------------------------------------------------------------------------*/ + */ #ifdef CONFIG_OMAP_RESET_CLOCKS diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 75d0d7d90bf..eaf09efb91c 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -107,7 +107,7 @@ extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; extern const struct clkops clkops_dspck; extern const struct clkops clkops_dummy; -extern const struct clkops clkops_uart; +extern const struct clkops clkops_uart_16xx; extern const struct clkops clkops_generic; #endif diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index aa8558adbf1..af54114b8f0 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -8,6 +8,10 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. + * + * To do: + * - Clocks that are only available on some chips should be marked with the + * chips that they are present on. */ #include <linux/kernel.h> @@ -23,9 +27,49 @@ #include "clock.h" -/*------------------------------------------------------------------------ +/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */ +#define IDL_CLKOUT_ARM_SHIFT 12 +#define IDLTIM_ARM_SHIFT 9 +#define IDLAPI_ARM_SHIFT 8 +#define IDLIF_ARM_SHIFT 6 +#define IDLLB_ARM_SHIFT 4 /* undocumented? */ +#define OMAP1510_IDLLCD_ARM_SHIFT 3 /* undocumented? */ +#define IDLPER_ARM_SHIFT 2 +#define IDLXORP_ARM_SHIFT 1 +#define IDLWDT_ARM_SHIFT 0 + +/* Some MOD_CONF_CTRL_0 bit shifts - used in struct clk.enable_bit */ +#define CONF_MOD_UART3_CLK_MODE_R 31 +#define CONF_MOD_UART2_CLK_MODE_R 30 +#define CONF_MOD_UART1_CLK_MODE_R 29 +#define CONF_MOD_MMC_SD_CLK_REQ_R 23 +#define CONF_MOD_MCBSP3_AUXON 20 + +/* Some MOD_CONF_CTRL_1 bit shifts - used in struct clk.enable_bit */ +#define CONF_MOD_SOSSI_CLK_EN_R 16 + +/* Some OTG_SYSCON_2-specific bit fields */ +#define OTG_SYSCON_2_UHOST_EN_SHIFT 8 + +/* Some SOFT_REQ_REG bit fields - used in struct clk.enable_bit */ +#define SOFT_MMC2_DPLL_REQ_SHIFT 13 +#define SOFT_MMC_DPLL_REQ_SHIFT 12 +#define SOFT_UART3_DPLL_REQ_SHIFT 11 +#define SOFT_UART2_DPLL_REQ_SHIFT 10 +#define SOFT_UART1_DPLL_REQ_SHIFT 9 +#define SOFT_USB_OTG_DPLL_REQ_SHIFT 8 +#define SOFT_CAM_DPLL_REQ_SHIFT 7 +#define SOFT_COM_MCKO_REQ_SHIFT 6 +#define SOFT_PERIPH_REQ_SHIFT 5 /* sys_ck gate for UART2 ? */ +#define USB_REQ_EN_SHIFT 4 +#define SOFT_USB_REQ_SHIFT 3 /* sys_ck gate for USB host? */ +#define SOFT_SDW_REQ_SHIFT 2 /* sys_ck gate for Bluetooth? */ +#define SOFT_COM_REQ_SHIFT 1 /* sys_ck gate for com proc? */ +#define SOFT_DPLL_REQ_SHIFT 0 + +/* * Omap1 clocks - *-------------------------------------------------------------------------*/ + */ static struct clk ck_ref = { .name = "ck_ref", @@ -54,7 +98,7 @@ static struct arm_idlect1_clk ck_dpll1out = { .enable_bit = EN_CKOUT_ARM, .recalc = &followparent_recalc, }, - .idlect_shift = 12, + .idlect_shift = IDL_CLKOUT_ARM_SHIFT, }; static struct clk sossi_ck = { @@ -63,7 +107,7 @@ static struct clk sossi_ck = { .parent = &ck_dpll1out.clk, .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1), - .enable_bit = 16, + .enable_bit = CONF_MOD_SOSSI_CLK_EN_R, .recalc = &omap1_sossi_recalc, .set_rate = &omap1_set_sossi_rate, }; @@ -91,7 +135,7 @@ static struct arm_idlect1_clk armper_ck = { .round_rate = omap1_clk_round_rate_ckctl_arm, .set_rate = omap1_clk_set_rate_ckctl_arm, }, - .idlect_shift = 2, + .idlect_shift = IDLPER_ARM_SHIFT, }; /* @@ -118,7 +162,7 @@ static struct arm_idlect1_clk armxor_ck = { .enable_bit = EN_XORPCK, .recalc = &followparent_recalc, }, - .idlect_shift = 1, + .idlect_shift = IDLXORP_ARM_SHIFT, }; static struct arm_idlect1_clk armtim_ck = { @@ -131,7 +175,7 @@ static struct arm_idlect1_clk armtim_ck = { .enable_bit = EN_TIMCK, .recalc = &followparent_recalc, }, - .idlect_shift = 9, + .idlect_shift = IDLTIM_ARM_SHIFT, }; static struct arm_idlect1_clk armwdt_ck = { @@ -145,7 +189,7 @@ static struct arm_idlect1_clk armwdt_ck = { .fixed_div = 14, .recalc = &omap_fixed_divisor_recalc, }, - .idlect_shift = 0, + .idlect_shift = IDLWDT_ARM_SHIFT, }; static struct clk arminth_ck16xx = { @@ -212,7 +256,6 @@ static struct clk dsptim_ck = { .recalc = &followparent_recalc, }; -/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */ static struct arm_idlect1_clk tc_ck = { .clk = { .name = "tc_ck", @@ -224,7 +267,7 @@ static struct arm_idlect1_clk tc_ck = { .round_rate = omap1_clk_round_rate_ckctl_arm, .set_rate = omap1_clk_set_rate_ckctl_arm, }, - .idlect_shift = 6, + .idlect_shift = IDLIF_ARM_SHIFT, }; static struct clk arminth_ck1510 = { @@ -304,7 +347,7 @@ static struct arm_idlect1_clk api_ck = { .enable_bit = EN_APICK, .recalc = &followparent_recalc, }, - .idlect_shift = 8, + .idlect_shift = IDLAPI_ARM_SHIFT, }; static struct arm_idlect1_clk lb_ck = { @@ -317,7 +360,7 @@ static struct arm_idlect1_clk lb_ck = { .enable_bit = EN_LBCK, .recalc = &followparent_recalc, }, - .idlect_shift = 4, + .idlect_shift = IDLLB_ARM_SHIFT, }; static struct clk rhea1_ck = { @@ -359,9 +402,15 @@ static struct arm_idlect1_clk lcd_ck_1510 = { .round_rate = omap1_clk_round_rate_ckctl_arm, .set_rate = omap1_clk_set_rate_ckctl_arm, }, - .idlect_shift = 3, + .idlect_shift = OMAP1510_IDLLCD_ARM_SHIFT, }; +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX does this need SYSC register handling? + */ static struct clk uart1_1510 = { .name = "uart1_ck", .ops = &clkops_null, @@ -370,25 +419,37 @@ static struct clk uart1_1510 = { .rate = 12000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ + .enable_bit = CONF_MOD_UART1_CLK_MODE_R, .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, }; +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX SYSC register handling does not belong in the clock framework + */ static struct uart_clk uart1_16xx = { .clk = { .name = "uart1_ck", - .ops = &clkops_uart, + .ops = &clkops_uart_16xx, /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 29, + .enable_bit = CONF_MOD_UART1_CLK_MODE_R, }, .sysc_addr = 0xfffb0054, }; +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX does this need SYSC register handling? + */ static struct clk uart2_ck = { .name = "uart2_ck", .ops = &clkops_null, @@ -397,11 +458,17 @@ static struct clk uart2_ck = { .rate = 12000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ + .enable_bit = CONF_MOD_UART2_CLK_MODE_R, .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, }; +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX does this need SYSC register handling? + */ static struct clk uart3_1510 = { .name = "uart3_ck", .ops = &clkops_null, @@ -410,21 +477,27 @@ static struct clk uart3_1510 = { .rate = 12000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ + .enable_bit = CONF_MOD_UART3_CLK_MODE_R, .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, }; +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX SYSC register handling does not belong in the clock framework + */ static struct uart_clk uart3_16xx = { .clk = { .name = "uart3_ck", - .ops = &clkops_uart, + .ops = &clkops_uart_16xx, /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 31, + .enable_bit = CONF_MOD_UART3_CLK_MODE_R, }, .sysc_addr = 0xfffb9854, }; @@ -457,7 +530,7 @@ static struct clk usb_hhc_ck16xx = { /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ .flags = ENABLE_REG_32BIT, .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */ - .enable_bit = 8 /* UHOST_EN */, + .enable_bit = OTG_SYSCON_2_UHOST_EN_SHIFT }; static struct clk usb_dc_ck = { @@ -466,7 +539,7 @@ static struct clk usb_dc_ck = { /* Direct from ULPD, no parent */ .rate = 48000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 4, + .enable_bit = USB_REQ_EN_SHIFT, }; static struct clk usb_dc_ck7xx = { @@ -475,7 +548,25 @@ static struct clk usb_dc_ck7xx = { /* Direct from ULPD, no parent */ .rate = 48000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 8, + .enable_bit = SOFT_USB_OTG_DPLL_REQ_SHIFT, +}; + +static struct clk uart1_7xx = { + .name = "uart1_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 12000000, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 9, +}; + +static struct clk uart2_7xx = { + .name = "uart2_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 12000000, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 11, }; static struct clk mclk_1510 = { @@ -484,7 +575,7 @@ static struct clk mclk_1510 = { /* Direct from ULPD, no parent. May be enabled by ext hardware. */ .rate = 12000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 6, + .enable_bit = SOFT_COM_MCKO_REQ_SHIFT, }; static struct clk mclk_16xx = { @@ -524,9 +615,13 @@ static struct clk mmc1_ck = { .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 23, + .enable_bit = CONF_MOD_MMC_SD_CLK_REQ_R, }; +/* + * XXX MOD_CONF_CTRL_0 bit 20 is defined in the 1510 TRM as + * CONF_MOD_MCBSP3_AUXON ?? + */ static struct clk mmc2_ck = { .name = "mmc2_ck", .ops = &clkops_generic, @@ -546,7 +641,7 @@ static struct clk mmc3_ck = { .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 12, + .enable_bit = SOFT_MMC_DPLL_REQ_SHIFT, }; static struct clk virtual_ck_mpu = { @@ -620,7 +715,9 @@ static struct omap_clk omap_clks[] = { /* ULPD clocks */ CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX), + CLK(NULL, "uart1_ck", &uart1_7xx, CK_7XX), CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "uart2_ck", &uart2_7xx, CK_7XX), CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310), CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX), CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 379100c1763..aa0725608fb 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -63,44 +63,7 @@ static void omap_init_rtc(void) static inline void omap_init_rtc(void) {} #endif -#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE) - -#if defined(CONFIG_ARCH_OMAP15XX) -# define OMAP1_MBOX_SIZE 0x23 -# define INT_DSP_MAILBOX1 INT_1510_DSP_MAILBOX1 -#elif defined(CONFIG_ARCH_OMAP16XX) -# define OMAP1_MBOX_SIZE 0x2f -# define INT_DSP_MAILBOX1 INT_1610_DSP_MAILBOX1 -#endif - -#define OMAP1_MBOX_BASE OMAP16XX_MAILBOX_BASE - -static struct resource mbox_resources[] = { - { - .start = OMAP1_MBOX_BASE, - .end = OMAP1_MBOX_BASE + OMAP1_MBOX_SIZE, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_DSP_MAILBOX1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mbox_device = { - .name = "omap1-mailbox", - .id = -1, - .num_resources = ARRAY_SIZE(mbox_resources), - .resource = mbox_resources, -}; - -static inline void omap_init_mbox(void) -{ - platform_device_register(&mbox_device); -} -#else static inline void omap_init_mbox(void) { } -#endif /*-------------------------------------------------------------------------*/ @@ -230,42 +193,7 @@ static inline void omap_init_spi100k(void) /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_OMAP_STI) - -#define OMAP1_STI_BASE 0xfffea000 -#define OMAP1_STI_CHANNEL_BASE (OMAP1_STI_BASE + 0x400) - -static struct resource sti_resources[] = { - { - .start = OMAP1_STI_BASE, - .end = OMAP1_STI_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP1_STI_CHANNEL_BASE, - .end = OMAP1_STI_CHANNEL_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_1610_STI, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device sti_device = { - .name = "sti", - .id = -1, - .num_resources = ARRAY_SIZE(sti_resources), - .resource = sti_resources, -}; - -static inline void omap_init_sti(void) -{ - platform_device_register(&sti_device); -} -#else static inline void omap_init_sti(void) {} -#endif /*-------------------------------------------------------------------------*/ diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S index e8a8cf36b7f..671408eb4ab 100644 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -33,7 +33,7 @@ omap_uart_virt: .word 0x0 /* Use omap_uart_phys/virt if already configured */ 9: mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? - ldreq \rx, =omap_uart_phys @ physical base address + ldreq \rx, =__virt_to_phys(omap_uart_phys) @ physical base address ldrne \rx, =omap_uart_virt @ virtual base ldr \rx, [\rx, #0] cmp \rx, #0 @ is port configured? @@ -68,11 +68,15 @@ omap_uart_virt: .word 0x0 /* Store both phys and virt address for the uart */ 98: add \rx, \rx, #0xff000000 @ phys base - ldr \tmp, =omap_uart_phys + mrc p15, 0, \tmp, c1, c0 + tst \tmp, #1 @ MMU enabled? + ldreq \tmp, =__virt_to_phys(omap_uart_phys) + ldrne \tmp, =omap_uart_phys str \rx, [\tmp, #0] sub \rx, \rx, #0xff000000 @ phys base add \rx, \rx, #0xfe000000 @ virt base - ldr \tmp, =omap_uart_virt + ldreq \tmp, =__virt_to_phys(omap_uart_virt) + ldrne \tmp, =omap_uart_virt str \rx, [\tmp, #0] b 9b 99: diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index e9bdff192f8..b3a796a6da0 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -23,7 +23,6 @@ #include <plat/mux.h> #include <plat/cpu.h> #include <plat/mcbsp.h> -#include <plat/dsp_common.h> #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) @@ -46,7 +45,6 @@ static void omap1_mcbsp_request(unsigned int id) clk_enable(api_clk); clk_enable(dsp_clk); - omap_dsp_request_mem(); /* * DSP external peripheral reset * FIXME: This should be moved to dsp code @@ -62,7 +60,6 @@ static void omap1_mcbsp_free(unsigned int id) { if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) { if (--dsp_use == 0) { - omap_dsp_release_mem(); if (!IS_ERR(api_clk)) { clk_disable(api_clk); clk_put(api_clk); diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 84341377232..7835add0034 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -70,6 +70,10 @@ MUX_CFG_7XX("SPI_7XX_3", 6, 13, 4, 12, 1, 0) MUX_CFG_7XX("SPI_7XX_4", 6, 17, 4, 16, 1, 0) MUX_CFG_7XX("SPI_7XX_5", 8, 25, 0, 24, 0, 0) MUX_CFG_7XX("SPI_7XX_6", 9, 5, 0, 4, 0, 0) + +/* UART pins */ +MUX_CFG_7XX("UART_7XX_1", 3, 21, 0, 20, 0, 0) +MUX_CFG_7XX("UART_7XX_2", 8, 1, 6, 0, 0, 0) }; #define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) #else @@ -440,7 +444,7 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) } #endif -#ifdef CONFIG_OMAP_MUX_ERRORS +#ifdef CONFIG_OMAP_MUX_WARNINGS return warn ? -ETXTBSY : 0; #else return 0; diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 349de90194e..b78d0749f13 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -122,6 +122,13 @@ void __init omap_serial_init(void) for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) { + /* Don't look at UARTs higher than 2 for omap7xx */ + if (cpu_is_omap7xx() && i > 1) { + serial_platform_data[i].membase = NULL; + serial_platform_data[i].mapbase = 0; + continue; + } + /* Static mapping, never released */ serial_platform_data[i].membase = ioremap(serial_platform_data[i].mapbase, SZ_2K); diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c new file mode 100644 index 00000000000..19de03b074e --- /dev/null +++ b/arch/arm/mach-omap1/usb.c @@ -0,0 +1,530 @@ +/* + * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx + * + * Copyright (C) 2004 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <asm/irq.h> + +#include <plat/mux.h> +#include <plat/usb.h> + +/* These routines should handle the standard chip-specific modes + * for usb0/1/2 ports, covering basic mux and transceiver setup. + * + * Some board-*.c files will need to set up additional mux options, + * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup. + */ + +/* TESTED ON: + * - 1611B H2 (with usb1 mini-AB) using standard Mini-B or OTG cables + * - 5912 OSK OHCI (with usb0 standard-A), standard A-to-B cables + * - 5912 OSK UDC, with *nonstandard* A-to-A cable + * - 1510 Innovator UDC with bundled usb0 cable + * - 1510 Innovator OHCI with bundled usb1/usb2 cable + * - 1510 Innovator OHCI with custom usb0 cable, feeding 5V VBUS + * - 1710 custom development board using alternate pin group + * - 1710 H3 (with usb1 mini-AB) using standard Mini-B or OTG cables + */ + +#define INT_USB_IRQ_GEN IH2_BASE + 20 +#define INT_USB_IRQ_NISO IH2_BASE + 30 +#define INT_USB_IRQ_ISO IH2_BASE + 29 +#define INT_USB_IRQ_HGEN INT_USB_HHC_1 +#define INT_USB_IRQ_OTG IH2_BASE + 8 + +#ifdef CONFIG_USB_GADGET_OMAP + +static struct resource udc_resources[] = { + /* order is significant! */ + { /* registers */ + .start = UDC_BASE, + .end = UDC_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, { /* general IRQ */ + .start = INT_USB_IRQ_GEN, + .flags = IORESOURCE_IRQ, + }, { /* PIO IRQ */ + .start = INT_USB_IRQ_NISO, + .flags = IORESOURCE_IRQ, + }, { /* SOF IRQ */ + .start = INT_USB_IRQ_ISO, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 udc_dmamask = ~(u32)0; + +static struct platform_device udc_device = { + .name = "omap_udc", + .id = -1, + .dev = { + .dma_mask = &udc_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(udc_resources), + .resource = udc_resources, +}; + +static inline void udc_device_init(struct omap_usb_config *pdata) +{ + /* IRQ numbers for omap7xx */ + if(cpu_is_omap7xx()) { + udc_resources[1].start = INT_7XX_USB_GENI; + udc_resources[2].start = INT_7XX_USB_NON_ISO; + udc_resources[3].start = INT_7XX_USB_ISO; + } + pdata->udc_device = &udc_device; +} + +#else + +static inline void udc_device_init(struct omap_usb_config *pdata) +{ +} + +#endif + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + +/* The dmamask must be set for OHCI to work */ +static u64 ohci_dmamask = ~(u32)0; + +static struct resource ohci_resources[] = { + { + .start = OMAP_OHCI_BASE, + .end = OMAP_OHCI_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_USB_IRQ_HGEN, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ohci_device = { + .name = "ohci", + .id = -1, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(ohci_resources), + .resource = ohci_resources, +}; + +static inline void ohci_device_init(struct omap_usb_config *pdata) +{ + if (cpu_is_omap7xx()) + ohci_resources[1].start = INT_7XX_USB_HHC_1; + pdata->ohci_device = &ohci_device; +} + +#else + +static inline void ohci_device_init(struct omap_usb_config *pdata) +{ +} + +#endif + +#if defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG) + +static struct resource otg_resources[] = { + /* order is significant! */ + { + .start = OTG_BASE, + .end = OTG_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, { + .start = INT_USB_IRQ_OTG, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device otg_device = { + .name = "omap_otg", + .id = -1, + .num_resources = ARRAY_SIZE(otg_resources), + .resource = otg_resources, +}; + +static inline void otg_device_init(struct omap_usb_config *pdata) +{ + if (cpu_is_omap7xx()) + otg_resources[1].start = INT_7XX_USB_OTG; + pdata->otg_device = &otg_device; +} + +#else + +static inline void otg_device_init(struct omap_usb_config *pdata) +{ +} + +#endif + +u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) +{ + u32 syscon1 = 0; + + if (nwires == 0) { + if (!cpu_is_omap15xx()) { + u32 l; + + /* pulldown D+/D- */ + l = omap_readl(USB_TRANSCEIVER_CTRL); + l &= ~(3 << 1); + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + return 0; + } + + if (is_device) { + if (cpu_is_omap7xx()) { + omap_cfg_reg(AA17_7XX_USB_DM); + omap_cfg_reg(W16_7XX_USB_PU_EN); + omap_cfg_reg(W17_7XX_USB_VBUSI); + omap_cfg_reg(W18_7XX_USB_DMCK_OUT); + omap_cfg_reg(W19_7XX_USB_DCRST); + } else + omap_cfg_reg(W4_USB_PUEN); + } + + if (nwires == 2) { + u32 l; + + // omap_cfg_reg(P9_USB_DP); + // omap_cfg_reg(R8_USB_DM); + + if (cpu_is_omap15xx()) { + /* This works on 1510-Innovator */ + return 0; + } + + /* NOTES: + * - peripheral should configure VBUS detection! + * - only peripherals may use the internal D+/D- pulldowns + * - OTG support on this port not yet written + */ + + /* Don't do this for omap7xx -- it causes USB to not work correctly */ + if (!cpu_is_omap7xx()) { + l = omap_readl(USB_TRANSCEIVER_CTRL); + l &= ~(7 << 4); + if (!is_device) + l |= (3 << 1); + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + + return 3 << 16; + } + + /* alternate pin config, external transceiver */ + if (cpu_is_omap15xx()) { + printk(KERN_ERR "no usb0 alt pin config on 15xx\n"); + return 0; + } + + omap_cfg_reg(V6_USB0_TXD); + omap_cfg_reg(W9_USB0_TXEN); + omap_cfg_reg(W5_USB0_SE0); + if (nwires != 3) + omap_cfg_reg(Y5_USB0_RCV); + + /* NOTE: SPEED and SUSP aren't configured here. OTG hosts + * may be able to use I2C requests to set those bits along + * with VBUS switching and overcurrent detection. + */ + + if (nwires != 6) { + u32 l; + + l = omap_readl(USB_TRANSCEIVER_CTRL); + l &= ~CONF_USB2_UNI_R; + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + + switch (nwires) { + case 3: + syscon1 = 2; + break; + case 4: + syscon1 = 1; + break; + case 6: + syscon1 = 3; + { + u32 l; + + omap_cfg_reg(AA9_USB0_VP); + omap_cfg_reg(R9_USB0_VM); + l = omap_readl(USB_TRANSCEIVER_CTRL); + l |= CONF_USB2_UNI_R; + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + break; + default: + printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", + 0, nwires); + } + + return syscon1 << 16; +} + +u32 __init omap1_usb1_init(unsigned nwires) +{ + u32 syscon1 = 0; + + if (!cpu_is_omap15xx() && nwires != 6) { + u32 l; + + l = omap_readl(USB_TRANSCEIVER_CTRL); + l &= ~CONF_USB1_UNI_R; + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + if (nwires == 0) + return 0; + + /* external transceiver */ + omap_cfg_reg(USB1_TXD); + omap_cfg_reg(USB1_TXEN); + if (nwires != 3) + omap_cfg_reg(USB1_RCV); + + if (cpu_is_omap15xx()) { + omap_cfg_reg(USB1_SEO); + omap_cfg_reg(USB1_SPEED); + // SUSP + } else if (cpu_is_omap1610() || cpu_is_omap5912()) { + omap_cfg_reg(W13_1610_USB1_SE0); + omap_cfg_reg(R13_1610_USB1_SPEED); + // SUSP + } else if (cpu_is_omap1710()) { + omap_cfg_reg(R13_1710_USB1_SE0); + // SUSP + } else { + pr_debug("usb%d cpu unrecognized\n", 1); + return 0; + } + + switch (nwires) { + case 2: + goto bad; + case 3: + syscon1 = 2; + break; + case 4: + syscon1 = 1; + break; + case 6: + syscon1 = 3; + omap_cfg_reg(USB1_VP); + omap_cfg_reg(USB1_VM); + if (!cpu_is_omap15xx()) { + u32 l; + + l = omap_readl(USB_TRANSCEIVER_CTRL); + l |= CONF_USB1_UNI_R; + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + break; + default: +bad: + printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", + 1, nwires); + } + + return syscon1 << 20; +} + +u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) +{ + u32 syscon1 = 0; + + /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */ + if (alt_pingroup || nwires == 0) + return 0; + + if (!cpu_is_omap15xx() && nwires != 6) { + u32 l; + + l = omap_readl(USB_TRANSCEIVER_CTRL); + l &= ~CONF_USB2_UNI_R; + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + + /* external transceiver */ + if (cpu_is_omap15xx()) { + omap_cfg_reg(USB2_TXD); + omap_cfg_reg(USB2_TXEN); + omap_cfg_reg(USB2_SEO); + if (nwires != 3) + omap_cfg_reg(USB2_RCV); + /* there is no USB2_SPEED */ + } else if (cpu_is_omap16xx()) { + omap_cfg_reg(V6_USB2_TXD); + omap_cfg_reg(W9_USB2_TXEN); + omap_cfg_reg(W5_USB2_SE0); + if (nwires != 3) + omap_cfg_reg(Y5_USB2_RCV); + // FIXME omap_cfg_reg(USB2_SPEED); + } else { + pr_debug("usb%d cpu unrecognized\n", 1); + return 0; + } + + // omap_cfg_reg(USB2_SUSP); + + switch (nwires) { + case 2: + goto bad; + case 3: + syscon1 = 2; + break; + case 4: + syscon1 = 1; + break; + case 5: + goto bad; + case 6: + syscon1 = 3; + if (cpu_is_omap15xx()) { + omap_cfg_reg(USB2_VP); + omap_cfg_reg(USB2_VM); + } else { + u32 l; + + omap_cfg_reg(AA9_USB2_VP); + omap_cfg_reg(R9_USB2_VM); + l = omap_readl(USB_TRANSCEIVER_CTRL); + l |= CONF_USB2_UNI_R; + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + break; + default: +bad: + printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", + 2, nwires); + } + + return syscon1 << 24; +} + +#ifdef CONFIG_ARCH_OMAP15XX + +/* ULPD_DPLL_CTRL */ +#define DPLL_IOB (1 << 13) +#define DPLL_PLL_ENABLE (1 << 4) +#define DPLL_LOCK (1 << 0) + +/* ULPD_APLL_CTRL */ +#define APLL_NDPLL_SWITCH (1 << 0) + +static void __init omap_1510_usb_init(struct omap_usb_config *config) +{ + unsigned int val; + u16 w; + + config->usb0_init(config->pins[0], is_usb0_device(config)); + config->usb1_init(config->pins[1]); + config->usb2_init(config->pins[2], 0); + + val = omap_readl(MOD_CONF_CTRL_0) & ~(0x3f << 1); + val |= (config->hmc_mode << 1); + omap_writel(val, MOD_CONF_CTRL_0); + + printk("USB: hmc %d", config->hmc_mode); + if (config->pins[0]) + printk(", usb0 %d wires%s", config->pins[0], + is_usb0_device(config) ? " (dev)" : ""); + if (config->pins[1]) + printk(", usb1 %d wires", config->pins[1]); + if (config->pins[2]) + printk(", usb2 %d wires", config->pins[2]); + printk("\n"); + + /* use DPLL for 48 MHz function clock */ + pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL), + omap_readw(ULPD_DPLL_CTRL), omap_readw(ULPD_SOFT_REQ)); + + w = omap_readw(ULPD_APLL_CTRL); + w &= ~APLL_NDPLL_SWITCH; + omap_writew(w, ULPD_APLL_CTRL); + + w = omap_readw(ULPD_DPLL_CTRL); + w |= DPLL_IOB | DPLL_PLL_ENABLE; + omap_writew(w, ULPD_DPLL_CTRL); + + w = omap_readw(ULPD_SOFT_REQ); + w |= SOFT_UDC_REQ | SOFT_DPLL_REQ; + omap_writew(w, ULPD_SOFT_REQ); + + while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK)) + cpu_relax(); + +#ifdef CONFIG_USB_GADGET_OMAP + if (config->register_dev) { + int status; + + udc_device.dev.platform_data = config; + status = platform_device_register(&udc_device); + if (status) + pr_debug("can't register UDC device, %d\n", status); + /* udc driver gates 48MHz by D+ pullup */ + } +#endif + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + if (config->register_host) { + int status; + + ohci_device.dev.platform_data = config; + status = platform_device_register(&ohci_device); + if (status) + pr_debug("can't register OHCI device, %d\n", status); + /* hcd explicitly gates 48MHz */ + } +#endif +} + +#else +static inline void omap_1510_usb_init(struct omap_usb_config *config) {} +#endif + +void __init omap1_usb_init(struct omap_usb_config *pdata) +{ + pdata->usb0_init = omap1_usb0_init; + pdata->usb1_init = omap1_usb1_init; + pdata->usb2_init = omap1_usb2_init; + udc_device_init(pdata); + ohci_device_init(pdata); + otg_device_init(pdata); + + if (cpu_is_omap7xx() || cpu_is_omap16xx()) + omap_otg_init(pdata); + else if (cpu_is_omap15xx()) + omap_1510_usb_init(pdata); + else + printk(KERN_ERR "USB: No init for your chip yet\n"); +} |