summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap1
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap1')
-rw-r--r--arch/arm/mach-omap1/ams-delta-fiq-handler.S2
-rw-r--r--arch/arm/mach-omap1/board-sx1.c2
-rw-r--r--arch/arm/mach-omap1/devices.c2
-rw-r--r--arch/arm/mach-omap1/flash.c2
-rw-r--r--arch/arm/mach-omap1/include/mach/ams-delta-fiq.h2
-rw-r--r--arch/arm/mach-omap1/pm_bus.c69
-rw-r--r--arch/arm/mach-omap1/time.c69
7 files changed, 49 insertions, 99 deletions
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index 927d5a18176..c1c5fb6a5b4 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -79,7 +79,7 @@
/*
- * Register useage
+ * Register usage
* r8 - temporary
* r9 - the driver buffer
* r10 - temporary
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index d41fe2d0616..0ad781db4e6 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -399,7 +399,7 @@ static void __init omap_sx1_init(void)
sx1_mmc_init();
/* turn on USB power */
- /* sx1_setusbpower(1); cant do it here because i2c is not ready */
+ /* sx1_setusbpower(1); can't do it here because i2c is not ready */
gpio_request(1, "A_IRDA_OFF");
gpio_request(11, "A_SWITCH");
gpio_request(15, "A_USB_ON");
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index b0f4c231595..36f26c3fa25 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -281,7 +281,7 @@ static inline void omap_init_audio(void) {}
* Claiming GPIOs, and setting their direction and initial values, is the
* responsibility of the device drivers. So is responding to probe().
*
- * Board-specific knowlege like creating devices or pin setup is to be
+ * Board-specific knowledge like creating devices or pin setup is to be
* kept out of drivers as much as possible. In particular, pin setup
* may be handled by the boot loader, and drivers should expect it will
* normally have been done by the time they're probed.
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index acd16166640..1749cb37dda 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -13,7 +13,7 @@
#include <plat/tc.h>
#include <plat/flash.h>
-void omap1_set_vpp(struct map_info *map, int enable)
+void omap1_set_vpp(struct platform_device *pdev, int enable)
{
static int count;
u32 l;
diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
index 7a2df29400c..23eed0035ed 100644
--- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
+++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
@@ -31,7 +31,7 @@
#endif
/*
- * These are the offsets from the begining of the fiq_buffer. They are put here
+ * These are the offsets from the beginning of the fiq_buffer. They are put here
* since the buffer and header need to be accessed by drivers servicing devices
* which generate GPIO interrupts - e.g. keyboard, modem, hook switch.
*/
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index 6588c22b8a6..fe31d933f0e 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -24,75 +24,50 @@
#ifdef CONFIG_PM_RUNTIME
static int omap1_pm_runtime_suspend(struct device *dev)
{
- struct clk *iclk, *fclk;
- int ret = 0;
+ int ret;
dev_dbg(dev, "%s\n", __func__);
ret = pm_generic_runtime_suspend(dev);
+ if (ret)
+ return ret;
- fclk = clk_get(dev, "fck");
- if (!IS_ERR(fclk)) {
- clk_disable(fclk);
- clk_put(fclk);
- }
-
- iclk = clk_get(dev, "ick");
- if (!IS_ERR(iclk)) {
- clk_disable(iclk);
- clk_put(iclk);
+ ret = pm_runtime_clk_suspend(dev);
+ if (ret) {
+ pm_generic_runtime_resume(dev);
+ return ret;
}
return 0;
-};
+}
static int omap1_pm_runtime_resume(struct device *dev)
{
- struct clk *iclk, *fclk;
-
dev_dbg(dev, "%s\n", __func__);
- iclk = clk_get(dev, "ick");
- if (!IS_ERR(iclk)) {
- clk_enable(iclk);
- clk_put(iclk);
- }
+ pm_runtime_clk_resume(dev);
+ return pm_generic_runtime_resume(dev);
+}
- fclk = clk_get(dev, "fck");
- if (!IS_ERR(fclk)) {
- clk_enable(fclk);
- clk_put(fclk);
- }
+static struct dev_power_domain default_power_domain = {
+ .ops = {
+ .runtime_suspend = omap1_pm_runtime_suspend,
+ .runtime_resume = omap1_pm_runtime_resume,
+ USE_PLATFORM_PM_SLEEP_OPS
+ },
+};
- return pm_generic_runtime_resume(dev);
+static struct pm_clk_notifier_block platform_bus_notifier = {
+ .pwr_domain = &default_power_domain,
+ .con_ids = { "ick", "fck", NULL, },
};
static int __init omap1_pm_runtime_init(void)
{
- const struct dev_pm_ops *pm;
- struct dev_pm_ops *omap_pm;
-
if (!cpu_class_is_omap1())
return -ENODEV;
- pm = platform_bus_get_pm_ops();
- if (!pm) {
- pr_err("%s: unable to get dev_pm_ops from platform_bus\n",
- __func__);
- return -ENODEV;
- }
-
- omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL);
- if (!omap_pm) {
- pr_err("%s: unable to alloc memory for new dev_pm_ops\n",
- __func__);
- return -ENOMEM;
- }
-
- omap_pm->runtime_suspend = omap1_pm_runtime_suspend;
- omap_pm->runtime_resume = omap1_pm_runtime_resume;
-
- platform_bus_set_pm_ops(omap_pm);
+ pm_runtime_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
return 0;
}
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 6885d2fac18..03e1e1062ad 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -68,49 +68,50 @@ typedef struct {
} omap_mpu_timer_regs_t;
#define omap_mpu_timer_base(n) \
-((volatile omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
+((omap_mpu_timer_regs_t __iomem *)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
(n)*OMAP_MPU_TIMER_OFFSET))
static inline unsigned long notrace omap_mpu_timer_read(int nr)
{
- volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
- return timer->read_tim;
+ omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
+ return readl(&timer->read_tim);
}
static inline void omap_mpu_set_autoreset(int nr)
{
- volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+ omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
- timer->cntl = timer->cntl | MPU_TIMER_AR;
+ writel(readl(&timer->cntl) | MPU_TIMER_AR, &timer->cntl);
}
static inline void omap_mpu_remove_autoreset(int nr)
{
- volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+ omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
- timer->cntl = timer->cntl & ~MPU_TIMER_AR;
+ writel(readl(&timer->cntl) & ~MPU_TIMER_AR, &timer->cntl);
}
static inline void omap_mpu_timer_start(int nr, unsigned long load_val,
int autoreset)
{
- volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
- unsigned int timerflags = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST);
+ omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
+ unsigned int timerflags = MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST;
- if (autoreset) timerflags |= MPU_TIMER_AR;
+ if (autoreset)
+ timerflags |= MPU_TIMER_AR;
- timer->cntl = MPU_TIMER_CLOCK_ENABLE;
+ writel(MPU_TIMER_CLOCK_ENABLE, &timer->cntl);
udelay(1);
- timer->load_tim = load_val;
+ writel(load_val, &timer->load_tim);
udelay(1);
- timer->cntl = timerflags;
+ writel(timerflags, &timer->cntl);
}
static inline void omap_mpu_timer_stop(int nr)
{
- volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+ omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
- timer->cntl &= ~MPU_TIMER_ST;
+ writel(readl(&timer->cntl) & ~MPU_TIMER_ST, &timer->cntl);
}
/*
@@ -189,38 +190,11 @@ static __init void omap_init_mpu_timer(unsigned long rate)
* ---------------------------------------------------------------------------
*/
-static unsigned long omap_mpu_timer2_overflows;
-
-static irqreturn_t omap_mpu_timer2_interrupt(int irq, void *dev_id)
-{
- omap_mpu_timer2_overflows++;
- return IRQ_HANDLED;
-}
-
-static struct irqaction omap_mpu_timer2_irq = {
- .name = "mpu_timer2",
- .flags = IRQF_DISABLED,
- .handler = omap_mpu_timer2_interrupt,
-};
-
-static cycle_t mpu_read(struct clocksource *cs)
-{
- return ~omap_mpu_timer_read(1);
-}
-
-static struct clocksource clocksource_mpu = {
- .name = "mpu_timer2",
- .rating = 300,
- .read = mpu_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static DEFINE_CLOCK_DATA(cd);
static inline unsigned long long notrace _omap_mpu_sched_clock(void)
{
- u32 cyc = mpu_read(&clocksource_mpu);
+ u32 cyc = ~omap_mpu_timer_read(1);
return cyc_to_sched_clock(&cd, cyc, (u32)~0);
}
@@ -238,21 +212,22 @@ static unsigned long long notrace omap_mpu_sched_clock(void)
static void notrace mpu_update_sched_clock(void)
{
- u32 cyc = mpu_read(&clocksource_mpu);
+ u32 cyc = ~omap_mpu_timer_read(1);
update_sched_clock(&cd, cyc, (u32)~0);
}
static void __init omap_init_clocksource(unsigned long rate)
{
+ omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(1);
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
- setup_irq(INT_TIMER2, &omap_mpu_timer2_irq);
omap_mpu_timer_start(1, ~0, 1);
init_sched_clock(&cd, mpu_update_sched_clock, 32, rate);
- if (clocksource_register_hz(&clocksource_mpu, rate))
- printk(err, clocksource_mpu.name);
+ if (clocksource_mmio_init(&timer->read_tim, "mpu_timer2", rate,
+ 300, 32, clocksource_mmio_readl_down))
+ printk(err, "mpu_timer2");
}
static void __init omap_mpu_timer_init(void)