diff options
Diffstat (limited to 'arch/arm/mach-omap1')
-rw-r--r-- | arch/arm/mach-omap1/board-ams-delta.c | 6 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-h2.c | 22 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-h3.c | 14 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-innovator.c | 18 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-osk.c | 18 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-palmtt.c | 12 | ||||
-rw-r--r-- | arch/arm/mach-omap1/clock.c | 7 | ||||
-rw-r--r-- | arch/arm/mach-omap1/leds-osk.c | 4 |
8 files changed, 50 insertions, 51 deletions
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index c73ca61e585..6aac72dc430 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -135,21 +135,21 @@ static void __init ams_delta_init_irq(void) } static struct map_desc ams_delta_io_desc[] __initdata = { - // AMS_DELTA_LATCH1 + /* AMS_DELTA_LATCH1 */ { .virtual = AMS_DELTA_LATCH1_VIRT, .pfn = __phys_to_pfn(AMS_DELTA_LATCH1_PHYS), .length = 0x01000000, .type = MT_DEVICE }, - // AMS_DELTA_LATCH2 + /* AMS_DELTA_LATCH2 */ { .virtual = AMS_DELTA_LATCH2_VIRT, .pfn = __phys_to_pfn(AMS_DELTA_LATCH2_PHYS), .length = 0x01000000, .type = MT_DEVICE }, - // AMS_DELTA_MODEM + /* AMS_DELTA_MODEM */ { .virtual = AMS_DELTA_MODEM_VIRT, .pfn = __phys_to_pfn(AMS_DELTA_MODEM_PHYS), diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 1a69002e3f8..18899d74d4c 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -309,18 +309,18 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = { .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), .pcr0 = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP, - //.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ + /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */ }; static struct omap_alsa_codec_config alsa_config = { .name = "H2 TSC2101", .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, // tsc2101_configure, - .codec_set_samplerate = NULL, // tsc2101_set_samplerate, - .codec_clock_setup = NULL, // tsc2101_clock_setup, - .codec_clock_on = NULL, // tsc2101_clock_on, - .codec_clock_off = NULL, // tsc2101_clock_off, - .get_default_samplerate = NULL, // tsc2101_get_default_samplerate, + .codec_configure_dev = NULL, /* tsc2101_configure, */ + .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */ + .codec_clock_setup = NULL, /* tsc2101_clock_setup, */ + .codec_clock_on = NULL, /* tsc2101_clock_on, */ + .codec_clock_off = NULL, /* tsc2101_clock_off, */ + .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */ }; static struct platform_device h2_mcbsp1_device = { @@ -378,11 +378,11 @@ static struct omap_usb_config h2_usb_config __initdata = { .otg = 2, #ifdef CONFIG_USB_GADGET_OMAP - .hmc_mode = 19, // 0:host(off) 1:dev|otg 2:disabled - // .hmc_mode = 21, // 0:host(off) 1:dev(loopback) 2:host(loopback) + .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ + /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) /* needs OTG cable, or NONSTANDARD (B-to-MiniB) */ - .hmc_mode = 20, // 1:dev|otg(off) 1:host 2:disabled + .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ #endif .pins[1] = 3, @@ -443,7 +443,7 @@ static void __init h2_init(void) omap_cfg_reg(M8_1610_FLASH_CS2B_WE); /* MMC: card detect and WP */ - // omap_cfg_reg(U19_ARMIO1); /* CD */ + /* omap_cfg_reg(U19_ARMIO1); */ /* CD */ omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */ /* Irda */ diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index c4a7141bb78..67ae5035a7e 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -388,18 +388,18 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = { .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), .pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP, - //.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ + /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */ }; static struct omap_alsa_codec_config alsa_config = { .name = "H3 TSC2101", .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, // tsc2101_configure, - .codec_set_samplerate = NULL, // tsc2101_set_samplerate, - .codec_clock_setup = NULL, // tsc2101_clock_setup, - .codec_clock_on = NULL, // tsc2101_clock_on, - .codec_clock_off = NULL, // tsc2101_clock_off, - .get_default_samplerate = NULL, // tsc2101_get_default_samplerate, + .codec_configure_dev = NULL, /* tsc2101_configure, */ + .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */ + .codec_clock_setup = NULL, /* tsc2101_clock_setup, */ + .codec_clock_on = NULL, /* tsc2101_clock_on, */ + .codec_clock_off = NULL, /* tsc2101_clock_off, */ + .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */ }; static struct platform_device h3_mcbsp1_device = { diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 7d2d8af155a..92c14d364b5 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -134,12 +134,12 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = { static struct omap_alsa_codec_config alsa_config = { .name = "OMAP Innovator AIC23", .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, // aic23_configure, - .codec_set_samplerate = NULL, // aic23_set_samplerate, - .codec_clock_setup = NULL, // aic23_clock_setup, - .codec_clock_on = NULL, // aic23_clock_on, - .codec_clock_off = NULL, // aic23_clock_off, - .get_default_samplerate = NULL, // aic23_get_default_samplerate, + .codec_configure_dev = NULL, /* aic23_configure, */ + .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ + .codec_clock_setup = NULL, /* aic23_clock_setup, */ + .codec_clock_on = NULL, /* aic23_clock_on, */ + .codec_clock_off = NULL, /* aic23_clock_off, */ + .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ }; static struct platform_device innovator_mcbsp1_device = { @@ -345,11 +345,11 @@ static struct omap_usb_config h2_usb_config __initdata = { .otg = 2, #ifdef CONFIG_USB_GADGET_OMAP - .hmc_mode = 19, // 0:host(off) 1:dev|otg 2:disabled - // .hmc_mode = 21, // 0:host(off) 1:dev(loopback) 2:host(loopback) + .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ + /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */ - .hmc_mode = 20, // 1:dev|otg(off) 1:host 2:disabled + .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ #endif .pins[1] = 3, diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 84333440008..e1f813d4417 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -160,12 +160,12 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = { static struct omap_alsa_codec_config alsa_config = { .name = "OSK AIC23", .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, // aic23_configure, - .codec_set_samplerate = NULL, // aic23_set_samplerate, - .codec_clock_setup = NULL, // aic23_clock_setup, - .codec_clock_on = NULL, // aic23_clock_on, - .codec_clock_off = NULL, // aic23_clock_off, - .get_default_samplerate = NULL, // aic23_get_default_samplerate, + .codec_configure_dev = NULL, /* aic23_configure, */ + .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ + .codec_clock_setup = NULL, /* aic23_clock_setup, */ + .codec_clock_on = NULL, /* aic23_clock_on, */ + .codec_clock_off = NULL, /* aic23_clock_off, */ + .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ }; static struct platform_device osk5912_mcbsp1_device = { @@ -392,7 +392,7 @@ static void __init osk_mistral_init(void) omap_cfg_reg(W13_1610_CCP_CLKM); omap_cfg_reg(Y12_1610_CCP_CLKP); /* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */ - // omap_cfg_reg(Y14_1610_CCP_DATAM); + /* omap_cfg_reg(Y14_1610_CCP_DATAM); */ omap_cfg_reg(W14_1610_CCP_DATAP); /* CAM_PWDN */ @@ -404,8 +404,8 @@ static void __init osk_mistral_init(void) pr_debug("OSK+Mistral: CAM_PWDN is awol\n"); - // omap_cfg_reg(P19_1610_GPIO6); // BUSY - omap_cfg_reg(P20_1610_GPIO4); // PENIRQ + /* omap_cfg_reg(P19_1610_GPIO6); */ /* BUSY */ + omap_cfg_reg(P20_1610_GPIO4); /* PENIRQ */ set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING); spi_register_board_info(mistral_boardinfo, ARRAY_SIZE(mistral_boardinfo)); diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index ed7094a7006..772daed493c 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -144,12 +144,12 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = { static struct omap_alsa_codec_config alsa_config = { .name = "PalmTT AIC23", .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, // aic23_configure, - .codec_set_samplerate = NULL, // aic23_set_samplerate, - .codec_clock_setup = NULL, // aic23_clock_setup, - .codec_clock_on = NULL, // aic23_clock_on, - .codec_clock_off = NULL, // aic23_clock_off, - .get_default_samplerate = NULL, // aic23_get_default_samplerate, + .codec_configure_dev = NULL, /* aic23_configure, */ + .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ + .codec_clock_setup = NULL, /* aic23_clock_setup, */ + .codec_clock_on = NULL, /* aic23_clock_on, */ + .codec_clock_off = NULL, /* aic23_clock_off, */ + .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ }; static struct platform_device palmtt_mcbsp1_device = { diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 5d9faa68d2e..4ea2933f887 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -1,4 +1,3 @@ -//kernel/linux-omap-fsample/arch/arm/mach-omap1/clock.c#2 - edit change 3808 (text) /* * linux/arch/arm/mach-omap1/clock.c * @@ -650,9 +649,9 @@ static void __init omap1_clk_disable_unused(struct clk *clk) /* FIXME: This clock seems to be necessary but no-one * has asked for its activation. */ - if (clk == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera - || clk == &ck_dpll1out.clk // FIX: SoSSI, SSR - || clk == &arm_gpio_ck // FIX: GPIO code for 1510 + if (clk == &tc2_ck /* FIX: pm.c (SRAM), CCP, Camera */ + || clk == &ck_dpll1out.clk /* FIX: SoSSI, SSR */ + || clk == &arm_gpio_ck /* FIX: GPIO code for 1510 */ ) { printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", clk->name); diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c index 6939d5e7569..026685ed461 100644 --- a/arch/arm/mach-omap1/leds-osk.c +++ b/arch/arm/mach-omap1/leds-osk.c @@ -82,7 +82,7 @@ static void mistral_setled(void) red = 1; else if (hw_led_state & IDLE_LED) green = 1; - // else both sides are disabled + /* else both sides are disabled */ omap_set_gpio_dataout(GPIO_LED_GREEN, green); omap_set_gpio_dataout(GPIO_LED_RED, red); @@ -112,7 +112,7 @@ void osk_leds_event(led_event_t evt) case led_stop: led_state &= ~LED_STATE_ENABLED; hw_led_state = 0; - // NOTE: work may still be pending!! + /* NOTE: work may still be pending!! */ break; case led_claim: |