diff options
Diffstat (limited to 'arch/arm/mach-omap1')
49 files changed, 567 insertions, 305 deletions
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 4f8d66f044e..dfab466ebd1 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -37,7 +37,6 @@ comment "OMAP Board Type" config MACH_OMAP_INNOVATOR bool "TI Innovator" depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) - select OMAP_MCBSP help TI OMAP 1510 or 1610 Innovator board support. Say Y here if you have such a board. @@ -45,7 +44,6 @@ config MACH_OMAP_INNOVATOR config MACH_OMAP_H2 bool "TI H2 Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX - select OMAP_MCBSP help TI OMAP 1610/1611B H2 board support. Say Y here if you have such a board. @@ -72,7 +70,6 @@ config MACH_HERALD config MACH_OMAP_OSK bool "TI OSK Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX - select OMAP_MCBSP help TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here if you have such a board. @@ -155,6 +152,10 @@ config MACH_AMS_DELTA bool "Amstrad E3 (Delta)" depends on ARCH_OMAP1 && ARCH_OMAP15XX select FIQ + select GPIO_GENERIC_PLATFORM + select LEDS_GPIO_REGISTER + select REGULATOR + select REGULATOR_FIXED_VOLTAGE help Support for the Amstrad E3 (codename Delta) videophone. Say Y here if you have such a device. diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 11c85cd2731..9923f92b545 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -6,7 +6,9 @@ obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o -obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o +ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) +obj-y += mcbsp.o +endif obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index c1c5fb6a5b4..a051cb8ae57 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -14,12 +14,14 @@ */ #include <linux/linkage.h> +#include <asm/assembler.h> -#include <plat/io.h> #include <plat/board-ams-delta.h> #include <mach/ams-delta-fiq.h> +#include "iomap.h" + /* * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c. * Unfortunately, those were not placed in a separate header file. diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index 152b32c15e2..fcce7ff3763 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -22,6 +22,7 @@ #include <plat/board-ams-delta.h> #include <asm/fiq.h> + #include <mach/ams-delta-fiq.h> static struct fiq_handler fh = { diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 88909cc0b25..c1b681ef4cb 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -11,6 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/basic_mmio_gpio.h> #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> @@ -18,30 +19,33 @@ #include <linux/interrupt.h> #include <linux/leds.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/serial_8250.h> #include <linux/export.h> +#include <linux/omapfb.h> +#include <linux/io.h> #include <media/soc_camera.h> #include <asm/serial.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/io.h> #include <plat/board-ams-delta.h> #include <plat/keypad.h> #include <plat/mux.h> #include <plat/usb.h> #include <plat/board.h> -#include "common.h" -#include <mach/camera.h> +#include <mach/hardware.h> #include <mach/ams-delta-fiq.h> +#include <mach/camera.h> -static u8 ams_delta_latch1_reg; -static u16 ams_delta_latch2_reg; +#include "iomap.h" +#include "common.h" static const unsigned int ams_delta_keymap[] = { KEY(0, 0, KEY_F1), /* Advert */ @@ -121,58 +125,188 @@ static const unsigned int ams_delta_keymap[] = { KEY(7, 3, KEY_LEFTCTRL), /* Vol down */ }; -void ams_delta_latch1_write(u8 mask, u8 value) -{ - ams_delta_latch1_reg &= ~mask; - ams_delta_latch1_reg |= value; - *(volatile __u8 *) AMS_DELTA_LATCH1_VIRT = ams_delta_latch1_reg; -} - -void ams_delta_latch2_write(u16 mask, u16 value) -{ - ams_delta_latch2_reg &= ~mask; - ams_delta_latch2_reg |= value; - *(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg; -} +#define LATCH1_PHYS 0x01000000 +#define LATCH1_VIRT 0xEA000000 +#define MODEM_PHYS 0x04000000 +#define MODEM_VIRT 0xEB000000 +#define LATCH2_PHYS 0x08000000 +#define LATCH2_VIRT 0xEC000000 static struct map_desc ams_delta_io_desc[] __initdata = { /* AMS_DELTA_LATCH1 */ { - .virtual = AMS_DELTA_LATCH1_VIRT, - .pfn = __phys_to_pfn(AMS_DELTA_LATCH1_PHYS), + .virtual = LATCH1_VIRT, + .pfn = __phys_to_pfn(LATCH1_PHYS), .length = 0x01000000, .type = MT_DEVICE }, /* AMS_DELTA_LATCH2 */ { - .virtual = AMS_DELTA_LATCH2_VIRT, - .pfn = __phys_to_pfn(AMS_DELTA_LATCH2_PHYS), + .virtual = LATCH2_VIRT, + .pfn = __phys_to_pfn(LATCH2_PHYS), .length = 0x01000000, .type = MT_DEVICE }, /* AMS_DELTA_MODEM */ { - .virtual = AMS_DELTA_MODEM_VIRT, - .pfn = __phys_to_pfn(AMS_DELTA_MODEM_PHYS), + .virtual = MODEM_VIRT, + .pfn = __phys_to_pfn(MODEM_PHYS), .length = 0x01000000, .type = MT_DEVICE } }; -static struct omap_lcd_config ams_delta_lcd_config = { +static struct omap_lcd_config ams_delta_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_usb_config ams_delta_usb_config __initdata = { +static struct omap_usb_config ams_delta_usb_config = { .register_host = 1, .hmc_mode = 16, .pins[0] = 2, }; -static struct omap_board_config_kernel ams_delta_config[] __initdata = { - { OMAP_TAG_LCD, &ams_delta_lcd_config }, +#define LATCH1_GPIO_BASE 232 +#define LATCH1_NGPIO 8 + +static struct resource latch1_resources[] = { + [0] = { + .name = "dat", + .start = LATCH1_PHYS, + .end = LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8, + .flags = IORESOURCE_MEM, + }, }; +static struct bgpio_pdata latch1_pdata = { + .base = LATCH1_GPIO_BASE, + .ngpio = LATCH1_NGPIO, +}; + +static struct platform_device latch1_gpio_device = { + .name = "basic-mmio-gpio", + .id = 0, + .resource = latch1_resources, + .num_resources = ARRAY_SIZE(latch1_resources), + .dev = { + .platform_data = &latch1_pdata, + }, +}; + +static struct resource latch2_resources[] = { + [0] = { + .name = "dat", + .start = LATCH2_PHYS, + .end = LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8, + .flags = IORESOURCE_MEM, + }, +}; + +static struct bgpio_pdata latch2_pdata = { + .base = AMS_DELTA_LATCH2_GPIO_BASE, + .ngpio = AMS_DELTA_LATCH2_NGPIO, +}; + +static struct platform_device latch2_gpio_device = { + .name = "basic-mmio-gpio", + .id = 1, + .resource = latch2_resources, + .num_resources = ARRAY_SIZE(latch2_resources), + .dev = { + .platform_data = &latch2_pdata, + }, +}; + +static const struct gpio latch_gpios[] __initconst = { + { + .gpio = LATCH1_GPIO_BASE + 6, + .flags = GPIOF_OUT_INIT_LOW, + .label = "dockit1", + }, + { + .gpio = LATCH1_GPIO_BASE + 7, + .flags = GPIOF_OUT_INIT_LOW, + .label = "dockit2", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN, + .flags = GPIOF_OUT_INIT_LOW, + .label = "scard_rstin", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC, + .flags = GPIOF_OUT_INIT_LOW, + .label = "scard_cmdvcc", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_MODEM_CODEC, + .flags = GPIOF_OUT_INIT_LOW, + .label = "modem_codec", + }, + { + .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14, + .flags = GPIOF_OUT_INIT_LOW, + .label = "hookflash1", + }, + { + .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15, + .flags = GPIOF_OUT_INIT_LOW, + .label = "hookflash2", + }, +}; + +static struct regulator_consumer_supply modem_nreset_consumers[] = { + REGULATOR_SUPPLY("RESET#", "serial8250.1"), + REGULATOR_SUPPLY("POR", "cx20442-codec"), +}; + +static struct regulator_init_data modem_nreset_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(modem_nreset_consumers), + .consumer_supplies = modem_nreset_consumers, +}; + +static struct fixed_voltage_config modem_nreset_config = { + .supply_name = "modem_nreset", + .microvolts = 3300000, + .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET, + .startup_delay = 25000, + .enable_high = 1, + .enabled_at_boot = 1, + .init_data = &modem_nreset_data, +}; + +static struct platform_device modem_nreset_device = { + .name = "reg-fixed-voltage", + .id = -1, + .dev = { + .platform_data = &modem_nreset_config, + }, +}; + +struct modem_private_data { + struct regulator *regulator; +}; + +static struct modem_private_data modem_priv; + +void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value) +{ + int bit = 0; + u16 bitpos = 1 << bit; + + for (; bit < ngpio; bit++, bitpos = bitpos << 1) { + if (!(mask & bitpos)) + continue; + else + gpio_set_value(base + bit, (value & bitpos) != 0); + } +} +EXPORT_SYMBOL(ams_delta_latch_write); + static struct resource ams_delta_nand_resources[] = { [0] = { .start = OMAP1_MPUIO_BASE, @@ -202,7 +336,7 @@ static const struct matrix_keymap_data ams_delta_keymap_data = { .keymap_size = ARRAY_SIZE(ams_delta_keymap), }; -static struct omap_kp_platform_data ams_delta_kp_data __initdata = { +static struct omap_kp_platform_data ams_delta_kp_data = { .rows = 8, .cols = 8, .keymap_data = &ams_delta_keymap_data, @@ -224,9 +358,45 @@ static struct platform_device ams_delta_lcd_device = { .id = -1, }; -static struct platform_device ams_delta_led_device = { - .name = "ams-delta-led", - .id = -1 +static const struct gpio_led gpio_leds[] __initconst = { + { + .name = "camera", + .gpio = LATCH1_GPIO_BASE + 0, + .default_state = LEDS_GPIO_DEFSTATE_OFF, +#ifdef CONFIG_LEDS_TRIGGERS + .default_trigger = "ams_delta_camera", +#endif + }, + { + .name = "advert", + .gpio = LATCH1_GPIO_BASE + 1, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "email", + .gpio = LATCH1_GPIO_BASE + 2, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "handsfree", + .gpio = LATCH1_GPIO_BASE + 3, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "voicemail", + .gpio = LATCH1_GPIO_BASE + 4, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "voice", + .gpio = LATCH1_GPIO_BASE + 5, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, +}; + +static const struct gpio_led_platform_data leds_pdata __initconst = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), }; static struct i2c_board_info ams_delta_camera_board_info[] = { @@ -275,13 +445,17 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = { }; static struct platform_device *ams_delta_devices[] __initdata = { - &ams_delta_nand_device, + &latch1_gpio_device, + &latch2_gpio_device, &ams_delta_kp_device, - &ams_delta_lcd_device, - &ams_delta_led_device, &ams_delta_camera_device, }; +static struct platform_device *late_devices[] __initdata = { + &ams_delta_nand_device, + &ams_delta_lcd_device, +}; + static void __init ams_delta_init(void) { /* mux pins for uarts */ @@ -302,37 +476,53 @@ static void __init ams_delta_init(void) omap_cfg_reg(J19_1610_CAM_D6); omap_cfg_reg(J18_1610_CAM_D7); - omap_board_config = ams_delta_config; - omap_board_config_size = ARRAY_SIZE(ams_delta_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); - /* Clear latch2 (NAND, LCD, modem enable) */ - ams_delta_latch2_write(~0, 0); - omap1_usb_init(&ams_delta_usb_config); omap1_set_camera_info(&ams_delta_camera_platform_data); #ifdef CONFIG_LEDS_TRIGGERS led_trigger_register_simple("ams_delta_camera", &ams_delta_camera_led_trigger); #endif + gpio_led_register_device(-1, &leds_pdata); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); ams_delta_init_fiq(); omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); + + omapfb_set_lcd_config(&ams_delta_lcd_config); +} + +static void modem_pm(struct uart_port *port, unsigned int state, unsigned old) +{ + struct modem_private_data *priv = port->private_data; + + if (IS_ERR(priv->regulator)) + return; + + if (state == old) + return; + + if (state == 0) + regulator_enable(priv->regulator); + else if (old == 0) + regulator_disable(priv->regulator); } static struct plat_serial8250_port ams_delta_modem_ports[] = { { - .membase = IOMEM(AMS_DELTA_MODEM_VIRT), - .mapbase = AMS_DELTA_MODEM_PHYS, + .membase = IOMEM(MODEM_VIRT), + .mapbase = MODEM_PHYS, .irq = -EINVAL, /* changed later */ .flags = UPF_BOOT_AUTOCONF, .irqflags = IRQF_TRIGGER_RISING, .iotype = UPIO_MEM, .regshift = 1, .uartclk = BASE_BAUD * 16, + .pm = modem_pm, + .private_data = &modem_priv, }, { }, }; @@ -345,13 +535,27 @@ static struct platform_device ams_delta_modem_device = { }, }; -static int __init ams_delta_modem_init(void) +static int __init late_init(void) { int err; if (!machine_is_ams_delta()) return -ENODEV; + err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios)); + if (err) { + pr_err("Couldn't take over latch1/latch2 GPIO pins\n"); + return err; + } + + platform_add_devices(late_devices, ARRAY_SIZE(late_devices)); + + err = platform_device_register(&modem_nreset_device); + if (err) { + pr_err("Couldn't register the modem regulator device\n"); + return err; + } + omap_cfg_reg(M14_1510_GPIO2); ams_delta_modem_ports[0].irq = gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ); @@ -363,13 +567,35 @@ static int __init ams_delta_modem_init(void) } gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ); - ams_delta_latch2_write( - AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC, - AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC); + /* Initialize the modem_nreset regulator consumer before use */ + modem_priv.regulator = ERR_PTR(-ENODEV); + + ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC, + AMS_DELTA_LATCH2_MODEM_CODEC); - return platform_device_register(&ams_delta_modem_device); + err = platform_device_register(&ams_delta_modem_device); + if (err) + goto gpio_free; + + /* + * Once the modem device is registered, the modem_nreset + * regulator can be requested on behalf of that device. + */ + modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev, + "RESET#"); + if (IS_ERR(modem_priv.regulator)) { + err = PTR_ERR(modem_priv.regulator); + goto unregister; + } + return 0; + +unregister: + platform_device_unregister(&ams_delta_modem_device); +gpio_free: + gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ); + return err; } -arch_initcall(ams_delta_modem_init); +late_initcall(late_init); static void __init ams_delta_map_io(void) { @@ -388,6 +614,3 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .timer = &omap1_timer, .restart = omap1_restart, MACHINE_END - -EXPORT_SYMBOL(ams_delta_latch1_write); -EXPORT_SYMBOL(ams_delta_latch2_write); diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 0b9464b4121..80bd43c7f4e 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -21,8 +21,8 @@ #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -32,9 +32,13 @@ #include <plat/flash.h> #include <plat/fpga.h> #include <plat/keypad.h> -#include "common.h" #include <plat/board.h> +#include <mach/hardware.h> + +#include "iomap.h" +#include "common.h" + /* fsample is pretty close to p2-sample */ #define fsample_cpld_read(reg) __raw_readb(reg) @@ -273,27 +277,17 @@ static struct platform_device kp_device = { .resource = kp_resources, }; -static struct platform_device lcd_device = { - .name = "lcd_p2", - .id = -1, -}; - static struct platform_device *devices[] __initdata = { &nor_device, &nand_device, &smc91x_device, &kp_device, - &lcd_device, }; static struct omap_lcd_config fsample_lcd_config = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel fsample_config[] __initdata = { - { OMAP_TAG_LCD, &fsample_lcd_config }, -}; - static void __init omap_fsample_init(void) { /* Early, board-dependent init */ @@ -352,10 +346,10 @@ static void __init omap_fsample_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - omap_board_config = fsample_config; - omap_board_config_size = ARRAY_SIZE(fsample_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); + + omapfb_set_lcd_config(&fsample_lcd_config); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 00ad6b22d60..c3068622fdc 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -30,8 +30,7 @@ #include <linux/input.h> #include <linux/i2c/tps65010.h> #include <linux/smc91x.h> - -#include <mach/hardware.h> +#include <linux/omapfb.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -43,9 +42,11 @@ #include <plat/irda.h> #include <plat/usb.h> #include <plat/keypad.h> -#include "common.h" #include <plat/flash.h> +#include <mach/hardware.h> + +#include "common.h" #include "board-h2.h" /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ @@ -325,18 +326,12 @@ static struct platform_device h2_irda_device = { .resource = h2_irda_resources, }; -static struct platform_device h2_lcd_device = { - .name = "lcd_h2", - .id = -1, -}; - static struct platform_device *h2_devices[] __initdata = { &h2_nor_device, &h2_nand_device, &h2_smc91x_device, &h2_irda_device, &h2_kp_device, - &h2_lcd_device, }; static void __init h2_init_smc91x(void) @@ -391,10 +386,6 @@ static struct omap_lcd_config h2_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel h2_config[] __initdata = { - { OMAP_TAG_LCD, &h2_lcd_config }, -}; - static void __init h2_init(void) { h2_init_smc91x(); @@ -438,13 +429,13 @@ static void __init h2_init(void) omap_cfg_reg(N19_1610_KBR5); platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); - omap_board_config = h2_config; - omap_board_config_size = ARRAY_SIZE(h2_config); omap_serial_init(); omap_register_i2c_bus(1, 100, h2_i2c_board_info, ARRAY_SIZE(h2_i2c_board_info)); omap1_usb_init(&h2_usb_config); h2_mmc_init(); + + omapfb_set_lcd_config(&h2_lcd_config); } MACHINE_START(OMAP_H2, "TI-H2") diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 4a7f2514970..64b8584f64c 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -30,24 +30,25 @@ #include <linux/spi/spi.h> #include <linux/i2c/tps65010.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> #include <asm/setup.h> #include <asm/page.h> -#include <mach/hardware.h> - #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/irqs.h> #include <plat/mux.h> #include <plat/tc.h> #include <plat/usb.h> #include <plat/keypad.h> #include <plat/dma.h> -#include "common.h" #include <plat/flash.h> +#include <mach/hardware.h> +#include <mach/irqs.h> + +#include "common.h" #include "board-h3.h" /* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ @@ -370,10 +371,6 @@ static struct omap_lcd_config h3_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel h3_config[] __initdata = { - { OMAP_TAG_LCD, &h3_lcd_config }, -}; - static struct i2c_board_info __initdata h3_i2c_board_info[] = { { I2C_BOARD_INFO("tps65013", 0x48), @@ -426,13 +423,13 @@ static void __init h3_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); spi_register_board_info(h3_spi_board_info, ARRAY_SIZE(h3_spi_board_info)); - omap_board_config = h3_config; - omap_board_config_size = ARRAY_SIZE(h3_config); omap_serial_init(); omap_register_i2c_bus(1, 100, h3_i2c_board_info, ARRAY_SIZE(h3_i2c_board_info)); omap1_usb_init(&h3_usb_config); h3_mmc_init(); + + omapfb_set_lcd_config(&h3_lcd_config); } MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 731cc3db7ab..827d83a96af 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -27,7 +27,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/input.h> -#include <linux/io.h> +#include <linux/delay.h> #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/i2c.h> @@ -36,12 +36,12 @@ #include <linux/leds.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/omapfb.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <plat/omap7xx.h> -#include "common.h" #include <plat/board.h> #include <plat/keypad.h> #include <plat/usb.h> @@ -49,7 +49,7 @@ #include <mach/irqs.h> -#include <linux/delay.h> +#include "common.h" /* LCD register definition */ #define OMAP_LCDC_CONTROL (0xfffec000 + 0x00) @@ -398,10 +398,6 @@ static struct omap_lcd_config htcherald_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel htcherald_config[] __initdata = { - { OMAP_TAG_LCD, &htcherald_lcd_config }, -}; - static struct platform_device lcd_device = { .name = "lcd_htcherald", .id = -1, @@ -580,8 +576,6 @@ static void __init htcherald_init(void) printk(KERN_INFO "HTC Herald init.\n"); /* Do board initialization before we register all the devices */ - omap_board_config = htcherald_config; - omap_board_config_size = ARRAY_SIZE(htcherald_config); platform_add_devices(devices, ARRAY_SIZE(devices)); htcherald_disable_watchdog(); @@ -598,6 +592,8 @@ static void __init htcherald_init(void) htc_mmc_data[0] = &htc_mmc1_data; omap1_init_mmc(htc_mmc_data, 1); #endif + + omapfb_set_lcd_config(&htcherald_lcd_config); } MACHINE_START(HERALD, "HTC Herald") diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 309369ea697..61219182d16 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -25,8 +25,8 @@ #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -37,9 +37,13 @@ #include <plat/tc.h> #include <plat/usb.h> #include <plat/keypad.h> -#include "common.h" #include <plat/mmc.h> +#include <mach/hardware.h> + +#include "iomap.h" +#include "common.h" + /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define INNOVATOR1610_ETHR_START 0x04000300 @@ -370,10 +374,6 @@ static inline void innovator_mmc_init(void) } #endif -static struct omap_board_config_kernel innovator_config[] = { - { OMAP_TAG_LCD, NULL }, -}; - static void __init innovator_init(void) { if (cpu_is_omap1510()) @@ -416,17 +416,15 @@ static void __init innovator_init(void) #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { omap1_usb_init(&innovator1510_usb_config); - innovator_config[1].data = &innovator1510_lcd_config; + omapfb_set_lcd_config(&innovator1510_lcd_config); } #endif #ifdef CONFIG_ARCH_OMAP16XX if (cpu_is_omap1610()) { omap1_usb_init(&h2_usb_config); - innovator_config[1].data = &innovator1610_lcd_config; + omapfb_set_lcd_config(&innovator1610_lcd_config); } #endif - omap_board_config = innovator_config; - omap_board_config_size = ARRAY_SIZE(innovator_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); innovator_mmc_init(); diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index f9efc036ba9..fe95ec5f6f0 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -21,7 +21,6 @@ #include <linux/workqueue.h> #include <linux/delay.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -30,12 +29,14 @@ #include <plat/usb.h> #include <plat/board.h> #include <plat/keypad.h> -#include "common.h" -#include <plat/hwa742.h> #include <plat/lcd_mipid.h> #include <plat/mmc.h> #include <plat/clock.h> +#include <mach/hardware.h> + +#include "common.h" + #define ADS7846_PENDOWN_GPIO 15 static const unsigned int nokia770_keymap[] = { @@ -99,15 +100,16 @@ static struct mipid_platform_data nokia770_mipid_platform_data = { .shutdown = mipid_shutdown, }; +static struct omap_lcd_config nokia770_lcd_config __initdata = { + .ctrl_name = "hwa742", +}; + static void __init mipid_dev_init(void) { - const struct omap_lcd_config *conf; + nokia770_mipid_platform_data.nreset_gpio = 13; + nokia770_mipid_platform_data.data_lines = 16; - conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); - if (conf != NULL) { - nokia770_mipid_platform_data.nreset_gpio = conf->nreset_gpio; - nokia770_mipid_platform_data.data_lines = conf->data_lines; - } + omapfb_set_lcd_config(&nokia770_lcd_config); } static void __init ads7846_dev_init(void) @@ -150,14 +152,9 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = { }, }; -static struct hwa742_platform_data nokia770_hwa742_platform_data = { - .te_connected = 1, -}; - static void __init hwa742_dev_init(void) { clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL); - omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data); } /* assume no Mini-AB port */ diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 675de06557a..1fe347396f4 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -34,15 +34,12 @@ #include <linux/i2c.h> #include <linux/leds.h> #include <linux/smc91x.h> - +#include <linux/omapfb.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> - #include <linux/i2c/tps65010.h> -#include <mach/hardware.h> - #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -51,6 +48,9 @@ #include <plat/usb.h> #include <plat/mux.h> #include <plat/tc.h> + +#include <mach/hardware.h> + #include "common.h" /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ @@ -300,12 +300,6 @@ static struct omap_lcd_config osk_lcd_config __initdata = { }; #endif -static struct omap_board_config_kernel osk_config[] __initdata = { -#ifdef CONFIG_OMAP_OSK_MISTRAL - { OMAP_TAG_LCD, &osk_lcd_config }, -#endif -}; - #ifdef CONFIG_OMAP_OSK_MISTRAL #include <linux/input.h> @@ -549,8 +543,6 @@ static void __init osk_init(void) osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys(); osk_flash_resource.end += SZ_32M - 1; platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices)); - omap_board_config = osk_config; - omap_board_config_size = ARRAY_SIZE(osk_config); l = omap_readl(USB_TRANSCEIVER_CTRL); l |= (3 << 1); @@ -567,6 +559,11 @@ static void __init osk_init(void) omap_register_i2c_bus(1, 400, osk_i2c_board_info, ARRAY_SIZE(osk_i2c_board_info)); osk_mistral_init(); + +#ifdef CONFIG_OMAP_OSK_MISTRAL + omapfb_set_lcd_config(&osk_lcd_config); +#endif + } MACHINE_START(OMAP_OSK, "TI-OSK") diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 81fa27f8836..0863d8e2bdf 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -27,8 +27,8 @@ #include <linux/spi/spi.h> #include <linux/interrupt.h> #include <linux/apm-emulation.h> +#include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -41,6 +41,9 @@ #include <plat/board.h> #include <plat/irda.h> #include <plat/keypad.h> + +#include <mach/hardware.h> + #include "common.h" #define PALMTE_USBDETECT_GPIO 0 @@ -209,10 +212,6 @@ static struct omap_lcd_config palmte_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel palmte_config[] __initdata = { - { OMAP_TAG_LCD, &palmte_lcd_config }, -}; - static struct spi_board_info palmte_spi_info[] __initdata = { { .modalias = "tsc2102", @@ -250,9 +249,6 @@ static void __init omap_palmte_init(void) omap_cfg_reg(UART3_TX); omap_cfg_reg(UART3_RX); - omap_board_config = palmte_config; - omap_board_config_size = ARRAY_SIZE(palmte_config); - platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices)); spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info)); @@ -260,6 +256,8 @@ static void __init omap_palmte_init(void) omap_serial_init(); omap1_usb_init(&palmte_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); + + omapfb_set_lcd_config(&palmte_lcd_config); } MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 81cb8217838..4ff699c509c 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -24,8 +24,10 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/leds.h> +#include <linux/omapfb.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -39,10 +41,10 @@ #include <plat/board.h> #include <plat/irda.h> #include <plat/keypad.h> -#include "common.h" -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> +#include <mach/hardware.h> + +#include "common.h" #define PALMTT_USBDETECT_GPIO 0 #define PALMTT_CABLE_GPIO 1 @@ -273,10 +275,6 @@ static struct omap_lcd_config palmtt_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel palmtt_config[] __initdata = { - { OMAP_TAG_LCD, &palmtt_lcd_config }, -}; - static void __init omap_mpu_wdt_mode(int mode) { if (mode) omap_writew(0x8000, OMAP_WDT_TIMER_MODE); @@ -298,15 +296,14 @@ static void __init omap_palmtt_init(void) omap_mpu_wdt_mode(0); - omap_board_config = palmtt_config; - omap_board_config_size = ARRAY_SIZE(palmtt_config); - platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices)); spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo)); omap_serial_init(); omap1_usb_init(&palmtt_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); + + omapfb_set_lcd_config(&palmtt_lcd_config); } MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index e881945ce8e..abcbbd339ae 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -27,8 +27,10 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/omapfb.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -41,10 +43,10 @@ #include <plat/board.h> #include <plat/irda.h> #include <plat/keypad.h> -#include "common.h" -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> +#include <mach/hardware.h> + +#include "common.h" #define PALMZ71_USBDETECT_GPIO 0 #define PALMZ71_PENIRQ_GPIO 6 @@ -239,10 +241,6 @@ static struct omap_lcd_config palmz71_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel palmz71_config[] __initdata = { - {OMAP_TAG_LCD, &palmz71_lcd_config}, -}; - static irqreturn_t palmz71_powercable(int irq, void *dev_id) { @@ -313,9 +311,6 @@ omap_palmz71_init(void) palmz71_gpio_setup(1); omap_mpu_wdt_mode(0); - omap_board_config = palmz71_config; - omap_board_config_size = ARRAY_SIZE(palmz71_config); - platform_add_devices(devices, ARRAY_SIZE(devices)); spi_register_board_info(palmz71_boardinfo, @@ -324,6 +319,8 @@ omap_palmz71_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); palmz71_gpio_setup(0); + + omapfb_set_lcd_config(&palmz71_lcd_config); } MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index c000bed7627..76d4ee05a81 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -21,8 +21,8 @@ #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -32,9 +32,13 @@ #include <plat/fpga.h> #include <plat/flash.h> #include <plat/keypad.h> -#include "common.h" #include <plat/board.h> +#include <mach/hardware.h> + +#include "iomap.h" +#include "common.h" + static const unsigned int p2_keymap[] = { KEY(0, 0, KEY_UP), KEY(1, 0, KEY_RIGHT), @@ -232,27 +236,17 @@ static struct platform_device kp_device = { .resource = kp_resources, }; -static struct platform_device lcd_device = { - .name = "lcd_p2", - .id = -1, -}; - static struct platform_device *devices[] __initdata = { &nor_device, &nand_device, &smc91x_device, &kp_device, - &lcd_device, }; static struct omap_lcd_config perseus2_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel perseus2_config[] __initdata = { - { OMAP_TAG_LCD, &perseus2_lcd_config }, -}; - static void __init perseus2_init_smc91x(void) { fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); @@ -320,10 +314,10 @@ static void __init omap_perseus2_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - omap_board_config = perseus2_config; - omap_board_config_size = ARRAY_SIZE(perseus2_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); + + omapfb_set_lcd_config(&perseus2_lcd_config); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 7bcd82ab0fd..f34cb74a9f4 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -27,8 +27,8 @@ #include <linux/i2c.h> #include <linux/errno.h> #include <linux/export.h> +#include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -40,10 +40,13 @@ #include <plat/usb.h> #include <plat/tc.h> #include <plat/board.h> -#include "common.h" #include <plat/keypad.h> #include <plat/board-sx1.h> +#include <mach/hardware.h> + +#include "common.h" + /* Write to I2C device */ int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) { @@ -355,11 +358,6 @@ static struct omap_usb_config sx1_usb_config __initdata = { /*----------- LCD -------------------------*/ -static struct platform_device sx1_lcd_device = { - .name = "lcd_sx1", - .id = -1, -}; - static struct omap_lcd_config sx1_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -368,14 +366,8 @@ static struct omap_lcd_config sx1_lcd_config __initdata = { static struct platform_device *sx1_devices[] __initdata = { &sx1_flash_device, &sx1_kp_device, - &sx1_lcd_device, &sx1_irda_device, }; -/*-----------------------------------------*/ - -static struct omap_board_config_kernel sx1_config[] __initdata = { - { OMAP_TAG_LCD, &sx1_lcd_config }, -}; /*-----------------------------------------*/ @@ -391,8 +383,6 @@ static void __init omap_sx1_init(void) platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices)); - omap_board_config = sx1_config; - omap_board_config_size = ARRAY_SIZE(sx1_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); omap1_usb_init(&sx1_usb_config); @@ -406,6 +396,8 @@ static void __init omap_sx1_init(void) gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */ gpio_direction_output(11, 0); /*A_SWITCH = 0 */ gpio_direction_output(15, 0); /*A_USB_ON = 0 */ + + omapfb_set_lcd_config(&sx1_lcd_config); } MACHINE_START(SX1, "OMAP310 based Siemens SX1") diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index f83a502dc93..659d0f75de2 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -27,18 +27,20 @@ #include <linux/smc91x.h> #include <linux/export.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <plat/board-voiceblue.h> -#include "common.h" #include <plat/flash.h> #include <plat/mux.h> #include <plat/tc.h> #include <plat/usb.h> +#include <mach/hardware.h> + +#include "common.h" + static struct plat_serial8250_port voiceblue_ports[] = { { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000), diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 0c50df05d13..67382ddd8c8 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -15,8 +15,8 @@ #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> -#include <linux/clk.h> #include <linux/io.h> +#include <linux/clk.h> #include <linux/clkdev.h> #include <asm/mach-types.h> @@ -27,6 +27,9 @@ #include <plat/sram.h> #include <plat/clkdev_omap.h> +#include <mach/hardware.h> + +#include "iomap.h" #include "clock.h" #include "opp.h" diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 94699a82a73..c6ce93f71d0 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -15,10 +15,10 @@ */ #include <linux/kernel.h> +#include <linux/io.h> #include <linux/clk.h> #include <linux/cpufreq.h> #include <linux/delay.h> -#include <linux/io.h> #include <asm/mach-types.h> /* for machine_is_* */ @@ -28,6 +28,9 @@ #include <plat/sram.h> /* for omap_sram_reprogram_clock() */ #include <plat/usb.h> /* for OTG_BASE */ +#include <mach/hardware.h> + +#include "iomap.h" #include "clock.h" /* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */ diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index a9a5146dd2d..af658ad338e 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -58,5 +58,6 @@ void omap1_restart(char, const char *); extern struct sys_timer omap1_timer; extern bool omap_32k_timer_init(void); +extern void __init omap_init_consistent_dma_size(void); #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */ diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 1d76a63c098..dcd8ddbec2b 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -15,21 +15,20 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/io.h> #include <linux/spi/spi.h> -#include <mach/camera.h> -#include <mach/hardware.h> #include <asm/mach/map.h> -#include "common.h" #include <plat/tc.h> #include <plat/board.h> #include <plat/mux.h> #include <plat/mmc.h> #include <plat/omap7xx.h> -#include <plat/mcbsp.h> +#include <mach/camera.h> +#include <mach/hardware.h> + +#include "common.h" #include "clock.h" /*-------------------------------------------------------------------------*/ @@ -250,16 +249,8 @@ static struct platform_device omap_pcm = { .id = -1, }; -OMAP_MCBSP_PLATFORM_DEVICE(1); -OMAP_MCBSP_PLATFORM_DEVICE(2); -OMAP_MCBSP_PLATFORM_DEVICE(3); - static void omap_init_audio(void) { - platform_device_register(&omap_mcbsp1); - platform_device_register(&omap_mcbsp2); - if (!cpu_is_omap7xx()) - platform_device_register(&omap_mcbsp3); platform_device_register(&omap_pcm); } diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index f5a52204b89..3ef7d52316b 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -19,11 +19,11 @@ */ #include <linux/err.h> -#include <linux/io.h> #include <linux/slab.h> #include <linux/module.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/io.h> #include <plat/dma.h> #include <plat/tc.h> diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c index 1749cb37dda..f9bf78d4fdf 100644 --- a/arch/arm/mach-omap1/flash.c +++ b/arch/arm/mach-omap1/flash.c @@ -6,13 +6,15 @@ * published by the Free Software Foundation. */ +#include <linux/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> -#include <plat/io.h> #include <plat/tc.h> #include <plat/flash.h> +#include <mach/hardware.h> + void omap1_set_vpp(struct platform_device *pdev, int enable) { static int count; diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 0a17a1a7e00..76c67b3f9f6 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -24,12 +24,15 @@ #include <linux/errno.h> #include <linux/io.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/irq.h> #include <plat/fpga.h> +#include <mach/hardware.h> + +#include "iomap.h" + static void fpga_mask_irq(struct irq_data *d) { unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE; diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 399da4ce017..634903ef829 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -42,11 +42,12 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = { .irqstatus = OMAP_MPUIO_GPIO_INT, .irqenable = OMAP_MPUIO_GPIO_MASKIT, .irqenable_inv = true, + .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE, }; static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, - .bank_type = METHOD_MPUIO, + .is_mpuio = true, .bank_width = 16, .bank_stride = 1, .regs = &omap15xx_mpuio_regs, @@ -83,11 +84,12 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = { .irqstatus = OMAP1510_GPIO_INT_STATUS, .irqenable = OMAP1510_GPIO_INT_MASK, .irqenable_inv = true, + .irqctrl = OMAP1510_GPIO_INT_CONTROL, + .pinctrl = OMAP1510_GPIO_PIN_CONTROL, }; static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = { .virtual_irq_start = IH_GPIO_BASE, - .bank_type = METHOD_GPIO_1510, .bank_width = 16, .regs = &omap15xx_gpio_regs, }; @@ -115,7 +117,6 @@ static int __init omap15xx_gpio_init(void) platform_device_register(&omap15xx_mpu_gpio); platform_device_register(&omap15xx_gpio); - gpio_bank_count = 2; return 0; } postcore_initcall(omap15xx_gpio_init); diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 0f399bd0e70..1fb3b9ad496 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -24,6 +24,9 @@ #define OMAP1610_GPIO4_BASE 0xfffbbc00 #define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE +/* smart idle, enable wakeup */ +#define SYSCONFIG_WORD 0x14 + /* mpu gpio */ static struct __initdata resource omap16xx_mpu_gpio_resources[] = { { @@ -45,11 +48,12 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = { .irqstatus = OMAP_MPUIO_GPIO_INT, .irqenable = OMAP_MPUIO_GPIO_MASKIT, .irqenable_inv = true, + .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE, }; static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, - .bank_type = METHOD_MPUIO, + .is_mpuio = true, .bank_width = 16, .bank_stride = 1, .regs = &omap16xx_mpuio_regs, @@ -89,11 +93,13 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = { .irqenable = OMAP1610_GPIO_IRQENABLE1, .set_irqenable = OMAP1610_GPIO_SET_IRQENABLE1, .clr_irqenable = OMAP1610_GPIO_CLEAR_IRQENABLE1, + .wkup_en = OMAP1610_GPIO_WAKEUPENABLE, + .edgectrl1 = OMAP1610_GPIO_EDGE_CTRL1, + .edgectrl2 = OMAP1610_GPIO_EDGE_CTRL2, }; static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = { .virtual_irq_start = IH_GPIO_BASE, - .bank_type = METHOD_GPIO_1610, .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -123,7 +129,6 @@ static struct __initdata resource omap16xx_gpio2_resources[] = { static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = { .virtual_irq_start = IH_GPIO_BASE + 16, - .bank_type = METHOD_GPIO_1610, .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -153,7 +158,6 @@ static struct __initdata resource omap16xx_gpio3_resources[] = { static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = { .virtual_irq_start = IH_GPIO_BASE + 32, - .bank_type = METHOD_GPIO_1610, .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -183,7 +187,6 @@ static struct __initdata resource omap16xx_gpio4_resources[] = { static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = { .virtual_irq_start = IH_GPIO_BASE + 48, - .bank_type = METHOD_GPIO_1610, .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -214,14 +217,42 @@ static struct __initdata platform_device * omap16xx_gpio_dev[] = { static int __init omap16xx_gpio_init(void) { int i; + void __iomem *base; + struct resource *res; + struct platform_device *pdev; + struct omap_gpio_platform_data *pdata; if (!cpu_is_omap16xx()) return -EINVAL; - for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++) - platform_device_register(omap16xx_gpio_dev[i]); + /* + * Enable system clock for GPIO module. + * The CAM_CLK_CTRL *is* really the right place. + */ + omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, + ULPD_CAM_CLK_CTRL); + + for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++) { + pdev = omap16xx_gpio_dev[i]; + pdata = pdev->dev.platform_data; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!res)) { + dev_err(&pdev->dev, "Invalid mem resource.\n"); + return -ENODEV; + } - gpio_bank_count = ARRAY_SIZE(omap16xx_gpio_dev); + base = ioremap(res->start, resource_size(res)); + if (unlikely(!base)) { + dev_err(&pdev->dev, "ioremap failed.\n"); + return -ENOMEM; + } + + __raw_writel(SYSCONFIG_WORD, base + OMAP1610_GPIO_SYSCONFIG); + iounmap(base); + + platform_device_register(omap16xx_gpio_dev[i]); + } return 0; } diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 5ab63eab0ff..4771d6b68b9 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -47,12 +47,13 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = { .irqstatus = OMAP_MPUIO_GPIO_INT / 2, .irqenable = OMAP_MPUIO_GPIO_MASKIT / 2, .irqenable_inv = true, + .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE >> 1, }; static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, - .bank_type = METHOD_MPUIO, - .bank_width = 32, + .is_mpuio = true, + .bank_width = 16, .bank_stride = 2, .regs = &omap7xx_mpuio_regs, }; @@ -88,11 +89,11 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = { .irqstatus = OMAP7XX_GPIO_INT_STATUS, .irqenable = OMAP7XX_GPIO_INT_MASK, .irqenable_inv = true, + .irqctrl = OMAP7XX_GPIO_INT_CONTROL, }; static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = { .virtual_irq_start = IH_GPIO_BASE, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -122,7 +123,6 @@ static struct __initdata resource omap7xx_gpio2_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = { .virtual_irq_start = IH_GPIO_BASE + 32, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -152,7 +152,6 @@ static struct __initdata resource omap7xx_gpio3_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = { .virtual_irq_start = IH_GPIO_BASE + 64, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -182,7 +181,6 @@ static struct __initdata resource omap7xx_gpio4_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = { .virtual_irq_start = IH_GPIO_BASE + 96, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -212,7 +210,6 @@ static struct __initdata resource omap7xx_gpio5_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = { .virtual_irq_start = IH_GPIO_BASE + 128, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -242,7 +239,6 @@ static struct __initdata resource omap7xx_gpio6_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = { .virtual_irq_start = IH_GPIO_BASE + 160, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -282,8 +278,6 @@ static int __init omap7xx_gpio_init(void) for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++) platform_device_register(omap7xx_gpio_dev[i]); - gpio_bank_count = ARRAY_SIZE(omap7xx_gpio_dev); - return 0; } postcore_initcall(omap7xx_gpio_init); diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index a0e3560b39d..2b28e1da14b 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -15,8 +15,12 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <asm/system_info.h> + #include <plat/cpu.h> +#include <mach/hardware.h> + #define OMAP_DIE_ID_0 0xfffe1800 #define OMAP_DIE_ID_1 0xfffe1804 #define OMAP_PRODUCTION_ID_0 0xfffe2000 diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S index bfb4fb1d738..88f08cab171 100644 --- a/arch/arm/mach-omap1/include/mach/entry-macro.S +++ b/arch/arm/mach-omap1/include/mach/entry-macro.S @@ -9,20 +9,15 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ + #include <mach/hardware.h> -#include <mach/io.h> #include <mach/irqs.h> -#include <asm/hardware/gic.h> - .macro disable_fiq - .endm +#include "../../iomap.h" .macro get_irqnr_preamble, base, tmp .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE) ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET] diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h index a3f6287b200..01e35fa106b 100644 --- a/arch/arm/mach-omap1/include/mach/hardware.h +++ b/arch/arm/mach-omap1/include/mach/hardware.h @@ -2,4 +2,40 @@ * arch/arm/mach-omap1/include/mach/hardware.h */ +#ifndef __MACH_HARDWARE_H +#define __MACH_HARDWARE_H + +#ifndef __ASSEMBLER__ +/* + * NOTE: Please use ioremap + __raw_read/write where possible instead of these + */ +extern u8 omap_readb(u32 pa); +extern u16 omap_readw(u32 pa); +extern u32 omap_readl(u32 pa); +extern void omap_writeb(u8 v, u32 pa); +extern void omap_writew(u16 v, u32 pa); +extern void omap_writel(u32 v, u32 pa); + +#include <plat/tc.h> + +/* Almost all documentation for chip and board memory maps assumes + * BM is clear. Most devel boards have a switch to control booting + * from NOR flash (using external chipselect 3) rather than mask ROM, + * which uses BM to interchange the physical CS0 and CS3 addresses. + */ +static inline u32 omap_cs0m_phys(void) +{ + return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) + ? OMAP_CS3_PHYS : 0; +} + +static inline u32 omap_cs3_phys(void) +{ + return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) + ? 0 : OMAP_CS3_PHYS; +} + +#endif +#endif + #include <plat/hardware.h> diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h deleted file mode 100644 index 57bdf74a3e6..00000000000 --- a/arch/arm/mach-omap1/include/mach/io.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/io.h - */ - -#include <plat/io.h> diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h index c6337645ba8..901082def9b 100644 --- a/arch/arm/mach-omap1/include/mach/memory.h +++ b/arch/arm/mach-omap1/include/mach/memory.h @@ -18,7 +18,8 @@ * Note that the is_lbus_device() test is not very efficient on 1510 * because of the strncmp(). */ -#ifdef CONFIG_ARCH_OMAP15XX +#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__) +#include <plat/cpu.h> /* * OMAP-1510 Local Bus address offset diff --git a/arch/arm/mach-omap1/include/mach/system.h b/arch/arm/mach-omap1/include/mach/system.h deleted file mode 100644 index a6c1b3a16df..00000000000 --- a/arch/arm/mach-omap1/include/mach/system.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/system.h - */ - -#include <plat/system.h> diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 8e55b6fb347..d969a7203d1 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -15,9 +15,12 @@ #include <asm/tlb.h> #include <asm/mach/map.h> + #include <plat/mux.h> #include <plat/tc.h> +#include "iomap.h" +#include "common.h" #include "clock.h" extern void omap_check_revision(void); @@ -118,7 +121,7 @@ void __init omap16xx_map_io(void) /* * Common low-level hardware init for omap1. */ -void omap1_init_early(void) +void __init omap1_init_early(void) { omap_check_revision(); diff --git a/arch/arm/mach-omap1/iomap.h b/arch/arm/mach-omap1/iomap.h new file mode 100644 index 00000000000..330c4716b02 --- /dev/null +++ b/arch/arm/mach-omap1/iomap.h @@ -0,0 +1,36 @@ +/* + * IO mappings for OMAP1 + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ +#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) + +/* + * ---------------------------------------------------------------------------- + * Omap1 specific IO mapping + * ---------------------------------------------------------------------------- + */ + +#define OMAP1_IO_PHYS 0xFFFB0000 +#define OMAP1_IO_SIZE 0x40000 +#define OMAP1_IO_VIRT (OMAP1_IO_PHYS - OMAP1_IO_OFFSET) diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index e5b104b7fce..4448114fab7 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -42,11 +42,13 @@ #include <linux/interrupt.h> #include <linux/io.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/irq.h> + #include <plat/cpu.h> +#include <mach/hardware.h> + #define IRQ_BANK(irq) ((irq) >> 5) #define IRQ_BIT(irq) ((irq) & 0x1f) diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index 453809359ba..86ace9aaa66 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -27,9 +27,10 @@ #include <linux/interrupt.h> #include <linux/io.h> +#include <plat/dma.h> + #include <mach/hardware.h> #include <mach/lcdc.h> -#include <plat/dma.h> int omap_lcd_dma_running(void) { @@ -117,7 +118,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); void omap_set_lcd_dma_b1_vxres(unsigned long vxres) { if (cpu_is_omap15xx()) { - printk(KERN_ERR "DMA virtual resulotion is not supported " + printk(KERN_ERR "DMA virtual resolution is not supported " "in 1510 mode\n"); BUG(); } diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index 4b818eb9f91..f6b14a14a95 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -17,7 +17,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include <asm/mach-types.h> #include <plat/fpga.h> diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c index 9b99c289462..3a066ee8d02 100644 --- a/arch/arm/mach-omap1/leds-innovator.c +++ b/arch/arm/mach-omap1/leds-innovator.c @@ -5,7 +5,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include "leds.h" diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c index da09f436497..936ed426b84 100644 --- a/arch/arm/mach-omap1/leds-osk.c +++ b/arch/arm/mach-omap1/leds-osk.c @@ -8,7 +8,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include "leds.h" diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 91f9abbd325..adf00975b9b 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -19,12 +19,15 @@ #include <linux/platform_device.h> #include <linux/slab.h> -#include <mach/irqs.h> #include <plat/dma.h> #include <plat/mux.h> #include <plat/cpu.h> #include <plat/mcbsp.h> +#include <mach/irqs.h> + +#include "iomap.h" + #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) @@ -420,18 +423,6 @@ static int __init omap1_mcbsp_init(void) return -ENODEV; if (cpu_is_omap7xx()) - omap_mcbsp_count = OMAP7XX_MCBSP_COUNT; - else if (cpu_is_omap15xx()) - omap_mcbsp_count = OMAP15XX_MCBSP_COUNT; - else if (cpu_is_omap16xx()) - omap_mcbsp_count = OMAP16XX_MCBSP_COUNT; - - mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *), - GFP_KERNEL); - if (!mcbsp_ptr) - return -ENOMEM; - - if (cpu_is_omap7xx()) omap_mcbsp_register_board_cfg(omap7xx_mcbsp_res_0, OMAP7XX_MCBSP_RES_SZ, omap7xx_mcbsp_pdata, @@ -449,7 +440,7 @@ static int __init omap1_mcbsp_init(void) omap16xx_mcbsp_pdata, OMAP16XX_MCBSP_COUNT); - return omap_mcbsp_init(); + return 0; } arch_initcall(omap1_mcbsp_init); diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 5fdef7a3482..087dba0df47 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -27,7 +27,6 @@ #include <linux/io.h> #include <linux/spinlock.h> -#include <asm/system.h> #include <plat/mux.h> diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 89ea20ca0cc..306beaca14c 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -42,14 +42,13 @@ #include <linux/sysfs.h> #include <linux/module.h> #include <linux/io.h> +#include <linux/atomic.h> #include <asm/irq.h> -#include <linux/atomic.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> #include <plat/cpu.h> -#include <mach/irqs.h> #include <plat/clock.h> #include <plat/sram.h> #include <plat/tc.h> @@ -57,6 +56,9 @@ #include <plat/dma.h> #include <plat/dmtimer.h> +#include <mach/irqs.h> + +#include "iomap.h" #include "pm.h" static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; @@ -108,13 +110,7 @@ void omap1_pm_idle(void) __u32 use_idlect1 = arm_idlect1_mask; int do_sleep = 0; - local_irq_disable(); local_fiq_disable(); - if (need_resched()) { - local_fiq_enable(); - local_irq_enable(); - return; - } #if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER) #warning Enable 32kHz OS timer in order to allow sleep states in idle @@ -157,14 +153,12 @@ void omap1_pm_idle(void) omap_writel(saved_idlect1, ARM_IDLECT1); local_fiq_enable(); - local_irq_enable(); return; } omap_sram_suspend(omap_readl(ARM_IDLECT1), omap_readl(ARM_IDLECT2)); local_fiq_enable(); - local_irq_enable(); } /* @@ -583,8 +577,6 @@ static void omap_pm_init_proc(void) #endif /* DEBUG && CONFIG_PROC_FS */ -static void (*saved_idle)(void) = NULL; - /* * omap_pm_prepare - Do preliminary suspend work. * @@ -592,8 +584,7 @@ static void (*saved_idle)(void) = NULL; static int omap_pm_prepare(void) { /* We cannot sleep in idle until we have resumed */ - saved_idle = pm_idle; - pm_idle = NULL; + disable_hlt(); return 0; } @@ -630,7 +621,7 @@ static int omap_pm_enter(suspend_state_t state) static void omap_pm_finish(void) { - pm_idle = saved_idle; + enable_hlt(); } @@ -687,7 +678,7 @@ static int __init omap_pm_init(void) return -ENODEV; } - pm_idle = omap1_pm_idle; + arm_pm_idle = omap1_pm_idle; if (cpu_is_omap7xx()) setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq); diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c index 91d199b6497..f255b153b86 100644 --- a/arch/arm/mach-omap1/reset.c +++ b/arch/arm/mach-omap1/reset.c @@ -4,9 +4,10 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <mach/hardware.h> #include <plat/prcm.h> +#include <mach/hardware.h> + void omap1_restart(char mode, const char *cmd) { /* diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index c875bdc902c..0e628743bd0 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -33,8 +33,10 @@ */ #include <linux/linkage.h> + #include <asm/assembler.h> -#include <mach/io.h> + +#include "iomap.h" #include "pm.h" .text diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S index 692587d07ea..00e9d9e9adf 100644 --- a/arch/arm/mach-omap1/sram.S +++ b/arch/arm/mach-omap1/sram.S @@ -9,10 +9,13 @@ */ #include <linux/linkage.h> + #include <asm/assembler.h> -#include <mach/io.h> + #include <mach/hardware.h> +#include "iomap.h" + .text /* diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index b8faffa44f9..4d8dd9a1b04 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -44,15 +44,15 @@ #include <linux/clockchips.h> #include <linux/io.h> -#include <asm/system.h> -#include <mach/hardware.h> #include <asm/leds.h> #include <asm/irq.h> #include <asm/sched_clock.h> +#include <mach/hardware.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> +#include "iomap.h" #include "common.h" #ifdef CONFIG_OMAP_MPU_TIMER diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 9a54ef4dcf5..325b9a0aa4a 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -46,15 +46,17 @@ #include <linux/clockchips.h> #include <linux/io.h> -#include <asm/system.h> -#include <mach/hardware.h> #include <asm/leds.h> #include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> -#include "common.h" + #include <plat/dmtimer.h> +#include <mach/hardware.h> + +#include "common.h" + /* * --------------------------------------------------------------------------- * 32KHz OS timer |