1 files changed, 34 insertions, 42 deletions

diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index ce812decfac..23b004afa3f 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -35,7 +35,7 @@
 #include "common.h"
 #include <linux/omap-dma.h>
 #include <video/omapdss.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
 
 #include "gpmc.h"
 #include "gpmc-smc91x.h"
@@ -108,53 +108,38 @@ static struct twl4030_keypad_data sdp3430_kp_data = {
 #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO	8
 #define SDP3430_LCD_PANEL_ENABLE_GPIO		5
 
-static struct gpio sdp3430_dss_gpios[] __initdata = {
-	{SDP3430_LCD_PANEL_ENABLE_GPIO,    GPIOF_OUT_INIT_LOW, "LCD reset"    },
-	{SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"},
-};
-
 static void __init sdp3430_display_init(void)
 {
 	int r;
 
-	r = gpio_request_array(sdp3430_dss_gpios,
-			       ARRAY_SIZE(sdp3430_dss_gpios));
+	/*
+	 * the backlight GPIO doesn't directly go to the panel, it enables
+	 * an internal circuit on 3430sdp to create the signal V_BKL_28V,
+	 * this is connected to LED+ pin of the sharp panel. This GPIO
+	 * is left enabled in the board file, and not passed to the panel
+	 * as platform_data.
+	 */
+	r = gpio_request_one(SDP3430_LCD_PANEL_BACKLIGHT_GPIO,
+				GPIOF_OUT_INIT_HIGH, "LCD Backlight");
 	if (r)
-		printk(KERN_ERR "failed to get LCD control GPIOs\n");
-
-}
-
-static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1);
-	gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1);
+		pr_err("failed to get LCD Backlight GPIO\n");
 
-	return 0;
-}
-
-static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-	gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0);
-	gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0);
-}
-
-static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
-{
-	return 0;
-}
-
-static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev)
-{
 }
 
+static struct panel_sharp_ls037v7dw01_data sdp3430_lcd_data = {
+	.resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO,
+	.ini_gpio = -1,
+	.mo_gpio = -1,
+	.lr_gpio = -1,
+	.ud_gpio = -1,
+};
 
 static struct omap_dss_device sdp3430_lcd_device = {
 	.name			= "lcd",
 	.driver_name		= "sharp_ls_panel",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.phy.dpi.data_lines	= 16,
-	.platform_enable	= sdp3430_panel_enable_lcd,
-	.platform_disable	= sdp3430_panel_disable_lcd,
+	.data			= &sdp3430_lcd_data,
 };
 
 static struct tfp410_platform_data dvi_panel = {
@@ -175,8 +160,6 @@ static struct omap_dss_device sdp3430_tv_device = {
 	.driver_name		= "venc",
 	.type			= OMAP_DISPLAY_TYPE_VENC,
 	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
-	.platform_enable	= sdp3430_panel_enable_tv,
-	.platform_disable	= sdp3430_panel_disable_tv,
 };
 
 
@@ -445,16 +428,23 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
+static struct usbhs_phy_data phy_data[] __initdata = {
+	{
+		.port = 1,
+		.reset_gpio = 57,
+		.vcc_gpio = -EINVAL,
+	},
+	{
+		.port = 2,
+		.reset_gpio = 61,
+		.vcc_gpio = -EINVAL,
+	},
+};
+
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = 57,
-	.reset_gpio_port[1]  = 61,
-	.reset_gpio_port[2]  = -EINVAL
 };
 
 #ifdef CONFIG_OMAP_MUX
@@ -606,6 +596,8 @@ static void __init omap_3430sdp_init(void)
 	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
 	sdp3430_display_init();
 	enable_board_wakeup_source();
+
+	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
 	usbhs_init(&usbhs_bdata);
 }