summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-3630sdp.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/board-3630sdp.c')
-rw-r--r--arch/arm/mach-omap2/board-3630sdp.c225
1 files changed, 0 insertions, 225 deletions
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
deleted file mode 100644
index 20d6d818924..00000000000
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/mtd/nand.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "gpmc-smc91x.h"
-
-#include "board-zoom.h"
-
-#include "board-flash.h"
-#include "mux.h"
-#include "sdram-hynix-h8mbx00u0mer-0em.h"
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-
-static struct omap_smc91x_platform_data board_smc91x_data = {
- .cs = 3,
- .flags = GPMC_MUX_ADD_DATA | IORESOURCE_IRQ_LOWLEVEL,
-};
-
-static void __init board_smc91x_init(void)
-{
- board_smc91x_data.gpio_irq = 158;
- gpmc_smc91x_init(&board_smc91x_data);
-}
-
-#else
-
-static inline void board_smc91x_init(void)
-{
-}
-
-#endif /* defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) */
-
-static void enable_board_wakeup_source(void)
-{
- /* T2 interrupt line (keypad) */
- omap_mux_init_signal("sys_nirq",
- OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
- {
- .port = 1,
- .reset_gpio = 126,
- .vcc_gpio = -EINVAL,
- },
- {
- .port = 2,
- .reset_gpio = 61,
- .vcc_gpio = -EINVAL,
- },
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
- { .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-/*
- * SDP3630 CS organization
- * See also the Switch S8 settings in the comments.
- */
-static char chip_sel_sdp[][GPMC_CS_NUM] = {
- {PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
- {PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
- {PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
-};
-
-static struct mtd_partition sdp_nor_partitions[] = {
- /* bootloader (U-Boot, etc) in first sector */
- {
- .name = "Bootloader-NOR",
- .offset = 0,
- .size = SZ_256K,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- /* bootloader params in the next sector */
- {
- .name = "Params-NOR",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_256K,
- .mask_flags = 0,
- },
- /* kernel */
- {
- .name = "Kernel-NOR",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- .mask_flags = 0
- },
- /* file system */
- {
- .name = "Filesystem-NOR",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0
- }
-};
-
-static struct mtd_partition sdp_onenand_partitions[] = {
- {
- .name = "X-Loader-OneNAND",
- .offset = 0,
- .size = 4 * (64 * 2048),
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },
- {
- .name = "U-Boot-OneNAND",
- .offset = MTDPART_OFS_APPEND,
- .size = 2 * (64 * 2048),
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },
- {
- .name = "U-Boot Environment-OneNAND",
- .offset = MTDPART_OFS_APPEND,
- .size = 1 * (64 * 2048),
- },
- {
- .name = "Kernel-OneNAND",
- .offset = MTDPART_OFS_APPEND,
- .size = 16 * (64 * 2048),
- },
- {
- .name = "File System-OneNAND",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct mtd_partition sdp_nand_partitions[] = {
- /* All the partition sizes are listed in terms of NAND block size */
- {
- .name = "X-Loader-NAND",
- .offset = 0,
- .size = 4 * (64 * 2048),
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "U-Boot-NAND",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
- .size = 10 * (64 * 2048),
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "Boot Env-NAND",
-
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */
- .size = 6 * (64 * 2048),
- },
- {
- .name = "Kernel-NAND",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
- .size = 40 * (64 * 2048),
- },
- {
- .name = "File System - NAND",
- .size = MTDPART_SIZ_FULL,
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x780000 */
- },
-};
-
-static struct flash_partitions sdp_flash_partitions[] = {
- {
- .parts = sdp_nor_partitions,
- .nr_parts = ARRAY_SIZE(sdp_nor_partitions),
- },
- {
- .parts = sdp_onenand_partitions,
- .nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
- },
- {
- .parts = sdp_nand_partitions,
- .nr_parts = ARRAY_SIZE(sdp_nand_partitions),
- },
-};
-
-static void __init omap_sdp_init(void)
-{
- omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
- zoom_peripherals_init();
- omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
- h8mbx00u0mer0em_sdrc_params);
- zoom_display_init();
- board_smc91x_init();
- board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
- enable_board_wakeup_source();
-
- usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
- usbhs_init(&usbhs_bdata);
-}
-
-MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap3_map_io,
- .init_early = omap3630_init_early,
- .init_irq = omap3_init_irq,
- .handle_irq = omap3_intc_handle_irq,
- .init_machine = omap_sdp_init,
- .init_late = omap3630_init_late,
- .init_time = omap3_sync32k_timer_init,
- .restart = omap3xxx_restart,
-MACHINE_END