diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-4430sdp.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-4430sdp.c | 111 |
1 files changed, 89 insertions, 22 deletions
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 12d99e582cd..1a943be822c 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -35,6 +35,7 @@ #include <plat/common.h> #include <plat/usb.h> #include <plat/mmc.h> +#include <plat/omap4-keypad.h> #include "mux.h" #include "hsmmc.h" @@ -44,10 +45,93 @@ #define ETH_KS8851_IRQ 34 #define ETH_KS8851_POWER_ON 48 #define ETH_KS8851_QUART 138 -#define OMAP4SDP_MDM_PWR_EN_GPIO 157 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 #define OMAP4_SFH7741_ENABLE_GPIO 188 +static const int sdp4430_keymap[] = { + KEY(0, 0, KEY_E), + KEY(0, 1, KEY_R), + KEY(0, 2, KEY_T), + KEY(0, 3, KEY_HOME), + KEY(0, 4, KEY_F5), + KEY(0, 5, KEY_UNKNOWN), + KEY(0, 6, KEY_I), + KEY(0, 7, KEY_LEFTSHIFT), + + KEY(1, 0, KEY_D), + KEY(1, 1, KEY_F), + KEY(1, 2, KEY_G), + KEY(1, 3, KEY_SEND), + KEY(1, 4, KEY_F6), + KEY(1, 5, KEY_UNKNOWN), + KEY(1, 6, KEY_K), + KEY(1, 7, KEY_ENTER), + + KEY(2, 0, KEY_X), + KEY(2, 1, KEY_C), + KEY(2, 2, KEY_V), + KEY(2, 3, KEY_END), + KEY(2, 4, KEY_F7), + KEY(2, 5, KEY_UNKNOWN), + KEY(2, 6, KEY_DOT), + KEY(2, 7, KEY_CAPSLOCK), + + KEY(3, 0, KEY_Z), + KEY(3, 1, KEY_KPPLUS), + KEY(3, 2, KEY_B), + KEY(3, 3, KEY_F1), + KEY(3, 4, KEY_F8), + KEY(3, 5, KEY_UNKNOWN), + KEY(3, 6, KEY_O), + KEY(3, 7, KEY_SPACE), + + KEY(4, 0, KEY_W), + KEY(4, 1, KEY_Y), + KEY(4, 2, KEY_U), + KEY(4, 3, KEY_F2), + KEY(4, 4, KEY_VOLUMEUP), + KEY(4, 5, KEY_UNKNOWN), + KEY(4, 6, KEY_L), + KEY(4, 7, KEY_LEFT), + + KEY(5, 0, KEY_S), + KEY(5, 1, KEY_H), + KEY(5, 2, KEY_J), + KEY(5, 3, KEY_F3), + KEY(5, 4, KEY_F9), + KEY(5, 5, KEY_VOLUMEDOWN), + KEY(5, 6, KEY_M), + KEY(5, 7, KEY_RIGHT), + + KEY(6, 0, KEY_Q), + KEY(6, 1, KEY_A), + KEY(6, 2, KEY_N), + KEY(6, 3, KEY_BACK), + KEY(6, 4, KEY_BACKSPACE), + KEY(6, 5, KEY_UNKNOWN), + KEY(6, 6, KEY_P), + KEY(6, 7, KEY_UP), + + KEY(7, 0, KEY_PROG1), + KEY(7, 1, KEY_PROG2), + KEY(7, 2, KEY_PROG3), + KEY(7, 3, KEY_PROG4), + KEY(7, 4, KEY_F4), + KEY(7, 5, KEY_UNKNOWN), + KEY(7, 6, KEY_OK), + KEY(7, 7, KEY_DOWN), +}; + +static struct matrix_keymap_data sdp4430_keymap_data = { + .keymap = sdp4430_keymap, + .keymap_size = ARRAY_SIZE(sdp4430_keymap), +}; + +static struct omap4_keypad_platform_data sdp4430_keypad_data = { + .keymap_data = &sdp4430_keymap_data, + .rows = 8, + .cols = 8, +}; static struct gpio_led sdp4430_gpio_leds[] = { { .name = "omap4:green:debug0", @@ -250,16 +334,6 @@ static void __init omap_4430sdp_init_early(void) #endif } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .phy_reset = false, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL, -}; - static struct omap_musb_board_data musb_board_data = { .interface_type = MUSB_INTERFACE_UTMI, .mode = MUSB_OTG, @@ -433,7 +507,6 @@ static struct regulator_init_data sdp4430_vana = { .constraints = { .min_uV = 2100000, .max_uV = 2100000, - .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE @@ -445,7 +518,6 @@ static struct regulator_init_data sdp4430_vcxio = { .constraints = { .min_uV = 1800000, .max_uV = 1800000, - .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE @@ -457,7 +529,6 @@ static struct regulator_init_data sdp4430_vdac = { .constraints = { .min_uV = 1800000, .max_uV = 1800000, - .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE @@ -575,14 +646,6 @@ static void __init omap_4430sdp_init(void) omap_serial_init(); omap4_twl6030_hsmmc_init(mmc); - /* Power on the ULPI PHY */ - status = gpio_request(OMAP4SDP_MDM_PWR_EN_GPIO, "USBB1 PHY VMDM_3V3"); - if (status) - pr_err("%s: Could not get USBB1 PHY GPIO\n", __func__); - else - gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1); - - usb_ehci_init(&ehci_pdata); usb_musb_init(&musb_board_data); status = omap_ethernet_init(); @@ -593,6 +656,10 @@ static void __init omap_4430sdp_init(void) spi_register_board_info(sdp4430_spi_board_info, ARRAY_SIZE(sdp4430_spi_board_info)); } + + status = omap4_keyboard_init(&sdp4430_keypad_data); + if (status) + pr_err("Keypad initialization failed: %d\n", status); } static void __init omap_4430sdp_map_io(void) |