diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-4430sdp.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-4430sdp.c | 104 |
1 files changed, 20 insertions, 84 deletions
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 515646886b5..39fba9df17f 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -27,13 +27,13 @@ #include <linux/leds_pwm.h> #include <mach/hardware.h> -#include <mach/omap4-common.h> +#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/usb.h> #include <plat/mmc.h> #include <plat/omap4-keypad.h> @@ -372,11 +372,17 @@ static struct platform_device sdp4430_vbat = { }, }; +static struct platform_device sdp4430_dmic_codec = { + .name = "dmic-codec", + .id = -1, +}; + static struct platform_device *sdp4430_devices[] __initdata = { &sdp4430_gpio_keys_device, &sdp4430_leds_gpio, &sdp4430_leds_pwm, &sdp4430_vbat, + &sdp4430_dmic_codec, }; static struct omap_musb_board_data musb_board_data = { @@ -404,6 +410,7 @@ static struct omap2_hsmmc_info mmc[] = { { .mmc = 5, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, + .pm_caps = MMC_PM_KEEP_POWER, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .ocr_mask = MMC_VDD_165_195, @@ -595,20 +602,6 @@ static void __init omap_sfh7741prox_init(void) __func__, OMAP4_SFH7741_ENABLE_GPIO, error); } -static void sdp4430_hdmi_mux_init(void) -{ - /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ - omap_mux_init_signal("hdmi_hpd", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_cec", - OMAP_PIN_INPUT_PULLUP); - /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ - omap_mux_init_signal("hdmi_ddc_scl", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_ddc_sda", - OMAP_PIN_INPUT_PULLUP); -} - static struct gpio sdp4430_hdmi_gpios[] = { { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, @@ -826,9 +819,16 @@ static void omap_4430sdp_display_init(void) pr_err("%s: Could not get display_sel GPIO\n", __func__); sdp4430_lcd_init(); - sdp4430_hdmi_mux_init(); sdp4430_picodlp_init(); omap_display_init(&sdp4430_dss_data); + /* + * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and + * later have external pull up on the HDMI I2C lines + */ + if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) + omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); + else + omap_hdmi_init(0); } #ifdef CONFIG_OMAP_MUX @@ -837,74 +837,8 @@ static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; -static struct omap_device_pad serial2_pads[] __initdata = { - OMAP_MUX_STATIC("uart2_cts.uart2_cts", - OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_rts.uart2_rts", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_rx.uart2_rx", - OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_tx.uart2_tx", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), -}; - -static struct omap_device_pad serial3_pads[] __initdata = { - OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx", - OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx", - OMAP_PIN_INPUT | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), -}; - -static struct omap_device_pad serial4_pads[] __initdata = { - OMAP_MUX_STATIC("uart4_rx.uart4_rx", - OMAP_PIN_INPUT | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart4_tx.uart4_tx", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), -}; - -static struct omap_board_data serial2_data __initdata = { - .id = 1, - .pads = serial2_pads, - .pads_cnt = ARRAY_SIZE(serial2_pads), -}; - -static struct omap_board_data serial3_data __initdata = { - .id = 2, - .pads = serial3_pads, - .pads_cnt = ARRAY_SIZE(serial3_pads), -}; - -static struct omap_board_data serial4_data __initdata = { - .id = 3, - .pads = serial4_pads, - .pads_cnt = ARRAY_SIZE(serial4_pads), -}; - -static inline void board_serial_init(void) -{ - struct omap_board_data bdata; - bdata.flags = 0; - bdata.pads = NULL; - bdata.pads_cnt = 0; - bdata.id = 0; - /* pass dummy data for UART1 */ - omap_serial_init_port(&bdata); - - omap_serial_init_port(&serial2_data); - omap_serial_init_port(&serial3_data); - omap_serial_init_port(&serial4_data); -} #else #define board_mux NULL - -static inline void board_serial_init(void) -{ - omap_serial_init(); -} #endif static void omap4_sdp4430_wifi_mux_init(void) @@ -954,7 +888,7 @@ static void __init omap_4430sdp_init(void) omap4_i2c_init(); omap_sfh7741prox_init(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); - board_serial_init(); + omap_serial_init(); omap_sdrc_init(NULL, NULL); omap4_sdp4430_wifi_init(); omap4_twl6030_hsmmc_init(mmc); @@ -984,6 +918,8 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") .map_io = omap4_map_io, .init_early = omap4430_init_early, .init_irq = gic_init_irq, + .handle_irq = gic_handle_irq, .init_machine = omap_4430sdp_init, .timer = &omap4_timer, + .restart = omap_prcm_restart, MACHINE_END |