diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-am3517evm.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-am3517evm.c | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index f85c8da17e8..d547036aff3 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -375,6 +375,31 @@ static void __init am3517_evm_init_irq(void) omap_gpio_init(); } +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 500, +}; + +static __init void am3517_evm_musb_init(void) +{ + u32 devconf2; + + /* + * Set up USB clock/mode in the DEVCONF2 register. + */ + devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2); + + /* USB2.0 PHY reference clock is 13 MHz */ + devconf2 &= ~(CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE); + devconf2 |= CONF2_REFFREQ_13MHZ | CONF2_SESENDEN | CONF2_VBDTCTEN + | CONF2_DATPOL; + + omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); + + usb_musb_init(&musb_board_data); +} + static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ @@ -393,6 +418,8 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* USB OTG DRVVBUS offset = 0x212 */ + OMAP3_MUX(SAD2D_MCAD23, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else @@ -459,6 +486,9 @@ static void __init am3517_evm_init(void) ARRAY_SIZE(am3517evm_i2c1_boardinfo)); /*Ethernet*/ am3517_evm_ethernet_init(&am3517_evm_emac_pdata); + + /* MUSB */ + am3517_evm_musb_init(); } MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") |