diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-cm-t35.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-cm-t35.c | 53 |
1 files changed, 21 insertions, 32 deletions
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index dac14161066..7b5647954c1 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -401,14 +401,6 @@ static struct omap_dss_board_info cm_t35_dss_data = { .default_device = &cm_t35_dvi_device, }; -static struct platform_device cm_t35_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &cm_t35_dss_data, - }, -}; - static struct omap2_mcspi_device_config tdo24m_mcspi_config = { .turbo_mode = 0, .single_channel = 1, /* 0: slave, 1: master */ @@ -468,7 +460,7 @@ static void __init cm_t35_init_display(void) msleep(50); gpio_set_value(lcd_en_gpio, 1); - err = platform_device_register(&cm_t35_dss_device); + err = omap_display_init(&cm_t35_dss_data); if (err) { pr_err("CM-T35: failed to register DSS device\n"); goto err_dev_reg; @@ -495,15 +487,11 @@ static struct regulator_consumer_supply cm_t35_vsim_supply = { .supply = "vmmc_aux", }; -static struct regulator_consumer_supply cm_t35_vdac_supply = { - .supply = "vdda_dac", - .dev = &cm_t35_dss_device.dev, -}; +static struct regulator_consumer_supply cm_t35_vdac_supply = + REGULATOR_SUPPLY("vdda_dac", "omapdss"); -static struct regulator_consumer_supply cm_t35_vdvi_supply = { - .supply = "vdvi", - .dev = &cm_t35_dss_device.dev, -}; +static struct regulator_consumer_supply cm_t35_vdvi_supply = + REGULATOR_SUPPLY("vdvi", "omapdss"); /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data cm_t35_vmmc1 = { @@ -605,10 +593,10 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static struct usbhs_omap_board_data usbhs_bdata __initdata = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = OMAP_MAX_GPIO_LINES + 6, @@ -680,20 +668,14 @@ static void __init cm_t35_init_i2c(void) ARRAY_SIZE(cm_t35_i2c_boardinfo)); } -static struct omap_board_config_kernel cm_t35_config[] __initdata = { -}; - -static void __init cm_t35_init_irq(void) +static void __init cm_t35_init_early(void) { - omap_board_config = cm_t35_config; - omap_board_config_size = ARRAY_SIZE(cm_t35_config); - omap2_init_common_infrastructure(); omap2_init_common_devices(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); - omap_init_irq(); } +#ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { /* nCS and IRQ for CM-T35 ethernet */ OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0), @@ -791,6 +773,7 @@ static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; +#endif static struct omap_musb_board_data musb_board_data = { .interface_type = MUSB_INTERFACE_ULPI, @@ -798,8 +781,13 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; +static struct omap_board_config_kernel cm_t35_config[] __initdata = { +}; + static void __init cm_t35_init(void) { + omap_board_config = cm_t35_config; + omap_board_config_size = ARRAY_SIZE(cm_t35_config); omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); cm_t35_init_i2c(); @@ -810,14 +798,15 @@ static void __init cm_t35_init(void) cm_t35_init_display(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); } MACHINE_START(CM_T35, "Compulab CM-T35") .boot_params = 0x80000100, - .map_io = omap3_map_io, .reserve = omap_reserve, - .init_irq = cm_t35_init_irq, + .map_io = omap3_map_io, + .init_early = cm_t35_init_early, + .init_irq = omap_init_irq, .init_machine = cm_t35_init, .timer = &omap_timer, MACHINE_END |