summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-devkit8000.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/board-devkit8000.c')
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c169
1 files changed, 74 insertions, 95 deletions
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 922b7464807..a07086d6a0b 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -33,6 +33,7 @@
#include <linux/i2c/twl.h>
#include <mach/hardware.h>
+#include <mach/id.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -58,9 +59,6 @@
#include "mux.h"
#include "hsmmc.h"
-#define GPMC_CS0_BASE 0x60
-#define GPMC_CS_SIZE 0x30
-
#define NAND_BLOCK_SIZE SZ_128K
#define OMAP_DM9000_GPIO_IRQ 25
@@ -104,20 +102,6 @@ static struct omap_nand_platform_data devkit8000_nand_data = {
.dma_channel = -1, /* disable DMA in OMAP NAND driver */
};
-static struct resource devkit8000_nand_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device devkit8000_nand_device = {
- .name = "omap2-nand",
- .id = -1,
- .dev = {
- .platform_data = &devkit8000_nand_data,
- },
- .num_resources = 1,
- .resource = &devkit8000_nand_resource,
-};
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -126,54 +110,50 @@ static struct omap2_hsmmc_info mmc[] = {
},
{} /* Terminator */
};
-static struct omap_board_config_kernel devkit8000_config[] __initdata = {
-};
static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
{
twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
+ if (gpio_is_valid(dssdev->reset_gpio))
+ gpio_set_value(dssdev->reset_gpio, 1);
return 0;
}
static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
{
+ if (gpio_is_valid(dssdev->reset_gpio))
+ gpio_set_value(dssdev->reset_gpio, 0);
}
+
static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
{
+ if (gpio_is_valid(dssdev->reset_gpio))
+ gpio_set_value(dssdev->reset_gpio, 1);
return 0;
}
static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
{
+ if (gpio_is_valid(dssdev->reset_gpio))
+ gpio_set_value(dssdev->reset_gpio, 0);
}
-static int devkit8000_panel_enable_tv(struct omap_dss_device *dssdev)
-{
+static struct regulator_consumer_supply devkit8000_vmmc1_supply =
+ REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
- return 0;
-}
-
-static void devkit8000_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
-
-static struct regulator_consumer_supply devkit8000_vmmc1_supply = {
- .supply = "vmmc",
-};
-
-static struct regulator_consumer_supply devkit8000_vsim_supply = {
- .supply = "vmmc_aux",
-};
+/* ads7846 on SPI */
+static struct regulator_consumer_supply devkit8000_vio_supply =
+ REGULATOR_SUPPLY("vcc", "spi2.0");
static struct omap_dss_device devkit8000_lcd_device = {
.name = "lcd",
- .driver_name = "innolux_at_panel",
+ .driver_name = "generic_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
+ .reset_gpio = -EINVAL, /* will be replaced */
.platform_enable = devkit8000_panel_enable_lcd,
.platform_disable = devkit8000_panel_disable_lcd,
};
@@ -182,6 +162,7 @@ static struct omap_dss_device devkit8000_dvi_device = {
.driver_name = "generic_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
+ .reset_gpio = -EINVAL, /* will be replaced */
.platform_enable = devkit8000_panel_enable_dvi,
.platform_disable = devkit8000_panel_disable_dvi,
};
@@ -191,8 +172,6 @@ static struct omap_dss_device devkit8000_tv_device = {
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .platform_enable = devkit8000_panel_enable_tv,
- .platform_disable = devkit8000_panel_disable_tv,
};
@@ -216,10 +195,8 @@ static struct platform_device devkit8000_dss_device = {
},
};
-static struct regulator_consumer_supply devkit8000_vdda_dac_supply = {
- .supply = "vdda_dac",
- .dev = &devkit8000_dss_device.dev,
-};
+static struct regulator_consumer_supply devkit8000_vdda_dac_supply =
+ REGULATOR_SUPPLY("vdda_dac", "omapdss");
static int board_keymap[] = {
KEY(0, 0, KEY_1),
@@ -266,7 +243,21 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
/* link regulators to MMC adapters */
devkit8000_vmmc1_supply.dev = mmc[0].dev;
- devkit8000_vsim_supply.dev = mmc[0].dev;
+
+ /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+ /* gpio + 1 is "LCD_PWREN" (out, active high) */
+ devkit8000_lcd_device.reset_gpio = gpio + 1;
+ gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN");
+ /* Disable until needed */
+ gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0);
+
+ /* gpio + 7 is "DVI_PD" (out, active low) */
+ devkit8000_dvi_device.reset_gpio = gpio + 7;
+ gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown");
+ /* Disable until needed */
+ gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0);
return 0;
}
@@ -282,16 +273,8 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
.setup = devkit8000_twl_gpio_setup,
};
-static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = {
- {
- .supply = "vdvi",
- .dev = &devkit8000_lcd_device.dev,
- },
- {
- .supply = "vdds_dsi",
- .dev = &devkit8000_dss_device.dev,
- }
-};
+static struct regulator_consumer_supply devkit8000_vpll1_supply =
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss");
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
static struct regulator_init_data devkit8000_vmmc1 = {
@@ -308,21 +291,6 @@ static struct regulator_init_data devkit8000_vmmc1 = {
.consumer_supplies = &devkit8000_vmmc1_supply,
};
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data devkit8000_vsim = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &devkit8000_vsim_supply,
-};
-
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data devkit8000_vdac = {
.constraints = {
@@ -337,10 +305,9 @@ static struct regulator_init_data devkit8000_vdac = {
.consumer_supplies = &devkit8000_vdda_dac_supply,
};
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data devkit8000_vpll2 = {
+/* VPLL1 for digital video outputs */
+static struct regulator_init_data devkit8000_vpll1 = {
.constraints = {
- .name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
@@ -348,8 +315,23 @@ static struct regulator_init_data devkit8000_vpll2 = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = ARRAY_SIZE(devkit8000_vpll2_supplies),
- .consumer_supplies = devkit8000_vpll2_supplies,
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &devkit8000_vpll1_supply,
+};
+
+/* VAUX4 for ads7846 and nubs */
+static struct regulator_init_data devkit8000_vio = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &devkit8000_vio_supply,
};
static struct twl4030_usb_data devkit8000_usb_data = {
@@ -374,15 +356,15 @@ static struct twl4030_platform_data devkit8000_twldata = {
.gpio = &devkit8000_gpio_data,
.codec = &devkit8000_codec_data,
.vmmc1 = &devkit8000_vmmc1,
- .vsim = &devkit8000_vsim,
.vdac = &devkit8000_vdac,
- .vpll2 = &devkit8000_vpll2,
+ .vpll1 = &devkit8000_vpll1,
+ .vio = &devkit8000_vio,
.keypad = &devkit8000_kp_data,
};
static struct i2c_board_info __initdata devkit8000_i2c_boardinfo[] = {
{
- I2C_BOARD_INFO("twl4030", 0x48),
+ I2C_BOARD_INFO("tps65930", 0x48),
.flags = I2C_CLIENT_WAKE,
.irq = INT_34XX_SYS_NIRQ,
.platform_data = &devkit8000_twldata,
@@ -464,8 +446,6 @@ static struct platform_device keys_gpio = {
static void __init devkit8000_init_irq(void)
{
- omap_board_config = devkit8000_config;
- omap_board_config_size = ARRAY_SIZE(devkit8000_config);
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
@@ -560,6 +540,9 @@ static struct platform_device omap_dm9000_dev = {
static void __init omap_dm9000_init(void)
{
+ unsigned char *eth_addr = omap_dm9000_platdata.dev_addr;
+ struct omap_die_id odi;
+
if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) {
printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n",
OMAP_DM9000_GPIO_IRQ);
@@ -567,6 +550,16 @@ static void __init omap_dm9000_init(void)
}
gpio_direction_input(OMAP_DM9000_GPIO_IRQ);
+
+ /* init the mac address using DIE id */
+ omap_get_die_id(&odi);
+
+ eth_addr[0] = 0x02; /* locally administered */
+ eth_addr[1] = odi.id_1 & 0xff;
+ eth_addr[2] = (odi.id_0 & 0xff000000) >> 24;
+ eth_addr[3] = (odi.id_0 & 0x00ff0000) >> 16;
+ eth_addr[4] = (odi.id_0 & 0x0000ff00) >> 8;
+ eth_addr[5] = (odi.id_0 & 0x000000ff);
}
static struct platform_device *devkit8000_devices[] __initdata = {
@@ -581,8 +574,6 @@ static void __init devkit8000_flash_init(void)
u8 cs = 0;
u8 nandcs = GPMC_CS_NUM + 1;
- u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
/* find out the chip-select on which NAND exists */
while (cs < GPMC_CS_NUM) {
u32 ret = 0;
@@ -604,13 +595,9 @@ static void __init devkit8000_flash_init(void)
if (nandcs < GPMC_CS_NUM) {
devkit8000_nand_data.cs = nandcs;
- devkit8000_nand_data.gpmc_cs_baseaddr = (void *)
- (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
- devkit8000_nand_data.gpmc_baseaddr = (void *)
- (gpmc_base_add);
printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
- if (platform_device_register(&devkit8000_nand_device) < 0)
+ if (gpmc_nand_init(&devkit8000_nand_data) < 0)
printk(KERN_ERR "Unable to register NAND device\n");
}
}
@@ -797,8 +784,6 @@ static void __init devkit8000_init(void)
devkit8000_i2c_init();
platform_add_devices(devkit8000_devices,
ARRAY_SIZE(devkit8000_devices));
- omap_board_config = devkit8000_config;
- omap_board_config_size = ARRAY_SIZE(devkit8000_config);
spi_register_board_info(devkit8000_spi_board_info,
ARRAY_SIZE(devkit8000_spi_board_info));
@@ -814,17 +799,11 @@ static void __init devkit8000_init(void)
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
-static void __init devkit8000_map_io(void)
-{
- omap2_set_globals_343x();
- omap34xx_map_common_io();
-}
-
MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
- .map_io = devkit8000_map_io,
+ .map_io = omap3_map_io,
.reserve = omap_reserve,
.init_irq = devkit8000_init_irq,
.init_machine = devkit8000_init,