diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-devkit8000.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-devkit8000.c | 30 |
1 files changed, 5 insertions, 25 deletions
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index a2010f07de3..b063f0d2faa 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -47,7 +47,7 @@ #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/mcspi.h> #include <linux/input/matrix_keypad.h> @@ -118,19 +118,6 @@ static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev) gpio_set_value_cansleep(dssdev->reset_gpio, 0); } -static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value_cansleep(dssdev->reset_gpio, 1); - return 0; -} - -static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value_cansleep(dssdev->reset_gpio, 0); -} - static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; @@ -154,15 +141,14 @@ static struct omap_dss_device devkit8000_lcd_device = { .phy.dpi.data_lines = 24, }; -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = devkit8000_panel_enable_dvi, - .platform_disable = devkit8000_panel_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = -1, }; static struct omap_dss_device devkit8000_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; @@ -244,13 +230,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev, } /* gpio + 7 is "DVI_PD" (out, active low) */ - devkit8000_dvi_device.reset_gpio = gpio + 7; - ret = gpio_request_one(devkit8000_dvi_device.reset_gpio, - GPIOF_OUT_INIT_LOW, "DVI PowerDown"); - if (ret < 0) { - devkit8000_dvi_device.reset_gpio = -EINVAL; - printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n"); - } + dvi_panel.power_down_gpio = gpio + 7; return 0; } |