summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-h4.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/board-h4.c')
-rw-r--r--arch/arm/mach-omap2/board-h4.c197
1 files changed, 197 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
new file mode 100644
index 00000000000..f2554469a76
--- /dev/null
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -0,0 +1,197 @@
+/*
+ * linux/arch/arm/mach-omap/omap2/board-h4.c
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *
+ * Modified from mach-omap/omap1/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+#include <asm/arch/prcm.h>
+
+#include <asm/io.h>
+#include <asm/delay.h>
+
+static struct mtd_partition h4_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct flash_platform_data h4_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+ .parts = h4_partitions,
+ .nr_parts = ARRAY_SIZE(h4_partitions),
+};
+
+static struct resource h4_flash_resource = {
+ .start = H4_CS0_BASE,
+ .end = H4_CS0_BASE + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device h4_flash_device = {
+ .name = "omapflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &h4_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &h4_flash_resource,
+};
+
+static struct resource h4_smc91x_resources[] = {
+ [0] = {
+ .start = OMAP24XX_ETHR_START, /* Physical */
+ .end = OMAP24XX_ETHR_START + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
+ .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device h4_smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(h4_smc91x_resources),
+ .resource = h4_smc91x_resources,
+};
+
+static struct platform_device *h4_devices[] __initdata = {
+ &h4_smc91x_device,
+ &h4_flash_device,
+};
+
+static inline void __init h4_init_smc91x(void)
+{
+ /* Make sure CS1 timings are correct */
+ GPMC_CONFIG1_1 = 0x00011200;
+ GPMC_CONFIG2_1 = 0x001f1f01;
+ GPMC_CONFIG3_1 = 0x00080803;
+ GPMC_CONFIG4_1 = 0x1c091c09;
+ GPMC_CONFIG5_1 = 0x041f1f1f;
+ GPMC_CONFIG6_1 = 0x000004c4;
+ GPMC_CONFIG7_1 = 0x00000f40 | (0x08000000 >> 24);
+ udelay(100);
+
+ omap_cfg_reg(M15_24XX_GPIO92);
+ if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
+ OMAP24XX_ETHR_GPIO_IRQ);
+ return;
+ }
+ omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1);
+}
+
+static void __init omap_h4_init_irq(void)
+{
+ omap_init_irq();
+ omap_gpio_init();
+ h4_init_smc91x();
+}
+
+static struct omap_uart_config h4_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_mmc_config h4_mmc_config __initdata = {
+ .mmc [0] = {
+ .enabled = 1,
+ .wire4 = 1,
+ .wp_pin = -1,
+ .power_pin = -1,
+ .switch_pin = -1,
+ },
+};
+
+static struct omap_lcd_config h4_lcd_config __initdata = {
+ .panel_name = "h4",
+ .ctrl_name = "internal",
+};
+
+static struct omap_board_config_kernel h4_config[] = {
+ { OMAP_TAG_UART, &h4_uart_config },
+ { OMAP_TAG_MMC, &h4_mmc_config },
+ { OMAP_TAG_LCD, &h4_lcd_config },
+};
+
+static void __init omap_h4_init(void)
+{
+ /*
+ * Make sure the serial ports are muxed on at this point.
+ * You have to mux them off in device drivers later on
+ * if not needed.
+ */
+ platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
+ omap_board_config = h4_config;
+ omap_board_config_size = ARRAY_SIZE(h4_config);
+ omap_serial_init();
+}
+
+static void __init omap_h4_map_io(void)
+{
+ omap_map_common_io();
+}
+
+MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
+ /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
+ .phys_ram = 0x80000000,
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_h4_map_io,
+ .init_irq = omap_h4_init_irq,
+ .init_machine = omap_h4_init,
+ .timer = &omap_timer,
+MACHINE_END