diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-omap3beagle.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3beagle.c | 32 |
1 files changed, 11 insertions, 21 deletions
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 9cc9fa9315d..4a71cb7e42d 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -42,7 +42,7 @@ #include <plat/board.h> #include <plat/common.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-dvi.h> #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/usb.h> @@ -203,16 +203,16 @@ static void beagle_disable_dvi(struct omap_dss_device *dssdev) gpio_set_value(dssdev->reset_gpio, 0); } -static struct panel_generic_dpi_data dvi_panel = { - .name = "generic", +static struct panel_dvi_platform_data dvi_panel = { .platform_enable = beagle_enable_dvi, .platform_disable = beagle_disable_dvi, + .i2c_bus_num = 3, }; static struct omap_dss_device beagle_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "generic_dpi_panel", + .driver_name = "dvi", .data = &dvi_panel, .phy.dpi.data_lines = 24, .reset_gpio = -EINVAL, @@ -445,18 +445,6 @@ static struct platform_device keys_gpio = { }, }; -static void __init omap3_beagle_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); -} - -static void __init omap3_beagle_init_irq(void) -{ - omap3_init_irq(); -} - static struct platform_device madc_hwmon = { .name = "twl4030_madc_hwmon", .id = -1, @@ -500,8 +488,8 @@ static void __init beagle_opp_init(void) if (cpu_is_omap3630()) { struct device *mpu_dev, *iva_dev; - mpu_dev = omap2_get_mpuss_device(); - iva_dev = omap2_get_iva_device(); + mpu_dev = omap_device_get_by_hwmod_name("mpu"); + iva_dev = omap_device_get_by_hwmod_name("iva"); if (!mpu_dev || !iva_dev) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", @@ -541,6 +529,8 @@ static void __init omap3_beagle_init(void) ARRAY_SIZE(omap3_beagle_devices)); omap_display_init(&beagle_dss_data); omap_serial_init(); + omap_sdrc_init(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_mux_init_gpio(170, OMAP_PIN_INPUT); /* REVISIT leave DVI powered down until it's needed ... */ @@ -564,11 +554,11 @@ static void __init omap3_beagle_init(void) MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = omap3_beagle_init_early, - .init_irq = omap3_beagle_init_irq, + .init_early = omap3_init_early, + .init_irq = omap3_init_irq, .init_machine = omap3_beagle_init, .timer = &omap3_secure_timer, MACHINE_END |