diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-omap3beagle.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3beagle.c | 62 |
1 files changed, 29 insertions, 33 deletions
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 32f5f895568..7ffcd2839e7 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -40,9 +40,9 @@ #include <asm/mach/flash.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-dvi.h> #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/usb.h> @@ -203,16 +203,16 @@ static void beagle_disable_dvi(struct omap_dss_device *dssdev) gpio_set_value(dssdev->reset_gpio, 0); } -static struct panel_generic_dpi_data dvi_panel = { - .name = "generic", +static struct panel_dvi_platform_data dvi_panel = { .platform_enable = beagle_enable_dvi, .platform_disable = beagle_disable_dvi, + .i2c_bus_num = 3, }; static struct omap_dss_device beagle_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "generic_dpi_panel", + .driver_name = "dvi", .data = &dvi_panel, .phy.dpi.data_lines = 24, .reset_gpio = -EINVAL, @@ -378,7 +378,8 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { static int __init omap3_beagle_i2c_init(void) { omap3_pmic_get_config(&beagle_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | + TWL_COMMON_PDATA_AUDIO, TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); beagle_twldata.vpll2->constraints.name = "VDVI"; @@ -444,21 +445,15 @@ static struct platform_device keys_gpio = { }, }; -static void __init omap3_beagle_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); -} - -static void __init omap3_beagle_init_irq(void) -{ - omap3_init_irq(); -} +static struct platform_device madc_hwmon = { + .name = "twl4030_madc_hwmon", + .id = -1, +}; static struct platform_device *omap3_beagle_devices[] __initdata = { &leds_gpio, &keys_gpio, + &madc_hwmon, }; static const struct usbhs_omap_board_data usbhs_bdata __initconst = { @@ -491,23 +486,22 @@ static void __init beagle_opp_init(void) /* Custom OPP enabled for all xM versions */ if (cpu_is_omap3630()) { - struct omap_hwmod *mh = omap_hwmod_lookup("mpu"); - struct omap_hwmod *dh = omap_hwmod_lookup("iva"); - struct device *dev; + struct device *mpu_dev, *iva_dev; - if (!mh || !dh) { + mpu_dev = omap_device_get_by_hwmod_name("mpu"); + iva_dev = omap_device_get_by_hwmod_name("iva"); + + if (!mpu_dev || !iva_dev) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", - __func__, mh, dh); + __func__, mpu_dev, iva_dev); return; } /* Enable MPU 1GHz and lower opps */ - dev = &mh->od->pdev.dev; - r = opp_enable(dev, 800000000); + r = opp_enable(mpu_dev, 800000000); /* TODO: MPU 1GHz needs SR and ABB */ /* Enable IVA 800MHz and lower opps */ - dev = &dh->od->pdev.dev; - r |= opp_enable(dev, 660000000); + r |= opp_enable(iva_dev, 660000000); /* TODO: DSP 800MHz needs SR and ABB */ if (r) { pr_err("%s: failed to enable higher opp %d\n", @@ -516,10 +510,8 @@ static void __init beagle_opp_init(void) * Cleanup - disable the higher freqs - we dont care * about the results */ - dev = &mh->od->pdev.dev; - opp_disable(dev, 800000000); - dev = &dh->od->pdev.dev; - opp_disable(dev, 660000000); + opp_disable(mpu_dev, 800000000); + opp_disable(iva_dev, 660000000); } } return; @@ -537,6 +529,8 @@ static void __init omap3_beagle_init(void) ARRAY_SIZE(omap3_beagle_devices)); omap_display_init(&beagle_dss_data); omap_serial_init(); + omap_sdrc_init(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_mux_init_gpio(170, OMAP_PIN_INPUT); /* REVISIT leave DVI powered down until it's needed ... */ @@ -560,11 +554,13 @@ static void __init omap3_beagle_init(void) MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = omap3_beagle_init_early, - .init_irq = omap3_beagle_init_irq, + .init_early = omap3_init_early, + .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_beagle_init, .timer = &omap3_secure_timer, + .restart = omap_prcm_restart, MACHINE_END |