diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-omap3stalker.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3stalker.c | 99 |
1 files changed, 19 insertions, 80 deletions
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 0c108a212ea..8e104980ea2 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -52,7 +52,6 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "common-board-devices.h" #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) @@ -206,12 +205,12 @@ static struct omap_dss_board_info omap3_stalker_dss_data = { .default_device = &omap3_stalker_dvi_device, }; -static struct regulator_consumer_supply omap3stalker_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply omap3stalker_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply omap3stalker_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -224,8 +223,8 @@ static struct regulator_init_data omap3stalker_vmmc1 = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3stalker_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vmmc1_supply), + .consumer_supplies = omap3stalker_vmmc1_supply, }; /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ @@ -238,8 +237,8 @@ static struct regulator_init_data omap3stalker_vsim = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3stalker_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vsim_supply), + .consumer_supplies = omap3stalker_vsim_supply, }; static struct omap2_hsmmc_info mmc[] = { @@ -321,10 +320,6 @@ omap3stalker_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - omap3stalker_vmmc1_supply.dev = mmc[0].dev; - omap3stalker_vsim_supply.dev = mmc[0].dev; - /* * Most GPIOs are for USB OTG. Some are mostly sent to * the P2 connector; notably LEDA for the LCD backlight. @@ -354,10 +349,6 @@ static struct twl4030_gpio_platform_data omap3stalker_gpio_data = { .setup = omap3stalker_twl_gpio_setup, }; -static struct twl4030_usb_data omap3stalker_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static uint32_t board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_DOWN), @@ -392,68 +383,10 @@ static struct twl4030_keypad_data omap3stalker_kp_data = { .rep = 1, }; -static struct twl4030_madc_platform_data omap3stalker_madc_data = { - .irq_line = 1, -}; - -static struct twl4030_codec_audio_data omap3stalker_audio_data; - -static struct twl4030_codec_data omap3stalker_codec_data = { - .audio_mclk = 26000000, - .audio = &omap3stalker_audio_data, -}; - -static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); - -/* VDAC for DSS driving S-Video */ -static struct regulator_init_data omap3_stalker_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3_stalker_vdda_dac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply omap3_stalker_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - -static struct regulator_init_data omap3_stalker_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3_stalker_vpll2_supplies), - .consumer_supplies = omap3_stalker_vpll2_supplies, -}; - static struct twl4030_platform_data omap3stalker_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .keypad = &omap3stalker_kp_data, - .madc = &omap3stalker_madc_data, - .usb = &omap3stalker_usb_data, .gpio = &omap3stalker_gpio_data, - .codec = &omap3stalker_codec_data, - .vdac = &omap3_stalker_vdac, - .vpll2 = &omap3_stalker_vpll2, .vmmc1 = &omap3stalker_vmmc1, .vsim = &omap3stalker_vsim, }; @@ -474,6 +407,15 @@ static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = { static int __init omap3_stalker_i2c_init(void) { + omap3_pmic_get_config(&omap3stalker_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | + TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + + omap3stalker_twldata.vdac->constraints.apply_uV = true; + omap3stalker_twldata.vpll2->constraints.apply_uV = true; + omap3stalker_twldata.vpll2->constraints.name = "VDVI"; + omap3_pmic_init("twl4030", &omap3stalker_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3, @@ -494,10 +436,7 @@ static void __init omap3_stalker_init_early(void) static void __init omap3_stalker_init_irq(void) { - omap_init_irq(); -#ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(12); -#endif + omap3_init_irq(); } static struct platform_device *omap3_stalker_devices[] __initdata = { @@ -560,5 +499,5 @@ MACHINE_START(SBC3530, "OMAP3 STALKER") .init_early = omap3_stalker_init_early, .init_irq = omap3_stalker_init_irq, .init_machine = omap3_stalker_init, - .timer = &omap_timer, + .timer = &omap3_secure_timer, MACHINE_END |