diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-omap3touchbook.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3touchbook.c | 123 |
1 files changed, 13 insertions, 110 deletions
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 127cb1752bd..5f649faf737 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -52,11 +52,10 @@ #include "mux.h" #include "hsmmc.h" #include "timer-gp.h" +#include "common-board-devices.h" #include <asm/setup.h> -#define NAND_BLOCK_SIZE SZ_128K - #define OMAP3_AC_GPIO 136 #define OMAP3_TS_GPIO 162 #define TB_BL_PWM_TIMER 9 @@ -95,15 +94,6 @@ static struct mtd_partition omap3touchbook_nand_partitions[] = { }, }; -static struct omap_nand_platform_data omap3touchbook_nand_data = { - .options = NAND_BUSWIDTH_16, - .parts = omap3touchbook_nand_partitions, - .nr_parts = ARRAY_SIZE(omap3touchbook_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ - .nand_setup = NULL, - .dev_ready = NULL, -}; - #include "sdram-micron-mt46h32m32lf-6.h" static struct omap2_hsmmc_info mmc[] = { @@ -154,13 +144,11 @@ static int touchbook_twl_gpio_setup(struct device *dev, /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect */ - - gpio_request(gpio + 1, "EHCI_nOC"); - gpio_direction_input(gpio + 1); + gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"); /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ - gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW, + "nEN_USB_PWR"); /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -273,15 +261,6 @@ static struct twl4030_platform_data touchbook_twldata = { .vpll2 = &touchbook_vpll2, }; -static struct i2c_board_info __initdata touchbook_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &touchbook_twldata, - }, -}; - static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { { I2C_BOARD_INFO("bq27200", 0x55), @@ -291,8 +270,7 @@ static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { static int __init omap3_touchbook_i2c_init(void) { /* Standard TouchBook bus */ - omap_register_i2c_bus(1, 2600, touchbook_i2c_boardinfo, - ARRAY_SIZE(touchbook_i2c_boardinfo)); + omap3_pmic_init("twl4030", &touchbook_twldata); /* Additional TouchBook bus */ omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, @@ -301,19 +279,7 @@ static int __init omap3_touchbook_i2c_init(void) return 0; } -static void __init omap3_ads7846_init(void) -{ - if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) { - printk(KERN_ERR "Failed to request GPIO %d for " - "ads7846 pen down IRQ\n", OMAP3_TS_GPIO); - return; - } - - gpio_direction_input(OMAP3_TS_GPIO); - gpio_set_debounce(OMAP3_TS_GPIO, 310); -} - -static struct ads7846_platform_data ads7846_config = { +static struct ads7846_platform_data ads7846_pdata = { .x_min = 100, .y_min = 265, .x_max = 3950, @@ -327,23 +293,6 @@ static struct ads7846_platform_data ads7846_config = { .keep_vref_on = 1, }; -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 4, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_TS_GPIO), - .platform_data = &ads7846_config, - } -}; - static struct gpio_led gpio_leds[] = { { .name = "touchbook::usr0", @@ -434,39 +383,6 @@ static struct platform_device *omap3_touchbook_devices[] __initdata = { &keys_gpio, }; -static void __init omap3touchbook_flash_init(void) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); - return; - } - - if (nandcs < GPMC_CS_NUM) { - omap3touchbook_nand_data.cs = nandcs; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&omap3touchbook_nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, @@ -481,15 +397,10 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { static void omap3_touchbook_poweroff(void) { - int r; + int pwr_off = TB_KILL_POWER_GPIO; - r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset"); - if (r < 0) { + if (gpio_request_one(pwr_off, GPIOF_OUT_INIT_LOW, "DVI reset") < 0) printk(KERN_ERR "Unable to get kill power GPIO\n"); - return; - } - - gpio_direction_output(TB_KILL_POWER_GPIO, 0); } static int __init early_touchbook_revision(char *p) @@ -501,12 +412,6 @@ static int __init early_touchbook_revision(char *p) } early_param("tbr", early_touchbook_revision); -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap3_touchbook_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -521,17 +426,15 @@ static void __init omap3_touchbook_init(void) omap_serial_init(); omap_mux_init_gpio(170, OMAP_PIN_INPUT); - gpio_request(176, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ - gpio_direction_output(176, true); + gpio_request_one(176, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); /* Touchscreen and accelerometer */ - spi_register_board_info(omap3_ads7846_spi_board_info, - ARRAY_SIZE(omap3_ads7846_spi_board_info)); - omap3_ads7846_init(); - usb_musb_init(&musb_board_data); + omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap3touchbook_flash_init(); + omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions, + ARRAY_SIZE(omap3touchbook_nand_partitions)); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); |