diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-omap3touchbook.c')
-rw-r--r-- | arch/arm/mach-omap2/board-omap3touchbook.c | 133 |
1 files changed, 33 insertions, 100 deletions
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 5f649faf737..a2d0d1971e2 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -51,7 +51,6 @@ #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "common-board-devices.h" #include <asm/setup.h> @@ -105,21 +104,12 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct platform_device omap3_touchbook_lcd_device = { - .name = "omap3touchbook_lcd", - .id = -1, +static struct regulator_consumer_supply touchbook_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = { - .ctrl_name = "internal", -}; - -static struct regulator_consumer_supply touchbook_vmmc1_supply = { - .supply = "vmmc", -}; - -static struct regulator_consumer_supply touchbook_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply touchbook_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; static struct gpio_led gpio_leds[]; @@ -137,10 +127,6 @@ static int touchbook_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - touchbook_vmmc1_supply.dev = mmc[0].dev; - touchbook_vsim_supply.dev = mmc[0].dev; - /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect */ @@ -167,14 +153,16 @@ static struct twl4030_gpio_platform_data touchbook_gpio_data = { .setup = touchbook_twl_gpio_setup, }; -static struct regulator_consumer_supply touchbook_vdac_supply = { +static struct regulator_consumer_supply touchbook_vdac_supply[] = { +{ .supply = "vdac", - .dev = &omap3_touchbook_lcd_device.dev, +}, }; -static struct regulator_consumer_supply touchbook_vdvi_supply = { +static struct regulator_consumer_supply touchbook_vdvi_supply[] = { +{ .supply = "vdvi", - .dev = &omap3_touchbook_lcd_device.dev, +}, }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -188,8 +176,8 @@ static struct regulator_init_data touchbook_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &touchbook_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(touchbook_vmmc1_supply), + .consumer_supplies = touchbook_vmmc1_supply, }; /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ @@ -203,62 +191,15 @@ static struct regulator_init_data touchbook_vsim = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &touchbook_vsim_supply, -}; - -/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data touchbook_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &touchbook_vdac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_init_data touchbook_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &touchbook_vdvi_supply, -}; - -static struct twl4030_usb_data touchbook_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct twl4030_codec_audio_data touchbook_audio_data; - -static struct twl4030_codec_data touchbook_codec_data = { - .audio_mclk = 26000000, - .audio = &touchbook_audio_data, + .num_consumer_supplies = ARRAY_SIZE(touchbook_vsim_supply), + .consumer_supplies = touchbook_vsim_supply, }; static struct twl4030_platform_data touchbook_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .usb = &touchbook_usb_data, .gpio = &touchbook_gpio_data, - .codec = &touchbook_codec_data, .vmmc1 = &touchbook_vmmc1, .vsim = &touchbook_vsim, - .vdac = &touchbook_vdac, - .vpll2 = &touchbook_vpll2, }; static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { @@ -270,8 +211,20 @@ static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { static int __init omap3_touchbook_i2c_init(void) { /* Standard TouchBook bus */ - omap3_pmic_init("twl4030", &touchbook_twldata); + omap3_pmic_get_config(&touchbook_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + + touchbook_twldata.vdac->num_consumer_supplies = + ARRAY_SIZE(touchbook_vdac_supply); + touchbook_twldata.vdac->consumer_supplies = touchbook_vdac_supply; + touchbook_twldata.vpll2->constraints.name = "VDVI"; + touchbook_twldata.vpll2->num_consumer_supplies = + ARRAY_SIZE(touchbook_vdvi_supply); + touchbook_twldata.vpll2->consumer_supplies = touchbook_vdvi_supply; + + omap3_pmic_init("twl4030", &touchbook_twldata); /* Additional TouchBook bus */ omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, ARRAY_SIZE(touchBook_i2c_boardinfo)); @@ -352,33 +305,13 @@ static struct platform_device keys_gpio = { }, }; -static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = { - { OMAP_TAG_LCD, &omap3_touchbook_lcd_config }, -}; - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif -static void __init omap3_touchbook_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); -} - -static void __init omap3_touchbook_init_irq(void) -{ - omap_init_irq(); -#ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(12); -#endif -} - static struct platform_device *omap3_touchbook_devices[] __initdata = { - &omap3_touchbook_lcd_device, &leds_gpio, &keys_gpio, }; @@ -415,8 +348,6 @@ early_param("tbr", early_touchbook_revision); static void __init omap3_touchbook_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_board_config = omap3_touchbook_config; - omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config); pm_power_off = omap3_touchbook_poweroff; @@ -424,6 +355,8 @@ static void __init omap3_touchbook_init(void) platform_add_devices(omap3_touchbook_devices, ARRAY_SIZE(omap3_touchbook_devices)); omap_serial_init(); + omap_sdrc_init(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_mux_init_gpio(170, OMAP_PIN_INPUT); /* REVISIT leave DVI powered down until it's needed ... */ @@ -443,11 +376,11 @@ static void __init omap3_touchbook_init(void) MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = omap3_touchbook_init_early, - .init_irq = omap3_touchbook_init_irq, + .init_early = omap3430_init_early, + .init_irq = omap3_init_irq, .init_machine = omap3_touchbook_init, - .timer = &omap_timer, + .timer = &omap3_secure_timer, MACHINE_END |