diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-omap4panda.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-omap4panda.c | 80 |
1 files changed, 74 insertions, 6 deletions
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e2b912f376c..209cffbee4e 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -101,10 +101,10 @@ static void __init omap4_panda_init_early(void) omap2_init_common_devices(NULL, NULL); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = false, .reset_gpio_port[0] = -EINVAL, .reset_gpio_port[1] = -EINVAL, @@ -146,7 +146,7 @@ static void __init omap4_ehci_init(void) gpio_set_value(GPIO_HUB_NRESET, 0); gpio_set_value(GPIO_HUB_NRESET, 1); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); /* enable power to hub */ gpio_set_value(GPIO_HUB_POWER, 1); @@ -171,6 +171,7 @@ static struct twl4030_usb_data omap4_usbphy_data = { .phy_exit = omap4430_phy_exit, .phy_power = omap4430_phy_power, .phy_set_clock = omap4430_phy_set_clk, + .phy_suspend = omap4430_phy_suspend, }; static struct omap2_hsmmc_info mmc[] = { @@ -541,8 +542,75 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), { .reg_offset = OMAP_MUX_TERMINATOR }, }; + +static struct omap_device_pad serial2_pads[] __initdata = { + OMAP_MUX_STATIC("uart2_cts.uart2_cts", + OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), + OMAP_MUX_STATIC("uart2_rts.uart2_rts", + OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), + OMAP_MUX_STATIC("uart2_rx.uart2_rx", + OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), + OMAP_MUX_STATIC("uart2_tx.uart2_tx", + OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), +}; + +static struct omap_device_pad serial3_pads[] __initdata = { + OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx", + OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), + OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd", + OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), + OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx", + OMAP_PIN_INPUT | OMAP_MUX_MODE0), + OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx", + OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), +}; + +static struct omap_device_pad serial4_pads[] __initdata = { + OMAP_MUX_STATIC("uart4_rx.uart4_rx", + OMAP_PIN_INPUT | OMAP_MUX_MODE0), + OMAP_MUX_STATIC("uart4_tx.uart4_tx", + OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), +}; + +static struct omap_board_data serial2_data = { + .id = 1, + .pads = serial2_pads, + .pads_cnt = ARRAY_SIZE(serial2_pads), +}; + +static struct omap_board_data serial3_data = { + .id = 2, + .pads = serial3_pads, + .pads_cnt = ARRAY_SIZE(serial3_pads), +}; + +static struct omap_board_data serial4_data = { + .id = 3, + .pads = serial4_pads, + .pads_cnt = ARRAY_SIZE(serial4_pads), +}; + +static inline void board_serial_init(void) +{ + struct omap_board_data bdata; + bdata.flags = 0; + bdata.pads = NULL; + bdata.pads_cnt = 0; + bdata.id = 0; + /* pass dummy data for UART1 */ + omap_serial_init_port(&bdata); + + omap_serial_init_port(&serial2_data); + omap_serial_init_port(&serial3_data); + omap_serial_init_port(&serial4_data); +} #else #define board_mux NULL + +static inline void board_serial_init(void) +{ + omap_serial_init(); +} #endif /* Display DVI */ @@ -681,7 +749,7 @@ static void __init omap4_panda_init(void) omap4_panda_i2c_init(); platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); platform_device_register(&omap_vwlan_device); - omap_serial_init(); + board_serial_init(); omap4_twl6030_hsmmc_init(mmc); omap4_ehci_init(); usb_musb_init(&musb_board_data); |