diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-omap4panda.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-omap4panda.c | 117 |
1 files changed, 28 insertions, 89 deletions
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 8b06c6a60d0..28fc271f703 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -51,8 +51,9 @@ #define GPIO_HUB_NRESET 62 #define GPIO_WIFI_PMENA 43 #define GPIO_WIFI_IRQ 53 -#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ /* wl127x BT, FM, GPS connectivity chip */ static int wl1271_gpios[] = {46, -1, -1}; @@ -364,74 +365,8 @@ static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; -static struct omap_device_pad serial2_pads[] __initdata = { - OMAP_MUX_STATIC("uart2_cts.uart2_cts", - OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_rts.uart2_rts", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_rx.uart2_rx", - OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_tx.uart2_tx", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), -}; - -static struct omap_device_pad serial3_pads[] __initdata = { - OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx", - OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx", - OMAP_PIN_INPUT | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), -}; - -static struct omap_device_pad serial4_pads[] __initdata = { - OMAP_MUX_STATIC("uart4_rx.uart4_rx", - OMAP_PIN_INPUT | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart4_tx.uart4_tx", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), -}; - -static struct omap_board_data serial2_data __initdata = { - .id = 1, - .pads = serial2_pads, - .pads_cnt = ARRAY_SIZE(serial2_pads), -}; - -static struct omap_board_data serial3_data __initdata = { - .id = 2, - .pads = serial3_pads, - .pads_cnt = ARRAY_SIZE(serial3_pads), -}; - -static struct omap_board_data serial4_data __initdata = { - .id = 3, - .pads = serial4_pads, - .pads_cnt = ARRAY_SIZE(serial4_pads), -}; - -static inline void board_serial_init(void) -{ - struct omap_board_data bdata; - bdata.flags = 0; - bdata.pads = NULL; - bdata.pads_cnt = 0; - bdata.id = 0; - /* pass dummy data for UART1 */ - omap_serial_init_port(&bdata); - - omap_serial_init_port(&serial2_data); - omap_serial_init_port(&serial3_data); - omap_serial_init_port(&serial4_data); -} #else #define board_mux NULL - -static inline void board_serial_init(void) -{ - omap_serial_init(); -} #endif /* Display DVI */ @@ -478,24 +413,10 @@ int __init omap4_panda_dvi_init(void) return r; } - -static void omap4_panda_hdmi_mux_init(void) -{ - /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ - omap_mux_init_signal("hdmi_hpd", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_cec", - OMAP_PIN_INPUT_PULLUP); - /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ - omap_mux_init_signal("hdmi_ddc_scl", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_ddc_sda", - OMAP_PIN_INPUT_PULLUP); -} - static struct gpio panda_hdmi_gpios[] = { - { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, + { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, }; static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) @@ -512,10 +433,13 @@ static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev) { - gpio_free(HDMI_GPIO_LS_OE); - gpio_free(HDMI_GPIO_HPD); + gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios)); } +static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { + .hpd_gpio = HDMI_GPIO_HPD, +}; + static struct omap_dss_device omap4_panda_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -523,6 +447,7 @@ static struct omap_dss_device omap4_panda_hdmi_device = { .platform_enable = omap4_panda_panel_enable_hdmi, .platform_disable = omap4_panda_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &omap4_panda_hdmi_data, }; static struct omap_dss_device *omap4_panda_dss_devices[] = { @@ -544,25 +469,39 @@ void omap4_panda_display_init(void) if (r) pr_err("error initializing panda DVI\n"); - omap4_panda_hdmi_mux_init(); omap_display_init(&omap4_panda_dss_data); + + /* + * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and + * later have external pull up on the HDMI I2C lines + */ + if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) + omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); + else + omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } static void __init omap4_panda_init(void) { int package = OMAP_PACKAGE_CBS; + int ret; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); - if (wl12xx_set_platform_data(&omap_panda_wlan_data)) - pr_err("error setting wl12xx data\n"); + ret = wl12xx_set_platform_data(&omap_panda_wlan_data); + if (ret) + pr_err("error setting wl12xx data: %d\n", ret); omap4_panda_i2c_init(); platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); platform_device_register(&omap_vwlan_device); - board_serial_init(); + omap_serial_init(); omap_sdrc_init(NULL, NULL); omap4_twl6030_hsmmc_init(mmc); omap4_ehci_init(); |