diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-overo.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-overo.c | 357 |
1 files changed, 323 insertions, 34 deletions
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index d0961945c65..59ca33326b8 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -28,6 +28,8 @@ #include <linux/platform_device.h> #include <linux/i2c/twl.h> #include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/spi/spi.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -41,10 +43,14 @@ #include <plat/board.h> #include <plat/common.h> +#include <plat/display.h> +#include <plat/panel-generic-dpi.h> #include <mach/gpio.h> #include <plat/gpmc.h> #include <mach/hardware.h> #include <plat/nand.h> +#include <plat/mcspi.h> +#include <plat/mux.h> #include <plat/usb.h> #include "mux.h" @@ -68,8 +74,6 @@ #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -#include <plat/mcspi.h> -#include <linux/spi/spi.h> #include <linux/spi/ads7846.h> static struct omap2_mcspi_device_config ads7846_mcspi_config = { @@ -94,16 +98,32 @@ static struct ads7846_platform_data ads7846_config = { .keep_vref_on = 1, }; -static struct spi_board_info overo_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN), - .platform_data = &ads7846_config, - } +/* fixed regulator for ads7846 */ +static struct regulator_consumer_supply ads7846_supply = + REGULATOR_SUPPLY("vcc", "spi1.0"); + +static struct regulator_init_data vads7846_regulator = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &ads7846_supply, +}; + +static struct fixed_voltage_config vads7846 = { + .supply_name = "vads7846", + .microvolts = 3300000, /* 3.3V */ + .gpio = -EINVAL, + .startup_delay = 0, + .init_data = &vads7846_regulator, +}; + +static struct platform_device vads7846_device = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &vads7846, + }, }; static void __init overo_ads7846_init(void) @@ -116,8 +136,7 @@ static void __init overo_ads7846_init(void) return; } - spi_register_board_info(overo_spi_board_info, - ARRAY_SIZE(overo_spi_board_info)); + platform_device_register(&vads7846_device); } #else @@ -233,6 +252,137 @@ static inline void __init overo_init_smsc911x(void) static inline void __init overo_init_smsc911x(void) { return; } #endif +/* DSS */ +static int lcd_enabled; +static int dvi_enabled; + +#define OVERO_GPIO_LCD_EN 144 +#define OVERO_GPIO_LCD_BL 145 + +static void __init overo_display_init(void) +{ + if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) && + (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0)) + gpio_export(OVERO_GPIO_LCD_EN, 0); + else + printk(KERN_ERR "could not obtain gpio for " + "OVERO_GPIO_LCD_EN\n"); + + if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) && + (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0)) + gpio_export(OVERO_GPIO_LCD_BL, 0); + else + printk(KERN_ERR "could not obtain gpio for " + "OVERO_GPIO_LCD_BL\n"); +} + +static int overo_panel_enable_dvi(struct omap_dss_device *dssdev) +{ + if (lcd_enabled) { + printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); + return -EINVAL; + } + dvi_enabled = 1; + + return 0; +} + +static void overo_panel_disable_dvi(struct omap_dss_device *dssdev) +{ + dvi_enabled = 0; +} + +static struct panel_generic_dpi_data dvi_panel = { + .name = "generic", + .platform_enable = overo_panel_enable_dvi, + .platform_disable = overo_panel_disable_dvi, +}; + +static struct omap_dss_device overo_dvi_device = { + .name = "dvi", + .type = OMAP_DISPLAY_TYPE_DPI, + .driver_name = "generic_dpi_panel", + .data = &dvi_panel, + .phy.dpi.data_lines = 24, +}; + +static struct omap_dss_device overo_tv_device = { + .name = "tv", + .driver_name = "venc", + .type = OMAP_DISPLAY_TYPE_VENC, + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +}; + +static int overo_panel_enable_lcd(struct omap_dss_device *dssdev) +{ + if (dvi_enabled) { + printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); + return -EINVAL; + } + + gpio_set_value(OVERO_GPIO_LCD_EN, 1); + gpio_set_value(OVERO_GPIO_LCD_BL, 1); + lcd_enabled = 1; + return 0; +} + +static void overo_panel_disable_lcd(struct omap_dss_device *dssdev) +{ + gpio_set_value(OVERO_GPIO_LCD_EN, 0); + gpio_set_value(OVERO_GPIO_LCD_BL, 0); + lcd_enabled = 0; +} + +static struct panel_generic_dpi_data lcd43_panel = { + .name = "samsung_lte430wq_f0c", + .platform_enable = overo_panel_enable_lcd, + .platform_disable = overo_panel_disable_lcd, +}; + +static struct omap_dss_device overo_lcd43_device = { + .name = "lcd43", + .type = OMAP_DISPLAY_TYPE_DPI, + .driver_name = "generic_dpi_panel", + .data = &lcd43_panel, + .phy.dpi.data_lines = 24, +}; + +#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ + defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) +static struct omap_dss_device overo_lcd35_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "lcd35", + .driver_name = "lgphilips_lb035q02_panel", + .phy.dpi.data_lines = 24, + .platform_enable = overo_panel_enable_lcd, + .platform_disable = overo_panel_disable_lcd, +}; +#endif + +static struct omap_dss_device *overo_dss_devices[] = { + &overo_dvi_device, + &overo_tv_device, +#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ + defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) + &overo_lcd35_device, +#endif + &overo_lcd43_device, +}; + +static struct omap_dss_board_info overo_dss_data = { + .num_devices = ARRAY_SIZE(overo_dss_devices), + .devices = overo_dss_devices, + .default_device = &overo_dvi_device, +}; + +static struct regulator_consumer_supply overo_vdda_dac_supply = + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); + +static struct regulator_consumer_supply overo_vdds_dsi_supply[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; + static struct mtd_partition overo_nand_partitions[] = { { .name = "xloader", @@ -323,6 +473,93 @@ static struct regulator_consumer_supply overo_vmmc1_supply = { .supply = "vmmc", }; +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +#include <linux/leds.h> + +static struct gpio_led gpio_leds[] = { + { + .name = "overo:red:gpio21", + .default_trigger = "heartbeat", + .gpio = 21, + .active_low = true, + }, + { + .name = "overo:blue:gpio22", + .default_trigger = "none", + .gpio = 22, + .active_low = true, + }, + { + .name = "overo:blue:COM", + .default_trigger = "mmc0", + .gpio = -EINVAL, /* gets replaced */ + .active_low = true, + }, +}; + +static struct gpio_led_platform_data gpio_leds_pdata = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device gpio_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_leds_pdata, + }, +}; + +static void __init overo_init_led(void) +{ + platform_device_register(&gpio_leds_device); +} + +#else +static inline void __init overo_init_led(void) { return; } +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button gpio_buttons[] = { + { + .code = BTN_0, + .gpio = 23, + .desc = "button0", + .wakeup = 1, + }, + { + .code = BTN_1, + .gpio = 14, + .desc = "button1", + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data gpio_keys_pdata = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), +}; + +static struct platform_device gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &gpio_keys_pdata, + }, +}; + +static void __init overo_init_keys(void) +{ + platform_device_register(&gpio_keys_device); +} + +#else +static inline void __init overo_init_keys(void) { return; } +#endif + static int overo_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -330,6 +567,11 @@ static int overo_twl_gpio_setup(struct device *dev, overo_vmmc1_supply.dev = mmc[0].dev; +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; +#endif + return 0; } @@ -337,6 +579,7 @@ static struct twl4030_gpio_platform_data overo_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = true, .setup = overo_twl_gpio_setup, }; @@ -358,6 +601,35 @@ static struct regulator_init_data overo_vmmc1 = { .consumer_supplies = &overo_vmmc1_supply, }; +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ +static struct regulator_init_data overo_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &overo_vdda_dac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data overo_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(overo_vdds_dsi_supply), + .consumer_supplies = overo_vdds_dsi_supply, +}; + static struct twl4030_codec_audio_data overo_audio_data; static struct twl4030_codec_data overo_codec_data = { @@ -365,8 +637,6 @@ static struct twl4030_codec_data overo_codec_data = { .audio = &overo_audio_data, }; -/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */ - static struct twl4030_platform_data overo_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -374,6 +644,8 @@ static struct twl4030_platform_data overo_twldata = { .usb = &overo_usb_data, .codec = &overo_codec_data, .vmmc1 = &overo_vmmc1, + .vdac = &overo_vdac, + .vpll2 = &overo_vpll2, }; static struct i2c_board_info __initdata overo_i2c_boardinfo[] = { @@ -394,18 +666,38 @@ static int __init overo_i2c_init(void) return 0; } -static struct platform_device overo_lcd_device = { - .name = "overo_lcd", - .id = -1, -}; - -static struct omap_lcd_config overo_lcd_config __initdata = { - .ctrl_name = "internal", +static struct spi_board_info overo_spi_board_info[] __initdata = { +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + { + .modalias = "ads7846", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN), + .platform_data = &ads7846_config, + }, +#endif +#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ + defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) + { + .modalias = "lgphilips_lb035q02_panel-spi", + .bus_num = 1, + .chip_select = 1, + .max_speed_hz = 500000, + .mode = SPI_MODE_3, + }, +#endif }; -static struct omap_board_config_kernel overo_config[] __initdata = { - { OMAP_TAG_LCD, &overo_lcd_config }, -}; +static int __init overo_spi_init(void) +{ + overo_ads7846_init(); + spi_register_board_info(overo_spi_board_info, + ARRAY_SIZE(overo_spi_board_info)); + return 0; +} static void __init overo_init_early(void) { @@ -414,15 +706,10 @@ static void __init overo_init_early(void) mt46h32m32lf6_sdrc_params); } -static struct platform_device *overo_devices[] __initdata = { - &overo_lcd_device, -}; - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - .phy_reset = true, .reset_gpio_port[0] = -EINVAL, .reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET, @@ -444,16 +731,18 @@ static struct omap_musb_board_data musb_board_data = { static void __init overo_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_board_config = overo_config; - omap_board_config_size = ARRAY_SIZE(overo_config); overo_i2c_init(); - platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices)); + omap_display_init(&overo_dss_data); omap_serial_init(); overo_flash_init(); usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); + overo_spi_init(); overo_ads7846_init(); overo_init_smsc911x(); + overo_display_init(); + overo_init_led(); + overo_init_keys(); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); |