1 files changed, 13 insertions, 81 deletions

diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index 8cef477d6b0..c2a079cb76f 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -12,12 +12,12 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/i2c/twl.h>
 #include <linux/spi/spi.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <video/omapdss.h>
-#include "board-zoom.h"
+#include <video/omap-panel-data.h>
 
+#include "board-zoom.h"
 #include "soc.h"
 #include "common.h"
 
@@ -25,92 +25,17 @@
 #define LCD_PANEL_RESET_GPIO_PILOT	55
 #define LCD_PANEL_QVGA_GPIO		56
 
-static struct gpio zoom_lcd_gpios[] __initdata = {
-	{ -EINVAL,		GPIOF_OUT_INIT_HIGH, "lcd reset" },
-	{ LCD_PANEL_QVGA_GPIO,	GPIOF_OUT_INIT_HIGH, "lcd qvga"	 },
+static struct panel_nec_nl8048_data zoom_lcd_data = {
+	/* res_gpio filled in code */
+	.qvga_gpio = LCD_PANEL_QVGA_GPIO,
 };
 
-static void __init zoom_lcd_panel_init(void)
-{
-	zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
-			LCD_PANEL_RESET_GPIO_PROD :
-			LCD_PANEL_RESET_GPIO_PILOT;
-
-	if (gpio_request_array(zoom_lcd_gpios, ARRAY_SIZE(zoom_lcd_gpios)))
-		pr_err("%s: Failed to get LCD GPIOs.\n", __func__);
-}
-
-static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	return 0;
-}
-
-static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-}
-
-/* Register offsets in TWL4030_MODULE_INTBR */
-#define TWL_INTBR_PMBR1	0xD
-#define TWL_INTBR_GPBR1	0xC
-
-/* Register offsets in TWL_MODULE_PWM */
-#define TWL_LED_PWMON	0x3
-#define TWL_LED_PWMOFF	0x4
-
-static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level)
-{
-#ifdef CONFIG_TWL4030_CORE
-	unsigned char c;
-	u8 mux_pwm, enb_pwm;
-
-	if (level > 100)
-		return -1;
-
-	twl_i2c_read_u8(TWL4030_MODULE_INTBR, &mux_pwm, TWL_INTBR_PMBR1);
-	twl_i2c_read_u8(TWL4030_MODULE_INTBR, &enb_pwm, TWL_INTBR_GPBR1);
-
-	if (level == 0) {
-		/* disable pwm1 output and clock */
-		enb_pwm = enb_pwm & 0xF5;
-		/* change pwm1 pin to gpio pin */
-		mux_pwm = mux_pwm & 0xCF;
-		twl_i2c_write_u8(TWL4030_MODULE_INTBR,
-					enb_pwm, TWL_INTBR_GPBR1);
-		twl_i2c_write_u8(TWL4030_MODULE_INTBR,
-					mux_pwm, TWL_INTBR_PMBR1);
-		return 0;
-	}
-
-	if (!((enb_pwm & 0xA) && (mux_pwm & 0x30))) {
-		/* change gpio pin to pwm1 pin */
-		mux_pwm = mux_pwm | 0x30;
-		/* enable pwm1 output and clock*/
-		enb_pwm = enb_pwm | 0x0A;
-		twl_i2c_write_u8(TWL4030_MODULE_INTBR,
-					mux_pwm, TWL_INTBR_PMBR1);
-		twl_i2c_write_u8(TWL4030_MODULE_INTBR,
-					enb_pwm, TWL_INTBR_GPBR1);
-	}
-
-	c = ((50 * (100 - level)) / 100) + 1;
-	twl_i2c_write_u8(TWL_MODULE_PWM, 0x7F, TWL_LED_PWMOFF);
-	twl_i2c_write_u8(TWL_MODULE_PWM, c, TWL_LED_PWMON);
-#else
-	pr_warn("Backlight not enabled\n");
-#endif
-
-	return 0;
-}
-
 static struct omap_dss_device zoom_lcd_device = {
 	.name			= "lcd",
 	.driver_name		= "NEC_8048_panel",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.phy.dpi.data_lines	= 24,
-	.platform_enable	= zoom_panel_enable_lcd,
-	.platform_disable	= zoom_panel_disable_lcd,
-	.max_backlight_level	= 100,
-	.set_backlight		= zoom_set_bl_intensity,
+	.data			= &zoom_lcd_data,
 };
 
 static struct omap_dss_device *zoom_dss_devices[] = {
@@ -123,6 +48,13 @@ static struct omap_dss_board_info zoom_dss_data = {
 	.default_device		= &zoom_lcd_device,
 };
 
+static void __init zoom_lcd_panel_init(void)
+{
+	zoom_lcd_data.res_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
+			LCD_PANEL_RESET_GPIO_PROD :
+			LCD_PANEL_RESET_GPIO_PILOT;
+}
+
 static struct omap2_mcspi_device_config dss_lcd_mcspi_config = {
 	.turbo_mode		= 1,
 };