diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-zoom3.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-zoom3.c | 65 |
1 files changed, 58 insertions, 7 deletions
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c index 33147042485..6ca0b834161 100644 --- a/arch/arm/mach-omap2/board-zoom3.c +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -25,15 +25,50 @@ #include "mux.h" #include "sdram-hynix-h8mbx00u0mer-0em.h" -static void __init omap_zoom_map_io(void) -{ - omap2_set_globals_36xx(); - omap34xx_map_common_io(); -} - static struct omap_board_config_kernel zoom_config[] __initdata = { }; +static struct mtd_partition zoom_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader-NAND", + .offset = 0, + .size = 4 * (64 * 2048), /* 512KB, 0x80000 */ + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot-NAND", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 10 * (64 * 2048), /* 1.25MB, 0x140000 */ + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "Boot Env-NAND", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */ + .size = 2 * (64 * 2048), /* 256KB, 0x40000 */ + }, + { + .name = "Kernel-NAND", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x0200000*/ + .size = 240 * (64 * 2048), /* 30M, 0x1E00000 */ + }, + { + .name = "system", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x2000000 */ + .size = 3328 * (64 * 2048), /* 416M, 0x1A000000 */ + }, + { + .name = "userdata", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x1C000000*/ + .size = 256 * (64 * 2048), /* 32M, 0x2000000 */ + }, + { + .name = "cache", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x1E000000*/ + .size = 256 * (64 * 2048), /* 32M, 0x2000000 */ + }, +}; + static void __init omap_zoom_init_irq(void) { omap_board_config = zoom_config; @@ -46,6 +81,19 @@ static void __init omap_zoom_init_irq(void) #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* WLAN IRQ - GPIO 162 */ + OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + /* WLAN POWER ENABLE - GPIO 101 */ + OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + /* WLAN SDIO: MMC3 CMD */ + OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP), + /* WLAN SDIO: MMC3 CLK */ + OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), + /* WLAN SDIO: MMC3 DAT[0-3] */ + OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else @@ -66,6 +114,8 @@ static void __init omap_zoom_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); zoom_peripherals_init(); + board_nand_init(zoom_nand_partitions, + ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS); zoom_debugboard_init(); omap_mux_init_gpio(64, OMAP_PIN_OUTPUT); @@ -76,7 +126,8 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") .phys_io = ZOOM_UART_BASE, .io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc, .boot_params = 0x80000100, - .map_io = omap_zoom_map_io, + .map_io = omap3_map_io, + .reserve = omap_reserve, .init_irq = omap_zoom_init_irq, .init_machine = omap_zoom_init, .timer = &omap_timer, |