diff options
Diffstat (limited to 'arch/arm/mach-omap2/control.c')
| -rw-r--r-- | arch/arm/mach-omap2/control.c | 54 |
1 files changed, 15 insertions, 39 deletions
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 31e0dfe4a4e..44bb4d544dc 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -46,17 +46,7 @@ struct omap3_scratchpad { struct omap3_scratchpad_prcm_block { u32 prm_clksrc_ctrl; u32 prm_clksel; - u32 cm_clksel_core; - u32 cm_clksel_wkup; - u32 cm_clken_pll; - u32 cm_autoidle_pll; - u32 cm_clksel1_pll; - u32 cm_clksel2_pll; - u32 cm_clksel3_pll; - u32 cm_clken_pll_mpu; - u32 cm_autoidle_pll_mpu; - u32 cm_clksel1_pll_mpu; - u32 cm_clksel2_pll_mpu; + u32 cm_contents[11]; u32 prcm_block_size; }; @@ -347,34 +337,9 @@ void omap3_save_scratchpad_contents(void) prcm_block_contents.prm_clksel = omap2_prm_read_mod_reg(OMAP3430_CCR_MOD, OMAP3_PRM_CLKSEL_OFFSET); - prcm_block_contents.cm_clksel_core = - omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL); - prcm_block_contents.cm_clksel_wkup = - omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL); - prcm_block_contents.cm_clken_pll = - omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); - /* - * As per erratum i671, ROM code does not respect the PER DPLL - * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1. - * Then, in anycase, clear these bits to avoid extra latencies. - */ - prcm_block_contents.cm_autoidle_pll = - omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) & - ~OMAP3430_AUTO_PERIPH_DPLL_MASK; - prcm_block_contents.cm_clksel1_pll = - omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL); - prcm_block_contents.cm_clksel2_pll = - omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL); - prcm_block_contents.cm_clksel3_pll = - omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3); - prcm_block_contents.cm_clken_pll_mpu = - omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL); - prcm_block_contents.cm_autoidle_pll_mpu = - omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL); - prcm_block_contents.cm_clksel1_pll_mpu = - omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL); - prcm_block_contents.cm_clksel2_pll_mpu = - omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL); + + omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents); + prcm_block_contents.prcm_block_size = 0x0; /* Populate the SDRC block contents */ @@ -604,4 +569,15 @@ int omap3_ctrl_save_padconf(void) return 0; } +/** + * omap3_ctrl_set_iva_bootmode_idle - sets the IVA2 bootmode to idle + * + * Sets the bootmode for IVA2 to idle. This is needed by the PM code to + * force disable IVA2 so that it does not prevent any low-power states. + */ +void omap3_ctrl_set_iva_bootmode_idle(void) +{ + omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE, + OMAP343X_CONTROL_IVA2_BOOTMOD); +} #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */ |