diff options
Diffstat (limited to 'arch/arm/mach-omap2/devices.c')
-rw-r--r-- | arch/arm/mach-omap2/devices.c | 87 |
1 files changed, 80 insertions, 7 deletions
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 2dbb265bedd..9e5d51bee94 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -498,6 +498,76 @@ static void omap_init_sham(void) static inline void omap_init_sham(void) { } #endif +#if defined(CONFIG_CRYPTO_DEV_OMAP_AES) || defined(CONFIG_CRYPTO_DEV_OMAP_AES_MODULE) + +#ifdef CONFIG_ARCH_OMAP2 +static struct resource omap2_aes_resources[] = { + { + .start = OMAP24XX_SEC_AES_BASE, + .end = OMAP24XX_SEC_AES_BASE + 0x4C, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP24XX_DMA_AES_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = OMAP24XX_DMA_AES_RX, + .flags = IORESOURCE_DMA, + } +}; +static int omap2_aes_resources_sz = ARRAY_SIZE(omap2_aes_resources); +#else +#define omap2_aes_resources NULL +#define omap2_aes_resources_sz 0 +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static struct resource omap3_aes_resources[] = { + { + .start = OMAP34XX_SEC_AES_BASE, + .end = OMAP34XX_SEC_AES_BASE + 0x4C, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP34XX_DMA_AES2_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = OMAP34XX_DMA_AES2_RX, + .flags = IORESOURCE_DMA, + } +}; +static int omap3_aes_resources_sz = ARRAY_SIZE(omap3_aes_resources); +#else +#define omap3_aes_resources NULL +#define omap3_aes_resources_sz 0 +#endif + +static struct platform_device aes_device = { + .name = "omap-aes", + .id = -1, +}; + +static void omap_init_aes(void) +{ + if (cpu_is_omap24xx()) { + aes_device.resource = omap2_aes_resources; + aes_device.num_resources = omap2_aes_resources_sz; + } else if (cpu_is_omap34xx()) { + aes_device.resource = omap3_aes_resources; + aes_device.num_resources = omap3_aes_resources_sz; + } else { + pr_err("%s: platform not supported\n", __func__); + return; + } + platform_device_register(&aes_device); +} + +#else +static inline void omap_init_aes(void) { } +#endif + /*-------------------------------------------------------------------------*/ #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) @@ -624,7 +694,7 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, omap_mux_init_signal("sdmmc_dat0", 0); omap_mux_init_signal("sdmmc_dat_dir0", 0); omap_mux_init_signal("sdmmc_cmd_dir", 0); - if (mmc_controller->slots[0].wires == 4) { + if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) { omap_mux_init_signal("sdmmc_dat1", 0); omap_mux_init_signal("sdmmc_dat2", 0); omap_mux_init_signal("sdmmc_dat3", 0); @@ -652,8 +722,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("sdmmc1_dat0", OMAP_PIN_INPUT_PULLUP); - if (mmc_controller->slots[0].wires == 4 || - mmc_controller->slots[0].wires == 8) { + if (mmc_controller->slots[0].caps & + (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { omap_mux_init_signal("sdmmc1_dat1", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("sdmmc1_dat2", @@ -661,7 +731,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, omap_mux_init_signal("sdmmc1_dat3", OMAP_PIN_INPUT_PULLUP); } - if (mmc_controller->slots[0].wires == 8) { + if (mmc_controller->slots[0].caps & + MMC_CAP_8_BIT_DATA) { omap_mux_init_signal("sdmmc1_dat4", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("sdmmc1_dat5", @@ -685,8 +756,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, * For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed * in the board-*.c files */ - if (mmc_controller->slots[0].wires == 4 || - mmc_controller->slots[0].wires == 8) { + if (mmc_controller->slots[0].caps & + (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { omap_mux_init_signal("sdmmc2_dat1", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("sdmmc2_dat2", @@ -694,7 +765,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, omap_mux_init_signal("sdmmc2_dat3", OMAP_PIN_INPUT_PULLUP); } - if (mmc_controller->slots[0].wires == 8) { + if (mmc_controller->slots[0].caps & + MMC_CAP_8_BIT_DATA) { omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5", @@ -854,6 +926,7 @@ static int __init omap2_init_devices(void) omap_hdq_init(); omap_init_sti(); omap_init_sham(); + omap_init_aes(); omap_init_vout(); return 0; |