diff options
Diffstat (limited to 'arch/arm/mach-omap2/dpll3xxx.c')
| -rw-r--r-- | arch/arm/mach-omap2/dpll3xxx.c | 59 |
1 files changed, 37 insertions, 22 deletions
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index ed8d330522f..f77022be783 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -26,15 +26,13 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/bitops.h> +#include <linux/clkdev.h> #include <plat/cpu.h> #include <plat/clock.h> -#include <asm/clkdev.h> #include "clock.h" -#include "prm.h" -#include "prm-regbits-34xx.h" -#include "cm.h" +#include "cm2xxx_3xxx.h" #include "cm-regbits-34xx.h" /* CM_AUTOIDLE_PLL*.AUTO_* bit values */ @@ -225,10 +223,9 @@ static int _omap3_noncore_dpll_stop(struct clk *clk) } /** - * lookup_dco_sddiv - Set j-type DPLL4 compensation variables + * _lookup_dco - Lookup DCO used by j-type DPLL * @clk: pointer to a DPLL struct clk * @dco: digital control oscillator selector - * @sd_div: target sigma-delta divider * @m: DPLL multiplier to set * @n: DPLL divider to set * @@ -237,11 +234,9 @@ static int _omap3_noncore_dpll_stop(struct clk *clk) * XXX This code is not needed for 3430/AM35xx; can it be optimized * out in non-multi-OMAP builds for those chips? */ -static void lookup_dco_sddiv(struct clk *clk, u8 *dco, u8 *sd_div, u16 m, - u8 n) +static void _lookup_dco(struct clk *clk, u8 *dco, u16 m, u8 n) { - unsigned long fint, clkinp, sd; /* watch out for overflow */ - int mod1, mod2; + unsigned long fint, clkinp; /* watch out for overflow */ clkinp = clk->parent->rate; fint = (clkinp / n) * m; @@ -250,6 +245,27 @@ static void lookup_dco_sddiv(struct clk *clk, u8 *dco, u8 *sd_div, u16 m, *dco = 2; else *dco = 4; +} + +/** + * _lookup_sddiv - Calculate sigma delta divider for j-type DPLL + * @clk: pointer to a DPLL struct clk + * @sd_div: target sigma-delta divider + * @m: DPLL multiplier to set + * @n: DPLL divider to set + * + * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)" + * + * XXX This code is not needed for 3430/AM35xx; can it be optimized + * out in non-multi-OMAP builds for those chips? + */ +static void _lookup_sddiv(struct clk *clk, u8 *sd_div, u16 m, u8 n) +{ + unsigned long clkinp, sd; /* watch out for overflow */ + int mod1, mod2; + + clkinp = clk->parent->rate; + /* * target sigma-delta to near 250MHz * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)] @@ -278,6 +294,7 @@ static void lookup_dco_sddiv(struct clk *clk, u8 *dco, u8 *sd_div, u16 m, static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel) { struct dpll_data *dd = clk->dpll_data; + u8 dco, sd_div; u32 v; /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */ @@ -300,18 +317,16 @@ static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel) v |= m << __ffs(dd->mult_mask); v |= (n - 1) << __ffs(dd->div1_mask); - /* - * XXX This code is not needed for 3430/AM35XX; can it be optimized - * out in non-multi-OMAP builds for those chips? - */ - if ((dd->flags & DPLL_J_TYPE) && !(dd->flags & DPLL_NO_DCO_SEL)) { - u8 dco, sd_div; - lookup_dco_sddiv(clk, &dco, &sd_div, m, n); - /* XXX This probably will need revision for OMAP4 */ - v &= ~(OMAP3630_PERIPH_DPLL_DCO_SEL_MASK - | OMAP3630_PERIPH_DPLL_SD_DIV_MASK); - v |= dco << __ffs(OMAP3630_PERIPH_DPLL_DCO_SEL_MASK); - v |= sd_div << __ffs(OMAP3630_PERIPH_DPLL_SD_DIV_MASK); + /* Configure dco and sd_div for dplls that have these fields */ + if (dd->dco_mask) { + _lookup_dco(clk, &dco, m, n); + v &= ~(dd->dco_mask); + v |= dco << __ffs(dd->dco_mask); + } + if (dd->sddiv_mask) { + _lookup_sddiv(clk, &sd_div, m, n); + v &= ~(dd->sddiv_mask); + v |= sd_div << __ffs(dd->sddiv_mask); } __raw_writel(v, dd->mult_div1_reg); |