1 files changed, 53 insertions, 15 deletions

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 579697adaae..d24926e6340 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1341,14 +1341,6 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
 
 #ifdef CONFIG_MTD_NAND
 
-static const char * const nand_ecc_opts[] = {
-	[OMAP_ECC_HAMMING_CODE_DEFAULT]		= "sw",
-	[OMAP_ECC_HAMMING_CODE_HW]		= "hw",
-	[OMAP_ECC_HAMMING_CODE_HW_ROMCODE]	= "hw-romcode",
-	[OMAP_ECC_BCH4_CODE_HW]			= "bch4",
-	[OMAP_ECC_BCH8_CODE_HW]			= "bch8",
-};
-
 static const char * const nand_xfer_types[] = {
 	[NAND_OMAP_PREFETCH_POLLED]		= "prefetch-polled",
 	[NAND_OMAP_POLLED]			= "polled",
@@ -1378,13 +1370,41 @@ static int gpmc_probe_nand_child(struct platform_device *pdev,
 	gpmc_nand_data->cs = val;
 	gpmc_nand_data->of_node = child;
 
-	if (!of_property_read_string(child, "ti,nand-ecc-opt", &s))
-		for (val = 0; val < ARRAY_SIZE(nand_ecc_opts); val++)
-			if (!strcasecmp(s, nand_ecc_opts[val])) {
-				gpmc_nand_data->ecc_opt = val;
-				break;
-			}
+	/* Detect availability of ELM module */
+	gpmc_nand_data->elm_of_node = of_parse_phandle(child, "ti,elm-id", 0);
+	if (gpmc_nand_data->elm_of_node == NULL)
+		gpmc_nand_data->elm_of_node =
+					of_parse_phandle(child, "elm_id", 0);
+	if (gpmc_nand_data->elm_of_node == NULL)
+		pr_warn("%s: ti,elm-id property not found\n", __func__);
+
+	/* select ecc-scheme for NAND */
+	if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) {
+		pr_err("%s: ti,nand-ecc-opt not found\n", __func__);
+		return -ENODEV;
+	}
+	if (!strcmp(s, "ham1") || !strcmp(s, "sw") ||
+		!strcmp(s, "hw") || !strcmp(s, "hw-romcode"))
+		gpmc_nand_data->ecc_opt =
+				OMAP_ECC_HAM1_CODE_HW;
+	else if (!strcmp(s, "bch4"))
+		if (gpmc_nand_data->elm_of_node)
+			gpmc_nand_data->ecc_opt =
+				OMAP_ECC_BCH4_CODE_HW;
+		else
+			gpmc_nand_data->ecc_opt =
+				OMAP_ECC_BCH4_CODE_HW_DETECTION_SW;
+	else if (!strcmp(s, "bch8"))
+		if (gpmc_nand_data->elm_of_node)
+			gpmc_nand_data->ecc_opt =
+				OMAP_ECC_BCH8_CODE_HW;
+		else
+			gpmc_nand_data->ecc_opt =
+				OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
+	else
+		pr_err("%s: ti,nand-ecc-opt invalid value\n", __func__);
 
+	/* select data transfer mode for NAND controller */
 	if (!of_property_read_string(child, "ti,nand-xfer-type", &s))
 		for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++)
 			if (!strcasecmp(s, nand_xfer_types[val])) {
@@ -1482,6 +1502,22 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 	}
 
 	/*
+	 * For some GPMC devices we still need to rely on the bootloader
+	 * timings because the devices can be connected via FPGA. So far
+	 * the list is smc91x on the omap2 SDP boards, and 8250 on zooms.
+	 * REVISIT: Add timing support from slls644g.pdf and from the
+	 * lan91c96 manual.
+	 */
+	if (of_device_is_compatible(child, "ns16550a") ||
+	    of_device_is_compatible(child, "smsc,lan91c94") ||
+	    of_device_is_compatible(child, "smsc,lan91c111")) {
+		dev_warn(&pdev->dev,
+			 "%s using bootloader timings on CS%d\n",
+			 child->name, cs);
+		goto no_timings;
+	}
+
+	/*
 	 * FIXME: gpmc_cs_request() will map the CS to an arbitary
 	 * location in the gpmc address space. When booting with
 	 * device-tree we want the NOR flash to be mapped to the
@@ -1509,6 +1545,7 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 	gpmc_read_timings_dt(child, &gpmc_t);
 	gpmc_cs_set_timings(cs, &gpmc_t);
 
+no_timings:
 	if (of_platform_device_create(child, NULL, &pdev->dev))
 		return 0;
 
@@ -1562,7 +1599,8 @@ static int gpmc_probe_dt(struct platform_device *pdev)
 		else if (of_node_cmp(child->name, "onenand") == 0)
 			ret = gpmc_probe_onenand_child(pdev, child);
 		else if (of_node_cmp(child->name, "ethernet") == 0 ||
-			 of_node_cmp(child->name, "nor") == 0)
+			 of_node_cmp(child->name, "nor") == 0 ||
+			 of_node_cmp(child->name, "uart") == 0)
 			ret = gpmc_probe_generic_child(pdev, child);
 
 		if (WARN(ret < 0, "%s: probing gpmc child %s failed\n",