diff options
Diffstat (limited to 'arch/arm/mach-omap2/gpmc.c')
| -rw-r--r-- | arch/arm/mach-omap2/gpmc.c | 284 |
1 files changed, 263 insertions, 21 deletions
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 5bc3ca03551..f46933bc937 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -46,8 +46,9 @@ #define GPMC_ECC_CONFIG 0x1f4 #define GPMC_ECC_CONTROL 0x1f8 #define GPMC_ECC_SIZE_CONFIG 0x1fc +#define GPMC_ECC1_RESULT 0x200 -#define GPMC_CS0 0x60 +#define GPMC_CS0_OFFSET 0x60 #define GPMC_CS_SIZE 0x30 #define GPMC_MEM_START 0x00000000 @@ -92,7 +93,8 @@ struct omap3_gpmc_regs { static struct resource gpmc_mem_root; static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); -static unsigned gpmc_cs_map; +static unsigned int gpmc_cs_map; /* flag for cs which are initialized */ +static int gpmc_ecc_used = -EINVAL; /* cs using ecc engine */ static void __iomem *gpmc_base; @@ -108,11 +110,27 @@ static u32 gpmc_read_reg(int idx) return __raw_readl(gpmc_base + idx); } +static void gpmc_cs_write_byte(int cs, int idx, u8 val) +{ + void __iomem *reg_addr; + + reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; + __raw_writeb(val, reg_addr); +} + +static u8 gpmc_cs_read_byte(int cs, int idx) +{ + void __iomem *reg_addr; + + reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; + return __raw_readb(reg_addr); +} + void gpmc_cs_write_reg(int cs, int idx, u32 val) { void __iomem *reg_addr; - reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx; + reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; __raw_writel(val, reg_addr); } @@ -120,7 +138,7 @@ u32 gpmc_cs_read_reg(int cs, int idx) { void __iomem *reg_addr; - reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx; + reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; return __raw_readl(reg_addr); } @@ -419,8 +437,157 @@ void gpmc_cs_free(int cs) EXPORT_SYMBOL(gpmc_cs_free); /** + * gpmc_read_status - read access request to get the different gpmc status + * @cmd: command type + * @return status + */ +int gpmc_read_status(int cmd) +{ + int status = -EINVAL; + u32 regval = 0; + + switch (cmd) { + case GPMC_GET_IRQ_STATUS: + status = gpmc_read_reg(GPMC_IRQSTATUS); + break; + + case GPMC_PREFETCH_FIFO_CNT: + regval = gpmc_read_reg(GPMC_PREFETCH_STATUS); + status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval); + break; + + case GPMC_PREFETCH_COUNT: + regval = gpmc_read_reg(GPMC_PREFETCH_STATUS); + status = GPMC_PREFETCH_STATUS_COUNT(regval); + break; + + case GPMC_STATUS_BUFFER: + regval = gpmc_read_reg(GPMC_STATUS); + /* 1 : buffer is available to write */ + status = regval & GPMC_STATUS_BUFF_EMPTY; + break; + + default: + printk(KERN_ERR "gpmc_read_status: Not supported\n"); + } + return status; +} +EXPORT_SYMBOL(gpmc_read_status); + +/** + * gpmc_cs_configure - write request to configure gpmc + * @cs: chip select number + * @cmd: command type + * @wval: value to write + * @return status of the operation + */ +int gpmc_cs_configure(int cs, int cmd, int wval) +{ + int err = 0; + u32 regval = 0; + + switch (cmd) { + case GPMC_SET_IRQ_STATUS: + gpmc_write_reg(GPMC_IRQSTATUS, wval); + break; + + case GPMC_CONFIG_WP: + regval = gpmc_read_reg(GPMC_CONFIG); + if (wval) + regval &= ~GPMC_CONFIG_WRITEPROTECT; /* WP is ON */ + else + regval |= GPMC_CONFIG_WRITEPROTECT; /* WP is OFF */ + gpmc_write_reg(GPMC_CONFIG, regval); + break; + + case GPMC_CONFIG_RDY_BSY: + regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + if (wval) + regval |= WR_RD_PIN_MONITORING; + else + regval &= ~WR_RD_PIN_MONITORING; + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); + break; + + case GPMC_CONFIG_DEV_SIZE: + regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + regval |= GPMC_CONFIG1_DEVICESIZE(wval); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); + break; + + case GPMC_CONFIG_DEV_TYPE: + regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + regval |= GPMC_CONFIG1_DEVICETYPE(wval); + if (wval == GPMC_DEVICETYPE_NOR) + regval |= GPMC_CONFIG1_MUXADDDATA; + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); + break; + + default: + printk(KERN_ERR "gpmc_configure_cs: Not supported\n"); + err = -EINVAL; + } + + return err; +} +EXPORT_SYMBOL(gpmc_cs_configure); + +/** + * gpmc_nand_read - nand specific read access request + * @cs: chip select number + * @cmd: command type + */ +int gpmc_nand_read(int cs, int cmd) +{ + int rval = -EINVAL; + + switch (cmd) { + case GPMC_NAND_DATA: + rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA); + break; + + default: + printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n"); + } + return rval; +} +EXPORT_SYMBOL(gpmc_nand_read); + +/** + * gpmc_nand_write - nand specific write request + * @cs: chip select number + * @cmd: command type + * @wval: value to write + */ +int gpmc_nand_write(int cs, int cmd, int wval) +{ + int err = 0; + + switch (cmd) { + case GPMC_NAND_COMMAND: + gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval); + break; + + case GPMC_NAND_ADDRESS: + gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval); + break; + + case GPMC_NAND_DATA: + gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval); + + default: + printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n"); + err = -EINVAL; + } + return err; +} +EXPORT_SYMBOL(gpmc_nand_write); + + + +/** * gpmc_prefetch_enable - configures and starts prefetch transfer - * @cs: nand cs (chip select) number + * @cs: cs (chip select) number * @dma_mode: dma mode enable (1) or disable (0) * @u32_count: number of bytes to be transferred * @is_write: prefetch read(0) or write post(1) mode @@ -428,7 +595,6 @@ EXPORT_SYMBOL(gpmc_cs_free); int gpmc_prefetch_enable(int cs, int dma_mode, unsigned int u32_count, int is_write) { - uint32_t prefetch_config1; if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) { /* Set the amount of bytes to be prefetched */ @@ -437,17 +603,17 @@ int gpmc_prefetch_enable(int cs, int dma_mode, /* Set dma/mpu mode, the prefetch read / post write and * enable the engine. Set which cs is has requested for. */ - prefetch_config1 = ((cs << CS_NUM_SHIFT) | + gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) | PREFETCH_FIFOTHRESHOLD | ENABLE_PREFETCH | (dma_mode << DMA_MPU_MODE) | - (0x1 & is_write)); - gpmc_write_reg(GPMC_PREFETCH_CONFIG1, prefetch_config1); + (0x1 & is_write))); + + /* Start the prefetch engine */ + gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1); } else { return -EBUSY; } - /* Start the prefetch engine */ - gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1); return 0; } @@ -456,24 +622,24 @@ EXPORT_SYMBOL(gpmc_prefetch_enable); /** * gpmc_prefetch_reset - disables and stops the prefetch engine */ -void gpmc_prefetch_reset(void) +int gpmc_prefetch_reset(int cs) { + u32 config1; + + /* check if the same module/cs is trying to reset */ + config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1); + if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs) + return -EINVAL; + /* Stop the PFPW engine */ gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0); /* Reset/disable the PFPW engine */ gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0); -} -EXPORT_SYMBOL(gpmc_prefetch_reset); -/** - * gpmc_prefetch_status - reads prefetch status of engine - */ -int gpmc_prefetch_status(void) -{ - return gpmc_read_reg(GPMC_PREFETCH_STATUS); + return 0; } -EXPORT_SYMBOL(gpmc_prefetch_status); +EXPORT_SYMBOL(gpmc_prefetch_reset); static void __init gpmc_mem_init(void) { @@ -615,3 +781,79 @@ void omap3_gpmc_restore_context(void) } } #endif /* CONFIG_ARCH_OMAP3 */ + +/** + * gpmc_enable_hwecc - enable hardware ecc functionality + * @cs: chip select number + * @mode: read/write mode + * @dev_width: device bus width(1 for x16, 0 for x8) + * @ecc_size: bytes for which ECC will be generated + */ +int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size) +{ + unsigned int val; + + /* check if ecc module is in used */ + if (gpmc_ecc_used != -EINVAL) + return -EINVAL; + + gpmc_ecc_used = cs; + + /* clear ecc and enable bits */ + val = ((0x00000001<<8) | 0x00000001); + gpmc_write_reg(GPMC_ECC_CONTROL, val); + + /* program ecc and result sizes */ + val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F)); + gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val); + + switch (mode) { + case GPMC_ECC_READ: + gpmc_write_reg(GPMC_ECC_CONTROL, 0x101); + break; + case GPMC_ECC_READSYN: + gpmc_write_reg(GPMC_ECC_CONTROL, 0x100); + break; + case GPMC_ECC_WRITE: + gpmc_write_reg(GPMC_ECC_CONTROL, 0x101); + break; + default: + printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode); + break; + } + + /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ + val = (dev_width << 7) | (cs << 1) | (0x1); + gpmc_write_reg(GPMC_ECC_CONFIG, val); + return 0; +} + +/** + * gpmc_calculate_ecc - generate non-inverted ecc bytes + * @cs: chip select number + * @dat: data pointer over which ecc is computed + * @ecc_code: ecc code buffer + * + * Using non-inverted ECC is considered ugly since writing a blank + * page (padding) will clear the ECC bytes. This is not a problem as long + * no one is trying to write data on the seemingly unused page. Reading + * an erased page will produce an ECC mismatch between generated and read + * ECC bytes that has to be dealt with separately. + */ +int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code) +{ + unsigned int val = 0x0; + + if (gpmc_ecc_used != cs) + return -EINVAL; + + /* read ecc result */ + val = gpmc_read_reg(GPMC_ECC1_RESULT); + *ecc_code++ = val; /* P128e, ..., P1e */ + *ecc_code++ = val >> 16; /* P128o, ..., P1o */ + /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */ + *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0); + + gpmc_ecc_used = -EINVAL; + return 0; +} |