diff options
Diffstat (limited to 'arch/arm/mach-omap2/hsmmc.c')
-rw-r--r-- | arch/arm/mach-omap2/hsmmc.c | 424 |
1 files changed, 278 insertions, 146 deletions
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 5496bc7d40a..137e1a5f3d8 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -16,7 +16,10 @@ #include <mach/hardware.h> #include <plat/mmc.h> #include <plat/omap-pm.h> +#include <plat/mux.h> +#include <plat/omap_device.h> +#include "mux.h" #include "hsmmc.h" #include "control.h" @@ -28,10 +31,6 @@ static u16 control_mmc1; #define HSMMC_NAME_LEN 9 -static struct hsmmc_controller { - char name[HSMMC_NAME_LEN + 1]; -} hsmmc[OMAP34XX_NR_MMC]; - #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) static int hsmmc_get_context_loss(struct device *dev) @@ -204,179 +203,312 @@ static int nop_mmc_set_power(struct device *dev, int slot, int power_on, return 0; } -static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata; - -void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) +static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, + int controller_nr) { - struct omap2_hsmmc_info *c; - int nr_hsmmc = ARRAY_SIZE(hsmmc_data); - int i; - u32 reg; - - if (!cpu_is_omap44xx()) { - if (cpu_is_omap2430()) { - control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; - control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1; - } else { - control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE; - control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1; - } - } else { - control_pbias_offset = - OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE; - control_mmc1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1; - reg = omap4_ctrl_pad_readl(control_mmc1); - reg |= (OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK | - OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK); - reg &= ~(OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK | - OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK); - reg |= (OMAP4_USBC1_DR0_SPEEDCTRL_MASK| - OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK | - OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK); - omap4_ctrl_pad_writel(reg, control_mmc1); - } - - for (c = controllers; c->mmc; c++) { - struct hsmmc_controller *hc = hsmmc + c->mmc - 1; - struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1]; - - if (!c->mmc || c->mmc > nr_hsmmc) { - pr_debug("MMC%d: no such controller\n", c->mmc); - continue; - } - if (mmc) { - pr_debug("MMC%d: already configured\n", c->mmc); - continue; + if ((mmc_controller->slots[0].switch_pin > 0) && \ + (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, + OMAP_PIN_INPUT_PULLUP); + if ((mmc_controller->slots[0].gpio_wp > 0) && \ + (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, + OMAP_PIN_INPUT_PULLUP); + if (cpu_is_omap34xx()) { + if (controller_nr == 0) { + omap_mux_init_signal("sdmmc1_clk", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_cmd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat0", + OMAP_PIN_INPUT_PULLUP); + if (mmc_controller->slots[0].caps & + (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { + omap_mux_init_signal("sdmmc1_dat1", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat2", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat3", + OMAP_PIN_INPUT_PULLUP); + } + if (mmc_controller->slots[0].caps & + MMC_CAP_8_BIT_DATA) { + omap_mux_init_signal("sdmmc1_dat4", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat5", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat6", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat7", + OMAP_PIN_INPUT_PULLUP); + } } - - mmc = kzalloc(sizeof(struct omap_mmc_platform_data), - GFP_KERNEL); - if (!mmc) { - pr_err("Cannot allocate memory for mmc device!\n"); - goto done; + if (controller_nr == 1) { + /* MMC2 */ + omap_mux_init_signal("sdmmc2_clk", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_cmd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat0", + OMAP_PIN_INPUT_PULLUP); + + /* + * For 8 wire configurations, Lines DAT4, 5, 6 and 7 + * need to be muxed in the board-*.c files + */ + if (mmc_controller->slots[0].caps & + (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { + omap_mux_init_signal("sdmmc2_dat1", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat2", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat3", + OMAP_PIN_INPUT_PULLUP); + } + if (mmc_controller->slots[0].caps & + MMC_CAP_8_BIT_DATA) { + omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7", + OMAP_PIN_INPUT_PULLUP); + } } - if (c->name) - strncpy(hc->name, c->name, HSMMC_NAME_LEN); - else - snprintf(hc->name, ARRAY_SIZE(hc->name), - "mmc%islot%i", c->mmc, 1); - mmc->slots[0].name = hc->name; - mmc->nr_slots = 1; - mmc->slots[0].caps = c->caps; - mmc->slots[0].internal_clock = !c->ext_clock; - mmc->dma_mask = 0xffffffff; - if (cpu_is_omap44xx()) - mmc->reg_offset = OMAP4_MMC_REG_OFFSET; - else - mmc->reg_offset = 0; + /* + * For MMC3 the pins need to be muxed in the board-*.c files + */ + } +} - mmc->get_context_loss_count = hsmmc_get_context_loss; +static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, + struct omap_mmc_platform_data *mmc) +{ + char *hc_name; - mmc->slots[0].switch_pin = c->gpio_cd; - mmc->slots[0].gpio_wp = c->gpio_wp; + hc_name = kzalloc(sizeof(char) * (HSMMC_NAME_LEN + 1), GFP_KERNEL); + if (!hc_name) { + pr_err("Cannot allocate memory for controller slot name\n"); + kfree(hc_name); + return -ENOMEM; + } - mmc->slots[0].remux = c->remux; - mmc->slots[0].init_card = c->init_card; + if (c->name) + strncpy(hc_name, c->name, HSMMC_NAME_LEN); + else + snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i", + c->mmc, 1); + mmc->slots[0].name = hc_name; + mmc->nr_slots = 1; + mmc->slots[0].caps = c->caps; + mmc->slots[0].internal_clock = !c->ext_clock; + mmc->dma_mask = 0xffffffff; + if (cpu_is_omap44xx()) + mmc->reg_offset = OMAP4_MMC_REG_OFFSET; + else + mmc->reg_offset = 0; - if (c->cover_only) - mmc->slots[0].cover = 1; + mmc->get_context_loss_count = hsmmc_get_context_loss; - if (c->nonremovable) - mmc->slots[0].nonremovable = 1; + mmc->slots[0].switch_pin = c->gpio_cd; + mmc->slots[0].gpio_wp = c->gpio_wp; - if (c->power_saving) - mmc->slots[0].power_saving = 1; + mmc->slots[0].remux = c->remux; + mmc->slots[0].init_card = c->init_card; - if (c->no_off) - mmc->slots[0].no_off = 1; + if (c->cover_only) + mmc->slots[0].cover = 1; - if (c->vcc_aux_disable_is_sleep) - mmc->slots[0].vcc_aux_disable_is_sleep = 1; + if (c->nonremovable) + mmc->slots[0].nonremovable = 1; - /* NOTE: MMC slots should have a Vcc regulator set up. - * This may be from a TWL4030-family chip, another - * controllable regulator, or a fixed supply. - * - * temporary HACK: ocr_mask instead of fixed supply - */ - mmc->slots[0].ocr_mask = c->ocr_mask; + if (c->power_saving) + mmc->slots[0].power_saving = 1; - if (cpu_is_omap3517() || cpu_is_omap3505()) - mmc->slots[0].set_power = nop_mmc_set_power; - else - mmc->slots[0].features |= HSMMC_HAS_PBIAS; + if (c->no_off) + mmc->slots[0].no_off = 1; - if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0)) - mmc->slots[0].features |= HSMMC_HAS_UPDATED_RESET; + if (c->vcc_aux_disable_is_sleep) + mmc->slots[0].vcc_aux_disable_is_sleep = 1; - switch (c->mmc) { - case 1: - if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { - /* on-chip level shifting via PBIAS0/PBIAS1 */ - if (cpu_is_omap44xx()) { - mmc->slots[0].before_set_reg = + /* + * NOTE: MMC slots should have a Vcc regulator set up. + * This may be from a TWL4030-family chip, another + * controllable regulator, or a fixed supply. + * + * temporary HACK: ocr_mask instead of fixed supply + */ + mmc->slots[0].ocr_mask = c->ocr_mask; + + if (cpu_is_omap3517() || cpu_is_omap3505()) + mmc->slots[0].set_power = nop_mmc_set_power; + else + mmc->slots[0].features |= HSMMC_HAS_PBIAS; + + if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0)) + mmc->slots[0].features |= HSMMC_HAS_UPDATED_RESET; + + switch (c->mmc) { + case 1: + if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { + /* on-chip level shifting via PBIAS0/PBIAS1 */ + if (cpu_is_omap44xx()) { + mmc->slots[0].before_set_reg = omap4_hsmmc1_before_set_reg; - mmc->slots[0].after_set_reg = + mmc->slots[0].after_set_reg = omap4_hsmmc1_after_set_reg; - } else { - mmc->slots[0].before_set_reg = + } else { + mmc->slots[0].before_set_reg = omap_hsmmc1_before_set_reg; - mmc->slots[0].after_set_reg = + mmc->slots[0].after_set_reg = omap_hsmmc1_after_set_reg; - } } + } - /* Omap3630 HSMMC1 supports only 4-bit */ - if (cpu_is_omap3630() && - (c->caps & MMC_CAP_8_BIT_DATA)) { - c->caps &= ~MMC_CAP_8_BIT_DATA; - c->caps |= MMC_CAP_4_BIT_DATA; - mmc->slots[0].caps = c->caps; - } - break; - case 2: - if (c->ext_clock) - c->transceiver = 1; - if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) { - c->caps &= ~MMC_CAP_8_BIT_DATA; - c->caps |= MMC_CAP_4_BIT_DATA; - } - /* FALLTHROUGH */ - case 3: - if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { - /* off-chip level shifting, or none */ - mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; - mmc->slots[0].after_set_reg = NULL; - } - break; - case 4: - case 5: - mmc->slots[0].before_set_reg = NULL; + /* OMAP3630 HSMMC1 supports only 4-bit */ + if (cpu_is_omap3630() && + (c->caps & MMC_CAP_8_BIT_DATA)) { + c->caps &= ~MMC_CAP_8_BIT_DATA; + c->caps |= MMC_CAP_4_BIT_DATA; + mmc->slots[0].caps = c->caps; + } + break; + case 2: + if (c->ext_clock) + c->transceiver = 1; + if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) { + c->caps &= ~MMC_CAP_8_BIT_DATA; + c->caps |= MMC_CAP_4_BIT_DATA; + } + /* FALLTHROUGH */ + case 3: + if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { + /* off-chip level shifting, or none */ + mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; mmc->slots[0].after_set_reg = NULL; - break; - default: - pr_err("MMC%d configuration not supported!\n", c->mmc); - kfree(mmc); - continue; } - hsmmc_data[c->mmc - 1] = mmc; + break; + case 4: + case 5: + mmc->slots[0].before_set_reg = NULL; + mmc->slots[0].after_set_reg = NULL; + break; + default: + pr_err("MMC%d configuration not supported!\n", c->mmc); + kfree(hc_name); + return -ENODEV; + } + return 0; +} + +static struct omap_device_pm_latency omap_hsmmc_latency[] = { + [0] = { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, + /* + * XXX There should also be an entry here to power off/on the + * MMC regulators/PBIAS cells, etc. + */ +}; + +#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 + +void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) +{ + struct omap_hwmod *oh; + struct omap_device *od; + struct omap_device_pm_latency *ohl; + char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN]; + struct omap_mmc_platform_data *mmc_data; + struct omap_mmc_dev_attr *mmc_dev_attr; + char *name; + int l; + int ohl_cnt = 0; + + mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL); + if (!mmc_data) { + pr_err("Cannot allocate memory for mmc device!\n"); + goto done; } - omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC); + if (omap_hsmmc_pdata_init(hsmmcinfo, mmc_data) < 0) { + pr_err("%s fails!\n", __func__); + goto done; + } + omap_hsmmc_mux(mmc_data, (ctrl_nr - 1)); + + name = "omap_hsmmc"; + ohl = omap_hsmmc_latency; + ohl_cnt = ARRAY_SIZE(omap_hsmmc_latency); + + l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN, + "mmc%d", ctrl_nr); + WARN(l >= MAX_OMAP_MMC_HWMOD_NAME_LEN, + "String buffer overflow in MMC%d device setup\n", ctrl_nr); + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up %s\n", oh_name); + kfree(mmc_data->slots[0].name); + goto done; + } - /* pass the device nodes back to board setup code */ - for (c = controllers; c->mmc; c++) { - struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1]; + if (oh->dev_attr != NULL) { + mmc_dev_attr = oh->dev_attr; + mmc_data->controller_flags = mmc_dev_attr->flags; + } - if (!c->mmc || c->mmc > nr_hsmmc) - continue; - c->dev = mmc->dev; + od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data, + sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false); + if (IS_ERR(od)) { + WARN(1, "Cant build omap_device for %s:%s.\n", name, oh->name); + kfree(mmc_data->slots[0].name); + goto done; } + /* + * return device handle to board setup code + * required to populate for regulator framework structure + */ + hsmmcinfo->dev = &od->pdev.dev; done: - for (i = 0; i < nr_hsmmc; i++) - kfree(hsmmc_data[i]); + kfree(mmc_data); +} + +void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) +{ + u32 reg; + + if (!cpu_is_omap44xx()) { + if (cpu_is_omap2430()) { + control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; + control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1; + } else { + control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE; + control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1; + } + } else { + control_pbias_offset = + OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE; + control_mmc1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1; + reg = omap4_ctrl_pad_readl(control_mmc1); + reg |= (OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK | + OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK); + reg &= ~(OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK | + OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK); + reg |= (OMAP4_USBC1_DR0_SPEEDCTRL_MASK| + OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK | + OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK); + omap4_ctrl_pad_writel(reg, control_mmc1); + } + + for (; controllers->mmc; controllers++) + omap_init_hsmmc(controllers, controllers->mmc); + } #endif |