diff options
Diffstat (limited to 'arch/arm/mach-omap2/opp2420_data.c')
| -rw-r--r-- | arch/arm/mach-omap2/opp2420_data.c | 126 |
1 files changed, 126 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c new file mode 100644 index 00000000000..126a9396b3a --- /dev/null +++ b/arch/arm/mach-omap2/opp2420_data.c @@ -0,0 +1,126 @@ +/* + * opp2420_data.c - old-style "OPP" table for OMAP2420 + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + * + * Richard Woodruff <r-woodruff2@ti.com> + * + * The OMAP2 processor can be run at several discrete 'PRCM configurations'. + * These configurations are characterized by voltage and speed for clocks. + * The device is only validated for certain combinations. One way to express + * these combinations is via the 'ratio's' which the clocks operate with + * respect to each other. These ratio sets are for a given voltage/DPLL + * setting. All configurations can be described by a DPLL setting and a ratio + * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * + * 2430 differs from 2420 in that there are no more phase synchronizers used. + * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs + * 2430 (iva2.1, NOdsp, mdm) + * + * XXX Missing voltage data. + * + * THe format described in this file is deprecated. Once a reasonable + * OPP API exists, the data in this file should be converted to use it. + * + * This is technically part of the OMAP2xxx clock code. + */ + +#include "opp2xxx.h" +#include "sdrc.h" +#include "clock.h" + +/*------------------------------------------------------------------------- + * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, + * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, + * CM_CLKSEL2_PLL, CM_CLKSEL_MDM + * + * Filling in table based on H4 boards and 2430-SDPs variants available. + * There are quite a few more rates combinations which could be defined. + * + * When multiple values are defined the start up will try and choose the + * fastest one. If a 'fast' value is defined, then automatically, the /2 + * one should be included as it can be used. Generally having more that + * one fast set does not make sense, as static timings need to be changed + * to change the set. The exception is the bypass setting which is + * availble for low power bypass. + * + * Note: This table needs to be sorted, fastest to slowest. + *-------------------------------------------------------------------------*/ +const struct prcm_config omap2420_rate_table[] = { + /* PRCM I - FAST */ + {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ + RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL, + RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz, + RATE_IN_242X}, + + /* PRCM II - FAST */ + {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + /* PRCM III - FAST */ + {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + /* PRCM II - SLOW */ + {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + /* PRCM III - SLOW */ + {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + /* PRCM-VII (boot-bypass) */ + {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/ + RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, + RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, + RATE_IN_242X}, + + /* PRCM-VII (boot-bypass) */ + {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */ + RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, + RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, + RATE_IN_242X}, + + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, +}; |