1 files changed, 0 insertions, 116 deletions
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 0cdd359a128..2e351f52938 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -120,124 +120,8 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {}
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_OMAP_MUX
-static struct omap_device_pad default_uart1_pads[] __initdata = {
-	{
-		.name	= "uart1_cts.uart1_cts",
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart1_rts.uart1_rts",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart1_tx.uart1_tx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart1_rx.uart1_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-};
-
-static struct omap_device_pad default_uart2_pads[] __initdata = {
-	{
-		.name	= "uart2_cts.uart2_cts",
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart2_rts.uart2_rts",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart2_tx.uart2_tx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart2_rx.uart2_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-};
-
-static struct omap_device_pad default_uart3_pads[] __initdata = {
-	{
-		.name	= "uart3_cts_rctx.uart3_cts_rctx",
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart3_rts_sd.uart3_rts_sd",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart3_tx_irtx.uart3_tx_irtx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart3_rx_irrx.uart3_rx_irrx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-	},
-};
-
-static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = {
-	{
-		.name   = "gpmc_wait2.uart4_tx",
-		.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "gpmc_wait3.uart4_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT | OMAP_MUX_MODE2,
-		.idle	= OMAP_PIN_INPUT | OMAP_MUX_MODE2,
-	},
-};
-
-static struct omap_device_pad default_omap4_uart4_pads[] __initdata = {
-	{
-		.name	= "uart4_tx.uart4_tx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart4_rx.uart4_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-	},
-};
-
 static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
 {
-	switch (bdata->id) {
-	case 0:
-		bdata->pads = default_uart1_pads;
-		bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads);
-		break;
-	case 1:
-		bdata->pads = default_uart2_pads;
-		bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads);
-		break;
-	case 2:
-		bdata->pads = default_uart3_pads;
-		bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads);
-		break;
-	case 3:
-		if (cpu_is_omap44xx()) {
-			bdata->pads = default_omap4_uart4_pads;
-			bdata->pads_cnt =
-				ARRAY_SIZE(default_omap4_uart4_pads);
-		} else if (cpu_is_omap3630()) {
-			bdata->pads = default_omap36xx_uart4_pads;
-			bdata->pads_cnt =
-				ARRAY_SIZE(default_omap36xx_uart4_pads);
-		}
-		break;
-	default:
-		break;
-	}
 }
 #else
 static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}