diff options
Diffstat (limited to 'arch/arm/mach-omap2/usb-fs.c')
| -rw-r--r-- | arch/arm/mach-omap2/usb-fs.c | 359 |
1 files changed, 359 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/usb-fs.c b/arch/arm/mach-omap2/usb-fs.c new file mode 100644 index 00000000000..a216d88b04b --- /dev/null +++ b/arch/arm/mach-omap2/usb-fs.c @@ -0,0 +1,359 @@ +/* + * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx + * + * Copyright (C) 2004 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <asm/irq.h> + +#include <plat/control.h> +#include <plat/usb.h> +#include <plat/board.h> + +#define INT_USB_IRQ_GEN INT_24XX_USB_IRQ_GEN +#define INT_USB_IRQ_NISO INT_24XX_USB_IRQ_NISO +#define INT_USB_IRQ_ISO INT_24XX_USB_IRQ_ISO +#define INT_USB_IRQ_HGEN INT_24XX_USB_IRQ_HGEN +#define INT_USB_IRQ_OTG INT_24XX_USB_IRQ_OTG + +#include "mux.h" + +#if defined(CONFIG_ARCH_OMAP2) + +#ifdef CONFIG_USB_GADGET_OMAP + +static struct resource udc_resources[] = { + /* order is significant! */ + { /* registers */ + .start = UDC_BASE, + .end = UDC_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, { /* general IRQ */ + .start = INT_USB_IRQ_GEN, + .flags = IORESOURCE_IRQ, + }, { /* PIO IRQ */ + .start = INT_USB_IRQ_NISO, + .flags = IORESOURCE_IRQ, + }, { /* SOF IRQ */ + .start = INT_USB_IRQ_ISO, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 udc_dmamask = ~(u32)0; + +static struct platform_device udc_device = { + .name = "omap_udc", + .id = -1, + .dev = { + .dma_mask = &udc_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(udc_resources), + .resource = udc_resources, +}; + +static inline void udc_device_init(struct omap_usb_config *pdata) +{ + pdata->udc_device = &udc_device; +} + +#else + +static inline void udc_device_init(struct omap_usb_config *pdata) +{ +} + +#endif + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + +/* The dmamask must be set for OHCI to work */ +static u64 ohci_dmamask = ~(u32)0; + +static struct resource ohci_resources[] = { + { + .start = OMAP_OHCI_BASE, + .end = OMAP_OHCI_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_USB_IRQ_HGEN, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ohci_device = { + .name = "ohci", + .id = -1, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(ohci_resources), + .resource = ohci_resources, +}; + +static inline void ohci_device_init(struct omap_usb_config *pdata) +{ + pdata->ohci_device = &ohci_device; +} + +#else + +static inline void ohci_device_init(struct omap_usb_config *pdata) +{ +} + +#endif + +#if defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG) + +static struct resource otg_resources[] = { + /* order is significant! */ + { + .start = OTG_BASE, + .end = OTG_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, { + .start = INT_USB_IRQ_OTG, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device otg_device = { + .name = "omap_otg", + .id = -1, + .num_resources = ARRAY_SIZE(otg_resources), + .resource = otg_resources, +}; + +static inline void otg_device_init(struct omap_usb_config *pdata) +{ + pdata->otg_device = &otg_device; +} + +#else + +static inline void otg_device_init(struct omap_usb_config *pdata) +{ +} + +#endif + +static void omap2_usb_devconf_clear(u8 port, u32 mask) +{ + u32 r; + + r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + r &= ~USBTXWRMODEI(port, mask); + omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); +} + +static void omap2_usb_devconf_set(u8 port, u32 mask) +{ + u32 r; + + r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + r |= USBTXWRMODEI(port, mask); + omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); +} + +static void omap2_usb2_disable_5pinbitll(void) +{ + u32 r; + + r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI); + omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); +} + +static void omap2_usb2_enable_5pinunitll(void) +{ + u32 r; + + r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI; + omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); +} + +static u32 __init omap2_usb0_init(unsigned nwires, unsigned is_device) +{ + u32 syscon1 = 0; + + omap2_usb_devconf_clear(0, USB_BIDIR_TLL); + + if (nwires == 0) + return 0; + + if (is_device) + omap_mux_init_signal("usb0_puen", 0); + + omap_mux_init_signal("usb0_dat", 0); + omap_mux_init_signal("usb0_txen", 0); + omap_mux_init_signal("usb0_se0", 0); + if (nwires != 3) + omap_mux_init_signal("usb0_rcv", 0); + + switch (nwires) { + case 3: + syscon1 = 2; + omap2_usb_devconf_set(0, USB_BIDIR); + break; + case 4: + syscon1 = 1; + omap2_usb_devconf_set(0, USB_BIDIR); + break; + case 6: + syscon1 = 3; + omap_mux_init_signal("usb0_vp", 0); + omap_mux_init_signal("usb0_vm", 0); + omap2_usb_devconf_set(0, USB_UNIDIR); + break; + default: + printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", + 0, nwires); + } + + return syscon1 << 16; +} + +static u32 __init omap2_usb1_init(unsigned nwires) +{ + u32 syscon1 = 0; + + omap2_usb_devconf_clear(1, USB_BIDIR_TLL); + + if (nwires == 0) + return 0; + + /* NOTE: board-specific code must set up pin muxing for usb1, + * since each signal could come out on either of two balls. + */ + + switch (nwires) { + case 2: + /* NOTE: board-specific code must override this setting if + * this TLL link is not using DP/DM + */ + syscon1 = 1; + omap2_usb_devconf_set(1, USB_BIDIR_TLL); + break; + case 3: + syscon1 = 2; + omap2_usb_devconf_set(1, USB_BIDIR); + break; + case 4: + syscon1 = 1; + omap2_usb_devconf_set(1, USB_BIDIR); + break; + case 6: + default: + printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", + 1, nwires); + } + + return syscon1 << 20; +} + +static u32 __init omap2_usb2_init(unsigned nwires, unsigned alt_pingroup) +{ + u32 syscon1 = 0; + + omap2_usb2_disable_5pinbitll(); + alt_pingroup = 0; + + /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */ + if (alt_pingroup || nwires == 0) + return 0; + + omap_mux_init_signal("usb2_dat", 0); + omap_mux_init_signal("usb2_se0", 0); + if (nwires > 2) + omap_mux_init_signal("usb2_txen", 0); + if (nwires > 3) + omap_mux_init_signal("usb2_rcv", 0); + + switch (nwires) { + case 2: + /* NOTE: board-specific code must override this setting if + * this TLL link is not using DP/DM + */ + syscon1 = 1; + omap2_usb_devconf_set(2, USB_BIDIR_TLL); + break; + case 3: + syscon1 = 2; + omap2_usb_devconf_set(2, USB_BIDIR); + break; + case 4: + syscon1 = 1; + omap2_usb_devconf_set(2, USB_BIDIR); + break; + case 5: + /* NOTE: board-specific code must mux this setting depending + * on TLL link using DP/DM. Something must also + * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED} + * 2420: hdq_sio.usb2_tllse0 or vlynq_rx0.usb2_tllse0 + * 2430: hdq_sio.usb2_tllse0 or sdmmc2_dat0.usb2_tllse0 + */ + + syscon1 = 3; + omap2_usb2_enable_5pinunitll(); + break; + case 6: + default: + printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", + 2, nwires); + } + + return syscon1 << 24; +} + +void __init omap2_usbfs_init(struct omap_usb_config *pdata) +{ + struct clk *ick; + + if (!cpu_is_omap24xx()) + return; + + ick = clk_get(NULL, "usb_l4_ick"); + if (IS_ERR(ick)) + return; + + clk_enable(ick); + pdata->usb0_init = omap2_usb0_init; + pdata->usb1_init = omap2_usb1_init; + pdata->usb2_init = omap2_usb2_init; + udc_device_init(pdata); + ohci_device_init(pdata); + otg_device_init(pdata); + omap_otg_init(pdata); + clk_disable(ick); + clk_put(ick); +} + +#endif |