summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2')
-rw-r--r--arch/arm/mach-omap2/Kconfig1
-rw-r--r--arch/arm/mach-omap2/Makefile5
-rw-r--r--arch/arm/mach-omap2/board-apollon.c6
-rw-r--r--arch/arm/mach-omap2/clock.c38
-rw-r--r--arch/arm/mach-omap2/clock.h2
-rw-r--r--arch/arm/mach-omap2/devices.c47
-rw-r--r--arch/arm/mach-omap2/gpmc.c209
-rw-r--r--arch/arm/mach-omap2/id.c1
-rw-r--r--arch/arm/mach-omap2/io.c3
-rw-r--r--arch/arm/mach-omap2/irq.c1
-rw-r--r--arch/arm/mach-omap2/memory.c1
-rw-r--r--arch/arm/mach-omap2/mux.c39
-rw-r--r--arch/arm/mach-omap2/pm-domain.c300
-rw-r--r--arch/arm/mach-omap2/pm.c271
-rw-r--r--arch/arm/mach-omap2/prcm.c1
-rw-r--r--arch/arm/mach-omap2/sleep.S1
-rw-r--r--arch/arm/mach-omap2/sram-fn.S1
-rw-r--r--arch/arm/mach-omap2/timer-gp.c86
18 files changed, 903 insertions, 110 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 537dd2e6d38..aab97ccf1e6 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -8,6 +8,7 @@ config ARCH_OMAP24XX
config ARCH_OMAP2420
bool "OMAP2420 support"
depends on ARCH_OMAP24XX
+ select OMAP_DM_TIMER
comment "OMAP Board Type"
depends on ARCH_OMAP2
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 111eaa64258..266d88e77bd 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,12 +3,13 @@
#
# Common support
-obj-y := irq.o id.o io.o sram-fn.o memory.o prcm.o clock.o mux.o devices.o serial.o
+obj-y := irq.o id.o io.o sram-fn.o memory.o prcm.o clock.o mux.o devices.o \
+ serial.o gpmc.o
obj-$(CONFIG_OMAP_MPU_TIMER) += timer-gp.o
# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
+obj-$(CONFIG_PM) += pm.o pm-domain.o sleep.o
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 6c6ba172cdf..7993b7bae2b 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -234,17 +234,17 @@ static void __init apollon_sw_init(void)
set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQT_RISING);
if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
- SA_SHIRQ, "enter sw",
+ IRQF_SHARED, "enter sw",
&apollon_sw_interrupt))
return;
set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQT_RISING);
if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
- SA_SHIRQ, "up sw",
+ IRQF_SHARED, "up sw",
&apollon_sw_interrupt))
return;
set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQT_RISING);
if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
- SA_SHIRQ, "down sw",
+ IRQF_SHARED, "down sw",
&apollon_sw_interrupt))
return;
}
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 72eb4bf571a..d1b648a4efb 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -15,7 +15,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
@@ -660,26 +659,35 @@ static int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
/* Isolate control register */
div_sel = (SRC_RATE_SEL_MASK & clk->flags);
- div_off = clk->src_offset;
+ div_off = clk->rate_offset;
validrate = omap2_clksel_round_rate(clk, rate, &new_div);
- if(validrate != rate)
+ if (validrate != rate)
return(ret);
field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
if (div_sel == 0)
return ret;
- if(clk->flags & CM_SYSCLKOUT_SEL1){
- switch(new_div){
- case 16: field_val = 4; break;
- case 8: field_val = 3; break;
- case 4: field_val = 2; break;
- case 2: field_val = 1; break;
- case 1: field_val = 0; break;
+ if (clk->flags & CM_SYSCLKOUT_SEL1) {
+ switch (new_div) {
+ case 16:
+ field_val = 4;
+ break;
+ case 8:
+ field_val = 3;
+ break;
+ case 4:
+ field_val = 2;
+ break;
+ case 2:
+ field_val = 1;
+ break;
+ case 1:
+ field_val = 0;
+ break;
}
- }
- else
+ } else
field_val = new_div;
reg = (void __iomem *)div_sel;
@@ -744,7 +752,7 @@ static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset,
val = 0x2;
break;
case CM_WKUP_SEL1:
- src_reg_addr = (u32)&CM_CLKSEL2_CORE;
+ src_reg_addr = (u32)&CM_CLKSEL_WKUP;
mask = 0x3;
if (src_clk == &func_32k_ck)
val = 0x0;
@@ -784,9 +792,9 @@ static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset,
val = 0;
if (src_clk == &sys_ck)
val = 1;
- if (src_clk == &func_54m_ck)
- val = 2;
if (src_clk == &func_96m_ck)
+ val = 2;
+ if (src_clk == &func_54m_ck)
val = 3;
break;
}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 6c78d471fab..2781dfbc516 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -1062,7 +1062,7 @@ static struct clk gpt2_ick = {
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit4 */
- .enable_bit = 0,
+ .enable_bit = 4,
.recalc = &omap2_followparent_recalc,
};
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index fb7f91da1aa..aa4322451e8 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -9,7 +9,6 @@
* (at your option) any later version.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -105,6 +104,51 @@ static inline void omap_init_sti(void)
static inline void omap_init_sti(void) {}
#endif
+#if defined(CONFIG_SPI_OMAP24XX)
+
+#include <asm/arch/mcspi.h>
+
+#define OMAP2_MCSPI1_BASE 0x48098000
+#define OMAP2_MCSPI2_BASE 0x4809a000
+
+/* FIXME: use resources instead */
+
+static struct omap2_mcspi_platform_config omap2_mcspi1_config = {
+ .base = io_p2v(OMAP2_MCSPI1_BASE),
+ .num_cs = 4,
+};
+
+struct platform_device omap2_mcspi1 = {
+ .name = "omap2_mcspi",
+ .id = 1,
+ .dev = {
+ .platform_data = &omap2_mcspi1_config,
+ },
+};
+
+static struct omap2_mcspi_platform_config omap2_mcspi2_config = {
+ .base = io_p2v(OMAP2_MCSPI2_BASE),
+ .num_cs = 2,
+};
+
+struct platform_device omap2_mcspi2 = {
+ .name = "omap2_mcspi",
+ .id = 2,
+ .dev = {
+ .platform_data = &omap2_mcspi2_config,
+ },
+};
+
+static void omap_init_mcspi(void)
+{
+ platform_device_register(&omap2_mcspi1);
+ platform_device_register(&omap2_mcspi2);
+}
+
+#else
+static inline void omap_init_mcspi(void) {}
+#endif
+
/*-------------------------------------------------------------------------*/
static int __init omap2_init_devices(void)
@@ -113,6 +157,7 @@ static int __init omap2_init_devices(void)
* in alphabetical order so they're easier to sort through.
*/
omap_init_i2c();
+ omap_init_mcspi();
omap_init_sti();
return 0;
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
new file mode 100644
index 00000000000..c7a48f921fe
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -0,0 +1,209 @@
+/*
+ * GPMC support functions
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ *
+ * Author: Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+#include <asm/arch/gpmc.h>
+
+#undef DEBUG
+
+#define GPMC_BASE 0x6800a000
+#define GPMC_REVISION 0x00
+#define GPMC_SYSCONFIG 0x10
+#define GPMC_SYSSTATUS 0x14
+#define GPMC_IRQSTATUS 0x18
+#define GPMC_IRQENABLE 0x1c
+#define GPMC_TIMEOUT_CONTROL 0x40
+#define GPMC_ERR_ADDRESS 0x44
+#define GPMC_ERR_TYPE 0x48
+#define GPMC_CONFIG 0x50
+#define GPMC_STATUS 0x54
+#define GPMC_PREFETCH_CONFIG1 0x1e0
+#define GPMC_PREFETCH_CONFIG2 0x1e4
+#define GPMC_PREFETCH_CONTROL 0x1e8
+#define GPMC_PREFETCH_STATUS 0x1f0
+#define GPMC_ECC_CONFIG 0x1f4
+#define GPMC_ECC_CONTROL 0x1f8
+#define GPMC_ECC_SIZE_CONFIG 0x1fc
+
+#define GPMC_CS0 0x60
+#define GPMC_CS_SIZE 0x30
+
+static void __iomem *gpmc_base =
+ (void __iomem *) IO_ADDRESS(GPMC_BASE);
+static void __iomem *gpmc_cs_base =
+ (void __iomem *) IO_ADDRESS(GPMC_BASE) + GPMC_CS0;
+
+static struct clk *gpmc_l3_clk;
+
+static void gpmc_write_reg(int idx, u32 val)
+{
+ __raw_writel(val, gpmc_base + idx);
+}
+
+static u32 gpmc_read_reg(int idx)
+{
+ return __raw_readl(gpmc_base + idx);
+}
+
+void gpmc_cs_write_reg(int cs, int idx, u32 val)
+{
+ void __iomem *reg_addr;
+
+ reg_addr = gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx;
+ __raw_writel(val, reg_addr);
+}
+
+u32 gpmc_cs_read_reg(int cs, int idx)
+{
+ return __raw_readl(gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx);
+}
+
+/* TODO: Add support for gpmc_fck to clock framework and use it */
+static unsigned long gpmc_get_fclk_period(void)
+{
+ /* In picoseconds */
+ return 1000000000 / ((clk_get_rate(gpmc_l3_clk)) / 1000);
+}
+
+unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
+{
+ unsigned long tick_ps;
+
+ /* Calculate in picosecs to yield more exact results */
+ tick_ps = gpmc_get_fclk_period();
+
+ return (time_ns * 1000 + tick_ps - 1) / tick_ps;
+}
+
+#ifdef DEBUG
+static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
+ int time, const char *name)
+#else
+static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
+ int time)
+#endif
+{
+ u32 l;
+ int ticks, mask, nr_bits;
+
+ if (time == 0)
+ ticks = 0;
+ else
+ ticks = gpmc_ns_to_ticks(time);
+ nr_bits = end_bit - st_bit + 1;
+ if (ticks >= 1 << nr_bits)
+ return -1;
+
+ mask = (1 << nr_bits) - 1;
+ l = gpmc_cs_read_reg(cs, reg);
+#ifdef DEBUG
+ printk(KERN_INFO "GPMC CS%d: %-10s: %d ticks, %3lu ns (was %i ticks)\n",
+ cs, name, ticks, gpmc_get_fclk_period() * ticks / 1000,
+ (l >> st_bit) & mask);
+#endif
+ l &= ~(mask << st_bit);
+ l |= ticks << st_bit;
+ gpmc_cs_write_reg(cs, reg, l);
+
+ return 0;
+}
+
+#ifdef DEBUG
+#define GPMC_SET_ONE(reg, st, end, field) \
+ if (set_gpmc_timing_reg(cs, (reg), (st), (end), \
+ t->field, #field) < 0) \
+ return -1
+#else
+#define GPMC_SET_ONE(reg, st, end, field) \
+ if (set_gpmc_timing_reg(cs, (reg), (st), (end), t->field) < 0) \
+ return -1
+#endif
+
+int gpmc_cs_calc_divider(int cs, unsigned int sync_clk)
+{
+ int div;
+ u32 l;
+
+ l = sync_clk * 1000 + (gpmc_get_fclk_period() - 1);
+ div = l / gpmc_get_fclk_period();
+ if (div > 4)
+ return -1;
+ if (div < 0)
+ div = 1;
+
+ return div;
+}
+
+int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
+{
+ int div;
+ u32 l;
+
+ div = gpmc_cs_calc_divider(cs, t->sync_clk);
+ if (div < 0)
+ return -1;
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG2, 0, 3, cs_on);
+ GPMC_SET_ONE(GPMC_CS_CONFIG2, 8, 12, cs_rd_off);
+ GPMC_SET_ONE(GPMC_CS_CONFIG2, 16, 20, cs_wr_off);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG3, 0, 3, adv_on);
+ GPMC_SET_ONE(GPMC_CS_CONFIG3, 8, 12, adv_rd_off);
+ GPMC_SET_ONE(GPMC_CS_CONFIG3, 16, 20, adv_wr_off);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG4, 0, 3, oe_on);
+ GPMC_SET_ONE(GPMC_CS_CONFIG4, 8, 12, oe_off);
+ GPMC_SET_ONE(GPMC_CS_CONFIG4, 16, 19, we_on);
+ GPMC_SET_ONE(GPMC_CS_CONFIG4, 24, 28, we_off);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG5, 0, 4, rd_cycle);
+ GPMC_SET_ONE(GPMC_CS_CONFIG5, 8, 12, wr_cycle);
+ GPMC_SET_ONE(GPMC_CS_CONFIG5, 16, 20, access);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
+
+#ifdef DEBUG
+ printk(KERN_INFO "GPMC CS%d CLK period is %lu (div %d)\n",
+ cs, gpmc_get_fclk_period(), div);
+#endif
+
+ l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+ l &= ~0x03;
+ l |= (div - 1);
+
+ return 0;
+}
+
+unsigned long gpmc_cs_get_base_addr(int cs)
+{
+ return (gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7) & 0x1f) << 24;
+}
+
+void __init gpmc_init(void)
+{
+ u32 l;
+
+ gpmc_l3_clk = clk_get(NULL, "core_l3_ck");
+ BUG_ON(IS_ERR(gpmc_l3_clk));
+
+ l = gpmc_read_reg(GPMC_REVISION);
+ printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
+ /* Set smart idle mode and automatic L3 clock gating */
+ l = gpmc_read_reg(GPMC_SYSCONFIG);
+ l &= 0x03 << 3;
+ l |= (0x02 << 3) | (1 << 0);
+ gpmc_write_reg(GPMC_SYSCONFIG, l);
+}
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 76187300f2b..871ace4fccb 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -11,7 +11,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 7d5711611f2..a0728c33e5d 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -11,7 +11,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -27,6 +26,7 @@
extern void omap_sram_init(void);
extern int omap2_clk_init(void);
extern void omap2_check_revision(void);
+extern void gpmc_init(void);
/*
* The machine specific code may provide the extra mapping besides the
@@ -67,4 +67,5 @@ void __init omap2_init_common_hw(void)
{
omap2_mux_init();
omap2_clk_init();
+ gpmc_init();
}
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index d7baff675cf..3eed6a737bf 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -12,7 +12,6 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/config.h>
#include <linux/interrupt.h>
#include <asm/hardware.h>
#include <asm/mach/irq.h>
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 1d925d69fc3..85cbc2a2e66 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -14,7 +14,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 1197dc38c20..60ef084faff 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -22,7 +22,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
#include <asm/system.h>
@@ -53,6 +52,12 @@ MUX_CFG_24XX("W19_24XX_SYS_NIRQ", 0x12c, 0, 1, 1, 1)
/* 24xx clocks */
MUX_CFG_24XX("W14_24XX_SYS_CLKOUT", 0x137, 0, 1, 1, 1)
+/* 24xx GPMC wait pin monitoring */
+MUX_CFG_24XX("L3_GPMC_WAIT0", 0x09a, 0, 1, 1, 1)
+MUX_CFG_24XX("N7_GPMC_WAIT1", 0x09b, 0, 1, 1, 1)
+MUX_CFG_24XX("M1_GPMC_WAIT2", 0x09c, 0, 1, 1, 1)
+MUX_CFG_24XX("P1_GPMC_WAIT3", 0x09d, 0, 1, 1, 1)
+
/* 24xx McBSP */
MUX_CFG_24XX("Y15_24XX_MCBSP2_CLKX", 0x124, 1, 1, 0, 1)
MUX_CFG_24XX("R14_24XX_MCBSP2_FSX", 0x125, 1, 1, 0, 1)
@@ -60,18 +65,38 @@ MUX_CFG_24XX("W15_24XX_MCBSP2_DR", 0x126, 1, 1, 0, 1)
MUX_CFG_24XX("V15_24XX_MCBSP2_DX", 0x127, 1, 1, 0, 1)
/* 24xx GPIO */
-MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1)
+MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1)
MUX_CFG_24XX("AA10_242X_GPIO13", 0x0e5, 3, 0, 0, 1)
-MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1)
-MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1)
-MUX_CFG_24XX("Y11_242X_GPIO16", 0x0e8, 3, 0, 0, 1)
+MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1)
+MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1)
+MUX_CFG_24XX("Y11_242X_GPIO16", 0x0e8, 3, 0, 0, 1)
MUX_CFG_24XX("AA12_242X_GPIO17", 0x0e9, 3, 0, 0, 1)
-MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1)
+MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1)
MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1)
-MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1)
+MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1)
MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1)
MUX_CFG_24XX("V14_24XX_GPIO117", 0x128, 3, 1, 0, 1)
+/* 242x DBG GPIO */
+MUX_CFG_24XX("V4_242X_GPIO49", 0xd3, 3, 0, 0, 1)
+MUX_CFG_24XX("W2_242X_GPIO50", 0xd4, 3, 0, 0, 1)
+MUX_CFG_24XX("U4_242X_GPIO51", 0xd5, 3, 0, 0, 1)
+MUX_CFG_24XX("V3_242X_GPIO52", 0xd6, 3, 0, 0, 1)
+MUX_CFG_24XX("V2_242X_GPIO53", 0xd7, 3, 0, 0, 1)
+MUX_CFG_24XX("V6_242X_GPIO53", 0xcf, 3, 0, 0, 1)
+MUX_CFG_24XX("T4_242X_GPIO54", 0xd8, 3, 0, 0, 1)
+MUX_CFG_24XX("Y4_242X_GPIO54", 0xd0, 3, 0, 0, 1)
+MUX_CFG_24XX("T3_242X_GPIO55", 0xd9, 3, 0, 0, 1)
+MUX_CFG_24XX("U2_242X_GPIO56", 0xda, 3, 0, 0, 1)
+
+/* 24xx external DMA requests */
+MUX_CFG_24XX("AA10_242X_DMAREQ0", 0x0e5, 2, 0, 0, 1)
+MUX_CFG_24XX("AA6_242X_DMAREQ1", 0x0e6, 2, 0, 0, 1)
+MUX_CFG_24XX("E4_242X_DMAREQ2", 0x074, 2, 0, 0, 1)
+MUX_CFG_24XX("G4_242X_DMAREQ3", 0x073, 2, 0, 0, 1)
+MUX_CFG_24XX("D3_242X_DMAREQ4", 0x072, 2, 0, 0, 1)
+MUX_CFG_24XX("E3_242X_DMAREQ5", 0x071, 2, 0, 0, 1)
+
/* TSC IRQ */
MUX_CFG_24XX("P20_24XX_TSC_IRQ", 0x108, 0, 0, 0, 1)
diff --git a/arch/arm/mach-omap2/pm-domain.c b/arch/arm/mach-omap2/pm-domain.c
new file mode 100644
index 00000000000..5e20e740cde
--- /dev/null
+++ b/arch/arm/mach-omap2/pm-domain.c
@@ -0,0 +1,300 @@
+/*
+ * linux/arch/arm/mach-omap2/pm-domain.c
+ *
+ * Power domain functions for OMAP2
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * Some code based on earlier OMAP2 sample PM code
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+
+#include "prcm-regs.h"
+
+/* Power domain offsets */
+#define PM_MPU_OFFSET 0x100
+#define PM_CORE_OFFSET 0x200
+#define PM_GFX_OFFSET 0x300
+#define PM_WKUP_OFFSET 0x400 /* Autoidle only */
+#define PM_PLL_OFFSET 0x500 /* Autoidle only */
+#define PM_DSP_OFFSET 0x800
+#define PM_MDM_OFFSET 0xc00
+
+/* Power domain wake-up dependency control register */
+#define PM_WKDEP_OFFSET 0xc8
+#define EN_MDM (1 << 5)
+#define EN_WKUP (1 << 4)
+#define EN_GFX (1 << 3)
+#define EN_DSP (1 << 2)
+#define EN_MPU (1 << 1)
+#define EN_CORE (1 << 0)
+
+/* Core power domain state transition control register */
+#define PM_PWSTCTRL_OFFSET 0xe0
+#define FORCESTATE (1 << 18) /* Only for DSP & GFX */
+#define MEM4RETSTATE (1 << 6)
+#define MEM3RETSTATE (1 << 5)
+#define MEM2RETSTATE (1 << 4)
+#define MEM1RETSTATE (1 << 3)
+#define LOGICRETSTATE (1 << 2) /* Logic is retained */
+#define POWERSTATE_OFF 0x3
+#define POWERSTATE_RETENTION 0x1
+#define POWERSTATE_ON 0x0
+
+/* Power domain state register */
+#define PM_PWSTST_OFFSET 0xe4
+
+/* Hardware supervised state transition control register */
+#define CM_CLKSTCTRL_OFFSET 0x48
+#define AUTOSTAT_MPU (1 << 0) /* MPU */
+#define AUTOSTAT_DSS (1 << 2) /* Core */
+#define AUTOSTAT_L4 (1 << 1) /* Core */
+#define AUTOSTAT_L3 (1 << 0) /* Core */
+#define AUTOSTAT_GFX (1 << 0) /* GFX */
+#define AUTOSTAT_IVA (1 << 8) /* 2420 IVA in DSP domain */
+#define AUTOSTAT_DSP (1 << 0) /* DSP */
+#define AUTOSTAT_MDM (1 << 0) /* MDM */
+
+/* Automatic control of interface clock idling */
+#define CM_AUTOIDLE1_OFFSET 0x30
+#define CM_AUTOIDLE2_OFFSET 0x34 /* Core only */
+#define CM_AUTOIDLE3_OFFSET 0x38 /* Core only */
+#define CM_AUTOIDLE4_OFFSET 0x3c /* Core only */
+#define AUTO_54M(x) (((x) & 0x3) << 6)
+#define AUTO_96M(x) (((x) & 0x3) << 2)
+#define AUTO_DPLL(x) (((x) & 0x3) << 0)
+#define AUTO_STOPPED 0x3
+#define AUTO_BYPASS_FAST 0x2 /* DPLL only */
+#define AUTO_BYPASS_LOW_POWER 0x1 /* DPLL only */
+#define AUTO_DISABLED 0x0
+
+/* Voltage control PRCM_VOLTCTRL bits */
+#define AUTO_EXTVOLT (1 << 15)
+#define FORCE_EXTVOLT (1 << 14)
+#define SETOFF_LEVEL(x) (((x) & 0x3) << 12)
+#define MEMRETCTRL (1 << 8)
+#define SETRET_LEVEL(x) (((x) & 0x3) << 6)
+#define VOLT_LEVEL(x) (((x) & 0x3) << 0)
+
+#define OMAP24XX_PRCM_VBASE IO_ADDRESS(OMAP24XX_PRCM_BASE)
+#define prcm_readl(r) __raw_readl(OMAP24XX_PRCM_VBASE + (r))
+#define prcm_writel(v, r) __raw_writel((v), OMAP24XX_PRCM_VBASE + (r))
+
+static u32 pmdomain_get_wakeup_dependencies(int domain_offset)
+{
+ return prcm_readl(domain_offset + PM_WKDEP_OFFSET);
+}
+
+static void pmdomain_set_wakeup_dependencies(u32 state, int domain_offset)
+{
+ prcm_writel(state, domain_offset + PM_WKDEP_OFFSET);
+}
+
+static u32 pmdomain_get_powerstate(int domain_offset)
+{
+ return prcm_readl(domain_offset + PM_PWSTCTRL_OFFSET);
+}
+
+static void pmdomain_set_powerstate(u32 state, int domain_offset)
+{
+ prcm_writel(state, domain_offset + PM_PWSTCTRL_OFFSET);
+}
+
+static u32 pmdomain_get_clock_autocontrol(int domain_offset)
+{
+ return prcm_readl(domain_offset + CM_CLKSTCTRL_OFFSET);
+}
+
+static void pmdomain_set_clock_autocontrol(u32 state, int domain_offset)
+{
+ prcm_writel(state, domain_offset + CM_CLKSTCTRL_OFFSET);
+}
+
+static u32 pmdomain_get_clock_autoidle1(int domain_offset)
+{
+ return prcm_readl(domain_offset + CM_AUTOIDLE1_OFFSET);
+}
+
+/* Core domain only */
+static u32 pmdomain_get_clock_autoidle2(int domain_offset)
+{
+ return prcm_readl(domain_offset + CM_AUTOIDLE2_OFFSET);
+}
+
+/* Core domain only */
+static u32 pmdomain_get_clock_autoidle3(int domain_offset)
+{
+ return prcm_readl(domain_offset + CM_AUTOIDLE3_OFFSET);
+}
+
+/* Core domain only */
+static u32 pmdomain_get_clock_autoidle4(int domain_offset)
+{
+ return prcm_readl(domain_offset + CM_AUTOIDLE4_OFFSET);
+}
+
+static void pmdomain_set_clock_autoidle1(u32 state, int domain_offset)
+{
+ prcm_writel(state, CM_AUTOIDLE1_OFFSET + domain_offset);
+}
+
+/* Core domain only */
+static void pmdomain_set_clock_autoidle2(u32 state, int domain_offset)
+{
+ prcm_writel(state, CM_AUTOIDLE2_OFFSET + domain_offset);
+}
+
+/* Core domain only */
+static void pmdomain_set_clock_autoidle3(u32 state, int domain_offset)
+{
+ prcm_writel(state, CM_AUTOIDLE3_OFFSET + domain_offset);
+}
+
+/* Core domain only */
+static void pmdomain_set_clock_autoidle4(u32 state, int domain_offset)
+{
+ prcm_writel(state, CM_AUTOIDLE4_OFFSET + domain_offset);
+}
+
+/*
+ * Configures power management domains to idle clocks automatically.
+ */
+void pmdomain_set_autoidle(void)
+{
+ u32 val;
+
+ /* Set PLL auto stop for 54M, 96M & DPLL */
+ pmdomain_set_clock_autoidle1(AUTO_54M(AUTO_STOPPED) |
+ AUTO_96M(AUTO_STOPPED) |
+ AUTO_DPLL(AUTO_STOPPED), PM_PLL_OFFSET);
+
+ /* External clock input control
+ * REVISIT: Should this be in clock framework?
+ */
+ PRCM_CLKSRC_CTRL |= (0x3 << 3);
+
+ /* Configure number of 32KHz clock cycles for sys_clk */
+ PRCM_CLKSSETUP = 0x00ff;
+
+ /* Configure automatic voltage transition */
+ PRCM_VOLTSETUP = 0;
+ val = PRCM_VOLTCTRL;
+ val &= ~(SETOFF_LEVEL(0x3) | VOLT_LEVEL(0x3));
+ val |= SETOFF_LEVEL(1) | VOLT_LEVEL(1) | AUTO_EXTVOLT;
+ PRCM_VOLTCTRL = val;
+
+ /* Disable emulation tools functional clock */
+ PRCM_CLKEMUL_CTRL = 0x0;
+
+ /* Set core memory retention state */
+ val = pmdomain_get_powerstate(PM_CORE_OFFSET);
+ if (cpu_is_omap2420()) {
+ val &= ~(0x7 << 3);
+ val |= (MEM3RETSTATE | MEM2RETSTATE | MEM1RETSTATE);
+ } else {
+ val &= ~(0xf << 3);
+ val |= (MEM4RETSTATE | MEM3RETSTATE | MEM2RETSTATE |
+ MEM1RETSTATE);
+ }
+ pmdomain_set_powerstate(val, PM_CORE_OFFSET);
+
+ /* OCP interface smart idle. REVISIT: Enable autoidle bit0 ? */
+ val = SMS_SYSCONFIG;
+ val &= ~(0x3 << 3);
+ val |= (0x2 << 3) | (1 << 0);
+ SMS_SYSCONFIG |= val;
+
+ val = SDRC_SYSCONFIG;
+ val &= ~(0x3 << 3);
+ val |= (0x2 << 3);
+ SDRC_SYSCONFIG = val;
+
+ /* Configure L3 interface for smart idle.
+ * REVISIT: Enable autoidle bit0 ?
+ */
+ val = GPMC_SYSCONFIG;
+ val &= ~(0x3 << 3);
+ val |= (0x2 << 3) | (1 << 0);
+ GPMC_SYSCONFIG = val;
+
+ pmdomain_set_powerstate(LOGICRETSTATE | POWERSTATE_RETENTION,
+ PM_MPU_OFFSET);
+ pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_CORE_OFFSET);
+ if (!cpu_is_omap2420())
+ pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_MDM_OFFSET);
+
+ /* Assume suspend function has saved the state for DSP and GFX */
+ pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_DSP_OFFSET);
+ pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_GFX_OFFSET);
+
+#if 0
+ /* REVISIT: Internal USB needs special handling */
+ force_standby_usb();
+ if (cpu_is_omap2430())
+ force_hsmmc();
+ sdram_self_refresh_on_idle_req(1);
+#endif
+
+ /* Enable clock auto control for all domains.
+ * Note that CORE domain includes also DSS, L4 & L3.
+ */
+ pmdomain_set_clock_autocontrol(AUTOSTAT_MPU, PM_MPU_OFFSET);
+ pmdomain_set_clock_autocontrol(AUTOSTAT_GFX, PM_GFX_OFFSET);
+ pmdomain_set_clock_autocontrol(AUTOSTAT_DSS | AUTOSTAT_L4 | AUTOSTAT_L3,
+ PM_CORE_OFFSET);
+ if (cpu_is_omap2420())
+ pmdomain_set_clock_autocontrol(AUTOSTAT_IVA | AUTOSTAT_DSP,
+ PM_DSP_OFFSET);
+ else {
+ pmdomain_set_clock_autocontrol(AUTOSTAT_DSP, PM_DSP_OFFSET);
+ pmdomain_set_clock_autocontrol(AUTOSTAT_MDM, PM_MDM_OFFSET);
+ }
+
+ /* Enable clock autoidle for all domains */
+ pmdomain_set_clock_autoidle1(0x2, PM_DSP_OFFSET);
+ if (cpu_is_omap2420()) {
+ pmdomain_set_clock_autoidle1(0xfffffff9, PM_CORE_OFFSET);
+ pmdomain_set_clock_autoidle2(0x7, PM_CORE_OFFSET);
+ pmdomain_set_clock_autoidle1(0x3f, PM_WKUP_OFFSET);
+ } else {
+ pmdomain_set_clock_autoidle1(0xeafffff1, PM_CORE_OFFSET);
+ pmdomain_set_clock_autoidle2(0xfff, PM_CORE_OFFSET);
+ pmdomain_set_clock_autoidle1(0x7f, PM_WKUP_OFFSET);
+ pmdomain_set_clock_autoidle1(0x3, PM_MDM_OFFSET);
+ }
+ pmdomain_set_clock_autoidle3(0x7, PM_CORE_OFFSET);
+ pmdomain_set_clock_autoidle4(0x1f, PM_CORE_OFFSET);
+}
+
+/*
+ * Initializes power domains by removing wake-up dependencies and powering
+ * down DSP and GFX. Gets called from PM init. Note that DSP and IVA code
+ * must re-enable DSP and GFX when used.
+ */
+void __init pmdomain_init(void)
+{
+ /* Remove all domain wakeup dependencies */
+ pmdomain_set_wakeup_dependencies(EN_WKUP | EN_CORE, PM_MPU_OFFSET);
+ pmdomain_set_wakeup_dependencies(0, PM_DSP_OFFSET);
+ pmdomain_set_wakeup_dependencies(0, PM_GFX_OFFSET);
+ pmdomain_set_wakeup_dependencies(EN_WKUP | EN_MPU, PM_CORE_OFFSET);
+ if (cpu_is_omap2430())
+ pmdomain_set_wakeup_dependencies(0, PM_MDM_OFFSET);
+
+ /* Power down DSP and GFX */
+ pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_DSP_OFFSET);
+ pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_GFX_OFFSET);
+}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 562168fa2b1..d7eee99b7e3 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -23,6 +23,7 @@
#include <linux/interrupt.h>
#include <linux/sysfs.h>
#include <linux/module.h>
+#include <linux/delay.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -36,11 +37,18 @@
#include <asm/arch/sram.h>
#include <asm/arch/pm.h>
+#include "prcm-regs.h"
+
static struct clk *vclk;
static void (*omap2_sram_idle)(void);
static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
static void (*saved_idle)(void);
+extern void __init pmdomain_init(void);
+extern void pmdomain_set_autoidle(void);
+
+static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
+
void omap2_pm_idle(void)
{
local_irq_disable();
@@ -87,23 +95,272 @@ static int omap2_pm_prepare(suspend_state_t state)
return error;
}
+#define INT0_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK1) | \
+ OMAP_IRQ_BIT(INT_24XX_GPIO_BANK2) | \
+ OMAP_IRQ_BIT(INT_24XX_GPIO_BANK3))
+
+#define INT1_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK4))
+
+#define INT2_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_UART1_IRQ) | \
+ OMAP_IRQ_BIT(INT_24XX_UART2_IRQ) | \
+ OMAP_IRQ_BIT(INT_24XX_UART3_IRQ))
+
+#define preg(reg) printk("%s\t(0x%p):\t0x%08x\n", #reg, &reg, reg);
+
+static void omap2_pm_debug(char * desc)
+{
+ printk("%s:\n", desc);
+
+ preg(CM_CLKSTCTRL_MPU);
+ preg(CM_CLKSTCTRL_CORE);
+ preg(CM_CLKSTCTRL_GFX);
+ preg(CM_CLKSTCTRL_DSP);
+ preg(CM_CLKSTCTRL_MDM);
+
+ preg(PM_PWSTCTRL_MPU);
+ preg(PM_PWSTCTRL_CORE);
+ preg(PM_PWSTCTRL_GFX);
+ preg(PM_PWSTCTRL_DSP);
+ preg(PM_PWSTCTRL_MDM);
+
+ preg(PM_PWSTST_MPU);
+ preg(PM_PWSTST_CORE);
+ preg(PM_PWSTST_GFX);
+ preg(PM_PWSTST_DSP);
+ preg(PM_PWSTST_MDM);
+
+ preg(CM_AUTOIDLE1_CORE);
+ preg(CM_AUTOIDLE2_CORE);
+ preg(CM_AUTOIDLE3_CORE);
+ preg(CM_AUTOIDLE4_CORE);
+ preg(CM_AUTOIDLE_WKUP);
+ preg(CM_AUTOIDLE_PLL);
+ preg(CM_AUTOIDLE_DSP);
+ preg(CM_AUTOIDLE_MDM);
+
+ preg(CM_ICLKEN1_CORE);
+ preg(CM_ICLKEN2_CORE);
+ preg(CM_ICLKEN3_CORE);
+ preg(CM_ICLKEN4_CORE);
+ preg(CM_ICLKEN_GFX);
+ preg(CM_ICLKEN_WKUP);
+ preg(CM_ICLKEN_DSP);
+ preg(CM_ICLKEN_MDM);
+
+ preg(CM_IDLEST1_CORE);
+ preg(CM_IDLEST2_CORE);
+ preg(CM_IDLEST3_CORE);
+ preg(CM_IDLEST4_CORE);
+ preg(CM_IDLEST_GFX);
+ preg(CM_IDLEST_WKUP);
+ preg(CM_IDLEST_CKGEN);
+ preg(CM_IDLEST_DSP);
+ preg(CM_IDLEST_MDM);
+
+ preg(RM_RSTST_MPU);
+ preg(RM_RSTST_GFX);
+ preg(RM_RSTST_WKUP);
+ preg(RM_RSTST_DSP);
+ preg(RM_RSTST_MDM);
+
+ preg(PM_WKDEP_MPU);
+ preg(PM_WKDEP_CORE);
+ preg(PM_WKDEP_GFX);
+ preg(PM_WKDEP_DSP);
+ preg(PM_WKDEP_MDM);
+
+ preg(CM_FCLKEN_WKUP);
+ preg(CM_ICLKEN_WKUP);
+ preg(CM_IDLEST_WKUP);
+ preg(CM_AUTOIDLE_WKUP);
+ preg(CM_CLKSEL_WKUP);
+
+ preg(PM_WKEN_WKUP);
+ preg(PM_WKST_WKUP);
+}
+
+static inline void omap2_pm_save_registers(void)
+{
+ /* Save interrupt registers */
+ OMAP24XX_SAVE(INTC_MIR0);
+ OMAP24XX_SAVE(INTC_MIR1);
+ OMAP24XX_SAVE(INTC_MIR2);
+
+ /* Save power control registers */
+ OMAP24XX_SAVE(CM_CLKSTCTRL_MPU);
+ OMAP24XX_SAVE(CM_CLKSTCTRL_CORE);
+ OMAP24XX_SAVE(CM_CLKSTCTRL_GFX);
+ OMAP24XX_SAVE(CM_CLKSTCTRL_DSP);
+ OMAP24XX_SAVE(CM_CLKSTCTRL_MDM);
+
+ /* Save power state registers */
+ OMAP24XX_SAVE(PM_PWSTCTRL_MPU);
+ OMAP24XX_SAVE(PM_PWSTCTRL_CORE);
+ OMAP24XX_SAVE(PM_PWSTCTRL_GFX);
+ OMAP24XX_SAVE(PM_PWSTCTRL_DSP);
+ OMAP24XX_SAVE(PM_PWSTCTRL_MDM);
+
+ /* Save autoidle registers */
+ OMAP24XX_SAVE(CM_AUTOIDLE1_CORE);
+ OMAP24XX_SAVE(CM_AUTOIDLE2_CORE);
+ OMAP24XX_SAVE(CM_AUTOIDLE3_CORE);
+ OMAP24XX_SAVE(CM_AUTOIDLE4_CORE);
+ OMAP24XX_SAVE(CM_AUTOIDLE_WKUP);
+ OMAP24XX_SAVE(CM_AUTOIDLE_PLL);
+ OMAP24XX_SAVE(CM_AUTOIDLE_DSP);
+ OMAP24XX_SAVE(CM_AUTOIDLE_MDM);
+
+ /* Save idle state registers */
+ OMAP24XX_SAVE(CM_IDLEST1_CORE);
+ OMAP24XX_SAVE(CM_IDLEST2_CORE);
+ OMAP24XX_SAVE(CM_IDLEST3_CORE);
+ OMAP24XX_SAVE(CM_IDLEST4_CORE);
+ OMAP24XX_SAVE(CM_IDLEST_GFX);
+ OMAP24XX_SAVE(CM_IDLEST_WKUP);
+ OMAP24XX_SAVE(CM_IDLEST_CKGEN);
+ OMAP24XX_SAVE(CM_IDLEST_DSP);
+ OMAP24XX_SAVE(CM_IDLEST_MDM);
+
+ /* Save clock registers */
+ OMAP24XX_SAVE(CM_FCLKEN1_CORE);
+ OMAP24XX_SAVE(CM_FCLKEN2_CORE);
+ OMAP24XX_SAVE(CM_ICLKEN1_CORE);
+ OMAP24XX_SAVE(CM_ICLKEN2_CORE);
+ OMAP24XX_SAVE(CM_ICLKEN3_CORE);
+ OMAP24XX_SAVE(CM_ICLKEN4_CORE);
+}
+
+static inline void omap2_pm_restore_registers(void)
+{
+ /* Restore clock state registers */
+ OMAP24XX_RESTORE(CM_CLKSTCTRL_MPU);
+ OMAP24XX_RESTORE(CM_CLKSTCTRL_CORE);
+ OMAP24XX_RESTORE(CM_CLKSTCTRL_GFX);
+ OMAP24XX_RESTORE(CM_CLKSTCTRL_DSP);
+ OMAP24XX_RESTORE(CM_CLKSTCTRL_MDM);
+
+ /* Restore power state registers */
+ OMAP24XX_RESTORE(PM_PWSTCTRL_MPU);
+ OMAP24XX_RESTORE(PM_PWSTCTRL_CORE);
+ OMAP24XX_RESTORE(PM_PWSTCTRL_GFX);
+ OMAP24XX_RESTORE(PM_PWSTCTRL_DSP);
+ OMAP24XX_RESTORE(PM_PWSTCTRL_MDM);
+
+ /* Restore idle state registers */
+ OMAP24XX_RESTORE(CM_IDLEST1_CORE);
+ OMAP24XX_RESTORE(CM_IDLEST2_CORE);
+ OMAP24XX_RESTORE(CM_IDLEST3_CORE);
+ OMAP24XX_RESTORE(CM_IDLEST4_CORE);
+ OMAP24XX_RESTORE(CM_IDLEST_GFX);
+ OMAP24XX_RESTORE(CM_IDLEST_WKUP);
+ OMAP24XX_RESTORE(CM_IDLEST_CKGEN);
+ OMAP24XX_RESTORE(CM_IDLEST_DSP);
+ OMAP24XX_RESTORE(CM_IDLEST_MDM);
+
+ /* Restore autoidle registers */
+ OMAP24XX_RESTORE(CM_AUTOIDLE1_CORE);
+ OMAP24XX_RESTORE(CM_AUTOIDLE2_CORE);
+ OMAP24XX_RESTORE(CM_AUTOIDLE3_CORE);
+ OMAP24XX_RESTORE(CM_AUTOIDLE4_CORE);
+ OMAP24XX_RESTORE(CM_AUTOIDLE_WKUP);
+ OMAP24XX_RESTORE(CM_AUTOIDLE_PLL);
+ OMAP24XX_RESTORE(CM_AUTOIDLE_DSP);
+ OMAP24XX_RESTORE(CM_AUTOIDLE_MDM);
+
+ /* Restore clock registers */
+ OMAP24XX_RESTORE(CM_FCLKEN1_CORE);
+ OMAP24XX_RESTORE(CM_FCLKEN2_CORE);
+ OMAP24XX_RESTORE(CM_ICLKEN1_CORE);
+ OMAP24XX_RESTORE(CM_ICLKEN2_CORE);
+ OMAP24XX_RESTORE(CM_ICLKEN3_CORE);
+ OMAP24XX_RESTORE(CM_ICLKEN4_CORE);
+
+ /* REVISIT: Clear interrupts here */
+
+ /* Restore interrupt registers */
+ OMAP24XX_RESTORE(INTC_MIR0);
+ OMAP24XX_RESTORE(INTC_MIR1);
+ OMAP24XX_RESTORE(INTC_MIR2);
+}
+
+static int omap2_pm_suspend(void)
+{
+ int processor_type = 0;
+
+ /* REVISIT: 0x21 or 0x26? */
+ if (cpu_is_omap2420())
+ processor_type = 0x21;
+
+ if (!processor_type)
+ return -ENOTSUPP;
+
+ local_irq_disable();
+ local_fiq_disable();
+
+ omap2_pm_save_registers();
+
+ /* Disable interrupts except for the wake events */
+ INTC_MIR_SET0 = 0xffffffff & ~INT0_WAKE_MASK;
+ INTC_MIR_SET1 = 0xffffffff & ~INT1_WAKE_MASK;
+ INTC_MIR_SET2 = 0xffffffff & ~INT2_WAKE_MASK;
+
+ pmdomain_set_autoidle();
+
+ /* Clear old wake-up events */
+ PM_WKST1_CORE = 0;
+ PM_WKST2_CORE = 0;
+ PM_WKST_WKUP = 0;
+
+ /* Enable wake-up events */
+ PM_WKEN1_CORE = (1 << 22) | (1 << 21); /* UART1 & 2 */
+ PM_WKEN2_CORE = (1 << 2); /* UART3 */
+ PM_WKEN_WKUP = (1 << 2) | (1 << 0); /* GPIO & GPT1 */
+
+ /* Disable clocks except for CM_ICLKEN2_CORE. It gets disabled
+ * in the SRAM suspend code */
+ CM_FCLKEN1_CORE = 0;
+ CM_FCLKEN2_CORE = 0;
+ CM_ICLKEN1_CORE = 0;
+ CM_ICLKEN3_CORE = 0;
+ CM_ICLKEN4_CORE = 0;
+
+ omap2_pm_debug("Status before suspend");
+
+ /* Must wait for serial buffers to clear */
+ mdelay(200);
+
+ /* Jump to SRAM suspend code
+ * REVISIT: When is this SDRC_DLLB_CTRL?
+ */
+ omap2_sram_suspend(SDRC_DLLA_CTRL, processor_type);
+
+ /* Back from sleep */
+ omap2_pm_restore_registers();
+
+ local_fiq_enable();
+ local_irq_enable();
+
+ return 0;
+}
+
static int omap2_pm_enter(suspend_state_t state)
{
+ int ret = 0;
+
switch (state)
{
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
- /* FIXME: Add suspend */
+ ret = omap2_pm_suspend();
break;
-
case PM_SUSPEND_DISK:
- return -ENOTSUPP;
-
+ ret = -ENOTSUPP;
+ break;
default:
- return -EINVAL;
+ ret = -EINVAL;
}
- return 0;
+ return ret;
}
static int omap2_pm_finish(suspend_state_t state)
@@ -143,6 +400,8 @@ int __init omap2_pm_init(void)
pm_set_ops(&omap_pm_ops);
pm_idle = omap2_pm_idle;
+ pmdomain_init();
+
return 0;
}
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 8893479dc7e..c2bf57ef682 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -13,7 +13,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/clk.h>
diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep.S
index 00299cbeb91..16247d55785 100644
--- a/arch/arm/mach-omap2/sleep.S
+++ b/arch/arm/mach-omap2/sleep.S
@@ -21,7 +21,6 @@
* MA 02111-1307 USA
*/
-#include <linux/config.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/arch/io.h>
diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram-fn.S
index d261e4ff4d9..a5ef7f611da 100644
--- a/arch/arm/mach-omap2/sram-fn.S
+++ b/arch/arm/mach-omap2/sram-fn.S
@@ -22,7 +22,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
-#include <linux/config.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/arch/io.h>
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 1d2f5ac2f69..fe5fd6d42de 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -6,6 +6,7 @@
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
* Juha Yrjölä <juha.yrjola@nokia.com>
+ * OMAP Dual-mode timer framework support by Timo Teras
*
* Some parts based off of TI's 24xx code:
*
@@ -22,54 +23,18 @@
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/delay.h>
#include <asm/mach/time.h>
-#include <asm/delay.h>
-#include <asm/io.h>
+#include <asm/arch/dmtimer.h>
-#define OMAP2_GP_TIMER1_BASE 0x48028000
-#define OMAP2_GP_TIMER2_BASE 0x4802a000
-#define OMAP2_GP_TIMER3_BASE 0x48078000
-#define OMAP2_GP_TIMER4_BASE 0x4807a000
+static struct omap_dm_timer *gptimer;
-#define GP_TIMER_TIDR 0x00
-#define GP_TIMER_TISR 0x18
-#define GP_TIMER_TIER 0x1c
-#define GP_TIMER_TCLR 0x24
-#define GP_TIMER_TCRR 0x28
-#define GP_TIMER_TLDR 0x2c
-#define GP_TIMER_TSICR 0x40
-
-#define OS_TIMER_NR 1 /* GP timer 2 */
-
-static unsigned long timer_base[] = {
- IO_ADDRESS(OMAP2_GP_TIMER1_BASE),
- IO_ADDRESS(OMAP2_GP_TIMER2_BASE),
- IO_ADDRESS(OMAP2_GP_TIMER3_BASE),
- IO_ADDRESS(OMAP2_GP_TIMER4_BASE),
-};
-
-static inline unsigned int timer_read_reg(int nr, unsigned int reg)
-{
- return __raw_readl(timer_base[nr] + reg);
-}
-
-static inline void timer_write_reg(int nr, unsigned int reg, unsigned int val)
-{
- __raw_writel(val, timer_base[nr] + reg);
-}
-
-/* Note that we always enable the clock prescale divider bit */
-static inline void omap2_gp_timer_start(int nr, unsigned long load_val)
+static inline void omap2_gp_timer_start(unsigned long load_val)
{
- unsigned int tmp;
-
- tmp = 0xffffffff - load_val;
-
- timer_write_reg(nr, GP_TIMER_TLDR, tmp);
- timer_write_reg(nr, GP_TIMER_TCRR, tmp);
- timer_write_reg(nr, GP_TIMER_TIER, 1 << 1);
- timer_write_reg(nr, GP_TIMER_TCLR, (1 << 5) | (1 << 1) | 1);
+ omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val);
+ omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
+ omap_dm_timer_start(gptimer);
}
static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id,
@@ -77,7 +42,7 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id,
{
write_seqlock(&xtime_lock);
- timer_write_reg(OS_TIMER_NR, GP_TIMER_TISR, 1 << 1);
+ omap_dm_timer_write_status(gptimer, OMAP_TIMER_INT_OVERFLOW);
timer_tick(regs);
write_sequnlock(&xtime_lock);
@@ -87,41 +52,26 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id,
static struct irqaction omap2_gp_timer_irq = {
.name = "gp timer",
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = omap2_gp_timer_interrupt,
};
static void __init omap2_gp_timer_init(void)
{
- struct clk * sys_ck;
- u32 tick_period = 120000;
- u32 l;
+ u32 tick_period;
- /* Reset clock and prescale value */
- timer_write_reg(OS_TIMER_NR, GP_TIMER_TCLR, 0);
+ omap_dm_timer_init();
+ gptimer = omap_dm_timer_request_specific(1);
+ BUG_ON(gptimer == NULL);
- sys_ck = clk_get(NULL, "sys_ck");
- if (IS_ERR(sys_ck))
- printk(KERN_ERR "Could not get sys_ck\n");
- else {
- clk_enable(sys_ck);
- tick_period = clk_get_rate(sys_ck) / 100;
- clk_put(sys_ck);
- }
-
- tick_period /= 2; /* Minimum prescale divider is 2 */
+ omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
+ tick_period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / 100;
tick_period -= 1;
- l = timer_read_reg(OS_TIMER_NR, GP_TIMER_TIDR);
- printk(KERN_INFO "OMAP2 GP timer (HW version %d.%d)\n",
- (l >> 4) & 0x0f, l & 0x0f);
-
- setup_irq(38, &omap2_gp_timer_irq);
-
- omap2_gp_timer_start(OS_TIMER_NR, tick_period);
+ setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
+ omap2_gp_timer_start(tick_period);
}
struct sys_timer omap_timer = {
.init = omap2_gp_timer_init,
};
-
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-29 09:17:17 +0000