diff options
Diffstat (limited to 'arch/arm/mach-omap2')
37 files changed, 110 insertions, 175 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index a45cd640968..66dfbccacd2 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -59,16 +59,16 @@ endif # Power Management ifeq ($(CONFIG_PM),y) obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o -obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o +obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o \ - cpuidle34xx.o pm_bus.o -obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o pm_bus.o + cpuidle34xx.o +obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o AFLAGS_sleep24xx.o :=-Wa,-march=armv6 -AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a +AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec) ifeq ($(CONFIG_PM_VERBOSE),y) CFLAGS_pm_bus.o += -DDEBUG diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 5f8a2fd0633..34cf982b967 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -696,7 +696,7 @@ static void __init igep2_init(void) igep2_init_smsc911x(); /* - * WLAN-BT combo module from MuRata wich has a Marvell WLAN + * WLAN-BT combo module from MuRata which has a Marvell WLAN * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. */ igep2_wlan_bt_init(); diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index b10db0e6ee6..2cf86c3cb1a 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -440,7 +440,7 @@ static void __init igep3_init(void) igep3_leds_init(); /* - * WLAN-BT combo module from MuRata wich has a Marvell WLAN + * WLAN-BT combo module from MuRata which has a Marvell WLAN * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. */ igep3_wifi_bt_init(); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index c936c6d7ded..f3a7b101191 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -285,19 +285,6 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } -static struct regulator_init_data omap4_panda_vaux1 = { - .constraints = { - .min_uV = 1000000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - static struct regulator_init_data omap4_panda_vaux2 = { .constraints = { .min_uV = 1200000, @@ -353,19 +340,6 @@ static struct regulator_init_data omap4_panda_vpp = { }, }; -static struct regulator_init_data omap4_panda_vusim = { - .constraints = { - .min_uV = 1200000, - .max_uV = 2900000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - static struct regulator_init_data omap4_panda_vana = { .constraints = { .min_uV = 2100000, @@ -424,12 +398,10 @@ static struct twl4030_platform_data omap4_panda_twldata = { /* Regulators */ .vmmc = &omap4_panda_vmmc, .vpp = &omap4_panda_vpp, - .vusim = &omap4_panda_vusim, .vana = &omap4_panda_vana, .vcxio = &omap4_panda_vcxio, .vdac = &omap4_panda_vdac, .vusb = &omap4_panda_vusb, - .vaux1 = &omap4_panda_vaux1, .vaux2 = &omap4_panda_vaux2, .vaux3 = &omap4_panda_vaux3, .clk32kg = &omap4_panda_clk32kg, diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index e964895b80e..f8ba20a14e6 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -141,14 +141,19 @@ static void __init rx51_init(void) static void __init rx51_map_io(void) { omap2_set_globals_3xxx(); - rx51_video_mem_init(); omap34xx_map_common_io(); } +static void __init rx51_reserve(void) +{ + rx51_video_mem_init(); + omap_reserve(); +} + MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */ .boot_params = 0x80000100, - .reserve = omap_reserve, + .reserve = rx51_reserve, .map_io = rx51_map_io, .init_early = rx51_init_early, .init_irq = omap_init_irq, diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c index b2b1e37bb6b..d6e34dd9e7e 100644 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c @@ -115,6 +115,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, 0, 0, 0, 0); + clk->rate = rate; return 0; } diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 276992d3b7f..8c965671b4d 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3116,14 +3116,9 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "dsp_fck", &dsp_fck, CK_443X), CLK("omapdss_dss", "sys_clk", &dss_sys_clk, CK_443X), CLK("omapdss_dss", "tv_clk", &dss_tv_clk, CK_443X), - CLK("omapdss_dss", "dss_clk", &dss_dss_clk, CK_443X), CLK("omapdss_dss", "video_clk", &dss_48mhz_clk, CK_443X), - CLK("omapdss_dss", "fck", &dss_fck, CK_443X), - /* - * On OMAP4, DSS ick is a dummy clock; this is needed for compatibility - * with OMAP2/3. - */ - CLK("omapdss_dss", "ick", &dummy_ck, CK_443X), + CLK("omapdss_dss", "fck", &dss_dss_clk, CK_443X), + CLK("omapdss_dss", "ick", &dss_fck, CK_443X), CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X), CLK(NULL, "emif1_fck", &emif1_fck, CK_443X), CLK(NULL, "emif2_fck", &emif2_fck, CK_443X), diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index ab878545bd9..6cb6c03293d 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -258,7 +258,7 @@ static void _resolve_clkdm_deps(struct clockdomain *clkdm, * clkdm_init - set up the clockdomain layer * @clkdms: optional pointer to an array of clockdomains to register * @init_autodeps: optional pointer to an array of autodeps to register - * @custom_funcs: func pointers for arch specfic implementations + * @custom_funcs: func pointers for arch specific implementations * * Set up internal state. If a pointer to an array of clockdomains * @clkdms was supplied, loop through the list of clockdomains, diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 85b3dce6564..5823584d9cd 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -125,7 +125,7 @@ struct clockdomain { }; /** - * struct clkdm_ops - Arch specfic function implementations + * struct clkdm_ops - Arch specific function implementations * @clkdm_add_wkdep: Add a wakeup dependency between clk domains * @clkdm_del_wkdep: Delete a wakeup dependency between clk domains * @clkdm_read_wkdep: Read wakeup dependency state between clk domains diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c index 9d0dec806e9..38830d8d478 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c @@ -247,6 +247,7 @@ struct omap3_cm_regs { u32 per_cm_clksel; u32 emu_cm_clksel; u32 emu_cm_clkstctrl; + u32 pll_cm_autoidle; u32 pll_cm_autoidle2; u32 pll_cm_clksel4; u32 pll_cm_clksel5; @@ -319,6 +320,15 @@ void omap3_cm_save_context(void) omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1); cm_context.emu_cm_clkstctrl = omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL); + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1. + * In this case, even though this register has been saved in + * scratchpad contents, we need to restore AUTO_PERIPH_DPLL + * by ourselves. So, we need to save it anyway. + */ + cm_context.pll_cm_autoidle = + omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); cm_context.pll_cm_autoidle2 = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2); cm_context.pll_cm_clksel4 = @@ -441,6 +451,13 @@ void omap3_cm_restore_context(void) CM_CLKSEL1); omap2_cm_write_mod_reg(cm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL); + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1. + * In this case, we need to restore AUTO_PERIPH_DPLL by ourselves. + */ + omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle, PLL_MOD, + CM_AUTOIDLE); omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle2, PLL_MOD, CM_AUTOIDLE2); omap2_cm_write_mod_reg(cm_context.pll_cm_clksel4, PLL_MOD, diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 69527941902..da53ba3917c 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -316,8 +316,14 @@ void omap3_save_scratchpad_contents(void) omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL); prcm_block_contents.cm_clken_pll = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1. + * Then, in anycase, clear these bits to avoid extra latencies. + */ prcm_block_contents.cm_autoidle_pll = - omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL); + omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) & + ~OMAP3430_AUTO_PERIPH_DPLL_MASK; prcm_block_contents.cm_clksel1_pll = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL); prcm_block_contents.cm_clksel2_pll = diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index a44c5230340..1c240eff391 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -297,8 +297,8 @@ DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); /** * omap3_cpuidle_update_states() - Update the cpuidle states - * @mpu_deepest_state: Enable states upto and including this for mpu domain - * @core_deepest_state: Enable states upto and including this for core domain + * @mpu_deepest_state: Enable states up to and including this for mpu domain + * @core_deepest_state: Enable states up to and including this for core domain * * This goes through the list of states available and enables and disables the * validity of C states based on deepest state that can be achieved for the diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index e9785149284..7b855856459 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -66,7 +66,7 @@ static int __init omap3_l3_init(void) WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name); - return PTR_ERR(od); + return IS_ERR(od) ? PTR_ERR(od) : 0; } postcore_initcall(omap3_l3_init); @@ -253,7 +253,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data ARRAY_SIZE(omap_keyboard_latency), 0); if (IS_ERR(od)) { - WARN(1, "Cant build omap_device for %s:%s.\n", + WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); return PTR_ERR(od); } @@ -373,7 +373,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) od = omap_device_build(name, spi_num, oh, pdata, sizeof(*pdata), omap_mcspi_latency, ARRAY_SIZE(omap_mcspi_latency), 0); - WARN(IS_ERR(od), "Cant build omap_device for %s:%s\n", + WARN(IS_ERR(od), "Can't build omap_device for %s:%s\n", name, oh->name); kfree(pdata); return 0; @@ -725,7 +725,7 @@ static int __init omap_init_wdt(void) od = omap_device_build(dev_name, id, oh, NULL, 0, omap_wdt_latency, ARRAY_SIZE(omap_wdt_latency), 0); - WARN(IS_ERR(od), "Cant build omap_device for %s:%s.\n", + WARN(IS_ERR(od), "Can't build omap_device for %s:%s.\n", dev_name, oh->name); return 0; } diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index 34922b2d2e3..c9ff0e79703 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -262,7 +262,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0); kfree(p); if (IS_ERR(od)) { - pr_err("%s: Cant build omap_device for %s:%s.\n", + pr_err("%s: Can't build omap_device for %s:%s.\n", __func__, name, oh->name); return PTR_ERR(od); } diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 413de18c1d2..9529842ae05 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -82,7 +82,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) kfree(pdata); if (IS_ERR(od)) { - WARN(1, "Cant build omap_device for %s:%s.\n", + WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); return PTR_ERR(od); } diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 674174365f7..130034bf01d 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -693,6 +693,7 @@ static int __init gpmc_init(void) { u32 l, irq; int cs, ret = -EINVAL; + int gpmc_irq; char *ck = NULL; if (cpu_is_omap24xx()) { @@ -701,12 +702,15 @@ static int __init gpmc_init(void) l = OMAP2420_GPMC_BASE; else l = OMAP34XX_GPMC_BASE; + gpmc_irq = INT_34XX_GPMC_IRQ; } else if (cpu_is_omap34xx()) { ck = "gpmc_fck"; l = OMAP34XX_GPMC_BASE; + gpmc_irq = INT_34XX_GPMC_IRQ; } else if (cpu_is_omap44xx()) { ck = "gpmc_ck"; l = OMAP44XX_GPMC_BASE; + gpmc_irq = OMAP44XX_IRQ_GPMC; } if (WARN_ON(!ck)) @@ -739,16 +743,17 @@ static int __init gpmc_init(void) /* initalize the irq_chained */ irq = OMAP_GPMC_IRQ_BASE; for (cs = 0; cs < GPMC_CS_NUM; cs++) { - set_irq_handler(irq, handle_simple_irq); + irq_set_chip_and_handler(irq, &dummy_irq_chip, + handle_simple_irq); set_irq_flags(irq, IRQF_VALID); irq++; } - ret = request_irq(INT_34XX_GPMC_IRQ, + ret = request_irq(gpmc_irq, gpmc_handle_irq, IRQF_SHARED, "gpmc", gpmc_base); if (ret) pr_err("gpmc: irq-%d could not claim: err %d\n", - INT_34XX_GPMC_IRQ, ret); + gpmc_irq, ret); return ret; } postcore_initcall(gpmc_init); @@ -757,8 +762,6 @@ static irqreturn_t gpmc_handle_irq(int irq, void *dev) { u8 cs; - if (irq != INT_34XX_GPMC_IRQ) - return IRQ_HANDLED; /* check cs to invoke the irq */ cs = ((gpmc_read_reg(GPMC_PREFETCH_CONFIG1)) >> CS_NUM_SHIFT) & 0x7; if (OMAP_GPMC_IRQ_BASE+cs <= OMAP_GPMC_IRQ_END) diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 137e1a5f3d8..b2f30bed5a2 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -465,7 +465,7 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data, sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false); if (IS_ERR(od)) { - WARN(1, "Cant build omap_device for %s:%s.\n", name, oh->name); + WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); kfree(mmc_data->slots[0].name); goto done; } diff --git a/arch/arm/mach-omap2/include/mach/omap4-common.h b/arch/arm/mach-omap2/include/mach/omap4-common.h index de441c05a6a..e4bd8761973 100644 --- a/arch/arm/mach-omap2/include/mach/omap4-common.h +++ b/arch/arm/mach-omap2/include/mach/omap4-common.h @@ -33,4 +33,11 @@ extern void __iomem *gic_dist_base_addr; extern void __init gic_init_irq(void); extern void omap_smc1(u32 fn, u32 arg); +#ifdef CONFIG_SMP +/* Needed for secondary core boot */ +extern void omap_secondary_startup(void); +extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); +extern void omap_auxcoreboot_addr(u32 cpu_addr); +extern u32 omap_read_auxcoreboot0(void); +#endif #endif diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index bc524b94fd5..237e4530abf 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -223,8 +223,7 @@ void __init omap_init_irq(void) nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : ""); for (i = 0; i < nr_of_irqs; i++) { - set_irq_chip(i, &omap_irq_chip); - set_irq_handler(i, handle_level_irq); + irq_set_chip_and_handler(i, &omap_irq_chip, handle_level_irq); set_irq_flags(i, IRQF_VALID); } } diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 565b9064a32..4a6ef6ab845 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -149,7 +149,7 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) ARRAY_SIZE(omap2_mcbsp_latency), false); kfree(pdata); if (IS_ERR(od)) { - pr_err("%s: Cant build omap_device for %s:%s.\n", __func__, + pr_err("%s: Can't build omap_device for %s:%s.\n", __func__, name, oh->name); return PTR_ERR(od); } diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index bb043cbb388..a4ab1e36431 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -518,7 +518,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused) seq_printf(s, "/* %s */\n", m->muxnames[mode]); /* - * XXX: Might be revisited to support differences accross + * XXX: Might be revisited to support differences across * same OMAP generation. */ seq_printf(s, "OMAP%d_MUX(%s, ", omap_gen, m0_def); diff --git a/arch/arm/mach-omap2/mux2430.h b/arch/arm/mach-omap2/mux2430.h index adbea0d03e0..9fd93149ebd 100644 --- a/arch/arm/mach-omap2/mux2430.h +++ b/arch/arm/mach-omap2/mux2430.h @@ -22,7 +22,7 @@ * absolute addresses. The name in the macro is the mode-0 name of * the pin. NOTE: These registers are 8-bits wide. * - * Note that these defines use SDMMC instead of MMC for compability + * Note that these defines use SDMMC instead of MMC for compatibility * with signal names used in 3630. */ #define OMAP2430_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x000 diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index b66cfe8bc46..ecfe93c4b58 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -21,6 +21,7 @@ #include <linux/io.h> #include <asm/cacheflush.h> +#include <asm/hardware/gic.h> #include <asm/smp_scu.h> #include <mach/hardware.h> #include <mach/omap4-common.h> @@ -63,7 +64,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) omap_modify_auxcoreboot0(0x200, 0xfffffdff); flush_cache_all(); smp_wmb(); - smp_cross_call(cpumask_of(cpu), 1); + gic_raise_softirq(cpumask_of(cpu), 1); /* * Now the secondary core is starting up let it run its @@ -118,6 +119,8 @@ void __init smp_init_cpus(void) for (i = 0; i < ncores; i++) set_cpu_possible(i, true); + + set_smp_cross_call(gic_raise_softirq); } void __init platform_smp_prepare_cpus(unsigned int max_cpus) diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 8eb3ce1bbfb..c4d0ae87d62 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1639,6 +1639,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = { static struct omap_hwmod omap2420_gpio1_hwmod = { .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio1_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio1_irqs), .main_clk = "gpios_fck", @@ -1669,6 +1670,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = { static struct omap_hwmod omap2420_gpio2_hwmod = { .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio2_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio2_irqs), .main_clk = "gpios_fck", @@ -1699,6 +1701,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = { static struct omap_hwmod omap2420_gpio3_hwmod = { .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio3_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio3_irqs), .main_clk = "gpios_fck", @@ -1729,6 +1732,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = { static struct omap_hwmod omap2420_gpio4_hwmod = { .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio4_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio4_irqs), .main_clk = "gpios_fck", @@ -1782,7 +1786,7 @@ static struct omap_hwmod_irq_info omap2420_dma_system_irqs[] = { static struct omap_hwmod_addr_space omap2420_dma_system_addrs[] = { { .pa_start = 0x48056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x48056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index a860fb5024c..9682dd519f8 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1559,7 +1559,7 @@ static struct omap_hwmod omap2430_i2c1_hwmod = { * I2CHS IP's do not follow the usual pattern. * prcm_reg_id alone cannot be used to program * the iclk and fclk. Needs to be handled using - * additonal flags when clk handling is moved + * additional flags when clk handling is moved * to hwmod framework. */ .module_offs = CORE_MOD, @@ -1742,6 +1742,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = { static struct omap_hwmod omap2430_gpio1_hwmod = { .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio1_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio1_irqs), .main_clk = "gpios_fck", @@ -1772,6 +1773,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = { static struct omap_hwmod omap2430_gpio2_hwmod = { .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio2_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio2_irqs), .main_clk = "gpios_fck", @@ -1802,6 +1804,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = { static struct omap_hwmod omap2430_gpio3_hwmod = { .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio3_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio3_irqs), .main_clk = "gpios_fck", @@ -1832,6 +1835,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = { static struct omap_hwmod omap2430_gpio4_hwmod = { .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio4_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio4_irqs), .main_clk = "gpios_fck", @@ -1862,6 +1866,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = { static struct omap_hwmod omap2430_gpio5_hwmod = { .name = "gpio5", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio5_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio5_irqs), .main_clk = "gpio5_fck", @@ -1915,7 +1920,7 @@ static struct omap_hwmod_irq_info omap2430_dma_system_irqs[] = { static struct omap_hwmod_addr_space omap2430_dma_system_addrs[] = { { .pa_start = 0x48056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x48056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index b98e2dfcba2..909a84de668 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -2141,6 +2141,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = { static struct omap_hwmod omap3xxx_gpio1_hwmod = { .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio1_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio1_irqs), .main_clk = "gpio1_ick", @@ -2177,6 +2178,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = { static struct omap_hwmod omap3xxx_gpio2_hwmod = { .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio2_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio2_irqs), .main_clk = "gpio2_ick", @@ -2213,6 +2215,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = { static struct omap_hwmod omap3xxx_gpio3_hwmod = { .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio3_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio3_irqs), .main_clk = "gpio3_ick", @@ -2249,6 +2252,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = { static struct omap_hwmod omap3xxx_gpio4_hwmod = { .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio4_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio4_irqs), .main_clk = "gpio4_ick", @@ -2285,6 +2289,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = { static struct omap_hwmod omap3xxx_gpio5_hwmod = { .name = "gpio5", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio5_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio5_irqs), .main_clk = "gpio5_ick", @@ -2321,6 +2326,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = { static struct omap_hwmod omap3xxx_gpio6_hwmod = { .name = "gpio6", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio6_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio6_irqs), .main_clk = "gpio6_ick", @@ -2386,7 +2392,7 @@ static struct omap_hwmod_irq_info omap3xxx_dma_system_irqs[] = { static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = { { .pa_start = 0x48056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x48056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 3e88dd3f8ef..abc548a0c98 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -885,7 +885,7 @@ static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = { static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = { { .pa_start = 0x4a056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x4a056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index 265bff3acb9..4321e793892 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -196,11 +196,11 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) /* No timeout error for debug sources */ } - base = ((l3->rt) + (*(omap3_l3_bases[int_type] + err_source))); - /* identify the error source */ for (err_source = 0; !(status & (1 << err_source)); err_source++) ; + + base = l3->rt + *(omap3_l3_bases[int_type] + err_source); error = omap3_l3_readll(base, L3_ERROR_LOG); if (error) { @@ -226,7 +226,6 @@ static int __init omap3_l3_probe(struct platform_device *pdev) struct omap3_l3 *l3; struct resource *res; int ret; - int irq; l3 = kzalloc(sizeof(*l3), GFP_KERNEL); if (!l3) { @@ -249,18 +248,17 @@ static int __init omap3_l3_probe(struct platform_device *pdev) goto err2; } - irq = platform_get_irq(pdev, 0); - ret = request_irq(irq, omap3_l3_app_irq, + l3->debug_irq = platform_get_irq(pdev, 0); + ret = request_irq(l3->debug_irq, omap3_l3_app_irq, IRQF_DISABLED | IRQF_TRIGGER_RISING, "l3-debug-irq", l3); if (ret) { dev_err(&pdev->dev, "couldn't request debug irq\n"); goto err3; } - l3->debug_irq = irq; - irq = platform_get_irq(pdev, 1); - ret = request_irq(irq, omap3_l3_app_irq, + l3->app_irq = platform_get_irq(pdev, 1); + ret = request_irq(l3->app_irq, omap3_l3_app_irq, IRQF_DISABLED | IRQF_TRIGGER_RISING, "l3-app-irq", l3); @@ -269,7 +267,6 @@ static int __init omap3_l3_probe(struct platform_device *pdev) goto err4; } - l3->app_irq = irq; goto err0; err4: diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index e2e605fe913..05f6abc96b0 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -112,12 +112,12 @@ int omap4430_phy_power(struct device *dev, int ID, int on) else /* * Enable VBUS Valid, AValid and IDDIG - * high impedence + * high impedance */ __raw_writel(IDDIG | AVALID | VBUSVALID, ctrl_base + USBOTGHS_CONTROL); } else { - /* Enable session END and IDIG to high impedence. */ + /* Enable session END and IDIG to high impedance. */ __raw_writel(SESSEND | IDDIG, ctrl_base + USBOTGHS_CONTROL); } diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 0a8e74e3e81..07d6140baa9 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -308,7 +308,7 @@ int __init omap3_twl_init(void) * Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages, * in those scenarios this bit is to be cleared (enable = false). * - * Returns 0 on sucess, error is returned if I2C read/write fails. + * Returns 0 on success, error is returned if I2C read/write fails. */ int __init omap3_twl_set_sr_bit(bool enable) { diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 30af3351c2d..49486f522dc 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -89,6 +89,7 @@ static void omap2_init_processor_devices(void) if (cpu_is_omap44xx()) { _init_omap_device("l3_main_1", &l3_dev); _init_omap_device("dsp", &dsp_dev); + _init_omap_device("iva", &iva_dev); } else { _init_omap_device("l3_main", &l3_dev); } diff --git a/arch/arm/mach-omap2/pm_bus.c b/arch/arm/mach-omap2/pm_bus.c deleted file mode 100644 index 5acd2ab298b..00000000000 --- a/arch/arm/mach-omap2/pm_bus.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Runtime PM support code for OMAP - * - * Author: Kevin Hilman, Deep Root Systems, LLC - * - * Copyright (C) 2010 Texas Instruments, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/pm_runtime.h> -#include <linux/platform_device.h> -#include <linux/mutex.h> - -#include <plat/omap_device.h> -#include <plat/omap-pm.h> - -#ifdef CONFIG_PM_RUNTIME -static int omap_pm_runtime_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - int r, ret = 0; - - dev_dbg(dev, "%s\n", __func__); - - ret = pm_generic_runtime_suspend(dev); - - if (!ret && dev->parent == &omap_device_parent) { - r = omap_device_idle(pdev); - WARN_ON(r); - } - - return ret; -}; - -static int omap_pm_runtime_resume(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - int r; - - dev_dbg(dev, "%s\n", __func__); - - if (dev->parent == &omap_device_parent) { - r = omap_device_enable(pdev); - WARN_ON(r); - } - - return pm_generic_runtime_resume(dev); -}; -#else -#define omap_pm_runtime_suspend NULL -#define omap_pm_runtime_resume NULL -#endif /* CONFIG_PM_RUNTIME */ - -static int __init omap_pm_runtime_init(void) -{ - const struct dev_pm_ops *pm; - struct dev_pm_ops *omap_pm; - - pm = platform_bus_get_pm_ops(); - if (!pm) { - pr_err("%s: unable to get dev_pm_ops from platform_bus\n", - __func__); - return -ENODEV; - } - - omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL); - if (!omap_pm) { - pr_err("%s: unable to alloc memory for new dev_pm_ops\n", - __func__); - return -ENOMEM; - } - - omap_pm->runtime_suspend = omap_pm_runtime_suspend; - omap_pm->runtime_resume = omap_pm_runtime_resume; - - platform_bus_set_pm_ops(omap_pm); - - return 0; -} -core_initcall(omap_pm_runtime_init); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 49c6513e90d..9af08473bf1 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -196,7 +196,7 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused) /** * pwrdm_init - set up the powerdomain layer * @pwrdm_list: array of struct powerdomain pointers to register - * @custom_funcs: func pointers for arch specfic implementations + * @custom_funcs: func pointers for arch specific implementations * * Loop through the array of powerdomains @pwrdm_list, registering all * that are available on the current CPU. If pwrdm_list is supplied diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 027f40bd235..d23d979b9c3 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -121,7 +121,7 @@ struct powerdomain { }; /** - * struct pwrdm_ops - Arch specfic function implementations + * struct pwrdm_ops - Arch specific function implementations * @pwrdm_set_next_pwrst: Set the target power state for a pd * @pwrdm_read_next_pwrst: Read the target power state set for a pd * @pwrdm_read_pwrst: Read the current power state of a pd diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index 9c9c113788b..469a920a74d 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -72,7 +72,7 @@ static struct powerdomain mpu_3xxx_pwrdm = { /* * The USBTLL Save-and-Restore mechanism is broken on - * 3430s upto ES3.0 and 3630ES1.0. Hence this feature + * 3430s up to ES3.0 and 3630ES1.0. Hence this feature * needs to be disabled on these chips. * Refer: 3430 errata ID i459 and 3630 errata ID i579 * diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 8f674c9442b..13e24f913dd 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr) * driver register and sr device intializtion API's. Only one call * will ultimately succeed. * - * Currenly this function registers interrrupt handler for a particular SR + * Currently this function registers interrrupt handler for a particular SR * if smartreflex class driver is already registered and has * requested for interrupts and the SR interrupt line in present. */ diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index c6facf7becf..0c1552d9d99 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -114,7 +114,6 @@ static int __init _config_common_vdd_data(struct omap_vdd_info *vdd) sys_clk_speed /= 1000; /* Generic voltage parameters */ - vdd->curr_volt = 1200000; vdd->volt_scale = vp_forceupdate_scale_voltage; vdd->vp_enabled = false; @@ -851,7 +850,7 @@ int omap_voltage_scale_vdd(struct voltagedomain *voltdm, * @voltdm: pointer to the VDD whose voltage is to be reset. * * This API finds out the correct voltage the voltage domain is supposed - * to be at and resets the voltage to that level. Should be used expecially + * to be at and resets the voltage to that level. Should be used especially * while disabling any voltage compensation modules. */ void omap_voltage_reset(struct voltagedomain *voltdm) @@ -912,7 +911,7 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm, * This API searches only through the non-compensated voltages int the * voltage table. * Returns pointer to the voltage table entry corresponding to volt on - * sucess. Returns -ENODATA if no voltage table exisits for the passed voltage + * success. Returns -ENODATA if no voltage table exisits for the passed voltage * domain or if there is no matching entry. */ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, |