summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2')
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c27
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c2
-rw-r--r--arch/arm/mach-omap2/board-rm680.c3
-rw-r--r--arch/arm/mach-omap2/mux.c1
-rw-r--r--arch/arm/mach-omap2/pm34xx.c7
-rw-r--r--arch/arm/mach-omap2/smartreflex.c11
-rw-r--r--arch/arm/mach-omap2/voltage.c1
7 files changed, 27 insertions, 25 deletions
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index e906e05bb41..9a2a31e011c 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -115,9 +115,6 @@ static struct omap2_hsmmc_info mmc[] = {
static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
{
- twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
- twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
-
if (gpio_is_valid(dssdev->reset_gpio))
gpio_set_value_cansleep(dssdev->reset_gpio, 1);
return 0;
@@ -247,6 +244,8 @@ static struct gpio_led gpio_leds[];
static int devkit8000_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
+ int ret;
+
omap_mux_init_gpio(29, OMAP_PIN_INPUT);
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
@@ -255,17 +254,23 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
- /* gpio + 1 is "LCD_PWREN" (out, active high) */
- devkit8000_lcd_device.reset_gpio = gpio + 1;
- gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN");
- /* Disable until needed */
- gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0);
+ /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
+ devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
+ ret = gpio_request_one(devkit8000_lcd_device.reset_gpio,
+ GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN");
+ if (ret < 0) {
+ devkit8000_lcd_device.reset_gpio = -EINVAL;
+ printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n");
+ }
/* gpio + 7 is "DVI_PD" (out, active low) */
devkit8000_dvi_device.reset_gpio = gpio + 7;
- gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown");
- /* Disable until needed */
- gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0);
+ ret = gpio_request_one(devkit8000_dvi_device.reset_gpio,
+ GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown");
+ if (ret < 0) {
+ devkit8000_dvi_device.reset_gpio = -EINVAL;
+ printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n");
+ }
return 0;
}
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index e001a048dc0..e944025d5ef 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -409,8 +409,6 @@ static void __init omap4_panda_init(void)
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
omap_serial_init();
omap4_twl6030_hsmmc_init(mmc);
- /* OMAP4 Panda uses internal transceiver so register nop transceiver */
- usb_nop_xceiv_register();
omap4_ehci_init();
usb_musb_init(&musb_board_data);
}
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index cb77be7ac44..39a71bb8a30 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -40,9 +40,6 @@ static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
static struct regulator_init_data rm680_vemmc = {
.constraints = {
.name = "rm680_vemmc",
- .min_uV = 2900000,
- .max_uV = 2900000,
- .apply_uV = 1,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_STATUS
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index fae49d12bc7..98148b6c36e 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -1000,6 +1000,7 @@ int __init omap_mux_init(const char *name, u32 flags,
if (!partition->base) {
pr_err("%s: Could not ioremap mux partition at 0x%08x\n",
__func__, partition->phys);
+ kfree(partition);
return -ENODEV;
}
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index a4aa1920a75..2f864e4b085 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -168,9 +168,10 @@ static void omap3_core_restore_context(void)
* once during boot sequence, but this works as we are not using secure
* services.
*/
-static void omap3_save_secure_ram_context(u32 target_mpu_state)
+static void omap3_save_secure_ram_context(void)
{
u32 ret;
+ int mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
/*
@@ -181,7 +182,7 @@ static void omap3_save_secure_ram_context(u32 target_mpu_state)
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
ret = _omap_save_secure_sram((u32 *)
__pa(omap3_secure_ram_storage));
- pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state);
+ pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
/* Following is for error tracking, it should not happen */
if (ret) {
printk(KERN_ERR "save_secure_sram() returns %08x\n",
@@ -1094,7 +1095,7 @@ static int __init omap3_pm_init(void)
local_fiq_disable();
omap_dma_global_context_save();
- omap3_save_secure_ram_context(PWRDM_POWER_ON);
+ omap3_save_secure_ram_context();
omap_dma_global_context_restore();
local_irq_enable();
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 77ecebf3fae..c37e823266d 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -780,8 +780,7 @@ static int omap_sr_autocomp_show(void *data, u64 *val)
struct omap_sr *sr_info = (struct omap_sr *) data;
if (!sr_info) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, sr_info->voltdm->name);
+ pr_warning("%s: omap_sr struct not found\n", __func__);
return -EINVAL;
}
@@ -795,8 +794,7 @@ static int omap_sr_autocomp_store(void *data, u64 val)
struct omap_sr *sr_info = (struct omap_sr *) data;
if (!sr_info) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, sr_info->voltdm->name);
+ pr_warning("%s: omap_sr struct not found\n", __func__);
return -EINVAL;
}
@@ -834,7 +832,8 @@ static int __init omap_sr_probe(struct platform_device *pdev)
if (!pdata) {
dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_free_devinfo;
}
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -966,7 +965,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev)
}
sr_info = _sr_lookup(pdata->voltdm);
- if (!sr_info) {
+ if (IS_ERR(sr_info)) {
dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
__func__);
return -EINVAL;
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index ed6079c94c5..12be525b8df 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -471,6 +471,7 @@ static void __init vdd_debugfs_init(struct omap_vdd_info *vdd)
strcat(name, vdd->voltdm.name);
vdd->debug_dir = debugfs_create_dir(name, voltage_dir);
+ kfree(name);
if (IS_ERR(vdd->debug_dir)) {
pr_warning("%s: Unable to create debugfs directory for"
" vdd_%s\n", __func__, vdd->voltdm.name);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-19 06:10:44 +0000