summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2')
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c27
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c2
-rw-r--r--arch/arm/mach-omap2/board-rm680.c3
-rw-r--r--arch/arm/mach-omap2/clkt_dpll.c2
-rw-r--r--arch/arm/mach-omap2/dma.c2
-rw-r--r--arch/arm/mach-omap2/include/mach/entry-macro.S14
-rw-r--r--arch/arm/mach-omap2/io.c6
-rw-r--r--arch/arm/mach-omap2/mailbox.c12
-rw-r--r--arch/arm/mach-omap2/mux.c5
-rw-r--r--arch/arm/mach-omap2/pm-debug.c8
-rw-r--r--arch/arm/mach-omap2/pm.h2
-rw-r--r--arch/arm/mach-omap2/pm34xx.c7
-rw-r--r--arch/arm/mach-omap2/prcm_mpu44xx.h4
-rw-r--r--arch/arm/mach-omap2/sleep24xx.S2
-rw-r--r--arch/arm/mach-omap2/sleep34xx.S2
-rw-r--r--arch/arm/mach-omap2/smartreflex.c48
-rw-r--r--arch/arm/mach-omap2/sram242x.S3
-rw-r--r--arch/arm/mach-omap2/sram243x.S3
-rw-r--r--arch/arm/mach-omap2/sram34xx.S1
-rw-r--r--arch/arm/mach-omap2/timer-gp.c13
-rw-r--r--arch/arm/mach-omap2/voltage.c1
21 files changed, 88 insertions, 79 deletions
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index e906e05bb41..9a2a31e011c 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -115,9 +115,6 @@ static struct omap2_hsmmc_info mmc[] = {
static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
{
- twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
- twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
-
if (gpio_is_valid(dssdev->reset_gpio))
gpio_set_value_cansleep(dssdev->reset_gpio, 1);
return 0;
@@ -247,6 +244,8 @@ static struct gpio_led gpio_leds[];
static int devkit8000_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
+ int ret;
+
omap_mux_init_gpio(29, OMAP_PIN_INPUT);
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
@@ -255,17 +254,23 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
- /* gpio + 1 is "LCD_PWREN" (out, active high) */
- devkit8000_lcd_device.reset_gpio = gpio + 1;
- gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN");
- /* Disable until needed */
- gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0);
+ /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
+ devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
+ ret = gpio_request_one(devkit8000_lcd_device.reset_gpio,
+ GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN");
+ if (ret < 0) {
+ devkit8000_lcd_device.reset_gpio = -EINVAL;
+ printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n");
+ }
/* gpio + 7 is "DVI_PD" (out, active low) */
devkit8000_dvi_device.reset_gpio = gpio + 7;
- gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown");
- /* Disable until needed */
- gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0);
+ ret = gpio_request_one(devkit8000_dvi_device.reset_gpio,
+ GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown");
+ if (ret < 0) {
+ devkit8000_dvi_device.reset_gpio = -EINVAL;
+ printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n");
+ }
return 0;
}
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index e001a048dc0..e944025d5ef 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -409,8 +409,6 @@ static void __init omap4_panda_init(void)
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
omap_serial_init();
omap4_twl6030_hsmmc_init(mmc);
- /* OMAP4 Panda uses internal transceiver so register nop transceiver */
- usb_nop_xceiv_register();
omap4_ehci_init();
usb_musb_init(&musb_board_data);
}
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index cb77be7ac44..39a71bb8a30 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -40,9 +40,6 @@ static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
static struct regulator_init_data rm680_vemmc = {
.constraints = {
.name = "rm680_vemmc",
- .min_uV = 2900000,
- .max_uV = 2900000,
- .apply_uV = 1,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_STATUS
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 337392c3f54..acb7ae5b0a2 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -77,7 +77,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n)
dd = clk->dpll_data;
/* DPLL divider must result in a valid jitter correction val */
- fint = clk->parent->rate / (n + 1);
+ fint = clk->parent->rate / n;
if (fint < DPLL_FINT_BAND1_MIN) {
pr_debug("rejecting n=%d due to Fint failure, "
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index d2f15f5cfd3..34922b2d2e3 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -264,7 +264,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
if (IS_ERR(od)) {
pr_err("%s: Cant build omap_device for %s:%s.\n",
__func__, name, oh->name);
- return IS_ERR(od);
+ return PTR_ERR(od);
}
mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0);
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index befa321c4c1..81985a665cb 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -38,20 +38,6 @@
*/
#ifdef MULTI_OMAP2
-
-/*
- * We use __glue to avoid errors with multiple definitions of
- * .globl omap_irq_base as it's included from entry-armv.S but not
- * from entry-common.S.
- */
-#ifdef __glue
- .pushsection .data
- .globl omap_irq_base
-omap_irq_base:
- .word 0
- .popsection
-#endif
-
/*
* Configure the interrupt base on the first interrupt.
* See also omap_irq_base_init for setting omap_irq_base.
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index e66687b0b9d..c2032041d26 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -314,14 +314,13 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
}
+void __iomem *omap_irq_base;
+
/*
* Initialize asm_irq_base for entry-macro.S
*/
static inline void omap_irq_base_init(void)
{
- extern void __iomem *omap_irq_base;
-
-#ifdef MULTI_OMAP2
if (cpu_is_omap24xx())
omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE);
else if (cpu_is_omap34xx())
@@ -330,7 +329,6 @@ static inline void omap_irq_base_init(void)
omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE);
else
pr_err("Could not initialize omap_irq_base\n");
-#endif
}
void __init omap2_init_common_infrastructure(void)
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 394413dc7de..24b88504df0 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -193,10 +193,12 @@ static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = mbox->priv;
- u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
- l = mbox_read_reg(p->irqdisable);
- l &= ~bit;
- mbox_write_reg(l, p->irqdisable);
+ u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
+
+ if (!cpu_is_omap44xx())
+ bit = mbox_read_reg(p->irqdisable) & ~bit;
+
+ mbox_write_reg(bit, p->irqdisable);
}
static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
@@ -334,7 +336,7 @@ static struct omap_mbox mbox_iva_info = {
.priv = &omap2_mbox_iva_priv,
};
-struct omap_mbox *omap2_mboxes[] = { &mbox_iva_info, &mbox_dsp_info, NULL };
+struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL };
#endif
#if defined(CONFIG_ARCH_OMAP4)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index df8d2f2872c..6c84659cf84 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -160,7 +160,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
struct omap_mux *mux = NULL;
struct omap_mux_entry *e;
const char *mode_name;
- int found = 0, found_mode, mode0_len = 0;
+ int found = 0, found_mode = 0, mode0_len = 0;
struct list_head *muxmodes = &partition->muxmodes;
mode_name = strchr(muxname, '.');
@@ -605,7 +605,7 @@ static void __init omap_mux_dbg_create_entry(
list_for_each_entry(e, &partition->muxmodes, node) {
struct omap_mux *m = &e->mux;
- (void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir,
+ (void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir,
m, &omap_mux_dbg_signal_fops);
}
}
@@ -1000,6 +1000,7 @@ int __init omap_mux_init(const char *name, u32 flags,
if (!partition->base) {
pr_err("%s: Could not ioremap mux partition at 0x%08x\n",
__func__, partition->phys);
+ kfree(partition);
return -ENODEV;
}
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 125f56591fb..a5a83b358dd 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -637,14 +637,14 @@ static int __init pm_dbg_init(void)
}
- (void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUGO, d,
+ (void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUSR, d,
&enable_off_mode, &pm_dbg_option_fops);
- (void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUGO, d,
+ (void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUSR, d,
&sleep_while_idle, &pm_dbg_option_fops);
- (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUGO, d,
+ (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUSR, d,
&wakeup_timer_seconds, &pm_dbg_option_fops);
(void) debugfs_create_file("wakeup_timer_milliseconds",
- S_IRUGO | S_IWUGO, d, &wakeup_timer_milliseconds,
+ S_IRUGO | S_IWUSR, d, &wakeup_timer_milliseconds,
&pm_dbg_option_fops);
pm_dbg_init_done = 1;
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 1c1b0ab5b97..39580e6060e 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -92,7 +92,7 @@ extern void omap24xx_idle_loop_suspend(void);
extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power);
extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
-extern void save_secure_ram_context(u32 *addr);
+extern int save_secure_ram_context(u32 *addr);
extern void omap3_save_scratchpad_contents(void);
extern unsigned int omap24xx_idle_loop_suspend_sz;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index a4aa1920a75..2f864e4b085 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -168,9 +168,10 @@ static void omap3_core_restore_context(void)
* once during boot sequence, but this works as we are not using secure
* services.
*/
-static void omap3_save_secure_ram_context(u32 target_mpu_state)
+static void omap3_save_secure_ram_context(void)
{
u32 ret;
+ int mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
/*
@@ -181,7 +182,7 @@ static void omap3_save_secure_ram_context(u32 target_mpu_state)
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
ret = _omap_save_secure_sram((u32 *)
__pa(omap3_secure_ram_storage));
- pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state);
+ pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
/* Following is for error tracking, it should not happen */
if (ret) {
printk(KERN_ERR "save_secure_sram() returns %08x\n",
@@ -1094,7 +1095,7 @@ static int __init omap3_pm_init(void)
local_fiq_disable();
omap_dma_global_context_save();
- omap3_save_secure_ram_context(PWRDM_POWER_ON);
+ omap3_save_secure_ram_context();
omap_dma_global_context_restore();
local_irq_enable();
diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.h b/arch/arm/mach-omap2/prcm_mpu44xx.h
index 729a644ce85..3300ff6e3cf 100644
--- a/arch/arm/mach-omap2/prcm_mpu44xx.h
+++ b/arch/arm/mach-omap2/prcm_mpu44xx.h
@@ -38,8 +38,8 @@
#define OMAP4430_PRCM_MPU_CPU1_INST 0x0800
/* PRCM_MPU clockdomain register offsets (from instance start) */
-#define OMAP4430_PRCM_MPU_CPU0_MPU_CDOFFS 0x0000
-#define OMAP4430_PRCM_MPU_CPU1_MPU_CDOFFS 0x0000
+#define OMAP4430_PRCM_MPU_CPU0_MPU_CDOFFS 0x0018
+#define OMAP4430_PRCM_MPU_CPU1_MPU_CDOFFS 0x0018
/*
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index c7780cc8d91..b5071a47ec3 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -47,6 +47,7 @@
* Note: This code get's copied to internal SRAM at boot. When the OMAP
* wakes up it continues execution at the point it went to sleep.
*/
+ .align 3
ENTRY(omap24xx_idle_loop_suspend)
stmfd sp!, {r0, lr} @ save registers on stack
mov r0, #0 @ clear for mcr setup
@@ -82,6 +83,7 @@ ENTRY(omap24xx_idle_loop_suspend_sz)
* The DLL load value is not kept in RETENTION or OFF. It needs to be restored
* at wake
*/
+ .align 3
ENTRY(omap24xx_cpu_suspend)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
mov r3, #0x0 @ clear for mcr call
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 98d8232808b..951a0be66cf 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -118,6 +118,7 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
.text
/* Function to call rom code to save secure ram context */
+ .align 3
ENTRY(save_secure_ram_context)
stmfd sp!, {r1-r12, lr} @ save registers on stack
adr r3, api_params @ r3 points to parameters
@@ -169,6 +170,7 @@ ENTRY(save_secure_ram_context_sz)
* depending on the low power mode (non-OFF vs OFF modes),
* cf. 'Resume path for xxx mode' comments.
*/
+ .align 3
ENTRY(omap34xx_cpu_suspend)
stmfd sp!, {r0-r12, lr} @ save registers on stack
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 77ecebf3fae..1a777e34d0c 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -282,6 +282,7 @@ error:
dev_err(&sr_info->pdev->dev, "%s: ERROR in registering"
"interrupt handler. Smartreflex will"
"not function as desired\n", __func__);
+ kfree(name);
kfree(sr_info);
return ret;
}
@@ -780,8 +781,7 @@ static int omap_sr_autocomp_show(void *data, u64 *val)
struct omap_sr *sr_info = (struct omap_sr *) data;
if (!sr_info) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, sr_info->voltdm->name);
+ pr_warning("%s: omap_sr struct not found\n", __func__);
return -EINVAL;
}
@@ -795,8 +795,7 @@ static int omap_sr_autocomp_store(void *data, u64 val)
struct omap_sr *sr_info = (struct omap_sr *) data;
if (!sr_info) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, sr_info->voltdm->name);
+ pr_warning("%s: omap_sr struct not found\n", __func__);
return -EINVAL;
}
@@ -834,7 +833,8 @@ static int __init omap_sr_probe(struct platform_device *pdev)
if (!pdata) {
dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_free_devinfo;
}
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -880,7 +880,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
ret = sr_late_init(sr_info);
if (ret) {
pr_warning("%s: Error in SR late init\n", __func__);
- return ret;
+ goto err_release_region;
}
}
@@ -891,17 +891,20 @@ static int __init omap_sr_probe(struct platform_device *pdev)
* not try to create rest of the debugfs entries.
*/
vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm);
- if (!vdd_dbg_dir)
- return -EINVAL;
+ if (!vdd_dbg_dir) {
+ ret = -EINVAL;
+ goto err_release_region;
+ }
dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir);
if (IS_ERR(dbg_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
__func__);
- return PTR_ERR(dbg_dir);
+ ret = PTR_ERR(dbg_dir);
+ goto err_release_region;
}
- (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUGO, dbg_dir,
+ (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, dbg_dir,
(void *)sr_info, &pm_sr_fops);
(void) debugfs_create_x32("errweight", S_IRUGO, dbg_dir,
&sr_info->err_weight);
@@ -914,7 +917,8 @@ static int __init omap_sr_probe(struct platform_device *pdev)
if (IS_ERR(nvalue_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory"
"for n-values\n", __func__);
- return PTR_ERR(nvalue_dir);
+ ret = PTR_ERR(nvalue_dir);
+ goto err_release_region;
}
omap_voltage_get_volttable(sr_info->voltdm, &volt_data);
@@ -923,24 +927,16 @@ static int __init omap_sr_probe(struct platform_device *pdev)
" corresponding vdd vdd_%s. Cannot create debugfs"
"entries for n-values\n",
__func__, sr_info->voltdm->name);
- return -ENODATA;
+ ret = -ENODATA;
+ goto err_release_region;
}
for (i = 0; i < sr_info->nvalue_count; i++) {
- char *name;
- char volt_name[32];
-
- name = kzalloc(NVALUE_NAME_LEN + 1, GFP_KERNEL);
- if (!name) {
- dev_err(&pdev->dev, "%s: Unable to allocate memory"
- " for n-value directory name\n", __func__);
- return -ENOMEM;
- }
+ char name[NVALUE_NAME_LEN + 1];
- strcpy(name, "volt_");
- sprintf(volt_name, "%d", volt_data[i].volt_nominal);
- strcat(name, volt_name);
- (void) debugfs_create_x32(name, S_IRUGO | S_IWUGO, nvalue_dir,
+ snprintf(name, sizeof(name), "volt_%d",
+ volt_data[i].volt_nominal);
+ (void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
&(sr_info->nvalue_table[i].nvalue));
}
@@ -966,7 +962,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev)
}
sr_info = _sr_lookup(pdata->voltdm);
- if (!sr_info) {
+ if (IS_ERR(sr_info)) {
dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
__func__);
return -EINVAL;
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 055310cc77d..ff9b9dbcb30 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -39,6 +39,7 @@
.text
+ .align 3
ENTRY(omap242x_sram_ddr_init)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
@@ -143,6 +144,7 @@ ENTRY(omap242x_sram_ddr_init_sz)
* r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
* PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
*/
+ .align 3
ENTRY(omap242x_sram_reprogram_sdrc)
stmfd sp!, {r0 - r10, lr} @ save registers on stack
mov r3, #0x0 @ clear for mrc call
@@ -238,6 +240,7 @@ ENTRY(omap242x_sram_reprogram_sdrc_sz)
/*
* Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
*/
+ .align 3
ENTRY(omap242x_sram_set_prcm)
stmfd sp!, {r0-r12, lr} @ regs to stack
adr r4, pbegin @ addr of preload start
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index f9007580aea..76730209fa0 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -39,6 +39,7 @@
.text
+ .align 3
ENTRY(omap243x_sram_ddr_init)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
@@ -143,6 +144,7 @@ ENTRY(omap243x_sram_ddr_init_sz)
* r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
* PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
*/
+ .align 3
ENTRY(omap243x_sram_reprogram_sdrc)
stmfd sp!, {r0 - r10, lr} @ save registers on stack
mov r3, #0x0 @ clear for mrc call
@@ -238,6 +240,7 @@ ENTRY(omap243x_sram_reprogram_sdrc_sz)
/*
* Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
*/
+ .align 3
ENTRY(omap243x_sram_set_prcm)
stmfd sp!, {r0-r12, lr} @ regs to stack
adr r4, pbegin @ addr of preload start
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 7f893a29d50..25011ca2145 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -111,6 +111,7 @@
* since it will cause the ARM MMU to attempt to walk the page tables.
* These crashes may be intermittent.
*/
+ .align 3
ENTRY(omap3_sram_configure_core_dpll)
stmfd sp!, {r1-r12, lr} @ store regs to stack
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 7b7c2683ae7..0fc550e7e48 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -39,6 +39,7 @@
#include <asm/mach/time.h>
#include <plat/dmtimer.h>
#include <asm/localtimer.h>
+#include <asm/sched_clock.h>
#include "timer-gp.h"
@@ -190,6 +191,7 @@ static void __init omap2_gp_clocksource_init(void)
/*
* clocksource
*/
+static DEFINE_CLOCK_DATA(cd);
static struct omap_dm_timer *gpt_clocksource;
static cycle_t clocksource_read_cycles(struct clocksource *cs)
{
@@ -204,6 +206,15 @@ static struct clocksource clocksource_gpt = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+static void notrace dmtimer_update_sched_clock(void)
+{
+ u32 cyc;
+
+ cyc = omap_dm_timer_read_counter(gpt_clocksource);
+
+ update_sched_clock(&cd, cyc, (u32)~0);
+}
+
/* Setup free-running counter for clocksource */
static void __init omap2_gp_clocksource_init(void)
{
@@ -224,6 +235,8 @@ static void __init omap2_gp_clocksource_init(void)
omap_dm_timer_set_load_start(gpt, 1, 0);
+ init_sched_clock(&cd, dmtimer_update_sched_clock, 32, tick_rate);
+
if (clocksource_register_hz(&clocksource_gpt, tick_rate))
printk(err2, clocksource_gpt.name);
}
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index ed6079c94c5..12be525b8df 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -471,6 +471,7 @@ static void __init vdd_debugfs_init(struct omap_vdd_info *vdd)
strcat(name, vdd->voltdm.name);
vdd->debug_dir = debugfs_create_dir(name, voltage_dir);
+ kfree(name);
if (IS_ERR(vdd->debug_dir)) {
pr_warning("%s: Unable to create debugfs directory for"
" vdd_%s\n", __func__, vdd->voltdm.name);