diff options
Diffstat (limited to 'arch/arm/mach-omap2')
103 files changed, 6362 insertions, 3012 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4cf5142f22c..dd0fbf76ac7 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -9,7 +9,7 @@ config ARCH_OMAP2PLUS_TYPICAL select REGULATOR select PM_RUNTIME select VFP - select NEON if ARCH_OMAP3 || ARCH_OMAP4 + select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 select SERIAL_OMAP select SERIAL_OMAP_CONSOLE select I2C @@ -21,12 +21,16 @@ config ARCH_OMAP2PLUS_TYPICAL help Compile a kernel suitable for booting most boards +config SOC_HAS_OMAP2_SDRC + bool "OMAP2 SDRAM Controller support" + config ARCH_OMAP2 bool "TI OMAP2" depends on ARCH_OMAP2PLUS default y select CPU_V6 select MULTI_IRQ_HANDLER + select SOC_HAS_OMAP2_SDRC config ARCH_OMAP3 bool "TI OMAP3" @@ -35,9 +39,11 @@ config ARCH_OMAP3 select CPU_V7 select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARCH_HAS_OPP + select PM_RUNTIME if CPU_IDLE select PM_OPP if PM select ARM_CPU_SUSPEND if PM select MULTI_IRQ_HANDLER + select SOC_HAS_OMAP2_SDRC config ARCH_OMAP4 bool "TI OMAP4" @@ -52,10 +58,17 @@ config ARCH_OMAP4 select PL310_ERRATA_727915 select ARM_ERRATA_720789 select ARCH_HAS_OPP + select PM_RUNTIME if CPU_IDLE select PM_OPP if PM select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_CPU_SUSPEND if PM +config SOC_OMAP5 + bool "TI OMAP5" + select CPU_V7 + select ARM_GIC + select HAVE_SMP + comment "OMAP Core Type" depends on ARCH_OMAP2 @@ -64,19 +77,19 @@ config SOC_OMAP2420 depends on ARCH_OMAP2 default y select OMAP_DM_TIMER - select ARCH_OMAP_OTG + select SOC_HAS_OMAP2_SDRC config SOC_OMAP2430 bool "OMAP2430 support" depends on ARCH_OMAP2 default y - select ARCH_OMAP_OTG + select SOC_HAS_OMAP2_SDRC config SOC_OMAP3430 bool "OMAP3430 support" depends on ARCH_OMAP3 default y - select ARCH_OMAP_OTG + select SOC_HAS_OMAP2_SDRC config SOC_TI81XX bool "TI81XX support" @@ -85,8 +98,10 @@ config SOC_TI81XX config SOC_AM33XX bool "AM33XX support" - depends on ARCH_OMAP3 default y + select CPU_V7 + select ARM_CPU_SUSPEND if PM + select MULTI_IRQ_HANDLER config OMAP_PACKAGE_ZAF bool diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fa742f3c262..f6a24b3f9c4 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -6,7 +6,7 @@ obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o -omap-2-3-common = irq.o sdrc.o +omap-2-3-common = irq.o hwmod-common = omap_hwmod.o \ omap_hwmod_common_data.o clock-common = clock.o clock_common_data.o \ @@ -16,19 +16,24 @@ secure-common = omap-smc.o omap-secure.o obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common) +obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common) ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) obj-y += mcbsp.o endif obj-$(CONFIG_TWL4030_CORE) += omap_twl.o +obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o # SMP support ONLY available for OMAP4 obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o -obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o -obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o +omap-4-5-common = omap4-common.o omap-wakeupgen.o \ + sleep44xx.o +obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) +obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec) @@ -66,12 +71,12 @@ ifeq ($(CONFIG_PM),y) obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o -obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o -obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o +obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o -obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o -obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o + +obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o +obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o AFLAGS_sleep24xx.o :=-Wa,-march=armv6 AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec) @@ -82,14 +87,22 @@ endif endif +ifeq ($(CONFIG_CPU_IDLE),y) +obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o +obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o +endif + # PRCM +omap-prcm-4-5-common = prcm.o cminst44xx.o cm44xx.o \ + prcm_mpu44xx.o prminst44xx.o \ + vc44xx_data.o vp44xx_data.o obj-y += prm_common.o obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o -obj-$(CONFIG_ARCH_OMAP4) += prcm.o cminst44xx.o cm44xx.o -obj-$(CONFIG_ARCH_OMAP4) += prcm_mpu44xx.o prminst44xx.o -obj-$(CONFIG_ARCH_OMAP4) += vc44xx_data.o vp44xx_data.o prm44xx.o +obj-$(CONFIG_SOC_AM33XX) += prcm.o prm33xx.o cm33xx.o +obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) prm44xx.o +obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common) # OMAP voltage domains voltagedomain-common := voltage.o vc.o vp.o @@ -99,6 +112,9 @@ obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o +obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common) +obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o +obj-$(CONFIG_SOC_OMAP5) += $(voltagedomain-common) # OMAP powerdomain framework powerdomain-common += powerdomain.o powerdomain-common.o @@ -113,10 +129,14 @@ obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o +obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common) +obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o +obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o +obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common) +obj-$(CONFIG_SOC_OMAP5) += powerdomain44xx.o # PRCM clockdomain control clockdomain-common += clockdomain.o -clockdomain-common += clockdomains_common_data.o obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP2) += clockdomain2xxx_3xxx.o obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o @@ -129,6 +149,11 @@ obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o +obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common) +obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o +obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o +obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common) +obj-$(CONFIG_SOC_OMAP5) += clockdomain44xx.o # Clock framework obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o @@ -146,6 +171,10 @@ obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o clock3xxx_data.o obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o +obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o +obj-$(CONFIG_SOC_AM33XX) += clock33xx_data.o +obj-$(CONFIG_SOC_OMAP5) += $(clock-common) +obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o # OMAP2 clock rate set data (old "OPP" data) obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o @@ -173,6 +202,7 @@ obj-$(CONFIG_OMAP3_EMU) += emu.o # L3 interconnect obj-$(CONFIG_ARCH_OMAP3) += omap_l3_smx.o obj-$(CONFIG_ARCH_OMAP4) += omap_l3_noc.o +obj-$(CONFIG_SOC_OMAP5) += omap_l3_noc.o obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o mailbox_mach-objs := mailbox.o @@ -189,6 +219,10 @@ endif # OMAP2420 MSDI controller integration support ("MMC") obj-$(CONFIG_SOC_OMAP2420) += msdi.o +ifneq ($(CONFIG_DRM_OMAP),) +obj-y += drm.o +endif + # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o @@ -244,9 +278,6 @@ obj-y += $(omap-flash-y) $(omap-flash-m) omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y) - -usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o -obj-y += $(usbfs-m) $(usbfs-y) obj-y += usb-musb.o obj-y += omap_phy_internal.o diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c index 447682c4e11..2c90ac68668 100644 --- a/arch/arm/mach-omap2/am35xx-emac.c +++ b/arch/arm/mach-omap2/am35xx-emac.c @@ -15,27 +15,13 @@ * General Public License for more details. */ -#include <linux/clk.h> +#include <linux/err.h> #include <linux/davinci_emac.h> -#include <linux/platform_device.h> -#include <plat/irqs.h> +#include <asm/system.h> +#include <plat/omap_device.h> #include <mach/am35xx.h> - #include "control.h" - -static struct mdio_platform_data am35xx_emac_mdio_pdata; - -static struct resource am35xx_emac_mdio_resources[] = { - DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET, SZ_4K), -}; - -static struct platform_device am35xx_emac_mdio_device = { - .name = "davinci_mdio", - .id = 0, - .num_resources = ARRAY_SIZE(am35xx_emac_mdio_resources), - .resource = am35xx_emac_mdio_resources, - .dev.platform_data = &am35xx_emac_mdio_pdata, -}; +#include "am35xx-emac.h" static void am35xx_enable_emac_int(void) { @@ -69,41 +55,57 @@ static struct emac_platform_data am35xx_emac_pdata = { .interrupt_disable = am35xx_disable_emac_int, }; -static struct resource am35xx_emac_resources[] = { - DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE, 0x30000), - DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RXTHRESH_IRQ), - DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RX_PULSE_IRQ), - DEFINE_RES_IRQ(INT_35XX_EMAC_C0_TX_PULSE_IRQ), - DEFINE_RES_IRQ(INT_35XX_EMAC_C0_MISC_PULSE_IRQ), -}; +static struct mdio_platform_data am35xx_mdio_pdata; -static struct platform_device am35xx_emac_device = { - .name = "davinci_emac", - .id = -1, - .num_resources = ARRAY_SIZE(am35xx_emac_resources), - .resource = am35xx_emac_resources, - .dev = { - .platform_data = &am35xx_emac_pdata, - }, -}; +static int __init omap_davinci_emac_dev_init(struct omap_hwmod *oh, + void *pdata, int pdata_len) +{ + struct platform_device *pdev; + + pdev = omap_device_build(oh->class->name, 0, oh, pdata, pdata_len, + NULL, 0, false); + if (IS_ERR(pdev)) { + WARN(1, "Can't build omap_device for %s:%s.\n", + oh->class->name, oh->name); + return PTR_ERR(pdev); + } + + return 0; +} void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) { + struct omap_hwmod *oh; u32 v; - int err; + int ret; - am35xx_emac_pdata.rmii_en = rmii_en; - am35xx_emac_mdio_pdata.bus_freq = mdio_bus_freq; - err = platform_device_register(&am35xx_emac_device); - if (err) { - pr_err("AM35x: failed registering EMAC device: %d\n", err); + oh = omap_hwmod_lookup("davinci_mdio"); + if (!oh) { + pr_err("Could not find davinci_mdio hwmod\n"); + return; + } + + am35xx_mdio_pdata.bus_freq = mdio_bus_freq; + + ret = omap_davinci_emac_dev_init(oh, &am35xx_mdio_pdata, + sizeof(am35xx_mdio_pdata)); + if (ret) { + pr_err("Could not build davinci_mdio hwmod device\n"); return; } - err = platform_device_register(&am35xx_emac_mdio_device); - if (err) { - pr_err("AM35x: failed registering EMAC MDIO device: %d\n", err); - platform_device_unregister(&am35xx_emac_device); + oh = omap_hwmod_lookup("davinci_emac"); + if (!oh) { + pr_err("Could not find davinci_emac hwmod\n"); + return; + } + + am35xx_emac_pdata.rmii_en = rmii_en; + + ret = omap_davinci_emac_dev_init(oh, &am35xx_emac_pdata, + sizeof(am35xx_emac_pdata)); + if (ret) { + pr_err("Could not build davinci_emac hwmod device\n"); return; } diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 99ca6bad5c3..9511584fdc4 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -218,9 +218,6 @@ static struct twl4030_gpio_platform_data sdp2430_gpio_data = { }; static struct twl4030_platform_data sdp2430_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .gpio = &sdp2430_gpio_data, .vmmc1 = &sdp2430_vmmc1, @@ -254,16 +251,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; -static struct omap_usb_config sdp2430_usb_config __initdata = { - .otg = 1, -#ifdef CONFIG_USB_GADGET_OMAP - .hmc_mode = 0x0, -#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - .hmc_mode = 0x1, -#endif - .pins[0] = 3, -}; - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -280,7 +267,6 @@ static void __init omap_2430sdp_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); omap_hsmmc_init(mmc); - omap2_usbfs_init(&sdp2430_usb_config); omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP); usb_musb_init(NULL); diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 8e17284a803..ad8a7d94afc 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -821,6 +821,9 @@ static void __init omap_4430sdp_display_init(void) #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + /* NIRQ2 for twl6040 */ + OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 | + OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), { .reg_offset = OMAP_MUX_TERMINATOR }, }; diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 502c31e123b..e5fa46bfde2 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -35,7 +35,6 @@ #include <asm/mach/flash.h> #include <plat/led.h> -#include <plat/usb.h> #include <plat/board.h> #include "common.h" #include <plat/gpmc.h> @@ -253,13 +252,6 @@ out: clk_put(gpmc_fck); } -static struct omap_usb_config apollon_usb_config __initdata = { - .register_dev = 1, - .hmc_mode = 0x14, /* 0:dev 1:host1 2:disable */ - - .pins[0] = 6, -}; - static struct panel_generic_dpi_data apollon_panel_data = { .name = "apollon", }; @@ -297,15 +289,6 @@ static void __init apollon_led_init(void) gpio_request_array(apollon_gpio_leds, ARRAY_SIZE(apollon_gpio_leds)); } -static void __init apollon_usb_init(void) -{ - /* USB device */ - /* DEVICE_SUSPEND */ - omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0); - gpio_request_one(12, GPIOF_OUT_INIT_LOW, "USB suspend"); - omap2_usbfs_init(&apollon_usb_config); -} - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -321,7 +304,6 @@ static void __init omap_apollon_init(void) apollon_init_smc91x(); apollon_led_init(); apollon_flash_init(); - apollon_usb_init(); /* REVISIT: where's the correct place */ omap_mux_init_signal("sys_nirq", OMAP_PULL_ENA | OMAP_PULL_UP); @@ -329,7 +311,7 @@ static void __init omap_apollon_init(void) /* LCD PWR_EN */ omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP); - /* Use Interal loop-back in MMC/SDIO Module Input Clock selection */ + /* Use Internal loop-back in MMC/SDIO Module Input Clock selection */ v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); v |= (1 << 24); omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index ded100c80a9..97d719047af 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -490,6 +490,71 @@ static struct twl4030_platform_data cm_t35_twldata = { .power = &cm_t35_power_data, }; +#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE) +#include <media/omap3isp.h> +#include "devices.h" + +static struct i2c_board_info cm_t35_isp_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("mt9t001", 0x5d), + }, + { + I2C_BOARD_INFO("tvp5150", 0x5c), + }, +}; + +static struct isp_subdev_i2c_board_info cm_t35_isp_primary_subdevs[] = { + { + .board_info = &cm_t35_isp_i2c_boardinfo[0], + .i2c_adapter_id = 3, + }, + { NULL, 0, }, +}; + +static struct isp_subdev_i2c_board_info cm_t35_isp_secondary_subdevs[] = { + { + .board_info = &cm_t35_isp_i2c_boardinfo[1], + .i2c_adapter_id = 3, + }, + { NULL, 0, }, +}; + +static struct isp_v4l2_subdevs_group cm_t35_isp_subdevs[] = { + { + .subdevs = cm_t35_isp_primary_subdevs, + .interface = ISP_INTERFACE_PARALLEL, + .bus = { + .parallel = { + .clk_pol = 1, + }, + }, + }, + { + .subdevs = cm_t35_isp_secondary_subdevs, + .interface = ISP_INTERFACE_PARALLEL, + .bus = { + .parallel = { + .clk_pol = 0, + }, + }, + }, + { NULL, 0, }, +}; + +static struct isp_platform_data cm_t35_isp_pdata = { + .subdevs = cm_t35_isp_subdevs, +}; + +static void __init cm_t35_init_camera(void) +{ + if (omap3_init_camera(&cm_t35_isp_pdata) < 0) + pr_warn("CM-T3x: Failed registering camera device!\n"); +} + +#else +static inline void cm_t35_init_camera(void) {} +#endif /* CONFIG_VIDEO_OMAP3 */ + static void __init cm_t35_init_i2c(void) { omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB, @@ -497,6 +562,8 @@ static void __init cm_t35_init_i2c(void) TWL_COMMON_PDATA_AUDIO); omap3_pmic_init("tps65930", &cm_t35_twldata); + + omap_register_i2c_bus(3, 400, NULL, 0); } #ifdef CONFIG_OMAP_MUX @@ -574,6 +641,27 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + /* Camera */ + OMAP3_MUX(CAM_HS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_VS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_XCLKA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_FLD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D8, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP3_MUX(CAM_D9, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP3_MUX(CAM_STROBE, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + OMAP3_MUX(CAM_D10, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN), + OMAP3_MUX(CAM_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN), + /* display controls */ OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), @@ -646,6 +734,7 @@ static void __init cm_t3x_common_init(void) usb_musb_init(NULL); cm_t35_init_usbh(); + cm_t35_init_camera(); } static void __init cm_t35_init(void) diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 20293465786..6f93a20536e 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -25,23 +25,12 @@ #include "common-board-devices.h" #if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)) -#define omap_intc_of_init NULL +#define intc_of_init NULL #endif #ifndef CONFIG_ARCH_OMAP4 #define gic_of_init NULL #endif -static struct of_device_id irq_match[] __initdata = { - { .compatible = "ti,omap2-intc", .data = omap_intc_of_init, }, - { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, - { } -}; - -static void __init omap_init_irq(void) -{ - of_irq_init(irq_match); -} - static struct of_device_id omap_dt_match_table[] __initdata = { { .compatible = "simple-bus", }, { .compatible = "ti,omap-infra", }, @@ -65,7 +54,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .reserve = omap_reserve, .map_io = omap242x_map_io, .init_early = omap2420_init_early, - .init_irq = omap_init_irq, + .init_irq = omap_intc_of_init, .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, .timer = &omap2_timer, @@ -84,7 +73,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)") .reserve = omap_reserve, .map_io = omap243x_map_io, .init_early = omap2430_init_early, - .init_irq = omap_init_irq, + .init_irq = omap_intc_of_init, .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, .timer = &omap2_timer, @@ -103,7 +92,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3430_init_early, - .init_irq = omap_init_irq, + .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, .timer = &omap3_timer, @@ -112,6 +101,24 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") MACHINE_END #endif +#ifdef CONFIG_SOC_AM33XX +static const char *am33xx_boards_compat[] __initdata = { + "ti,am33xx", + NULL, +}; + +DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = am33xx_map_io, + .init_early = am33xx_init_early, + .init_irq = omap_intc_of_init, + .handle_irq = omap3_intc_handle_irq, + .init_machine = omap_generic_init, + .timer = &omap3_am33xx_timer, + .dt_compat = am33xx_boards_compat, +MACHINE_END +#endif + #ifdef CONFIG_ARCH_OMAP4 static const char *omap4_boards_compat[] __initdata = { "ti,omap4", @@ -122,7 +129,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .reserve = omap_reserve, .map_io = omap4_map_io, .init_early = omap4430_init_early, - .init_irq = omap_init_irq, + .init_irq = omap_gic_of_init, .handle_irq = gic_handle_irq, .init_machine = omap_generic_init, .init_late = omap4430_init_late, @@ -131,3 +138,22 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .restart = omap_prcm_restart, MACHINE_END #endif + +#ifdef CONFIG_SOC_OMAP5 +static const char *omap5_boards_compat[] __initdata = { + "ti,omap5", + NULL, +}; + +DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap5_map_io, + .init_early = omap5_init_early, + .init_irq = omap_gic_of_init, + .handle_irq = gic_handle_irq, + .init_machine = omap_generic_init, + .timer = &omap5_timer, + .dt_compat = omap5_boards_compat, + .restart = omap_prcm_restart, +MACHINE_END +#endif diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 876becf8205..ace20482e3e 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/usb.h> #include <plat/board.h> #include "common.h" #include <plat/menelaus.h> @@ -329,17 +328,6 @@ static void __init h4_init_flash(void) h4_flash_resource.end = base + SZ_64M - 1; } -static struct omap_usb_config h4_usb_config __initdata = { - /* S1.10 OFF -- usb "download port" - * usb0 switched to Mini-B port and isp1105 transceiver; - * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging - */ - .register_dev = 1, - .pins[0] = 3, -/* .hmc_mode = 0x14,*/ /* 0:dev 1:host 2:disable */ - .hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */ -}; - static struct at24_platform_data m24c01 = { .byte_len = SZ_1K / 8, .page_size = 16, @@ -381,7 +369,6 @@ static void __init omap_h4_init(void) ARRAY_SIZE(h4_i2c_board_info)); platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices)); - omap2_usbfs_init(&h4_usb_config); omap_serial_init(); omap_sdrc_init(NULL, NULL); h4_init_flash(); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 580fd17208d..6202fc76e49 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -433,7 +433,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 639bd07ea38..ef230a0eb5e 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -24,6 +24,10 @@ #include <linux/leds.h> #include <linux/interrupt.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> + #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/i2c/twl.h> @@ -43,6 +47,7 @@ #include <plat/board.h> #include <plat/usb.h> +#include <plat/nand.h> #include "common.h" #include <plat/mcspi.h> #include <video/omapdss.h> @@ -53,7 +58,6 @@ #include "hsmmc.h" #include "common-board-devices.h" -#define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 #define OMAP3_EVM_EHCI_SELECT 61 @@ -355,6 +359,19 @@ static int omap3evm_twl_gpio_setup(struct device *dev, platform_device_register(&leds_gpio); + /* Enable VBUS switch by setting TWL4030.GPIO2DIR as output + * for starting USB tranceiver + */ +#ifdef CONFIG_TWL4030_CORE + if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) { + u8 val; + + twl_i2c_read_u8(TWL4030_MODULE_GPIO, &val, REG_GPIODATADIR1); + val |= 0x04; /* TWL4030.GPIO2DIR BIT at GPIODATADIR1(0x9B) */ + twl_i2c_write_u8(TWL4030_MODULE_GPIO, val, REG_GPIODATADIR1); + } +#endif + return 0; } @@ -461,6 +478,28 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = { }; #endif +/* VAUX2 for USB */ +static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = { + REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */ + REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */ + REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"), + REGULATOR_SUPPLY("vaux2", NULL), +}; + +static struct regulator_init_data omap3evm_vaux2 = { + .constraints = { + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vaux2_supplies), + .consumer_supplies = omap3evm_vaux2_supplies, +}; + static struct twl4030_platform_data omap3evm_twldata = { /* platform_data for children goes here */ .keypad = &omap3evm_kp_data, @@ -607,6 +646,37 @@ static struct regulator_consumer_supply dummy_supplies[] = { REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), }; +static struct mtd_partition omap3evm_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader", + .offset = 0, + .size = 4*(SZ_128K), + .mask_flags = MTD_WRITEABLE + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, + .size = 14*(SZ_128K), + .mask_flags = MTD_WRITEABLE + }, + { + .name = "U-Boot Env", + .offset = MTDPART_OFS_APPEND, + .size = 2*(SZ_128K) + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, + .size = 40*(SZ_128K) + }, + { + .name = "File system", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, +}; + static void __init omap3_evm_init(void) { struct omap_board_mux *obm; @@ -623,6 +693,9 @@ static void __init omap3_evm_init(void) omap_mux_init_gpio(63, OMAP_PIN_INPUT); omap_hsmmc_init(mmc); + if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) + omap3evm_twldata.vaux2 = &omap3evm_vaux2; + omap3_evm_i2c_init(); omap_display_init(&omap3_evm_dss_data); @@ -656,6 +729,9 @@ static void __init omap3_evm_init(void) } usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); + omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions, + ARRAY_SIZE(omap3evm_nand_partitions)); + omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); omap3evm_init_smsc911x(); omap3_evm_display_init(); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 932e1778aff..fca93d1afd4 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -93,9 +93,6 @@ static struct twl4030_usb_data omap3logic_usb_data = { static struct twl4030_platform_data omap3logic_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .gpio = &omap3logic_gpio_data, .vmmc1 = &omap3logic_vmmc1, diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 982fb2622ab..70f6d1d2546 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -106,7 +106,7 @@ static struct platform_device leds_gpio = { static struct omap_abe_twl6040_data panda_abe_audio_data = { /* Audio out */ .has_hs = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, - /* HandsFree through expasion connector */ + /* HandsFree through expansion connector */ .has_hf = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, /* PandaBoard: FM TX, PandaBoardES: can be connected to audio out */ .has_aux = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, @@ -379,6 +379,9 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), /* dispc2_data0 */ OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* NIRQ2 for twl6040 */ + OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 | + OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), { .reg_offset = OMAP_MUX_TERMINATOR }, }; diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 5c4e6654216..ea3f565ba1a 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -398,24 +398,6 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) return omap2_clksel_set_parent(clk, new_parent); } -/* OMAP3/4 non-CORE DPLL clkops */ - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) - -const struct clkops clkops_omap3_noncore_dpll_ops = { - .enable = omap3_noncore_dpll_enable, - .disable = omap3_noncore_dpll_disable, - .allow_idle = omap3_dpll_allow_idle, - .deny_idle = omap3_dpll_deny_idle, -}; - -const struct clkops clkops_omap3_core_dpll_ops = { - .allow_idle = omap3_dpll_allow_idle, - .deny_idle = omap3_dpll_deny_idle, -}; - -#endif - /* * OMAP2+ clock reset and init functions */ diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index a1bb23a2335..35ec5f3d9a7 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -155,4 +155,18 @@ extern const struct clkops clkops_omap3_noncore_dpll_ops; extern const struct clkops clkops_omap3_core_dpll_ops; extern const struct clkops clkops_omap4_dpllmx_ops; +/* clksel_rate blocks shared between OMAP44xx and AM33xx */ +extern const struct clksel_rate div_1_0_rates[]; +extern const struct clksel_rate div_1_1_rates[]; +extern const struct clksel_rate div_1_2_rates[]; +extern const struct clksel_rate div_1_3_rates[]; +extern const struct clksel_rate div_1_4_rates[]; +extern const struct clksel_rate div31_1to31_rates[]; + +/* clocks shared between various OMAP SoCs */ +extern struct clk virt_19200000_ck; +extern struct clk virt_26000000_ck; + +extern int am33xx_clk_init(void); + #endif diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index bace9308a4d..002745181ad 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1774,8 +1774,6 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "osc_ck", &osc_ck, CK_242X), CLK(NULL, "sys_ck", &sys_ck, CK_242X), CLK(NULL, "alt_ck", &alt_ck, CK_242X), - CLK("omap-mcbsp.1", "pad_fck", &mcbsp_clks, CK_242X), - CLK("omap-mcbsp.2", "pad_fck", &mcbsp_clks, CK_242X), CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_242X), /* internal analog sources */ CLK(NULL, "dpll_ck", &dpll_ck, CK_242X), @@ -1784,8 +1782,6 @@ static struct omap_clk omap2420_clks[] = { /* internal prcm root sources */ CLK(NULL, "func_54m_ck", &func_54m_ck, CK_242X), CLK(NULL, "core_ck", &core_ck, CK_242X), - CLK("omap-mcbsp.1", "prcm_fck", &func_96m_ck, CK_242X), - CLK("omap-mcbsp.2", "prcm_fck", &func_96m_ck, CK_242X), CLK(NULL, "func_96m_ck", &func_96m_ck, CK_242X), CLK(NULL, "func_48m_ck", &func_48m_ck, CK_242X), CLK(NULL, "func_12m_ck", &func_12m_ck, CK_242X), @@ -1901,42 +1897,9 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "pka_ick", &pka_ick, CK_242X), CLK(NULL, "usb_fck", &usb_fck, CK_242X), CLK("musb-hdrc", "fck", &osc_ck, CK_242X), - CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.4", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.5", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.6", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.7", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.8", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.9", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.10", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.11", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.12", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.1", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.2", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.3", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.4", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.5", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.6", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.7", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.8", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.9", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.10", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.11", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.12", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.1", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.2", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.3", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.4", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.5", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.6", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.7", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.8", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.9", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.10", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.11", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.12", "alt_ck", &alt_ck, CK_243X), + CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_243X), + CLK(NULL, "timer_sys_ck", &sys_ck, CK_243X), + CLK(NULL, "timer_ext_ck", &alt_ck, CK_243X), }; /* diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index 3b4d09a5039..cacabb070e2 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -1858,11 +1858,6 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "osc_ck", &osc_ck, CK_243X), CLK(NULL, "sys_ck", &sys_ck, CK_243X), CLK(NULL, "alt_ck", &alt_ck, CK_243X), - CLK("omap-mcbsp.1", "pad_fck", &mcbsp_clks, CK_243X), - CLK("omap-mcbsp.2", "pad_fck", &mcbsp_clks, CK_243X), - CLK("omap-mcbsp.3", "pad_fck", &mcbsp_clks, CK_243X), - CLK("omap-mcbsp.4", "pad_fck", &mcbsp_clks, CK_243X), - CLK("omap-mcbsp.5", "pad_fck", &mcbsp_clks, CK_243X), CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_243X), /* internal analog sources */ CLK(NULL, "dpll_ck", &dpll_ck, CK_243X), @@ -1871,11 +1866,6 @@ static struct omap_clk omap2430_clks[] = { /* internal prcm root sources */ CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X), CLK(NULL, "core_ck", &core_ck, CK_243X), - CLK("omap-mcbsp.1", "prcm_fck", &func_96m_ck, CK_243X), - CLK("omap-mcbsp.2", "prcm_fck", &func_96m_ck, CK_243X), - CLK("omap-mcbsp.3", "prcm_fck", &func_96m_ck, CK_243X), - CLK("omap-mcbsp.4", "prcm_fck", &func_96m_ck, CK_243X), - CLK("omap-mcbsp.5", "prcm_fck", &func_96m_ck, CK_243X), CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X), CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X), CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X), @@ -2000,42 +1990,9 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), - CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.4", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.5", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.6", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.7", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.8", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.9", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.10", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.11", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.12", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.1", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.2", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.3", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.4", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.5", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.6", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.7", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.8", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.9", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.10", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.11", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.12", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.1", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.2", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.3", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.4", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.5", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.6", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.7", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.8", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.9", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.10", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.11", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.12", "alt_ck", &alt_ck, CK_243X), + CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_243X), + CLK(NULL, "timer_sys_ck", &sys_ck, CK_243X), + CLK(NULL, "timer_ext_ck", &alt_ck, CK_243X), }; /* diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c new file mode 100644 index 00000000000..25bbcc7ca4d --- /dev/null +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -0,0 +1,1105 @@ +/* + * AM33XX Clock data + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/clk.h> +#include <plat/clkdev_omap.h> +#include <plat/am33xx.h> + +#include "iomap.h" +#include "control.h" +#include "clock.h" +#include "cm.h" +#include "cm33xx.h" +#include "cm-regbits-33xx.h" +#include "prm.h" + +/* Maximum DPLL multiplier, divider values for AM33XX */ +#define AM33XX_MAX_DPLL_MULT 2047 +#define AM33XX_MAX_DPLL_DIV 128 + +/* Modulemode control */ +#define AM33XX_MODULEMODE_HWCTRL 0 +#define AM33XX_MODULEMODE_SWCTRL 1 + +/* TRM ERRATA: Timer 3 & 6 default parent (TCLKIN) may not be always + * physically present, in such a case HWMOD enabling of + * clock would be failure with default parent. And timer + * probe thinks clock is already enabled, this leads to + * crash upon accessing timer 3 & 6 registers in probe. + * Fix by setting parent of both these timers to master + * oscillator clock. + */ +static inline void am33xx_init_timer_parent(struct clk *clk) +{ + omap2_clksel_set_parent(clk, clk->parent); +} + +/* Root clocks */ + +/* RTC 32k */ +static struct clk clk_32768_ck = { + .name = "clk_32768_ck", + .clkdm_name = "l4_rtc_clkdm", + .rate = 32768, + .ops = &clkops_null, +}; + +/* On-Chip 32KHz RC OSC */ +static struct clk clk_rc32k_ck = { + .name = "clk_rc32k_ck", + .rate = 32000, + .ops = &clkops_null, +}; + +/* Crystal input clks */ +static struct clk virt_24000000_ck = { + .name = "virt_24000000_ck", + .rate = 24000000, + .ops = &clkops_null, +}; + +static struct clk virt_25000000_ck = { + .name = "virt_25000000_ck", + .rate = 25000000, + .ops = &clkops_null, +}; + +/* Oscillator clock */ +/* 19.2, 24, 25 or 26 MHz */ +static const struct clksel sys_clkin_sel[] = { + { .parent = &virt_19200000_ck, .rates = div_1_0_rates }, + { .parent = &virt_24000000_ck, .rates = div_1_1_rates }, + { .parent = &virt_25000000_ck, .rates = div_1_2_rates }, + { .parent = &virt_26000000_ck, .rates = div_1_3_rates }, + { .parent = NULL }, +}; + +/* External clock - 12 MHz */ +static struct clk tclkin_ck = { + .name = "tclkin_ck", + .rate = 12000000, + .ops = &clkops_null, +}; + +/* + * sys_clk in: input to the dpll and also used as funtional clock for, + * adc_tsc, smartreflex0-1, timer1-7, mcasp0-1, dcan0-1, cefuse + * + */ +static struct clk sys_clkin_ck = { + .name = "sys_clkin_ck", + .parent = &virt_24000000_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = AM33XX_CTRL_REGADDR(AM33XX_CONTROL_STATUS), + .clksel_mask = AM33XX_CONTROL_STATUS_SYSBOOT1_MASK, + .clksel = sys_clkin_sel, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +/* DPLL_CORE */ +static struct dpll_data dpll_core_dd = { + .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_CORE, + .clk_bypass = &sys_clkin_ck, + .clk_ref = &sys_clkin_ck, + .control_reg = AM33XX_CM_CLKMODE_DPLL_CORE, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .idlest_reg = AM33XX_CM_IDLEST_DPLL_CORE, + .mult_mask = AM33XX_DPLL_MULT_MASK, + .div1_mask = AM33XX_DPLL_DIV_MASK, + .enable_mask = AM33XX_DPLL_EN_MASK, + .idlest_mask = AM33XX_ST_DPLL_CLK_MASK, + .max_multiplier = AM33XX_MAX_DPLL_MULT, + .max_divider = AM33XX_MAX_DPLL_DIV, + .min_divider = 1, +}; + +/* CLKDCOLDO output */ +static struct clk dpll_core_ck = { + .name = "dpll_core_ck", + .parent = &sys_clkin_ck, + .dpll_data = &dpll_core_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_omap3_core_dpll_ops, + .recalc = &omap3_dpll_recalc, +}; + +static struct clk dpll_core_x2_ck = { + .name = "dpll_core_x2_ck", + .parent = &dpll_core_ck, + .flags = CLOCK_CLKOUTX2, + .ops = &clkops_null, + .recalc = &omap3_clkoutx2_recalc, +}; + + +static const struct clksel dpll_core_m4_div[] = { + { .parent = &dpll_core_x2_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_core_m4_ck = { + .name = "dpll_core_m4_ck", + .parent = &dpll_core_x2_ck, + .init = &omap2_init_clksel_parent, + .clksel = dpll_core_m4_div, + .clksel_reg = AM33XX_CM_DIV_M4_DPLL_CORE, + .clksel_mask = AM33XX_HSDIVIDER_CLKOUT1_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +static const struct clksel dpll_core_m5_div[] = { + { .parent = &dpll_core_x2_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_core_m5_ck = { + .name = "dpll_core_m5_ck", + .parent = &dpll_core_x2_ck, + .init = &omap2_init_clksel_parent, + .clksel = dpll_core_m5_div, + .clksel_reg = AM33XX_CM_DIV_M5_DPLL_CORE, + .clksel_mask = AM33XX_HSDIVIDER_CLKOUT2_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +static const struct clksel dpll_core_m6_div[] = { + { .parent = &dpll_core_x2_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_core_m6_ck = { + .name = "dpll_core_m6_ck", + .parent = &dpll_core_x2_ck, + .init = &omap2_init_clksel_parent, + .clksel = dpll_core_m6_div, + .clksel_reg = AM33XX_CM_DIV_M6_DPLL_CORE, + .clksel_mask = AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +/* DPLL_MPU */ +static struct dpll_data dpll_mpu_dd = { + .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_MPU, + .clk_bypass = &sys_clkin_ck, + .clk_ref = &sys_clkin_ck, + .control_reg = AM33XX_CM_CLKMODE_DPLL_MPU, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .idlest_reg = AM33XX_CM_IDLEST_DPLL_MPU, + .mult_mask = AM33XX_DPLL_MULT_MASK, + .div1_mask = AM33XX_DPLL_DIV_MASK, + .enable_mask = AM33XX_DPLL_EN_MASK, + .idlest_mask = AM33XX_ST_DPLL_CLK_MASK, + .max_multiplier = AM33XX_MAX_DPLL_MULT, + .max_divider = AM33XX_MAX_DPLL_DIV, + .min_divider = 1, +}; + +/* CLKOUT: fdpll/M2 */ +static struct clk dpll_mpu_ck = { + .name = "dpll_mpu_ck", + .parent = &sys_clkin_ck, + .dpll_data = &dpll_mpu_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_omap3_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, +}; + +/* + * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2 + * and ALT_CLK1/2) + */ +static const struct clksel dpll_mpu_m2_div[] = { + { .parent = &dpll_mpu_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_mpu_m2_ck = { + .name = "dpll_mpu_m2_ck", + .clkdm_name = "mpu_clkdm", + .parent = &dpll_mpu_ck, + .clksel = dpll_mpu_m2_div, + .clksel_reg = AM33XX_CM_DIV_M2_DPLL_MPU, + .clksel_mask = AM33XX_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +/* DPLL_DDR */ +static struct dpll_data dpll_ddr_dd = { + .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_DDR, + .clk_bypass = &sys_clkin_ck, + .clk_ref = &sys_clkin_ck, + .control_reg = AM33XX_CM_CLKMODE_DPLL_DDR, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .idlest_reg = AM33XX_CM_IDLEST_DPLL_DDR, + .mult_mask = AM33XX_DPLL_MULT_MASK, + .div1_mask = AM33XX_DPLL_DIV_MASK, + .enable_mask = AM33XX_DPLL_EN_MASK, + .idlest_mask = AM33XX_ST_DPLL_CLK_MASK, + .max_multiplier = AM33XX_MAX_DPLL_MULT, + .max_divider = AM33XX_MAX_DPLL_DIV, + .min_divider = 1, +}; + +/* CLKOUT: fdpll/M2 */ +static struct clk dpll_ddr_ck = { + .name = "dpll_ddr_ck", + .parent = &sys_clkin_ck, + .dpll_data = &dpll_ddr_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_null, + .recalc = &omap3_dpll_recalc, +}; + +/* + * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2 + * and ALT_CLK1/2) + */ +static const struct clksel dpll_ddr_m2_div[] = { + { .parent = &dpll_ddr_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_ddr_m2_ck = { + .name = "dpll_ddr_m2_ck", + .parent = &dpll_ddr_ck, + .clksel = dpll_ddr_m2_div, + .clksel_reg = AM33XX_CM_DIV_M2_DPLL_DDR, + .clksel_mask = AM33XX_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +/* emif_fck functional clock */ +static struct clk dpll_ddr_m2_div2_ck = { + .name = "dpll_ddr_m2_div2_ck", + .clkdm_name = "l3_clkdm", + .parent = &dpll_ddr_m2_ck, + .ops = &clkops_null, + .fixed_div = 2, + .recalc = &omap_fixed_divisor_recalc, +}; + +/* DPLL_DISP */ +static struct dpll_data dpll_disp_dd = { + .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_DISP, + .clk_bypass = &sys_clkin_ck, + .clk_ref = &sys_clkin_ck, + .control_reg = AM33XX_CM_CLKMODE_DPLL_DISP, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .idlest_reg = AM33XX_CM_IDLEST_DPLL_DISP, + .mult_mask = AM33XX_DPLL_MULT_MASK, + .div1_mask = AM33XX_DPLL_DIV_MASK, + .enable_mask = AM33XX_DPLL_EN_MASK, + .idlest_mask = AM33XX_ST_DPLL_CLK_MASK, + .max_multiplier = AM33XX_MAX_DPLL_MULT, + .max_divider = AM33XX_MAX_DPLL_DIV, + .min_divider = 1, +}; + +/* CLKOUT: fdpll/M2 */ +static struct clk dpll_disp_ck = { + .name = "dpll_disp_ck", + .parent = &sys_clkin_ck, + .dpll_data = &dpll_disp_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_null, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, +}; + +/* + * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2 + * and ALT_CLK1/2) + */ +static const struct clksel dpll_disp_m2_div[] = { + { .parent = &dpll_disp_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_disp_m2_ck = { + .name = "dpll_disp_m2_ck", + .parent = &dpll_disp_ck, + .clksel = dpll_disp_m2_div, + .clksel_reg = AM33XX_CM_DIV_M2_DPLL_DISP, + .clksel_mask = AM33XX_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +/* DPLL_PER */ +static struct dpll_data dpll_per_dd = { + .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_PERIPH, + .clk_bypass = &sys_clkin_ck, + .clk_ref = &sys_clkin_ck, + .control_reg = AM33XX_CM_CLKMODE_DPLL_PER, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .idlest_reg = AM33XX_CM_IDLEST_DPLL_PER, + .mult_mask = AM33XX_DPLL_MULT_PERIPH_MASK, + .div1_mask = AM33XX_DPLL_PER_DIV_MASK, + .enable_mask = AM33XX_DPLL_EN_MASK, + .idlest_mask = AM33XX_ST_DPLL_CLK_MASK, + .max_multiplier = AM33XX_MAX_DPLL_MULT, + .max_divider = AM33XX_MAX_DPLL_DIV, + .min_divider = 1, + .flags = DPLL_J_TYPE, +}; + +/* CLKDCOLDO */ +static struct clk dpll_per_ck = { + .name = "dpll_per_ck", + .parent = &sys_clkin_ck, + .dpll_data = &dpll_per_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_null, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, +}; + +/* CLKOUT: fdpll/M2 */ +static const struct clksel dpll_per_m2_div[] = { + { .parent = &dpll_per_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_per_m2_ck = { + .name = "dpll_per_m2_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = AM33XX_CM_DIV_M2_DPLL_PER, + .clksel_mask = AM33XX_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +static struct clk dpll_per_m2_div4_wkupdm_ck = { + .name = "dpll_per_m2_div4_wkupdm_ck", + .clkdm_name = "l4_wkup_clkdm", + .parent = &dpll_per_m2_ck, + .fixed_div = 4, + .ops = &clkops_null, + .recalc = &omap_fixed_divisor_recalc, +}; + +static struct clk dpll_per_m2_div4_ck = { + .name = "dpll_per_m2_div4_ck", + .clkdm_name = "l4ls_clkdm", + .parent = &dpll_per_m2_ck, + .fixed_div = 4, + .ops = &clkops_null, + .recalc = &omap_fixed_divisor_recalc, +}; + +static struct clk l3_gclk = { + .name = "l3_gclk", + .clkdm_name = "l3_clkdm", + .parent = &dpll_core_m4_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk dpll_core_m4_div2_ck = { + .name = "dpll_core_m4_div2_ck", + .clkdm_name = "l4_wkup_clkdm", + .parent = &dpll_core_m4_ck, + .ops = &clkops_null, + .fixed_div = 2, + .recalc = &omap_fixed_divisor_recalc, +}; + +static struct clk l4_rtc_gclk = { + .name = "l4_rtc_gclk", + .parent = &dpll_core_m4_ck, + .ops = &clkops_null, + .fixed_div = 2, + .recalc = &omap_fixed_divisor_recalc, +}; + +static struct clk clk_24mhz = { + .name = "clk_24mhz", + .parent = &dpll_per_m2_ck, + .fixed_div = 8, + .ops = &clkops_null, + .recalc = &omap_fixed_divisor_recalc, +}; + +/* + * Below clock nodes describes clockdomains derived out + * of core clock. + */ +static struct clk l4hs_gclk = { + .name = "l4hs_gclk", + .clkdm_name = "l4hs_clkdm", + .parent = &dpll_core_m4_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk l3s_gclk = { + .name = "l3s_gclk", + .clkdm_name = "l3s_clkdm", + .parent = &dpll_core_m4_div2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk l4fw_gclk = { + .name = "l4fw_gclk", + .clkdm_name = "l4fw_clkdm", + .parent = &dpll_core_m4_div2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk l4ls_gclk = { + .name = "l4ls_gclk", + .clkdm_name = "l4ls_clkdm", + .parent = &dpll_core_m4_div2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk sysclk_div_ck = { + .name = "sysclk_div_ck", + .parent = &dpll_core_m4_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +/* + * In order to match the clock domain with hwmod clockdomain entry, + * separate clock nodes is required for the modules which are + * directly getting their funtioncal clock from sys_clkin. + */ +static struct clk adc_tsc_fck = { + .name = "adc_tsc_fck", + .clkdm_name = "l4_wkup_clkdm", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk dcan0_fck = { + .name = "dcan0_fck", + .clkdm_name = "l4ls_clkdm", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk dcan1_fck = { + .name = "dcan1_fck", + .clkdm_name = "l4ls_clkdm", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk mcasp0_fck = { + .name = "mcasp0_fck", + .clkdm_name = "l3s_clkdm", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk mcasp1_fck = { + .name = "mcasp1_fck", + .clkdm_name = "l3s_clkdm", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk smartreflex0_fck = { + .name = "smartreflex0_fck", + .clkdm_name = "l4_wkup_clkdm", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk smartreflex1_fck = { + .name = "smartreflex1_fck", + .clkdm_name = "l4_wkup_clkdm", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +/* + * Modules clock nodes + * + * The following clock leaf nodes are added for the moment because: + * + * - hwmod data is not present for these modules, either hwmod + * control is not required or its not populated. + * - Driver code is not yet migrated to use hwmod/runtime pm + * - Modules outside kernel access (to disable them by default) + * + * - debugss + * - mmu (gfx domain) + * - cefuse + * - usbotg_fck (its additional clock and not really a modulemode) + * - ieee5000 + */ +static struct clk debugss_ick = { + .name = "debugss_ick", + .clkdm_name = "l3_aon_clkdm", + .parent = &dpll_core_m4_ck, + .ops = &clkops_omap2_dflt, + .enable_reg = AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, + .enable_bit = AM33XX_MODULEMODE_SWCTRL, + .recalc = &followparent_recalc, +}; + +static struct clk mmu_fck = { + .name = "mmu_fck", + .clkdm_name = "gfx_l3_clkdm", + .parent = &dpll_core_m4_ck, + .ops = &clkops_omap2_dflt, + .enable_reg = AM33XX_CM_GFX_MMUDATA_CLKCTRL, + .enable_bit = AM33XX_MODULEMODE_SWCTRL, + .recalc = &followparent_recalc, +}; + +static struct clk cefuse_fck = { + .name = "cefuse_fck", + .clkdm_name = "l4_cefuse_clkdm", + .parent = &sys_clkin_ck, + .enable_reg = AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL, + .enable_bit = AM33XX_MODULEMODE_SWCTRL, + .ops = &clkops_omap2_dflt, + .recalc = &followparent_recalc, +}; + +/* + * clkdiv32 is generated from fixed division of 732.4219 + */ +static struct clk clkdiv32k_ick = { + .name = "clkdiv32k_ick", + .clkdm_name = "clk_24mhz_clkdm", + .rate = 32768, + .parent = &clk_24mhz, + .enable_reg = AM33XX_CM_PER_CLKDIV32K_CLKCTRL, + .enable_bit = AM33XX_MODULEMODE_SWCTRL, + .ops = &clkops_omap2_dflt, +}; + +static struct clk usbotg_fck = { + .name = "usbotg_fck", + .clkdm_name = "l3s_clkdm", + .parent = &dpll_per_ck, + .enable_reg = AM33XX_CM_CLKDCOLDO_DPLL_PER, + .enable_bit = AM33XX_ST_DPLL_CLKDCOLDO_SHIFT, + .ops = &clkops_omap2_dflt, + .recalc = &followparent_recalc, +}; + +static struct clk ieee5000_fck = { + .name = "ieee5000_fck", + .clkdm_name = "l3s_clkdm", + .parent = &dpll_core_m4_div2_ck, + .enable_reg = AM33XX_CM_PER_IEEE5000_CLKCTRL, + .enable_bit = AM33XX_MODULEMODE_SWCTRL, + .ops = &clkops_omap2_dflt, + .recalc = &followparent_recalc, +}; + +/* Timers */ +static const struct clksel timer1_clkmux_sel[] = { + { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, + { .parent = &clkdiv32k_ick, .rates = div_1_1_rates }, + { .parent = &tclkin_ck, .rates = div_1_2_rates }, + { .parent = &clk_rc32k_ck, .rates = div_1_3_rates }, + { .parent = &clk_32768_ck, .rates = div_1_4_rates }, + { .parent = NULL }, +}; + +static struct clk timer1_fck = { + .name = "timer1_fck", + .clkdm_name = "l4ls_clkdm", + .parent = &sys_clkin_ck, + .init = &omap2_init_clksel_parent, + .clksel = timer1_clkmux_sel, + .clksel_reg = AM33XX_CLKSEL_TIMER1MS_CLK, + .clksel_mask = AM33XX_CLKSEL_0_2_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel timer2_to_7_clk_sel[] = { + { .parent = &tclkin_ck, .rates = div_1_0_rates }, + { .parent = &sys_clkin_ck, .rates = div_1_1_rates }, + { .parent = &clkdiv32k_ick, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +static struct clk timer2_fck = { + .name = "timer2_fck", + .clkdm_name = "l4ls_clkdm", + .parent = &sys_clkin_ck, + .init = &omap2_init_clksel_parent, + .clksel = timer2_to_7_clk_sel, + .clksel_reg = AM33XX_CLKSEL_TIMER2_CLK, + .clksel_mask = AM33XX_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk timer3_fck = { + .name = "timer3_fck", + .clkdm_name = "l4ls_clkdm", + .parent = &sys_clkin_ck, + .init = &am33xx_init_timer_parent, + .clksel = timer2_to_7_clk_sel, + .clksel_reg = AM33XX_CLKSEL_TIMER3_CLK, + .clksel_mask = AM33XX_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk timer4_fck = { + .name = "timer4_fck", + .clkdm_name = "l4ls_clkdm", + .parent = &sys_clkin_ck, + .init = &omap2_init_clksel_parent, + .clksel = timer2_to_7_clk_sel, + .clksel_reg = AM33XX_CLKSEL_TIMER4_CLK, + .clksel_mask = AM33XX_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk timer5_fck = { + .name = "timer5_fck", + .clkdm_name = "l4ls_clkdm", + .parent = &sys_clkin_ck, + .init = &omap2_init_clksel_parent, + .clksel = timer2_to_7_clk_sel, + .clksel_reg = AM33XX_CLKSEL_TIMER5_CLK, + .clksel_mask = AM33XX_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk timer6_fck = { + .name = "timer6_fck", + .clkdm_name = "l4ls_clkdm", + .parent = &sys_clkin_ck, + .init = &am33xx_init_timer_parent, + .clksel = timer2_to_7_clk_sel, + .clksel_reg = AM33XX_CLKSEL_TIMER6_CLK, + .clksel_mask = AM33XX_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk timer7_fck = { + .name = "timer7_fck", + .clkdm_name = "l4ls_clkdm", + .parent = &sys_clkin_ck, + .init = &omap2_init_clksel_parent, + .clksel = timer2_to_7_clk_sel, + .clksel_reg = AM33XX_CLKSEL_TIMER7_CLK, + .clksel_mask = AM33XX_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk cpsw_125mhz_gclk = { + .name = "cpsw_125mhz_gclk", + .clkdm_name = "cpsw_125mhz_clkdm", + .parent = &dpll_core_m5_ck, + .ops = &clkops_null, + .fixed_div = 2, + .recalc = &omap_fixed_divisor_recalc, +}; + +static const struct clksel cpsw_cpts_rft_clkmux_sel[] = { + { .parent = &dpll_core_m5_ck, .rates = div_1_0_rates }, + { .parent = &dpll_core_m4_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk cpsw_cpts_rft_clk = { + .name = "cpsw_cpts_rft_clk", + .clkdm_name = "cpsw_125mhz_clkdm", + .parent = &dpll_core_m5_ck, + .clksel = cpsw_cpts_rft_clkmux_sel, + .clksel_reg = AM33XX_CM_CPTS_RFT_CLKSEL, + .clksel_mask = AM33XX_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +/* gpio */ +static const struct clksel gpio0_dbclk_mux_sel[] = { + { .parent = &clk_rc32k_ck, .rates = div_1_0_rates }, + { .parent = &clk_32768_ck, .rates = div_1_1_rates }, + { .parent = &clkdiv32k_ick, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +static struct clk gpio0_dbclk_mux_ck = { + .name = "gpio0_dbclk_mux_ck", + .clkdm_name = "l4_wkup_clkdm", + .parent = &clk_rc32k_ck, + .init = &omap2_init_clksel_parent, + .clksel = gpio0_dbclk_mux_sel, + .clksel_reg = AM33XX_CLKSEL_GPIO0_DBCLK, + .clksel_mask = AM33XX_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpio0_dbclk = { + .name = "gpio0_dbclk", + .clkdm_name = "l4_wkup_clkdm", + .parent = &gpio0_dbclk_mux_ck, + .enable_reg = AM33XX_CM_WKUP_GPIO0_CLKCTRL, + .enable_bit = AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT, + .ops = &clkops_omap2_dflt, + .recalc = &followparent_recalc, +}; + +static struct clk gpio1_dbclk = { + .name = "gpio1_dbclk", + .clkdm_name = "l4ls_clkdm", + .parent = &clkdiv32k_ick, + .enable_reg = AM33XX_CM_PER_GPIO1_CLKCTRL, + .enable_bit = AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT, + .ops = &clkops_omap2_dflt, + .recalc = &followparent_recalc, +}; + +static struct clk gpio2_dbclk = { + .name = "gpio2_dbclk", + .clkdm_name = "l4ls_clkdm", + .parent = &clkdiv32k_ick, + .enable_reg = AM33XX_CM_PER_GPIO2_CLKCTRL, + .enable_bit = AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT, + .ops = &clkops_omap2_dflt, + .recalc = &followparent_recalc, +}; + +static struct clk gpio3_dbclk = { + .name = "gpio3_dbclk", + .clkdm_name = "l4ls_clkdm", + .parent = &clkdiv32k_ick, + .enable_reg = AM33XX_CM_PER_GPIO3_CLKCTRL, + .enable_bit = AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT, + .ops = &clkops_omap2_dflt, + .recalc = &followparent_recalc, +}; + +static const struct clksel pruss_ocp_clk_mux_sel[] = { + { .parent = &l3_gclk, .rates = div_1_0_rates }, + { .parent = &dpll_disp_m2_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk pruss_ocp_gclk = { + .name = "pruss_ocp_gclk", + .clkdm_name = "pruss_ocp_clkdm", + .parent = &l3_gclk, + .init = &omap2_init_clksel_parent, + .clksel = pruss_ocp_clk_mux_sel, + .clksel_reg = AM33XX_CLKSEL_PRUSS_OCP_CLK, + .clksel_mask = AM33XX_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static const struct clksel lcd_clk_mux_sel[] = { + { .parent = &dpll_disp_m2_ck, .rates = div_1_0_rates }, + { .parent = &dpll_core_m5_ck, .rates = div_1_1_rates }, + { .parent = &dpll_per_m2_ck, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +static struct clk lcd_gclk = { + .name = "lcd_gclk", + .clkdm_name = "lcdc_clkdm", + .parent = &dpll_disp_m2_ck, + .init = &omap2_init_clksel_parent, + .clksel = lcd_clk_mux_sel, + .clksel_reg = AM33XX_CLKSEL_LCDC_PIXEL_CLK, + .clksel_mask = AM33XX_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk mmc_clk = { + .name = "mmc_clk", + .clkdm_name = "l4ls_clkdm", + .parent = &dpll_per_m2_ck, + .ops = &clkops_null, + .fixed_div = 2, + .recalc = &omap_fixed_divisor_recalc, +}; + +static struct clk mmc2_fck = { + .name = "mmc2_fck", + .clkdm_name = "l3s_clkdm", + .parent = &mmc_clk, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static const struct clksel gfx_clksel_sel[] = { + { .parent = &dpll_core_m4_ck, .rates = div_1_0_rates }, + { .parent = &dpll_per_m2_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk gfx_fclk_clksel_ck = { + .name = "gfx_fclk_clksel_ck", + .parent = &dpll_core_m4_ck, + .clksel = gfx_clksel_sel, + .ops = &clkops_null, + .clksel_reg = AM33XX_CLKSEL_GFX_FCLK, + .clksel_mask = AM33XX_CLKSEL_GFX_FCLK_MASK, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate div_1_0_2_1_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_AM33XX }, + { .div = 2, .val = 1, .flags = RATE_IN_AM33XX }, + { .div = 0 }, +}; + +static const struct clksel gfx_div_sel[] = { + { .parent = &gfx_fclk_clksel_ck, .rates = div_1_0_2_1_rates }, + { .parent = NULL }, +}; + +static struct clk gfx_fck_div_ck = { + .name = "gfx_fck_div_ck", + .clkdm_name = "gfx_l3_clkdm", + .parent = &gfx_fclk_clksel_ck, + .init = &omap2_init_clksel_parent, + .clksel = gfx_div_sel, + .clksel_reg = AM33XX_CLKSEL_GFX_FCLK, + .clksel_mask = AM33XX_CLKSEL_0_0_MASK, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .ops = &clkops_null, +}; + +static const struct clksel sysclkout_pre_sel[] = { + { .parent = &clk_32768_ck, .rates = div_1_0_rates }, + { .parent = &l3_gclk, .rates = div_1_1_rates }, + { .parent = &dpll_ddr_m2_ck, .rates = div_1_2_rates }, + { .parent = &dpll_per_m2_ck, .rates = div_1_3_rates }, + { .parent = &lcd_gclk, .rates = div_1_4_rates }, + { .parent = NULL }, +}; + +static struct clk sysclkout_pre_ck = { + .name = "sysclkout_pre_ck", + .parent = &clk_32768_ck, + .init = &omap2_init_clksel_parent, + .clksel = sysclkout_pre_sel, + .clksel_reg = AM33XX_CM_CLKOUT_CTRL, + .clksel_mask = AM33XX_CLKOUT2SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +/* Divide by 8 clock rates with default clock is 1/1*/ +static const struct clksel_rate div8_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_AM33XX }, + { .div = 2, .val = 1, .flags = RATE_IN_AM33XX }, + { .div = 3, .val = 2, .flags = RATE_IN_AM33XX }, + { .div = 4, .val = 3, .flags = RATE_IN_AM33XX }, + { .div = 5, .val = 4, .flags = RATE_IN_AM33XX }, + { .div = 6, .val = 5, .flags = RATE_IN_AM33XX }, + { .div = 7, .val = 6, .flags = RATE_IN_AM33XX }, + { .div = 8, .val = 7, .flags = RATE_IN_AM33XX }, + { .div = 0 }, +}; + +static const struct clksel clkout2_div[] = { + { .parent = &sysclkout_pre_ck, .rates = div8_rates }, + { .parent = NULL }, +}; + +static struct clk clkout2_ck = { + .name = "clkout2_ck", + .parent = &sysclkout_pre_ck, + .ops = &clkops_omap2_dflt, + .clksel = clkout2_div, + .clksel_reg = AM33XX_CM_CLKOUT_CTRL, + .clksel_mask = AM33XX_CLKOUT2DIV_MASK, + .enable_reg = AM33XX_CM_CLKOUT_CTRL, + .enable_bit = AM33XX_CLKOUT2EN_SHIFT, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +static const struct clksel wdt_clkmux_sel[] = { + { .parent = &clk_rc32k_ck, .rates = div_1_0_rates }, + { .parent = &clkdiv32k_ick, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk wdt1_fck = { + .name = "wdt1_fck", + .clkdm_name = "l4_wkup_clkdm", + .parent = &clk_rc32k_ck, + .init = &omap2_init_clksel_parent, + .clksel = wdt_clkmux_sel, + .clksel_reg = AM33XX_CLKSEL_WDT1_CLK, + .clksel_mask = AM33XX_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +/* + * clkdev + */ +static struct omap_clk am33xx_clks[] = { + CLK(NULL, "clk_32768_ck", &clk_32768_ck, CK_AM33XX), + CLK(NULL, "clk_rc32k_ck", &clk_rc32k_ck, CK_AM33XX), + CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_AM33XX), + CLK(NULL, "virt_24000000_ck", &virt_24000000_ck, CK_AM33XX), + CLK(NULL, "virt_25000000_ck", &virt_25000000_ck, CK_AM33XX), + CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_AM33XX), + CLK(NULL, "sys_clkin_ck", &sys_clkin_ck, CK_AM33XX), + CLK(NULL, "tclkin_ck", &tclkin_ck, CK_AM33XX), + CLK(NULL, "dpll_core_ck", &dpll_core_ck, CK_AM33XX), + CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck, CK_AM33XX), + CLK(NULL, "dpll_core_m4_ck", &dpll_core_m4_ck, CK_AM33XX), + CLK(NULL, "dpll_core_m5_ck", &dpll_core_m5_ck, CK_AM33XX), + CLK(NULL, "dpll_core_m6_ck", &dpll_core_m6_ck, CK_AM33XX), + CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck, CK_AM33XX), + CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck, CK_AM33XX), + CLK(NULL, "dpll_ddr_ck", &dpll_ddr_ck, CK_AM33XX), + CLK(NULL, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck, CK_AM33XX), + CLK(NULL, "dpll_ddr_m2_div2_ck", &dpll_ddr_m2_div2_ck, CK_AM33XX), + CLK(NULL, "dpll_disp_ck", &dpll_disp_ck, CK_AM33XX), + CLK(NULL, "dpll_disp_m2_ck", &dpll_disp_m2_ck, CK_AM33XX), + CLK(NULL, "dpll_per_ck", &dpll_per_ck, CK_AM33XX), + CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck, CK_AM33XX), + CLK(NULL, "dpll_per_m2_div4_wkupdm_ck", &dpll_per_m2_div4_wkupdm_ck, CK_AM33XX), + CLK(NULL, "dpll_per_m2_div4_ck", &dpll_per_m2_div4_ck, CK_AM33XX), + CLK(NULL, "adc_tsc_fck", &adc_tsc_fck, CK_AM33XX), + CLK(NULL, "cefuse_fck", &cefuse_fck, CK_AM33XX), + CLK(NULL, "clkdiv32k_ick", &clkdiv32k_ick, CK_AM33XX), + CLK(NULL, "dcan0_fck", &dcan0_fck, CK_AM33XX), + CLK(NULL, "dcan1_fck", &dcan1_fck, CK_AM33XX), + CLK(NULL, "debugss_ick", &debugss_ick, CK_AM33XX), + CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk, CK_AM33XX), + CLK("davinci-mcasp.0", NULL, &mcasp0_fck, CK_AM33XX), + CLK("davinci-mcasp.1", NULL, &mcasp1_fck, CK_AM33XX), + CLK("NULL", "mmc2_fck", &mmc2_fck, CK_AM33XX), + CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX), + CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX), + CLK(NULL, "smartreflex1_fck", &smartreflex1_fck, CK_AM33XX), + CLK(NULL, "gpt1_fck", &timer1_fck, CK_AM33XX), + CLK(NULL, "gpt2_fck", &timer2_fck, CK_AM33XX), + CLK(NULL, "gpt3_fck", &timer3_fck, CK_AM33XX), + CLK(NULL, "gpt4_fck", &timer4_fck, CK_AM33XX), + CLK(NULL, "gpt5_fck", &timer5_fck, CK_AM33XX), + CLK(NULL, "gpt6_fck", &timer6_fck, CK_AM33XX), + CLK(NULL, "gpt7_fck", &timer7_fck, CK_AM33XX), + CLK(NULL, "usbotg_fck", &usbotg_fck, CK_AM33XX), + CLK(NULL, "ieee5000_fck", &ieee5000_fck, CK_AM33XX), + CLK(NULL, "wdt1_fck", &wdt1_fck, CK_AM33XX), + CLK(NULL, "l4_rtc_gclk", &l4_rtc_gclk, CK_AM33XX), + CLK(NULL, "l3_gclk", &l3_gclk, CK_AM33XX), + CLK(NULL, "dpll_core_m4_div2_ck", &dpll_core_m4_div2_ck, CK_AM33XX), + CLK(NULL, "l4hs_gclk", &l4hs_gclk, CK_AM33XX), + CLK(NULL, "l3s_gclk", &l3s_gclk, CK_AM33XX), + CLK(NULL, "l4fw_gclk", &l4fw_gclk, CK_AM33XX), + CLK(NULL, "l4ls_gclk", &l4ls_gclk, CK_AM33XX), + CLK(NULL, "clk_24mhz", &clk_24mhz, CK_AM33XX), + CLK(NULL, "sysclk_div_ck", &sysclk_div_ck, CK_AM33XX), + CLK(NULL, "cpsw_125mhz_gclk", &cpsw_125mhz_gclk, CK_AM33XX), + CLK(NULL, "cpsw_cpts_rft_clk", &cpsw_cpts_rft_clk, CK_AM33XX), + CLK(NULL, "gpio0_dbclk_mux_ck", &gpio0_dbclk_mux_ck, CK_AM33XX), + CLK(NULL, "gpio0_dbclk", &gpio0_dbclk, CK_AM33XX), + CLK(NULL, "gpio1_dbclk", &gpio1_dbclk, CK_AM33XX), + CLK(NULL, "gpio2_dbclk", &gpio2_dbclk, CK_AM33XX), + CLK(NULL, "gpio3_dbclk", &gpio3_dbclk, CK_AM33XX), + CLK(NULL, "lcd_gclk", &lcd_gclk, CK_AM33XX), + CLK(NULL, "mmc_clk", &mmc_clk, CK_AM33XX), + CLK(NULL, "gfx_fclk_clksel_ck", &gfx_fclk_clksel_ck, CK_AM33XX), + CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck, CK_AM33XX), + CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck, CK_AM33XX), + CLK(NULL, "clkout2_ck", &clkout2_ck, CK_AM33XX), +}; + +int __init am33xx_clk_init(void) +{ + struct omap_clk *c; + u32 cpu_clkflg; + + if (soc_is_am33xx()) { + cpu_mask = RATE_IN_AM33XX; + cpu_clkflg = CK_AM33XX; + } + + clk_init(&omap2_clk_functions); + + for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++) + clk_preinit(c->lk.clk); + + for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++) { + if (c->cpu & cpu_clkflg) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); + omap2_init_clk_clkdm(c->lk.clk); + } + } + + recalculate_root_clocks(); + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_enable_init_clocks(); + + return 0; +} diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 1efdec236ae..91b3d5c60bf 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -93,18 +93,6 @@ static struct clk virt_16_8m_ck = { .rate = 16800000, }; -static struct clk virt_19_2m_ck = { - .name = "virt_19_2m_ck", - .ops = &clkops_null, - .rate = 19200000, -}; - -static struct clk virt_26m_ck = { - .name = "virt_26m_ck", - .ops = &clkops_null, - .rate = 26000000, -}; - static struct clk virt_38_4m_ck = { .name = "virt_38_4m_ck", .ops = &clkops_null, @@ -145,8 +133,8 @@ static const struct clksel osc_sys_clksel[] = { { .parent = &virt_12m_ck, .rates = osc_sys_12m_rates }, { .parent = &virt_13m_ck, .rates = osc_sys_13m_rates }, { .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates }, - { .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates }, - { .parent = &virt_26m_ck, .rates = osc_sys_26m_rates }, + { .parent = &virt_19200000_ck, .rates = osc_sys_19_2m_rates }, + { .parent = &virt_26000000_ck, .rates = osc_sys_26m_rates }, { .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates }, { .parent = NULL }, }; @@ -2490,13 +2478,13 @@ static struct clk uart4_fck = { }; static struct clk uart4_fck_am35xx = { - .name = "uart4_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_UART4_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, + .name = "uart4_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = AM35XX_EN_UART4_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, }; static struct clk gpt2_fck = { @@ -3201,8 +3189,12 @@ static struct clk vpfe_fck = { }; /* - * The UART1/2 functional clock acts as the functional - * clock for UART4. No separate fclk control available. + * The UART1/2 functional clock acts as the functional clock for + * UART4. No separate fclk control available. XXX Well now we have a + * uart4_fck that is apparently used as the UART4 functional clock, + * but it also seems that uart1_fck or uart2_fck are still needed, at + * least for UART4 softresets to complete. This really needs + * clarification. */ static struct clk uart4_ick_am35xx = { .name = "uart4_ick", @@ -3230,17 +3222,12 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_3XXX), CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_3XXX), CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "virt_19_2m_ck", &virt_19_2m_ck, CK_3XXX), - CLK(NULL, "virt_26m_ck", &virt_26m_ck, CK_3XXX), + CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_3XXX), + CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_3XXX), CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX), CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_3XXX), CLK(NULL, "sys_ck", &sys_ck, CK_3XXX), CLK(NULL, "sys_altclk", &sys_altclk, CK_3XXX), - CLK("omap-mcbsp.1", "pad_fck", &mcbsp_clks, CK_3XXX), - CLK("omap-mcbsp.2", "pad_fck", &mcbsp_clks, CK_3XXX), - CLK("omap-mcbsp.3", "pad_fck", &mcbsp_clks, CK_3XXX), - CLK("omap-mcbsp.4", "pad_fck", &mcbsp_clks, CK_3XXX), - CLK("omap-mcbsp.5", "pad_fck", &mcbsp_clks, CK_3XXX), CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_3XXX), CLK(NULL, "sys_clkout1", &sys_clkout1, CK_3XXX), CLK(NULL, "dpll1_ck", &dpll1_ck, CK_3XXX), @@ -3307,8 +3294,6 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("usbhs_omap", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX), - CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "mmchs3_fck", &mmchs3_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_3XXX), @@ -3413,9 +3398,6 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX), CLK(NULL, "gpt12_ick", &gpt12_ick, CK_3XXX), CLK(NULL, "gpt1_ick", &gpt1_ick, CK_3XXX), - CLK("omap-mcbsp.2", "prcm_fck", &per_96m_fck, CK_3XXX), - CLK("omap-mcbsp.3", "prcm_fck", &per_96m_fck, CK_3XXX), - CLK("omap-mcbsp.4", "prcm_fck", &per_96m_fck, CK_3XXX), CLK(NULL, "per_96m_fck", &per_96m_fck, CK_3XXX), CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX), CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX), @@ -3474,38 +3456,16 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX), CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX), CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX), - CLK("davinci_emac", NULL, &emac_ick, CK_AM35XX), + CLK("davinci_emac.0", NULL, &emac_ick, CK_AM35XX), CLK("davinci_mdio.0", NULL, &emac_fck, CK_AM35XX), CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX), CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX), - CLK("musb-am35x", "ick", &hsotgusb_ick_am35xx, CK_AM35XX), - CLK("musb-am35x", "fck", &hsotgusb_fck_am35xx, CK_AM35XX), + CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_am35xx, CK_AM35XX), + CLK(NULL, "hsotgusb_fck", &hsotgusb_fck_am35xx, CK_AM35XX), CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX), CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX), - CLK("omap_timer.1", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.2", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.3", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.4", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.5", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.6", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.7", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.8", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.9", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.10", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.11", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.12", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.1", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.2", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.3", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.4", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.5", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.6", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.7", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.8", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.9", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.10", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.11", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.12", "sys_ck", &sys_ck, CK_3XXX), + CLK(NULL, "timer_32k_ck", &omap_32k_fck, CK_3XXX), + CLK(NULL, "timer_sys_ck", &sys_ck, CK_3XXX), }; @@ -3523,7 +3483,7 @@ int __init omap3xxx_clk_init(void) } else if (cpu_is_ti816x()) { cpu_mask = RATE_IN_TI816X; cpu_clkflg = CK_TI816X; - } else if (cpu_is_am33xx()) { + } else if (soc_is_am33xx()) { cpu_mask = RATE_IN_AM33XX; } else if (cpu_is_ti814x()) { cpu_mask = RATE_IN_TI814X; diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index ba6f9a0a43e..d7f55e43b76 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -107,18 +107,6 @@ static struct clk virt_16800000_ck = { .rate = 16800000, }; -static struct clk virt_19200000_ck = { - .name = "virt_19200000_ck", - .ops = &clkops_null, - .rate = 19200000, -}; - -static struct clk virt_26000000_ck = { - .name = "virt_26000000_ck", - .ops = &clkops_null, - .rate = 26000000, -}; - static struct clk virt_27000000_ck = { .name = "virt_27000000_ck", .ops = &clkops_null, @@ -131,31 +119,6 @@ static struct clk virt_38400000_ck = { .rate = 38400000, }; -static const struct clksel_rate div_1_0_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_4430 }, - { .div = 0 }, -}; - -static const struct clksel_rate div_1_1_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_4430 }, - { .div = 0 }, -}; - -static const struct clksel_rate div_1_2_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_4430 }, - { .div = 0 }, -}; - -static const struct clksel_rate div_1_3_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_4430 }, - { .div = 0 }, -}; - -static const struct clksel_rate div_1_4_rates[] = { - { .div = 1, .val = 4, .flags = RATE_IN_4430 }, - { .div = 0 }, -}; - static const struct clksel_rate div_1_5_rates[] = { { .div = 1, .val = 5, .flags = RATE_IN_4430 }, { .div = 0 }, @@ -289,41 +252,6 @@ static struct clk dpll_abe_x2_ck = { .recalc = &omap3_clkoutx2_recalc, }; -static const struct clksel_rate div31_1to31_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_4430 }, - { .div = 2, .val = 2, .flags = RATE_IN_4430 }, - { .div = 3, .val = 3, .flags = RATE_IN_4430 }, - { .div = 4, .val = 4, .flags = RATE_IN_4430 }, - { .div = 5, .val = 5, .flags = RATE_IN_4430 }, - { .div = 6, .val = 6, .flags = RATE_IN_4430 }, - { .div = 7, .val = 7, .flags = RATE_IN_4430 }, - { .div = 8, .val = 8, .flags = RATE_IN_4430 }, - { .div = 9, .val = 9, .flags = RATE_IN_4430 }, - { .div = 10, .val = 10, .flags = RATE_IN_4430 }, - { .div = 11, .val = 11, .flags = RATE_IN_4430 }, - { .div = 12, .val = 12, .flags = RATE_IN_4430 }, - { .div = 13, .val = 13, .flags = RATE_IN_4430 }, - { .div = 14, .val = 14, .flags = RATE_IN_4430 }, - { .div = 15, .val = 15, .flags = RATE_IN_4430 }, - { .div = 16, .val = 16, .flags = RATE_IN_4430 }, - { .div = 17, .val = 17, .flags = RATE_IN_4430 }, - { .div = 18, .val = 18, .flags = RATE_IN_4430 }, - { .div = 19, .val = 19, .flags = RATE_IN_4430 }, - { .div = 20, .val = 20, .flags = RATE_IN_4430 }, - { .div = 21, .val = 21, .flags = RATE_IN_4430 }, - { .div = 22, .val = 22, .flags = RATE_IN_4430 }, - { .div = 23, .val = 23, .flags = RATE_IN_4430 }, - { .div = 24, .val = 24, .flags = RATE_IN_4430 }, - { .div = 25, .val = 25, .flags = RATE_IN_4430 }, - { .div = 26, .val = 26, .flags = RATE_IN_4430 }, - { .div = 27, .val = 27, .flags = RATE_IN_4430 }, - { .div = 28, .val = 28, .flags = RATE_IN_4430 }, - { .div = 29, .val = 29, .flags = RATE_IN_4430 }, - { .div = 30, .val = 30, .flags = RATE_IN_4430 }, - { .div = 31, .val = 31, .flags = RATE_IN_4430 }, - { .div = 0 }, -}; - static const struct clksel dpll_abe_m2x2_div[] = { { .parent = &dpll_abe_x2_ck, .rates = div31_1to31_rates }, { .parent = NULL }, @@ -3299,17 +3227,17 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "smartreflex_core_fck", &smartreflex_core_fck, CK_443X), CLK(NULL, "smartreflex_iva_fck", &smartreflex_iva_fck, CK_443X), CLK(NULL, "smartreflex_mpu_fck", &smartreflex_mpu_fck, CK_443X), - CLK(NULL, "gpt1_fck", &timer1_fck, CK_443X), - CLK(NULL, "gpt10_fck", &timer10_fck, CK_443X), - CLK(NULL, "gpt11_fck", &timer11_fck, CK_443X), - CLK(NULL, "gpt2_fck", &timer2_fck, CK_443X), - CLK(NULL, "gpt3_fck", &timer3_fck, CK_443X), - CLK(NULL, "gpt4_fck", &timer4_fck, CK_443X), - CLK(NULL, "gpt5_fck", &timer5_fck, CK_443X), - CLK(NULL, "gpt6_fck", &timer6_fck, CK_443X), - CLK(NULL, "gpt7_fck", &timer7_fck, CK_443X), - CLK(NULL, "gpt8_fck", &timer8_fck, CK_443X), - CLK(NULL, "gpt9_fck", &timer9_fck, CK_443X), + CLK(NULL, "timer1_fck", &timer1_fck, CK_443X), + CLK(NULL, "timer10_fck", &timer10_fck, CK_443X), + CLK(NULL, "timer11_fck", &timer11_fck, CK_443X), + CLK(NULL, "timer2_fck", &timer2_fck, CK_443X), + CLK(NULL, "timer3_fck", &timer3_fck, CK_443X), + CLK(NULL, "timer4_fck", &timer4_fck, CK_443X), + CLK(NULL, "timer5_fck", &timer5_fck, CK_443X), + CLK(NULL, "timer6_fck", &timer6_fck, CK_443X), + CLK(NULL, "timer7_fck", &timer7_fck, CK_443X), + CLK(NULL, "timer8_fck", &timer8_fck, CK_443X), + CLK(NULL, "timer9_fck", &timer9_fck, CK_443X), CLK(NULL, "uart1_fck", &uart1_fck, CK_443X), CLK(NULL, "uart2_fck", &uart2_fck, CK_443X), CLK(NULL, "uart3_fck", &uart3_fck, CK_443X), @@ -3385,28 +3313,18 @@ static struct omap_clk omap44xx_clks[] = { CLK("usbhs_omap", "usbhost_ick", &dummy_ck, CK_443X), CLK("usbhs_omap", "usbtll_fck", &dummy_ck, CK_443X), CLK("omap_wdt", "ick", &dummy_ck, CK_443X), - CLK("omap_timer.1", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.2", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.3", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.4", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.5", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.6", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.7", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.8", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.9", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.10", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.11", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.1", "sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.2", "sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.3", "sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.4", "sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.9", "sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.10", "sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.11", "sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.5", "sys_ck", &syc_clk_div_ck, CK_443X), - CLK("omap_timer.6", "sys_ck", &syc_clk_div_ck, CK_443X), - CLK("omap_timer.7", "sys_ck", &syc_clk_div_ck, CK_443X), - CLK("omap_timer.8", "sys_ck", &syc_clk_div_ck, CK_443X), + CLK(NULL, "timer_32k_ck", &sys_32k_ck, CK_443X), + CLK("omap_timer.1", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.2", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.3", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.4", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.9", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.10", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.11", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.5", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("omap_timer.6", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("omap_timer.7", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("omap_timer.8", "timer_sys_ck", &syc_clk_div_ck, CK_443X), }; int __init omap4xxx_clk_init(void) diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c index 6424d46be14..b9f3ba68148 100644 --- a/arch/arm/mach-omap2/clock_common_data.c +++ b/arch/arm/mach-omap2/clock_common_data.c @@ -43,3 +43,80 @@ const struct clksel_rate dsp_ick_rates[] = { { .div = 3, .val = 3, .flags = RATE_IN_243X }, { .div = 0 }, }; + + +/* clksel_rate blocks shared between OMAP44xx and AM33xx */ + +const struct clksel_rate div_1_0_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 0 }, +}; + +const struct clksel_rate div_1_1_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 0 }, +}; + +const struct clksel_rate div_1_2_rates[] = { + { .div = 1, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 0 }, +}; + +const struct clksel_rate div_1_3_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 0 }, +}; + +const struct clksel_rate div_1_4_rates[] = { + { .div = 1, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 0 }, +}; + +const struct clksel_rate div31_1to31_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 2, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 3, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 4, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 5, .val = 5, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 6, .val = 6, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 7, .val = 7, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 8, .val = 8, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 9, .val = 9, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 10, .val = 10, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 11, .val = 11, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 12, .val = 12, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 13, .val = 13, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 14, .val = 14, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 15, .val = 15, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 16, .val = 16, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 17, .val = 17, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 18, .val = 18, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 19, .val = 19, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 20, .val = 20, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 21, .val = 21, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 22, .val = 22, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 23, .val = 23, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 24, .val = 24, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 25, .val = 25, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 26, .val = 26, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 27, .val = 27, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 28, .val = 28, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 29, .val = 29, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 30, .val = 30, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 31, .val = 31, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 0 }, +}; + +/* Clocks shared between various OMAP SoCs */ + +struct clk virt_19200000_ck = { + .name = "virt_19200000_ck", + .ops = &clkops_null, + .rate = 19200000, +}; + +struct clk virt_26000000_ck = { + .name = "virt_26000000_ck", + .ops = &clkops_null, + .rate = 26000000, +}; diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 6227e9505c2..5601dc13785 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -199,6 +199,7 @@ int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh); extern void __init omap242x_clockdomains_init(void); extern void __init omap243x_clockdomains_init(void); extern void __init omap3xxx_clockdomains_init(void); +extern void __init am33xx_clockdomains_init(void); extern void __init omap44xx_clockdomains_init(void); extern void _clkdm_add_autodeps(struct clockdomain *clkdm); extern void _clkdm_del_autodeps(struct clockdomain *clkdm); @@ -206,11 +207,10 @@ extern void _clkdm_del_autodeps(struct clockdomain *clkdm); extern struct clkdm_ops omap2_clkdm_operations; extern struct clkdm_ops omap3_clkdm_operations; extern struct clkdm_ops omap4_clkdm_operations; +extern struct clkdm_ops am33xx_clkdm_operations; extern struct clkdm_dep gfx_24xx_wkdeps[]; extern struct clkdm_dep dsp_24xx_wkdeps[]; extern struct clockdomain wkup_common_clkdm; -extern struct clockdomain prm_common_clkdm; -extern struct clockdomain cm_common_clkdm; #endif diff --git a/arch/arm/mach-omap2/clockdomain33xx.c b/arch/arm/mach-omap2/clockdomain33xx.c new file mode 100644 index 00000000000..aca6388fad7 --- /dev/null +++ b/arch/arm/mach-omap2/clockdomain33xx.c @@ -0,0 +1,74 @@ +/* + * AM33XX clockdomain control + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * Derived from mach-omap2/clockdomain44xx.c written by Rajendra Nayak + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> + +#include "clockdomain.h" +#include "cm33xx.h" + + +static int am33xx_clkdm_sleep(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs); + return 0; +} + +static int am33xx_clkdm_wakeup(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs); + return 0; +} + +static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); +} + +static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); +} + +static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm) +{ + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + return am33xx_clkdm_wakeup(clkdm); + + return 0; +} + +static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); + + if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) + am33xx_clkdm_sleep(clkdm); + + return 0; +} + +struct clkdm_ops am33xx_clkdm_operations = { + .clkdm_sleep = am33xx_clkdm_sleep, + .clkdm_wakeup = am33xx_clkdm_wakeup, + .clkdm_allow_idle = am33xx_clkdm_allow_idle, + .clkdm_deny_idle = am33xx_clkdm_deny_idle, + .clkdm_clk_enable = am33xx_clkdm_clk_enable, + .clkdm_clk_disable = am33xx_clkdm_clk_disable, +}; diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c index 4f04dd11d65..762f2cc542c 100644 --- a/arch/arm/mach-omap2/clockdomain44xx.c +++ b/arch/arm/mach-omap2/clockdomain44xx.c @@ -70,7 +70,7 @@ static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm) static int omap4_clkdm_sleep(struct clockdomain *clkdm) { - omap4_cminst_clkdm_force_sleep(clkdm->prcm_partition, + omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition, clkdm->cm_inst, clkdm->clkdm_offs); return 0; } @@ -90,8 +90,12 @@ static void omap4_clkdm_allow_idle(struct clockdomain *clkdm) static void omap4_clkdm_deny_idle(struct clockdomain *clkdm) { - omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition, - clkdm->cm_inst, clkdm->clkdm_offs); + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + omap4_clkdm_wakeup(clkdm); + else + omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition, + clkdm->cm_inst, + clkdm->clkdm_offs); } static int omap4_clkdm_clk_enable(struct clockdomain *clkdm) diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c index 0ab8e46d5b2..5c741852fac 100644 --- a/arch/arm/mach-omap2/clockdomains2420_data.c +++ b/arch/arm/mach-omap2/clockdomains2420_data.c @@ -131,8 +131,6 @@ static struct clockdomain dss_2420_clkdm = { static struct clockdomain *clockdomains_omap242x[] __initdata = { &wkup_common_clkdm, - &cm_common_clkdm, - &prm_common_clkdm, &mpu_2420_clkdm, &iva1_2420_clkdm, &dsp_2420_clkdm, diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c index 3645ed04489..f09617555e1 100644 --- a/arch/arm/mach-omap2/clockdomains2430_data.c +++ b/arch/arm/mach-omap2/clockdomains2430_data.c @@ -157,8 +157,6 @@ static struct clockdomain dss_2430_clkdm = { static struct clockdomain *clockdomains_omap243x[] __initdata = { &wkup_common_clkdm, - &cm_common_clkdm, - &prm_common_clkdm, &mpu_2430_clkdm, &mdm_clkdm, &dsp_2430_clkdm, diff --git a/arch/arm/mach-omap2/clockdomains33xx_data.c b/arch/arm/mach-omap2/clockdomains33xx_data.c new file mode 100644 index 00000000000..32c90fd9eba --- /dev/null +++ b/arch/arm/mach-omap2/clockdomains33xx_data.c @@ -0,0 +1,196 @@ +/* + * AM33XX Clock Domain data. + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/io.h> + +#include "clockdomain.h" +#include "cm.h" +#include "cm33xx.h" +#include "cm-regbits-33xx.h" + +static struct clockdomain l4ls_am33xx_clkdm = { + .name = "l4ls_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l3s_am33xx_clkdm = { + .name = "l3s_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_L3S_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4fw_am33xx_clkdm = { + .name = "l4fw_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_L4FW_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l3_am33xx_clkdm = { + .name = "l3_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_L3_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4hs_am33xx_clkdm = { + .name = "l4hs_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_L4HS_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain ocpwp_l3_am33xx_clkdm = { + .name = "ocpwp_l3_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain pruss_ocp_am33xx_clkdm = { + .name = "pruss_ocp_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_PRUSS_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain cpsw_125mhz_am33xx_clkdm = { + .name = "cpsw_125mhz_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_CPSW_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain lcdc_am33xx_clkdm = { + .name = "lcdc_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_LCDC_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain clk_24mhz_am33xx_clkdm = { + .name = "clk_24mhz_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4_wkup_am33xx_clkdm = { + .name = "l4_wkup_clkdm", + .pwrdm = { .name = "wkup_pwrdm" }, + .cm_inst = AM33XX_CM_WKUP_MOD, + .clkdm_offs = AM33XX_CM_WKUP_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l3_aon_am33xx_clkdm = { + .name = "l3_aon_clkdm", + .pwrdm = { .name = "wkup_pwrdm" }, + .cm_inst = AM33XX_CM_WKUP_MOD, + .clkdm_offs = AM33XX_CM_L3_AON_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4_wkup_aon_am33xx_clkdm = { + .name = "l4_wkup_aon_clkdm", + .pwrdm = { .name = "wkup_pwrdm" }, + .cm_inst = AM33XX_CM_WKUP_MOD, + .clkdm_offs = AM33XX_CM_L4_WKUP_AON_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain mpu_am33xx_clkdm = { + .name = "mpu_clkdm", + .pwrdm = { .name = "mpu_pwrdm" }, + .cm_inst = AM33XX_CM_MPU_MOD, + .clkdm_offs = AM33XX_CM_MPU_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4_rtc_am33xx_clkdm = { + .name = "l4_rtc_clkdm", + .pwrdm = { .name = "rtc_pwrdm" }, + .cm_inst = AM33XX_CM_RTC_MOD, + .clkdm_offs = AM33XX_CM_RTC_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain gfx_l3_am33xx_clkdm = { + .name = "gfx_l3_clkdm", + .pwrdm = { .name = "gfx_pwrdm" }, + .cm_inst = AM33XX_CM_GFX_MOD, + .clkdm_offs = AM33XX_CM_GFX_L3_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain gfx_l4ls_gfx_am33xx_clkdm = { + .name = "gfx_l4ls_gfx_clkdm", + .pwrdm = { .name = "gfx_pwrdm" }, + .cm_inst = AM33XX_CM_GFX_MOD, + .clkdm_offs = AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4_cefuse_am33xx_clkdm = { + .name = "l4_cefuse_clkdm", + .pwrdm = { .name = "cefuse_pwrdm" }, + .cm_inst = AM33XX_CM_CEFUSE_MOD, + .clkdm_offs = AM33XX_CM_CEFUSE_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain *clockdomains_am33xx[] __initdata = { + &l4ls_am33xx_clkdm, + &l3s_am33xx_clkdm, + &l4fw_am33xx_clkdm, + &l3_am33xx_clkdm, + &l4hs_am33xx_clkdm, + &ocpwp_l3_am33xx_clkdm, + &pruss_ocp_am33xx_clkdm, + &cpsw_125mhz_am33xx_clkdm, + &lcdc_am33xx_clkdm, + &clk_24mhz_am33xx_clkdm, + &l4_wkup_am33xx_clkdm, + &l3_aon_am33xx_clkdm, + &l4_wkup_aon_am33xx_clkdm, + &mpu_am33xx_clkdm, + &l4_rtc_am33xx_clkdm, + &gfx_l3_am33xx_clkdm, + &gfx_l4ls_gfx_am33xx_clkdm, + &l4_cefuse_am33xx_clkdm, + NULL, +}; + +void __init am33xx_clockdomains_init(void) +{ + clkdm_register_platform_funcs(&am33xx_clkdm_operations); + clkdm_register_clkdms(clockdomains_am33xx); + clkdm_complete_init(); +} diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c index 6038adb9771..56089c49142 100644 --- a/arch/arm/mach-omap2/clockdomains3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c @@ -59,6 +59,12 @@ static struct clkdm_dep gfx_sgx_3xxx_wkdeps[] = { { NULL }, }; +static struct clkdm_dep gfx_sgx_am35x_wkdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + /* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */ static struct clkdm_dep per_wkdeps[] = { { .clkdm_name = "core_l3_clkdm" }, @@ -69,6 +75,14 @@ static struct clkdm_dep per_wkdeps[] = { { NULL }, }; +static struct clkdm_dep per_am35x_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + /* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */ static struct clkdm_dep usbhost_wkdeps[] = { { .clkdm_name = "core_l3_clkdm" }, @@ -79,6 +93,14 @@ static struct clkdm_dep usbhost_wkdeps[] = { { NULL }, }; +static struct clkdm_dep usbhost_am35x_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + /* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */ static struct clkdm_dep mpu_3xxx_wkdeps[] = { { .clkdm_name = "core_l3_clkdm" }, @@ -89,6 +111,14 @@ static struct clkdm_dep mpu_3xxx_wkdeps[] = { { NULL }, }; +static struct clkdm_dep mpu_am35x_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "dss_clkdm" }, + { .clkdm_name = "per_clkdm" }, + { NULL }, +}; + /* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */ static struct clkdm_dep iva2_wkdeps[] = { { .clkdm_name = "core_l3_clkdm" }, @@ -116,6 +146,12 @@ static struct clkdm_dep dss_wkdeps[] = { { NULL }, }; +static struct clkdm_dep dss_am35x_wkdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + /* 3430: PM_WKDEP_NEON: MPU */ static struct clkdm_dep neon_wkdeps[] = { { .clkdm_name = "mpu_clkdm" }, @@ -131,6 +167,11 @@ static struct clkdm_dep dss_sleepdeps[] = { { NULL }, }; +static struct clkdm_dep dss_am35x_sleepdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { NULL }, +}; + /* 3430: CM_SLEEPDEP_PER: MPU, IVA */ static struct clkdm_dep per_sleepdeps[] = { { .clkdm_name = "mpu_clkdm" }, @@ -138,6 +179,11 @@ static struct clkdm_dep per_sleepdeps[] = { { NULL }, }; +static struct clkdm_dep per_am35x_sleepdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { NULL }, +}; + /* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */ static struct clkdm_dep usbhost_sleepdeps[] = { { .clkdm_name = "mpu_clkdm" }, @@ -145,6 +191,11 @@ static struct clkdm_dep usbhost_sleepdeps[] = { { NULL }, }; +static struct clkdm_dep usbhost_am35x_sleepdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { NULL }, +}; + /* 3430: CM_SLEEPDEP_CAM: MPU */ static struct clkdm_dep cam_sleepdeps[] = { { .clkdm_name = "mpu_clkdm" }, @@ -175,6 +226,15 @@ static struct clockdomain mpu_3xxx_clkdm = { .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK, }; +static struct clockdomain mpu_am35x_clkdm = { + .name = "mpu_clkdm", + .pwrdm = { .name = "mpu_pwrdm" }, + .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP, + .dep_bit = OMAP3430_EN_MPU_SHIFT, + .wkdep_srcs = mpu_am35x_wkdeps, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK, +}; + static struct clockdomain neon_clkdm = { .name = "neon_clkdm", .pwrdm = { .name = "neon_pwrdm" }, @@ -210,6 +270,15 @@ static struct clockdomain sgx_clkdm = { .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK, }; +static struct clockdomain sgx_am35x_clkdm = { + .name = "sgx_clkdm", + .pwrdm = { .name = "sgx_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .wkdep_srcs = gfx_sgx_am35x_wkdeps, + .sleepdep_srcs = gfx_sgx_sleepdeps, + .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK, +}; + /* * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but * then that information was removed from the 34xx ES2+ TRM. It is @@ -261,6 +330,16 @@ static struct clockdomain dss_3xxx_clkdm = { .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK, }; +static struct clockdomain dss_am35x_clkdm = { + .name = "dss_clkdm", + .pwrdm = { .name = "dss_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT, + .wkdep_srcs = dss_am35x_wkdeps, + .sleepdep_srcs = dss_am35x_sleepdeps, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK, +}; + static struct clockdomain cam_clkdm = { .name = "cam_clkdm", .pwrdm = { .name = "cam_pwrdm" }, @@ -279,6 +358,15 @@ static struct clockdomain usbhost_clkdm = { .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK, }; +static struct clockdomain usbhost_am35x_clkdm = { + .name = "usbhost_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .wkdep_srcs = usbhost_am35x_wkdeps, + .sleepdep_srcs = usbhost_am35x_sleepdeps, + .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK, +}; + static struct clockdomain per_clkdm = { .name = "per_clkdm", .pwrdm = { .name = "per_pwrdm" }, @@ -289,6 +377,16 @@ static struct clockdomain per_clkdm = { .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK, }; +static struct clockdomain per_am35x_clkdm = { + .name = "per_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .dep_bit = OMAP3430_EN_PER_SHIFT, + .wkdep_srcs = per_am35x_wkdeps, + .sleepdep_srcs = per_am35x_sleepdeps, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK, +}; + /* * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is * switched of even if sdti is in use @@ -341,31 +439,42 @@ static struct clkdm_autodep clkdm_autodeps[] = { } }; +static struct clkdm_autodep clkdm_am35x_autodeps[] = { + { + .clkdm = { .name = "mpu_clkdm" }, + }, + { + .clkdm = { .name = NULL }, + } +}; + /* * */ -static struct clockdomain *clockdomains_omap3430_common[] __initdata = { +static struct clockdomain *clockdomains_common[] __initdata = { &wkup_common_clkdm, - &cm_common_clkdm, - &prm_common_clkdm, - &mpu_3xxx_clkdm, &neon_clkdm, - &iva2_clkdm, - &d2d_clkdm, &core_l3_3xxx_clkdm, &core_l4_3xxx_clkdm, - &dss_3xxx_clkdm, - &cam_clkdm, - &per_clkdm, &emu_clkdm, &dpll1_clkdm, - &dpll2_clkdm, &dpll3_clkdm, &dpll4_clkdm, NULL }; +static struct clockdomain *clockdomains_omap3430[] __initdata = { + &mpu_3xxx_clkdm, + &iva2_clkdm, + &d2d_clkdm, + &dss_3xxx_clkdm, + &cam_clkdm, + &per_clkdm, + &dpll2_clkdm, + NULL +}; + static struct clockdomain *clockdomains_omap3430es1[] __initdata = { &gfx_3430es1_clkdm, NULL, @@ -378,21 +487,41 @@ static struct clockdomain *clockdomains_omap3430es2plus[] __initdata = { NULL, }; +static struct clockdomain *clockdomains_am35x[] __initdata = { + &mpu_am35x_clkdm, + &sgx_am35x_clkdm, + &dss_am35x_clkdm, + &per_am35x_clkdm, + &usbhost_am35x_clkdm, + &dpll5_clkdm, + NULL +}; + void __init omap3xxx_clockdomains_init(void) { struct clockdomain **sc; + unsigned int rev; if (!cpu_is_omap34xx()) return; clkdm_register_platform_funcs(&omap3_clkdm_operations); - clkdm_register_clkdms(clockdomains_omap3430_common); + clkdm_register_clkdms(clockdomains_common); - sc = (omap_rev() == OMAP3430_REV_ES1_0) ? clockdomains_omap3430es1 : - clockdomains_omap3430es2plus; + rev = omap_rev(); - clkdm_register_clkdms(sc); + if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) { + clkdm_register_clkdms(clockdomains_am35x); + clkdm_register_autodeps(clkdm_am35x_autodeps); + } else { + clkdm_register_clkdms(clockdomains_omap3430); + + sc = (rev == OMAP3430_REV_ES1_0) ? + clockdomains_omap3430es1 : clockdomains_omap3430es2plus; + + clkdm_register_clkdms(sc); + clkdm_register_autodeps(clkdm_autodeps); + } - clkdm_register_autodeps(clkdm_autodeps); clkdm_complete_init(); } diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index 7f2133abe7d..63d60a773d3 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -430,8 +430,6 @@ static struct clockdomain *clockdomains_omap44xx[] __initdata = { &l4_wkup_44xx_clkdm, &emu_sys_44xx_clkdm, &l3_dma_44xx_clkdm, - &prm_common_clkdm, - &cm_common_clkdm, NULL }; diff --git a/arch/arm/mach-omap2/clockdomains_common_data.c b/arch/arm/mach-omap2/clockdomains_common_data.c deleted file mode 100644 index 615b1f04967..00000000000 --- a/arch/arm/mach-omap2/clockdomains_common_data.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * OMAP2+-common clockdomain data - * - * Copyright (C) 2008-2012 Texas Instruments, Inc. - * Copyright (C) 2008-2010 Nokia Corporation - * - * Paul Walmsley, Jouni Högander - */ - -#include <linux/kernel.h> -#include <linux/io.h> - -#include "clockdomain.h" - -/* These are implicit clockdomains - they are never defined as such in TRM */ -struct clockdomain prm_common_clkdm = { - .name = "prm_clkdm", - .pwrdm = { .name = "wkup_pwrdm" }, -}; - -struct clockdomain cm_common_clkdm = { - .name = "cm_clkdm", - .pwrdm = { .name = "core_pwrdm" }, -}; diff --git a/arch/arm/mach-omap2/cm-regbits-33xx.h b/arch/arm/mach-omap2/cm-regbits-33xx.h new file mode 100644 index 00000000000..532027ee3d8 --- /dev/null +++ b/arch/arm/mach-omap2/cm-regbits-33xx.h @@ -0,0 +1,687 @@ +/* + * AM33XX Power Management register bits + * + * This file is automatically generated from the AM33XX hardware databases. + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_33XX_H +#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_33XX_H + +/* + * Used by CM_AUTOIDLE_DPLL_CORE, CM_AUTOIDLE_DPLL_DDR, CM_AUTOIDLE_DPLL_DISP, + * CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER + */ +#define AM33XX_AUTO_DPLL_MODE_SHIFT 0 +#define AM33XX_AUTO_DPLL_MODE_MASK (0x7 << 0) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_ADC_FCLK_SHIFT 14 +#define AM33XX_CLKACTIVITY_ADC_FCLK_MASK (1 << 16) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CAN_CLK_SHIFT 11 +#define AM33XX_CLKACTIVITY_CAN_CLK_MASK (1 << 11) + +/* Used by CM_PER_CLK_24MHZ_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_MASK (1 << 4) + +/* Used by CM_PER_CPSW_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_MASK (1 << 4) + +/* Used by CM_PER_L4HS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_MASK (1 << 4) + +/* Used by CM_PER_L4HS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_SHIFT 5 +#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_MASK (1 << 5) + +/* Used by CM_PER_L4HS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_SHIFT 6 +#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_MASK (1 << 6) + +/* Used by CM_PER_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_SHIFT 6 +#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_MASK (1 << 6) + +/* Used by CM_CEFUSE_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT 9 +#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK (1 << 9) + +/* Used by CM_L3_AON_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_DBGSYSCLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_DBGSYSCLK_MASK (1 << 2) + +/* Used by CM_L3_AON_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_DEBUG_CLKA_SHIFT 4 +#define AM33XX_CLKACTIVITY_DEBUG_CLKA_MASK (1 << 4) + +/* Used by CM_PER_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_EMIF_GCLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_EMIF_GCLK_MASK (1 << 2) + +/* Used by CM_GFX_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GFX_FCLK_SHIFT 9 +#define AM33XX_CLKACTIVITY_GFX_FCLK_MASK (1 << 9) + +/* Used by CM_GFX_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_MASK (1 << 8) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_MASK (1 << 8) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_SHIFT 19 +#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_MASK (1 << 19) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_SHIFT 20 +#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_MASK (1 << 20) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_SHIFT 21 +#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_MASK (1 << 21) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_SHIFT 22 +#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_MASK (1 << 22) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_SHIFT 26 +#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_MASK (1 << 26) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_SHIFT 18 +#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_MASK (1 << 18) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_I2C0_GFCLK_SHIFT 11 +#define AM33XX_CLKACTIVITY_I2C0_GFCLK_MASK (1 << 11) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_I2C_FCLK_SHIFT 24 +#define AM33XX_CLKACTIVITY_I2C_FCLK_MASK (1 << 24) + +/* Used by CM_PER_PRUSS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_SHIFT 5 +#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_MASK (1 << 5) + +/* Used by CM_PER_PRUSS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_MASK (1 << 4) + +/* Used by CM_PER_PRUSS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_SHIFT 6 +#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_MASK (1 << 6) + +/* Used by CM_PER_L3S_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L3S_GCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_L3S_GCLK_MASK (1 << 3) + +/* Used by CM_L3_AON_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L3_AON_GCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_L3_AON_GCLK_MASK (1 << 3) + +/* Used by CM_PER_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L3_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_L3_GCLK_MASK (1 << 4) + +/* Used by CM_PER_L4FW_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4FW_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4FW_GCLK_MASK (1 << 8) + +/* Used by CM_PER_L4HS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4HS_GCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_L4HS_GCLK_MASK (1 << 3) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4LS_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4LS_GCLK_MASK (1 << 8) + +/* Used by CM_GFX_L4LS_GFX_CLKSTCTRL__1 */ +#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_MASK (1 << 8) + +/* Used by CM_CEFUSE_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_MASK (1 << 8) + +/* Used by CM_RTC_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_MASK (1 << 8) + +/* Used by CM_L4_WKUP_AON_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_MASK (1 << 2) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_MASK (1 << 2) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_LCDC_GCLK_SHIFT 17 +#define AM33XX_CLKACTIVITY_LCDC_GCLK_MASK (1 << 17) + +/* Used by CM_PER_LCDC_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_MASK (1 << 4) + +/* Used by CM_PER_LCDC_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_SHIFT 5 +#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_MASK (1 << 5) + +/* Used by CM_PER_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_MCASP_GCLK_SHIFT 7 +#define AM33XX_CLKACTIVITY_MCASP_GCLK_MASK (1 << 7) + +/* Used by CM_PER_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_MMC_FCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_MMC_FCLK_MASK (1 << 3) + +/* Used by CM_MPU_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_MPU_CLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_MPU_CLK_MASK (1 << 2) + +/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_MASK (1 << 4) + +/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_SHIFT 5 +#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_MASK (1 << 5) + +/* Used by CM_RTC_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_RTC_32KCLK_SHIFT 9 +#define AM33XX_CLKACTIVITY_RTC_32KCLK_MASK (1 << 9) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_SPI_GCLK_SHIFT 25 +#define AM33XX_CLKACTIVITY_SPI_GCLK_MASK (1 << 25) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_SR_SYSCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_SR_SYSCLK_MASK (1 << 3) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER0_GCLK_SHIFT 10 +#define AM33XX_CLKACTIVITY_TIMER0_GCLK_MASK (1 << 10) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER1_GCLK_SHIFT 13 +#define AM33XX_CLKACTIVITY_TIMER1_GCLK_MASK (1 << 13) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER2_GCLK_SHIFT 14 +#define AM33XX_CLKACTIVITY_TIMER2_GCLK_MASK (1 << 14) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER3_GCLK_SHIFT 15 +#define AM33XX_CLKACTIVITY_TIMER3_GCLK_MASK (1 << 15) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER4_GCLK_SHIFT 16 +#define AM33XX_CLKACTIVITY_TIMER4_GCLK_MASK (1 << 16) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER5_GCLK_SHIFT 27 +#define AM33XX_CLKACTIVITY_TIMER5_GCLK_MASK (1 << 27) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER6_GCLK_SHIFT 28 +#define AM33XX_CLKACTIVITY_TIMER6_GCLK_MASK (1 << 28) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER7_GCLK_SHIFT 13 +#define AM33XX_CLKACTIVITY_TIMER7_GCLK_MASK (1 << 13) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_UART0_GFCLK_SHIFT 12 +#define AM33XX_CLKACTIVITY_UART0_GFCLK_MASK (1 << 12) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_UART_GFCLK_SHIFT 10 +#define AM33XX_CLKACTIVITY_UART_GFCLK_MASK (1 << 10) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_WDT0_GCLK_SHIFT 9 +#define AM33XX_CLKACTIVITY_WDT0_GCLK_MASK (1 << 9) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_WDT1_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_WDT1_GCLK_MASK (1 << 4) + +/* Used by CLKSEL_GFX_FCLK */ +#define AM33XX_CLKDIV_SEL_GFX_FCLK_SHIFT 0 +#define AM33XX_CLKDIV_SEL_GFX_FCLK_MASK (1 << 0) + +/* Used by CM_CLKOUT_CTRL */ +#define AM33XX_CLKOUT2DIV_SHIFT 3 +#define AM33XX_CLKOUT2DIV_MASK (0x05 << 3) + +/* Used by CM_CLKOUT_CTRL */ +#define AM33XX_CLKOUT2EN_SHIFT 7 +#define AM33XX_CLKOUT2EN_MASK (1 << 7) + +/* Used by CM_CLKOUT_CTRL */ +#define AM33XX_CLKOUT2SOURCE_SHIFT 0 +#define AM33XX_CLKOUT2SOURCE_MASK (0x02 << 0) + +/* + * Used by CLKSEL_GPIO0_DBCLK, CLKSEL_LCDC_PIXEL_CLK, CLKSEL_TIMER2_CLK, + * CLKSEL_TIMER3_CLK, CLKSEL_TIMER4_CLK, CLKSEL_TIMER5_CLK, CLKSEL_TIMER6_CLK, + * CLKSEL_TIMER7_CLK + */ +#define AM33XX_CLKSEL_SHIFT 0 +#define AM33XX_CLKSEL_MASK (0x01 << 0) + +/* + * Renamed from CLKSEL Used by CLKSEL_PRUSS_OCP_CLK, CLKSEL_WDT1_CLK, + * CM_CPTS_RFT_CLKSEL + */ +#define AM33XX_CLKSEL_0_0_SHIFT 0 +#define AM33XX_CLKSEL_0_0_MASK (1 << 0) + +#define AM33XX_CLKSEL_0_1_SHIFT 0 +#define AM33XX_CLKSEL_0_1_MASK (3 << 0) + +/* Renamed from CLKSEL Used by CLKSEL_TIMER1MS_CLK */ +#define AM33XX_CLKSEL_0_2_SHIFT 0 +#define AM33XX_CLKSEL_0_2_MASK (7 << 0) + +/* Used by CLKSEL_GFX_FCLK */ +#define AM33XX_CLKSEL_GFX_FCLK_SHIFT 1 +#define AM33XX_CLKSEL_GFX_FCLK_MASK (1 << 1) + +/* + * Used by CM_MPU_CLKSTCTRL, CM_RTC_CLKSTCTRL, CM_PER_CLK_24MHZ_CLKSTCTRL, + * CM_PER_CPSW_CLKSTCTRL, CM_PER_PRUSS_CLKSTCTRL, CM_PER_L3S_CLKSTCTRL, + * CM_PER_L3_CLKSTCTRL, CM_PER_L4FW_CLKSTCTRL, CM_PER_L4HS_CLKSTCTRL, + * CM_PER_L4LS_CLKSTCTRL, CM_PER_LCDC_CLKSTCTRL, CM_PER_OCPWP_L3_CLKSTCTRL, + * CM_L3_AON_CLKSTCTRL, CM_L4_WKUP_AON_CLKSTCTRL, CM_WKUP_CLKSTCTRL, + * CM_GFX_L3_CLKSTCTRL, CM_GFX_L4LS_GFX_CLKSTCTRL__1, CM_CEFUSE_CLKSTCTRL + */ +#define AM33XX_CLKTRCTRL_SHIFT 0 +#define AM33XX_CLKTRCTRL_MASK (0x3 << 0) + +/* + * Used by CM_SSC_DELTAMSTEP_DPLL_CORE, CM_SSC_DELTAMSTEP_DPLL_DDR, + * CM_SSC_DELTAMSTEP_DPLL_DISP, CM_SSC_DELTAMSTEP_DPLL_MPU, + * CM_SSC_DELTAMSTEP_DPLL_PER + */ +#define AM33XX_DELTAMSTEP_SHIFT 0 +#define AM33XX_DELTAMSTEP_MASK (0x19 << 0) + +/* Used by CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, CM_CLKSEL_DPLL_MPU */ +#define AM33XX_DPLL_BYP_CLKSEL_SHIFT 23 +#define AM33XX_DPLL_BYP_CLKSEL_MASK (1 << 23) + +/* Used by CM_CLKDCOLDO_DPLL_PER */ +#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT 8 +#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_MASK (1 << 8) + +/* Used by CM_CLKDCOLDO_DPLL_PER */ +#define AM33XX_DPLL_CLKDCOLDO_PWDN_SHIFT 12 +#define AM33XX_DPLL_CLKDCOLDO_PWDN_MASK (1 << 12) + +/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */ +#define AM33XX_DPLL_CLKOUT_DIV_SHIFT 0 +#define AM33XX_DPLL_CLKOUT_DIV_MASK (0x1f << 0) + +/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_PER */ +#define AM33XX_DPLL_CLKOUT_DIV_0_6_SHIFT 0 +#define AM33XX_DPLL_CLKOUT_DIV_0_6_MASK (0x06 << 0) + +/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */ +#define AM33XX_DPLL_CLKOUT_DIVCHACK_SHIFT 5 +#define AM33XX_DPLL_CLKOUT_DIVCHACK_MASK (1 << 5) + +/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_PER */ +#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_SHIFT 7 +#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_MASK (1 << 7) + +/* + * Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU, + * CM_DIV_M2_DPLL_PER + */ +#define AM33XX_DPLL_CLKOUT_GATE_CTRL_SHIFT 8 +#define AM33XX_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8) + +/* + * Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, + * CM_CLKSEL_DPLL_MPU + */ +#define AM33XX_DPLL_DIV_SHIFT 0 +#define AM33XX_DPLL_DIV_MASK (0x7f << 0) + +#define AM33XX_DPLL_PER_DIV_MASK (0xff << 0) + +/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_PERIPH */ +#define AM33XX_DPLL_DIV_0_7_SHIFT 0 +#define AM33XX_DPLL_DIV_0_7_MASK (0x07 << 0) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU + */ +#define AM33XX_DPLL_DRIFTGUARD_EN_SHIFT 8 +#define AM33XX_DPLL_DRIFTGUARD_EN_MASK (1 << 8) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER + */ +#define AM33XX_DPLL_EN_SHIFT 0 +#define AM33XX_DPLL_EN_MASK (0x7 << 0) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU + */ +#define AM33XX_DPLL_LPMODE_EN_SHIFT 10 +#define AM33XX_DPLL_LPMODE_EN_MASK (1 << 10) + +/* + * Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, + * CM_CLKSEL_DPLL_MPU + */ +#define AM33XX_DPLL_MULT_SHIFT 8 +#define AM33XX_DPLL_MULT_MASK (0x7ff << 8) + +/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_PERIPH */ +#define AM33XX_DPLL_MULT_PERIPH_SHIFT 8 +#define AM33XX_DPLL_MULT_PERIPH_MASK (0xfff << 8) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU + */ +#define AM33XX_DPLL_REGM4XEN_SHIFT 11 +#define AM33XX_DPLL_REGM4XEN_MASK (1 << 11) + +/* Used by CM_CLKSEL_DPLL_PERIPH */ +#define AM33XX_DPLL_SD_DIV_SHIFT 24 +#define AM33XX_DPLL_SD_DIV_MASK (24, 31) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER + */ +#define AM33XX_DPLL_SSC_ACK_SHIFT 13 +#define AM33XX_DPLL_SSC_ACK_MASK (1 << 13) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER + */ +#define AM33XX_DPLL_SSC_DOWNSPREAD_SHIFT 14 +#define AM33XX_DPLL_SSC_DOWNSPREAD_MASK (1 << 14) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER + */ +#define AM33XX_DPLL_SSC_EN_SHIFT 12 +#define AM33XX_DPLL_SSC_EN_MASK (1 << 12) + +/* Used by CM_DIV_M4_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT 0 +#define AM33XX_HSDIVIDER_CLKOUT1_DIV_MASK (0x1f << 0) + +/* Used by CM_DIV_M4_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT 5 +#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_MASK (1 << 5) + +/* Used by CM_DIV_M4_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT 8 +#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK (1 << 8) + +/* Used by CM_DIV_M4_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_SHIFT 12 +#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_MASK (1 << 12) + +/* Used by CM_DIV_M5_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT 0 +#define AM33XX_HSDIVIDER_CLKOUT2_DIV_MASK (0x1f << 0) + +/* Used by CM_DIV_M5_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT 5 +#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_MASK (1 << 5) + +/* Used by CM_DIV_M5_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT 8 +#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK (1 << 8) + +/* Used by CM_DIV_M5_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_SHIFT 12 +#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_MASK (1 << 12) + +/* Used by CM_DIV_M6_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT 0 +#define AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK (0x04 << 0) + +/* Used by CM_DIV_M6_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT 5 +#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_MASK (1 << 5) + +/* Used by CM_DIV_M6_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT 8 +#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK (1 << 8) + +/* Used by CM_DIV_M6_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_SHIFT 12 +#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_MASK (1 << 12) + +/* + * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL, + * CM_PER_AES1_CLKCTRL, CM_PER_CLKDIV32K_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL, + * CM_PER_DCAN0_CLKCTRL, CM_PER_DCAN1_CLKCTRL, CM_PER_DES_CLKCTRL, + * CM_PER_ELM_CLKCTRL, CM_PER_EMIF_CLKCTRL, CM_PER_EMIF_FW_CLKCTRL, + * CM_PER_EPWMSS0_CLKCTRL, CM_PER_EPWMSS1_CLKCTRL, CM_PER_EPWMSS2_CLKCTRL, + * CM_PER_GPIO1_CLKCTRL, CM_PER_GPIO2_CLKCTRL, CM_PER_GPIO3_CLKCTRL, + * CM_PER_GPIO4_CLKCTRL, CM_PER_GPIO5_CLKCTRL, CM_PER_GPIO6_CLKCTRL, + * CM_PER_GPMC_CLKCTRL, CM_PER_I2C1_CLKCTRL, CM_PER_I2C2_CLKCTRL, + * CM_PER_PRUSS_CLKCTRL, CM_PER_IEEE5000_CLKCTRL, CM_PER_L3_CLKCTRL, + * CM_PER_L3_INSTR_CLKCTRL, CM_PER_L4FW_CLKCTRL, CM_PER_L4HS_CLKCTRL, + * CM_PER_L4LS_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MAILBOX0_CLKCTRL, + * CM_PER_MAILBOX1_CLKCTRL, CM_PER_MCASP0_CLKCTRL, CM_PER_MCASP1_CLKCTRL, + * CM_PER_MCASP2_CLKCTRL, CM_PER_MLB_CLKCTRL, CM_PER_MMC0_CLKCTRL, + * CM_PER_MMC1_CLKCTRL, CM_PER_MMC2_CLKCTRL, CM_PER_MSTR_EXPS_CLKCTRL, + * CM_PER_OCMCRAM_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL, + * CM_PER_PKA_CLKCTRL, CM_PER_RNG_CLKCTRL, CM_PER_SHA0_CLKCTRL, + * CM_PER_SLV_EXPS_CLKCTRL, CM_PER_SPARE0_CLKCTRL, CM_PER_SPARE1_CLKCTRL, + * CM_PER_SPARE_CLKCTRL, CM_PER_SPI0_CLKCTRL, CM_PER_SPI1_CLKCTRL, + * CM_PER_SPI2_CLKCTRL, CM_PER_SPI3_CLKCTRL, CM_PER_SPINLOCK_CLKCTRL, + * CM_PER_TIMER2_CLKCTRL, CM_PER_TIMER3_CLKCTRL, CM_PER_TIMER4_CLKCTRL, + * CM_PER_TIMER5_CLKCTRL, CM_PER_TIMER6_CLKCTRL, CM_PER_TIMER7_CLKCTRL, + * CM_PER_TPCC_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL, + * CM_PER_TPTC2_CLKCTRL, CM_PER_UART1_CLKCTRL, CM_PER_UART2_CLKCTRL, + * CM_PER_UART3_CLKCTRL, CM_PER_UART4_CLKCTRL, CM_PER_UART5_CLKCTRL, + * CM_PER_USB0_CLKCTRL, CM_WKUP_ADC_TSC_CLKCTRL, CM_WKUP_CONTROL_CLKCTRL, + * CM_WKUP_DEBUGSS_CLKCTRL, CM_WKUP_GPIO0_CLKCTRL, CM_WKUP_I2C0_CLKCTRL, + * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SMARTREFLEX0_CLKCTRL, + * CM_WKUP_SMARTREFLEX1_CLKCTRL, CM_WKUP_TIMER0_CLKCTRL, + * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_UART0_CLKCTRL, CM_WKUP_WDT0_CLKCTRL, + * CM_WKUP_WDT1_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL, + * CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL + */ +#define AM33XX_IDLEST_SHIFT 16 +#define AM33XX_IDLEST_MASK (0x3 << 16) +#define AM33XX_IDLEST_VAL 0x3 + +/* Used by CM_MAC_CLKSEL */ +#define AM33XX_MII_CLK_SEL_SHIFT 2 +#define AM33XX_MII_CLK_SEL_MASK (1 << 2) + +/* + * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR, + * CM_SSC_MODFREQDIV_DPLL_DISP, CM_SSC_MODFREQDIV_DPLL_MPU, + * CM_SSC_MODFREQDIV_DPLL_PER + */ +#define AM33XX_MODFREQDIV_EXPONENT_SHIFT 8 +#define AM33XX_MODFREQDIV_EXPONENT_MASK (0x10 << 8) + +/* + * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR, + * CM_SSC_MODFREQDIV_DPLL_DISP, CM_SSC_MODFREQDIV_DPLL_MPU, + * CM_SSC_MODFREQDIV_DPLL_PER + */ +#define AM33XX_MODFREQDIV_MANTISSA_SHIFT 0 +#define AM33XX_MODFREQDIV_MANTISSA_MASK (0x06 << 0) + +/* + * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL, + * CM_PER_AES1_CLKCTRL, CM_PER_CLKDIV32K_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL, + * CM_PER_DCAN0_CLKCTRL, CM_PER_DCAN1_CLKCTRL, CM_PER_DES_CLKCTRL, + * CM_PER_ELM_CLKCTRL, CM_PER_EMIF_CLKCTRL, CM_PER_EMIF_FW_CLKCTRL, + * CM_PER_EPWMSS0_CLKCTRL, CM_PER_EPWMSS1_CLKCTRL, CM_PER_EPWMSS2_CLKCTRL, + * CM_PER_GPIO1_CLKCTRL, CM_PER_GPIO2_CLKCTRL, CM_PER_GPIO3_CLKCTRL, + * CM_PER_GPIO4_CLKCTRL, CM_PER_GPIO5_CLKCTRL, CM_PER_GPIO6_CLKCTRL, + * CM_PER_GPMC_CLKCTRL, CM_PER_I2C1_CLKCTRL, CM_PER_I2C2_CLKCTRL, + * CM_PER_PRUSS_CLKCTRL, CM_PER_IEEE5000_CLKCTRL, CM_PER_L3_CLKCTRL, + * CM_PER_L3_INSTR_CLKCTRL, CM_PER_L4FW_CLKCTRL, CM_PER_L4HS_CLKCTRL, + * CM_PER_L4LS_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MAILBOX0_CLKCTRL, + * CM_PER_MAILBOX1_CLKCTRL, CM_PER_MCASP0_CLKCTRL, CM_PER_MCASP1_CLKCTRL, + * CM_PER_MCASP2_CLKCTRL, CM_PER_MLB_CLKCTRL, CM_PER_MMC0_CLKCTRL, + * CM_PER_MMC1_CLKCTRL, CM_PER_MMC2_CLKCTRL, CM_PER_MSTR_EXPS_CLKCTRL, + * CM_PER_OCMCRAM_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL, + * CM_PER_PKA_CLKCTRL, CM_PER_RNG_CLKCTRL, CM_PER_SHA0_CLKCTRL, + * CM_PER_SLV_EXPS_CLKCTRL, CM_PER_SPARE0_CLKCTRL, CM_PER_SPARE1_CLKCTRL, + * CM_PER_SPARE_CLKCTRL, CM_PER_SPI0_CLKCTRL, CM_PER_SPI1_CLKCTRL, + * CM_PER_SPI2_CLKCTRL, CM_PER_SPI3_CLKCTRL, CM_PER_SPINLOCK_CLKCTRL, + * CM_PER_TIMER2_CLKCTRL, CM_PER_TIMER3_CLKCTRL, CM_PER_TIMER4_CLKCTRL, + * CM_PER_TIMER5_CLKCTRL, CM_PER_TIMER6_CLKCTRL, CM_PER_TIMER7_CLKCTRL, + * CM_PER_TPCC_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL, + * CM_PER_TPTC2_CLKCTRL, CM_PER_UART1_CLKCTRL, CM_PER_UART2_CLKCTRL, + * CM_PER_UART3_CLKCTRL, CM_PER_UART4_CLKCTRL, CM_PER_UART5_CLKCTRL, + * CM_PER_USB0_CLKCTRL, CM_WKUP_ADC_TSC_CLKCTRL, CM_WKUP_CONTROL_CLKCTRL, + * CM_WKUP_DEBUGSS_CLKCTRL, CM_WKUP_GPIO0_CLKCTRL, CM_WKUP_I2C0_CLKCTRL, + * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SMARTREFLEX0_CLKCTRL, + * CM_WKUP_SMARTREFLEX1_CLKCTRL, CM_WKUP_TIMER0_CLKCTRL, + * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_UART0_CLKCTRL, CM_WKUP_WDT0_CLKCTRL, + * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, + * CM_GFX_GFX_CLKCTRL, CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL, + * CM_CEFUSE_CEFUSE_CLKCTRL + */ +#define AM33XX_MODULEMODE_SHIFT 0 +#define AM33XX_MODULEMODE_MASK (0x3 << 0) + +/* Used by CM_WKUP_DEBUGSS_CLKCTRL */ +#define AM33XX_OPTCLK_DEBUG_CLKA_SHIFT 30 +#define AM33XX_OPTCLK_DEBUG_CLKA_MASK (1 << 30) + +/* Used by CM_WKUP_DEBUGSS_CLKCTRL */ +#define AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT 19 +#define AM33XX_OPTFCLKEN_DBGSYSCLK_MASK (1 << 19) + +/* Used by CM_WKUP_GPIO0_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_MASK (1 << 18) + +/* Used by CM_PER_GPIO1_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_MASK (1 << 18) + +/* Used by CM_PER_GPIO2_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_MASK (1 << 18) + +/* Used by CM_PER_GPIO3_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_MASK (1 << 18) + +/* Used by CM_PER_GPIO4_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_MASK (1 << 18) + +/* Used by CM_PER_GPIO5_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_MASK (1 << 18) + +/* Used by CM_PER_GPIO6_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_MASK (1 << 18) + +/* + * Used by CM_MPU_MPU_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL, CM_PER_PRUSS_CLKCTRL, + * CM_PER_IEEE5000_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MLB_CLKCTRL, + * CM_PER_MSTR_EXPS_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL, + * CM_PER_SPARE_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL, + * CM_PER_TPTC2_CLKCTRL, CM_PER_USB0_CLKCTRL, CM_WKUP_DEBUGSS_CLKCTRL, + * CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL + */ +#define AM33XX_STBYST_SHIFT 18 +#define AM33XX_STBYST_MASK (1 << 18) + +/* Used by CM_WKUP_DEBUGSS_CLKCTRL */ +#define AM33XX_STM_PMD_CLKDIVSEL_SHIFT 27 +#define AM33XX_STM_PMD_CLKDIVSEL_MASK (0x29 << 27) + +/* Used by CM_WKUP_DEBUGSS_CLKCTRL */ +#define AM33XX_STM_PMD_CLKSEL_SHIFT 22 +#define AM33XX_STM_PMD_CLKSEL_MASK (0x23 << 22) + +/* + * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP, + * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER + */ +#define AM33XX_ST_DPLL_CLK_SHIFT 0 +#define AM33XX_ST_DPLL_CLK_MASK (1 << 0) + +/* Used by CM_CLKDCOLDO_DPLL_PER */ +#define AM33XX_ST_DPLL_CLKDCOLDO_SHIFT 8 +#define AM33XX_ST_DPLL_CLKDCOLDO_MASK (1 << 8) + +/* + * Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU, + * CM_DIV_M2_DPLL_PER + */ +#define AM33XX_ST_DPLL_CLKOUT_SHIFT 9 +#define AM33XX_ST_DPLL_CLKOUT_MASK (1 << 9) + +/* Used by CM_DIV_M4_DPLL_CORE */ +#define AM33XX_ST_HSDIVIDER_CLKOUT1_SHIFT 9 +#define AM33XX_ST_HSDIVIDER_CLKOUT1_MASK (1 << 9) + +/* Used by CM_DIV_M5_DPLL_CORE */ +#define AM33XX_ST_HSDIVIDER_CLKOUT2_SHIFT 9 +#define AM33XX_ST_HSDIVIDER_CLKOUT2_MASK (1 << 9) + +/* Used by CM_DIV_M6_DPLL_CORE */ +#define AM33XX_ST_HSDIVIDER_CLKOUT3_SHIFT 9 +#define AM33XX_ST_HSDIVIDER_CLKOUT3_MASK (1 << 9) + +/* + * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP, + * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER + */ +#define AM33XX_ST_MN_BYPASS_SHIFT 8 +#define AM33XX_ST_MN_BYPASS_MASK (1 << 8) + +/* Used by CM_WKUP_DEBUGSS_CLKCTRL */ +#define AM33XX_TRC_PMD_CLKDIVSEL_SHIFT 24 +#define AM33XX_TRC_PMD_CLKDIVSEL_MASK (0x26 << 24) + +/* Used by CM_WKUP_DEBUGSS_CLKCTRL */ +#define AM33XX_TRC_PMD_CLKSEL_SHIFT 20 +#define AM33XX_TRC_PMD_CLKSEL_MASK (0x21 << 20) + +/* Used by CONTROL_SEC_CLK_CTRL */ +#define AM33XX_TIMER0_CLKSEL_MASK (0x3 << 4) +#endif diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 8083a8cdc55..766338fe4d3 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -169,8 +169,6 @@ /* AM35XX specific CM_ICLKEN1_CORE bits */ #define AM35XX_EN_IPSS_MASK (1 << 4) #define AM35XX_EN_IPSS_SHIFT 4 -#define AM35XX_EN_UART4_MASK (1 << 23) -#define AM35XX_EN_UART4_SHIFT 23 /* CM_ICLKEN2_CORE */ #define OMAP3430_EN_PKA_MASK (1 << 4) @@ -207,6 +205,8 @@ #define OMAP3430_ST_DES2_MASK (1 << 26) #define OMAP3430_ST_MSPRO_SHIFT 23 #define OMAP3430_ST_MSPRO_MASK (1 << 23) +#define AM35XX_ST_UART4_SHIFT 23 +#define AM35XX_ST_UART4_MASK (1 << 23) #define OMAP3430_ST_HDQ_SHIFT 22 #define OMAP3430_ST_HDQ_MASK (1 << 22) #define OMAP3430ES1_ST_FAC_SHIFT 8 diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c new file mode 100644 index 00000000000..13f56eafef0 --- /dev/null +++ b/arch/arm/mach-omap2/cm33xx.c @@ -0,0 +1,313 @@ +/* + * AM33XX CM functions + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * Reference taken from from OMAP4 cminst44xx.c + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <plat/common.h> + +#include "cm.h" +#include "cm33xx.h" +#include "cm-regbits-34xx.h" +#include "cm-regbits-33xx.h" +#include "prm33xx.h" + +/* + * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield: + * + * 0x0 func: Module is fully functional, including OCP + * 0x1 trans: Module is performing transition: wakeup, or sleep, or sleep + * abortion + * 0x2 idle: Module is in Idle mode (only OCP part). It is functional if + * using separate functional clock + * 0x3 disabled: Module is disabled and cannot be accessed + * + */ +#define CLKCTRL_IDLEST_FUNCTIONAL 0x0 +#define CLKCTRL_IDLEST_INTRANSITION 0x1 +#define CLKCTRL_IDLEST_INTERFACE_IDLE 0x2 +#define CLKCTRL_IDLEST_DISABLED 0x3 + +/* Private functions */ + +/* Read a register in a CM instance */ +static inline u32 am33xx_cm_read_reg(s16 inst, u16 idx) +{ + return __raw_readl(cm_base + inst + idx); +} + +/* Write into a register in a CM */ +static inline void am33xx_cm_write_reg(u32 val, s16 inst, u16 idx) +{ + __raw_writel(val, cm_base + inst + idx); +} + +/* Read-modify-write a register in CM */ +static inline u32 am33xx_cm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx) +{ + u32 v; + + v = am33xx_cm_read_reg(inst, idx); + v &= ~mask; + v |= bits; + am33xx_cm_write_reg(v, inst, idx); + + return v; +} + +static inline u32 am33xx_cm_set_reg_bits(u32 bits, s16 inst, s16 idx) +{ + return am33xx_cm_rmw_reg_bits(bits, bits, inst, idx); +} + +static inline u32 am33xx_cm_clear_reg_bits(u32 bits, s16 inst, s16 idx) +{ + return am33xx_cm_rmw_reg_bits(bits, 0x0, inst, idx); +} + +static inline u32 am33xx_cm_read_reg_bits(u16 inst, s16 idx, u32 mask) +{ + u32 v; + + v = am33xx_cm_read_reg(inst, idx); + v &= mask; + v >>= __ffs(mask); + + return v; +} + +/** + * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to + * bit 0. + */ +static u32 _clkctrl_idlest(u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + u32 v = am33xx_cm_read_reg(inst, clkctrl_offs); + v &= AM33XX_IDLEST_MASK; + v >>= AM33XX_IDLEST_SHIFT; + return v; +} + +/** + * _is_module_ready - can module registers be accessed without causing an abort? + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either + * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise. + */ +static bool _is_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + u32 v; + + v = _clkctrl_idlest(inst, cdoffs, clkctrl_offs); + + return (v == CLKCTRL_IDLEST_FUNCTIONAL || + v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false; +} + +/** + * _clktrctrl_write - write @c to a CM_CLKSTCTRL.CLKTRCTRL register bitfield + * @c: CLKTRCTRL register bitfield (LSB = bit 0, i.e., unshifted) + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * + * @c must be the unshifted value for CLKTRCTRL - i.e., this function + * will handle the shift itself. + */ +static void _clktrctrl_write(u8 c, s16 inst, u16 cdoffs) +{ + u32 v; + + v = am33xx_cm_read_reg(inst, cdoffs); + v &= ~AM33XX_CLKTRCTRL_MASK; + v |= c << AM33XX_CLKTRCTRL_SHIFT; + am33xx_cm_write_reg(v, inst, cdoffs); +} + +/* Public functions */ + +/** + * am33xx_cm_is_clkdm_in_hwsup - is a clockdomain in hwsup idle mode? + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * + * Returns true if the clockdomain referred to by (@inst, @cdoffs) + * is in hardware-supervised idle mode, or 0 otherwise. + */ +bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs) +{ + u32 v; + + v = am33xx_cm_read_reg(inst, cdoffs); + v &= AM33XX_CLKTRCTRL_MASK; + v >>= AM33XX_CLKTRCTRL_SHIFT; + + return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? true : false; +} + +/** + * am33xx_cm_clkdm_enable_hwsup - put a clockdomain in hwsup-idle mode + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * + * Put a clockdomain referred to by (@inst, @cdoffs) into + * hardware-supervised idle mode. No return value. + */ +void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs) +{ + _clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, inst, cdoffs); +} + +/** + * am33xx_cm_clkdm_disable_hwsup - put a clockdomain in swsup-idle mode + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * + * Put a clockdomain referred to by (@inst, @cdoffs) into + * software-supervised idle mode, i.e., controlled manually by the + * Linux OMAP clockdomain code. No return value. + */ +void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs) +{ + _clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, inst, cdoffs); +} + +/** + * am33xx_cm_clkdm_force_sleep - try to put a clockdomain into idle + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * + * Put a clockdomain referred to by (@inst, @cdoffs) into idle + * No return value. + */ +void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs) +{ + _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, inst, cdoffs); +} + +/** + * am33xx_cm_clkdm_force_wakeup - try to take a clockdomain out of idle + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * + * Take a clockdomain referred to by (@inst, @cdoffs) out of idle, + * waking it up. No return value. + */ +void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs) +{ + _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, inst, cdoffs); +} + +/* + * + */ + +/** + * am33xx_cm_wait_module_ready - wait for a module to be in 'func' state + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * Wait for the module IDLEST to be functional. If the idle state is in any + * the non functional state (trans, idle or disabled), module and thus the + * sysconfig cannot be accessed and will probably lead to an "imprecise + * external abort" + */ +int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + int i = 0; + + if (!clkctrl_offs) + return 0; + + omap_test_timeout(_is_module_ready(inst, cdoffs, clkctrl_offs), + MAX_MODULE_READY_TIME, i); + + return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; +} + +/** + * am33xx_cm_wait_module_idle - wait for a module to be in 'disabled' + * state + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * Wait for the module IDLEST to be disabled. Some PRCM transition, + * like reset assertion or parent clock de-activation must wait the + * module to be fully disabled. + */ +int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + int i = 0; + + if (!clkctrl_offs) + return 0; + + omap_test_timeout((_clkctrl_idlest(inst, cdoffs, clkctrl_offs) == + CLKCTRL_IDLEST_DISABLED), + MAX_MODULE_READY_TIME, i); + + return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; +} + +/** + * am33xx_cm_module_enable - Enable the modulemode inside CLKCTRL + * @mode: Module mode (SW or HW) + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * No return value. + */ +void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + u32 v; + + v = am33xx_cm_read_reg(inst, clkctrl_offs); + v &= ~AM33XX_MODULEMODE_MASK; + v |= mode << AM33XX_MODULEMODE_SHIFT; + am33xx_cm_write_reg(v, inst, clkctrl_offs); +} + +/** + * am33xx_cm_module_disable - Disable the module inside CLKCTRL + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * No return value. + */ +void am33xx_cm_module_disable(u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + u32 v; + + v = am33xx_cm_read_reg(inst, clkctrl_offs); + v &= ~AM33XX_MODULEMODE_MASK; + am33xx_cm_write_reg(v, inst, clkctrl_offs); +} diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h new file mode 100644 index 00000000000..5fa0b62e1a7 --- /dev/null +++ b/arch/arm/mach-omap2/cm33xx.h @@ -0,0 +1,420 @@ +/* + * AM33XX CM offset macros + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CM_33XX_H +#define __ARCH_ARM_MACH_OMAP2_CM_33XX_H + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> + +#include "common.h" + +#include "cm.h" +#include "cm-regbits-33xx.h" +#include "cm33xx.h" + +/* CM base address */ +#define AM33XX_CM_BASE 0x44e00000 + +#define AM33XX_CM_REGADDR(inst, reg) \ + AM33XX_L4_WK_IO_ADDRESS(AM33XX_CM_BASE + (inst) + (reg)) + +/* CM instances */ +#define AM33XX_CM_PER_MOD 0x0000 +#define AM33XX_CM_WKUP_MOD 0x0400 +#define AM33XX_CM_DPLL_MOD 0x0500 +#define AM33XX_CM_MPU_MOD 0x0600 +#define AM33XX_CM_DEVICE_MOD 0x0700 +#define AM33XX_CM_RTC_MOD 0x0800 +#define AM33XX_CM_GFX_MOD 0x0900 +#define AM33XX_CM_CEFUSE_MOD 0x0A00 + +/* CM */ + +/* CM.PER_CM register offsets */ +#define AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET 0x0000 +#define AM33XX_CM_PER_L4LS_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0000) +#define AM33XX_CM_PER_L3S_CLKSTCTRL_OFFSET 0x0004 +#define AM33XX_CM_PER_L3S_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0004) +#define AM33XX_CM_PER_L4FW_CLKSTCTRL_OFFSET 0x0008 +#define AM33XX_CM_PER_L4FW_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0008) +#define AM33XX_CM_PER_L3_CLKSTCTRL_OFFSET 0x000c +#define AM33XX_CM_PER_L3_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x000c) +#define AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET 0x0014 +#define AM33XX_CM_PER_CPGMAC0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0014) +#define AM33XX_CM_PER_LCDC_CLKCTRL_OFFSET 0x0018 +#define AM33XX_CM_PER_LCDC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0018) +#define AM33XX_CM_PER_USB0_CLKCTRL_OFFSET 0x001c +#define AM33XX_CM_PER_USB0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x001c) +#define AM33XX_CM_PER_MLB_CLKCTRL_OFFSET 0x0020 +#define AM33XX_CM_PER_MLB_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0020) +#define AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET 0x0024 +#define AM33XX_CM_PER_TPTC0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0024) +#define AM33XX_CM_PER_EMIF_CLKCTRL_OFFSET 0x0028 +#define AM33XX_CM_PER_EMIF_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0028) +#define AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET 0x002c +#define AM33XX_CM_PER_OCMCRAM_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x002c) +#define AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET 0x0030 +#define AM33XX_CM_PER_GPMC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0030) +#define AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET 0x0034 +#define AM33XX_CM_PER_MCASP0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0034) +#define AM33XX_CM_PER_UART5_CLKCTRL_OFFSET 0x0038 +#define AM33XX_CM_PER_UART5_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0038) +#define AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET 0x003c +#define AM33XX_CM_PER_MMC0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x003c) +#define AM33XX_CM_PER_ELM_CLKCTRL_OFFSET 0x0040 +#define AM33XX_CM_PER_ELM_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0040) +#define AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET 0x0044 +#define AM33XX_CM_PER_I2C2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0044) +#define AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET 0x0048 +#define AM33XX_CM_PER_I2C1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0048) +#define AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET 0x004c +#define AM33XX_CM_PER_SPI0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x004c) +#define AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET 0x0050 +#define AM33XX_CM_PER_SPI1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0050) +#define AM33XX_CM_PER_SPI2_CLKCTRL_OFFSET 0x0054 +#define AM33XX_CM_PER_SPI2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0054) +#define AM33XX_CM_PER_SPI3_CLKCTRL_OFFSET 0x0058 +#define AM33XX_CM_PER_SPI3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0058) +#define AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET 0x0060 +#define AM33XX_CM_PER_L4LS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0060) +#define AM33XX_CM_PER_L4FW_CLKCTRL_OFFSET 0x0064 +#define AM33XX_CM_PER_L4FW_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0064) +#define AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET 0x0068 +#define AM33XX_CM_PER_MCASP1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0068) +#define AM33XX_CM_PER_UART1_CLKCTRL_OFFSET 0x006c +#define AM33XX_CM_PER_UART1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x006c) +#define AM33XX_CM_PER_UART2_CLKCTRL_OFFSET 0x0070 +#define AM33XX_CM_PER_UART2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0070) +#define AM33XX_CM_PER_UART3_CLKCTRL_OFFSET 0x0074 +#define AM33XX_CM_PER_UART3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0074) +#define AM33XX_CM_PER_UART4_CLKCTRL_OFFSET 0x0078 +#define AM33XX_CM_PER_UART4_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0078) +#define AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET 0x007c +#define AM33XX_CM_PER_TIMER7_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x007c) +#define AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET 0x0080 +#define AM33XX_CM_PER_TIMER2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0080) +#define AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET 0x0084 +#define AM33XX_CM_PER_TIMER3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0084) +#define AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET 0x0088 +#define AM33XX_CM_PER_TIMER4_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0088) +#define AM33XX_CM_PER_MCASP2_CLKCTRL_OFFSET 0x008c +#define AM33XX_CM_PER_MCASP2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x008c) +#define AM33XX_CM_PER_RNG_CLKCTRL_OFFSET 0x0090 +#define AM33XX_CM_PER_RNG_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0090) +#define AM33XX_CM_PER_AES0_CLKCTRL_OFFSET 0x0094 +#define AM33XX_CM_PER_AES0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0094) +#define AM33XX_CM_PER_AES1_CLKCTRL_OFFSET 0x0098 +#define AM33XX_CM_PER_AES1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0098) +#define AM33XX_CM_PER_DES_CLKCTRL_OFFSET 0x009c +#define AM33XX_CM_PER_DES_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x009c) +#define AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET 0x00a0 +#define AM33XX_CM_PER_SHA0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a0) +#define AM33XX_CM_PER_PKA_CLKCTRL_OFFSET 0x00a4 +#define AM33XX_CM_PER_PKA_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a4) +#define AM33XX_CM_PER_GPIO6_CLKCTRL_OFFSET 0x00a8 +#define AM33XX_CM_PER_GPIO6_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a8) +#define AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET 0x00ac +#define AM33XX_CM_PER_GPIO1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00ac) +#define AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET 0x00b0 +#define AM33XX_CM_PER_GPIO2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b0) +#define AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET 0x00b4 +#define AM33XX_CM_PER_GPIO3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b4) +#define AM33XX_CM_PER_GPIO4_CLKCTRL_OFFSET 0x00b8 +#define AM33XX_CM_PER_GPIO4_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b8) +#define AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET 0x00bc +#define AM33XX_CM_PER_TPCC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00bc) +#define AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET 0x00c0 +#define AM33XX_CM_PER_DCAN0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00c0) +#define AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET 0x00c4 +#define AM33XX_CM_PER_DCAN1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00c4) +#define AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET 0x00cc +#define AM33XX_CM_PER_EPWMSS1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00cc) +#define AM33XX_CM_PER_EMIF_FW_CLKCTRL_OFFSET 0x00d0 +#define AM33XX_CM_PER_EMIF_FW_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d0) +#define AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET 0x00d4 +#define AM33XX_CM_PER_EPWMSS0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d4) +#define AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET 0x00d8 +#define AM33XX_CM_PER_EPWMSS2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d8) +#define AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET 0x00dc +#define AM33XX_CM_PER_L3_INSTR_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00dc) +#define AM33XX_CM_PER_L3_CLKCTRL_OFFSET 0x00e0 +#define AM33XX_CM_PER_L3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e0) +#define AM33XX_CM_PER_IEEE5000_CLKCTRL_OFFSET 0x00e4 +#define AM33XX_CM_PER_IEEE5000_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e4) +#define AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET 0x00e8 +#define AM33XX_CM_PER_PRUSS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e8) +#define AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET 0x00ec +#define AM33XX_CM_PER_TIMER5_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00ec) +#define AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET 0x00f0 +#define AM33XX_CM_PER_TIMER6_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f0) +#define AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET 0x00f4 +#define AM33XX_CM_PER_MMC1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f4) +#define AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET 0x00f8 +#define AM33XX_CM_PER_MMC2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f8) +#define AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET 0x00fc +#define AM33XX_CM_PER_TPTC1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00fc) +#define AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET 0x0100 +#define AM33XX_CM_PER_TPTC2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0100) +#define AM33XX_CM_PER_GPIO5_CLKCTRL_OFFSET 0x0104 +#define AM33XX_CM_PER_GPIO5_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0104) +#define AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET 0x010c +#define AM33XX_CM_PER_SPINLOCK_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x010c) +#define AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET 0x0110 +#define AM33XX_CM_PER_MAILBOX0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0110) +#define AM33XX_CM_PER_L4HS_CLKSTCTRL_OFFSET 0x011c +#define AM33XX_CM_PER_L4HS_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x011c) +#define AM33XX_CM_PER_L4HS_CLKCTRL_OFFSET 0x0120 +#define AM33XX_CM_PER_L4HS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0120) +#define AM33XX_CM_PER_MSTR_EXPS_CLKCTRL_OFFSET 0x0124 +#define AM33XX_CM_PER_MSTR_EXPS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0124) +#define AM33XX_CM_PER_SLV_EXPS_CLKCTRL_OFFSET 0x0128 +#define AM33XX_CM_PER_SLV_EXPS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0128) +#define AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL_OFFSET 0x012c +#define AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x012c) +#define AM33XX_CM_PER_OCPWP_CLKCTRL_OFFSET 0x0130 +#define AM33XX_CM_PER_OCPWP_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0130) +#define AM33XX_CM_PER_MAILBOX1_CLKCTRL_OFFSET 0x0134 +#define AM33XX_CM_PER_MAILBOX1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0134) +#define AM33XX_CM_PER_PRUSS_CLKSTCTRL_OFFSET 0x0140 +#define AM33XX_CM_PER_PRUSS_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0140) +#define AM33XX_CM_PER_CPSW_CLKSTCTRL_OFFSET 0x0144 +#define AM33XX_CM_PER_CPSW_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0144) +#define AM33XX_CM_PER_LCDC_CLKSTCTRL_OFFSET 0x0148 +#define AM33XX_CM_PER_LCDC_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0148) +#define AM33XX_CM_PER_CLKDIV32K_CLKCTRL_OFFSET 0x014c +#define AM33XX_CM_PER_CLKDIV32K_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x014c) +#define AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL_OFFSET 0x0150 +#define AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0150) + +/* CM.WKUP_CM register offsets */ +#define AM33XX_CM_WKUP_CLKSTCTRL_OFFSET 0x0000 +#define AM33XX_CM_WKUP_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0000) +#define AM33XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET 0x0004 +#define AM33XX_CM_WKUP_CONTROL_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0004) +#define AM33XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET 0x0008 +#define AM33XX_CM_WKUP_GPIO0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0008) +#define AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET 0x000c +#define AM33XX_CM_WKUP_L4WKUP_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x000c) +#define AM33XX_CM_WKUP_TIMER0_CLKCTRL_OFFSET 0x0010 +#define AM33XX_CM_WKUP_TIMER0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0010) +#define AM33XX_CM_WKUP_DEBUGSS_CLKCTRL_OFFSET 0x0014 +#define AM33XX_CM_WKUP_DEBUGSS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0014) +#define AM33XX_CM_L3_AON_CLKSTCTRL_OFFSET 0x0018 +#define AM33XX_CM_L3_AON_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0018) +#define AM33XX_CM_AUTOIDLE_DPLL_MPU_OFFSET 0x001c +#define AM33XX_CM_AUTOIDLE_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x001c) +#define AM33XX_CM_IDLEST_DPLL_MPU_OFFSET 0x0020 +#define AM33XX_CM_IDLEST_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0020) +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET 0x0024 +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0024) +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET 0x0028 +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0028) +#define AM33XX_CM_CLKSEL_DPLL_MPU_OFFSET 0x002c +#define AM33XX_CM_CLKSEL_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x002c) +#define AM33XX_CM_AUTOIDLE_DPLL_DDR_OFFSET 0x0030 +#define AM33XX_CM_AUTOIDLE_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0030) +#define AM33XX_CM_IDLEST_DPLL_DDR_OFFSET 0x0034 +#define AM33XX_CM_IDLEST_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0034) +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DDR_OFFSET 0x0038 +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0038) +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DDR_OFFSET 0x003c +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x003c) +#define AM33XX_CM_CLKSEL_DPLL_DDR_OFFSET 0x0040 +#define AM33XX_CM_CLKSEL_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0040) +#define AM33XX_CM_AUTOIDLE_DPLL_DISP_OFFSET 0x0044 +#define AM33XX_CM_AUTOIDLE_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0044) +#define AM33XX_CM_IDLEST_DPLL_DISP_OFFSET 0x0048 +#define AM33XX_CM_IDLEST_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0048) +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DISP_OFFSET 0x004c +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x004c) +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DISP_OFFSET 0x0050 +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0050) +#define AM33XX_CM_CLKSEL_DPLL_DISP_OFFSET 0x0054 +#define AM33XX_CM_CLKSEL_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0054) +#define AM33XX_CM_AUTOIDLE_DPLL_CORE_OFFSET 0x0058 +#define AM33XX_CM_AUTOIDLE_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0058) +#define AM33XX_CM_IDLEST_DPLL_CORE_OFFSET 0x005c +#define AM33XX_CM_IDLEST_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x005c) +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET 0x0060 +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0060) +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET 0x0064 +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0064) +#define AM33XX_CM_CLKSEL_DPLL_CORE_OFFSET 0x0068 +#define AM33XX_CM_CLKSEL_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0068) +#define AM33XX_CM_AUTOIDLE_DPLL_PER_OFFSET 0x006c +#define AM33XX_CM_AUTOIDLE_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x006c) +#define AM33XX_CM_IDLEST_DPLL_PER_OFFSET 0x0070 +#define AM33XX_CM_IDLEST_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0070) +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET 0x0074 +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0074) +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET 0x0078 +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0078) +#define AM33XX_CM_CLKDCOLDO_DPLL_PER_OFFSET 0x007c +#define AM33XX_CM_CLKDCOLDO_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x007c) +#define AM33XX_CM_DIV_M4_DPLL_CORE_OFFSET 0x0080 +#define AM33XX_CM_DIV_M4_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0080) +#define AM33XX_CM_DIV_M5_DPLL_CORE_OFFSET 0x0084 +#define AM33XX_CM_DIV_M5_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0084) +#define AM33XX_CM_CLKMODE_DPLL_MPU_OFFSET 0x0088 +#define AM33XX_CM_CLKMODE_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0088) +#define AM33XX_CM_CLKMODE_DPLL_PER_OFFSET 0x008c +#define AM33XX_CM_CLKMODE_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x008c) +#define AM33XX_CM_CLKMODE_DPLL_CORE_OFFSET 0x0090 +#define AM33XX_CM_CLKMODE_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0090) +#define AM33XX_CM_CLKMODE_DPLL_DDR_OFFSET 0x0094 +#define AM33XX_CM_CLKMODE_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0094) +#define AM33XX_CM_CLKMODE_DPLL_DISP_OFFSET 0x0098 +#define AM33XX_CM_CLKMODE_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0098) +#define AM33XX_CM_CLKSEL_DPLL_PERIPH_OFFSET 0x009c +#define AM33XX_CM_CLKSEL_DPLL_PERIPH AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x009c) +#define AM33XX_CM_DIV_M2_DPLL_DDR_OFFSET 0x00a0 +#define AM33XX_CM_DIV_M2_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a0) +#define AM33XX_CM_DIV_M2_DPLL_DISP_OFFSET 0x00a4 +#define AM33XX_CM_DIV_M2_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a4) +#define AM33XX_CM_DIV_M2_DPLL_MPU_OFFSET 0x00a8 +#define AM33XX_CM_DIV_M2_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a8) +#define AM33XX_CM_DIV_M2_DPLL_PER_OFFSET 0x00ac +#define AM33XX_CM_DIV_M2_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00ac) +#define AM33XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET 0x00b0 +#define AM33XX_CM_WKUP_WKUP_M3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b0) +#define AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET 0x00b4 +#define AM33XX_CM_WKUP_UART0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b4) +#define AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET 0x00b8 +#define AM33XX_CM_WKUP_I2C0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b8) +#define AM33XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET 0x00bc +#define AM33XX_CM_WKUP_ADC_TSC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00bc) +#define AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET 0x00c0 +#define AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c0) +#define AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET 0x00c4 +#define AM33XX_CM_WKUP_TIMER1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c4) +#define AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET 0x00c8 +#define AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c8) +#define AM33XX_CM_L4_WKUP_AON_CLKSTCTRL_OFFSET 0x00cc +#define AM33XX_CM_L4_WKUP_AON_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00cc) +#define AM33XX_CM_WKUP_WDT0_CLKCTRL_OFFSET 0x00d0 +#define AM33XX_CM_WKUP_WDT0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d0) +#define AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET 0x00d4 +#define AM33XX_CM_WKUP_WDT1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d4) +#define AM33XX_CM_DIV_M6_DPLL_CORE_OFFSET 0x00d8 +#define AM33XX_CM_DIV_M6_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d8) + +/* CM.DPLL_CM register offsets */ +#define AM33XX_CLKSEL_TIMER7_CLK_OFFSET 0x0004 +#define AM33XX_CLKSEL_TIMER7_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0004) +#define AM33XX_CLKSEL_TIMER2_CLK_OFFSET 0x0008 +#define AM33XX_CLKSEL_TIMER2_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0008) +#define AM33XX_CLKSEL_TIMER3_CLK_OFFSET 0x000c +#define AM33XX_CLKSEL_TIMER3_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x000c) +#define AM33XX_CLKSEL_TIMER4_CLK_OFFSET 0x0010 +#define AM33XX_CLKSEL_TIMER4_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0010) +#define AM33XX_CM_MAC_CLKSEL_OFFSET 0x0014 +#define AM33XX_CM_MAC_CLKSEL AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0014) +#define AM33XX_CLKSEL_TIMER5_CLK_OFFSET 0x0018 +#define AM33XX_CLKSEL_TIMER5_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0018) +#define AM33XX_CLKSEL_TIMER6_CLK_OFFSET 0x001c +#define AM33XX_CLKSEL_TIMER6_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x001c) +#define AM33XX_CM_CPTS_RFT_CLKSEL_OFFSET 0x0020 +#define AM33XX_CM_CPTS_RFT_CLKSEL AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0020) +#define AM33XX_CLKSEL_TIMER1MS_CLK_OFFSET 0x0028 +#define AM33XX_CLKSEL_TIMER1MS_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0028) +#define AM33XX_CLKSEL_GFX_FCLK_OFFSET 0x002c +#define AM33XX_CLKSEL_GFX_FCLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x002c) +#define AM33XX_CLKSEL_PRUSS_OCP_CLK_OFFSET 0x0030 +#define AM33XX_CLKSEL_PRUSS_OCP_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0030) +#define AM33XX_CLKSEL_LCDC_PIXEL_CLK_OFFSET 0x0034 +#define AM33XX_CLKSEL_LCDC_PIXEL_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0034) +#define AM33XX_CLKSEL_WDT1_CLK_OFFSET 0x0038 +#define AM33XX_CLKSEL_WDT1_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0038) +#define AM33XX_CLKSEL_GPIO0_DBCLK_OFFSET 0x003c +#define AM33XX_CLKSEL_GPIO0_DBCLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x003c) + +/* CM.MPU_CM register offsets */ +#define AM33XX_CM_MPU_CLKSTCTRL_OFFSET 0x0000 +#define AM33XX_CM_MPU_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_MPU_MOD, 0x0000) +#define AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET 0x0004 +#define AM33XX_CM_MPU_MPU_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_MPU_MOD, 0x0004) + +/* CM.DEVICE_CM register offsets */ +#define AM33XX_CM_CLKOUT_CTRL_OFFSET 0x0000 +#define AM33XX_CM_CLKOUT_CTRL AM33XX_CM_REGADDR(AM33XX_CM_DEVICE_MOD, 0x0000) + +/* CM.RTC_CM register offsets */ +#define AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET 0x0000 +#define AM33XX_CM_RTC_RTC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_RTC_MOD, 0x0000) +#define AM33XX_CM_RTC_CLKSTCTRL_OFFSET 0x0004 +#define AM33XX_CM_RTC_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_RTC_MOD, 0x0004) + +/* CM.GFX_CM register offsets */ +#define AM33XX_CM_GFX_L3_CLKSTCTRL_OFFSET 0x0000 +#define AM33XX_CM_GFX_L3_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0000) +#define AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET 0x0004 +#define AM33XX_CM_GFX_GFX_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0004) +#define AM33XX_CM_GFX_BITBLT_CLKCTRL_OFFSET 0x0008 +#define AM33XX_CM_GFX_BITBLT_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0008) +#define AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1_OFFSET 0x000c +#define AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1 AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x000c) +#define AM33XX_CM_GFX_MMUCFG_CLKCTRL_OFFSET 0x0010 +#define AM33XX_CM_GFX_MMUCFG_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0010) +#define AM33XX_CM_GFX_MMUDATA_CLKCTRL_OFFSET 0x0014 +#define AM33XX_CM_GFX_MMUDATA_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0014) + +/* CM.CEFUSE_CM register offsets */ +#define AM33XX_CM_CEFUSE_CLKSTCTRL_OFFSET 0x0000 +#define AM33XX_CM_CEFUSE_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_CEFUSE_MOD, 0x0000) +#define AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET 0x0020 +#define AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_CEFUSE_MOD, 0x0020) + + +extern bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs); +extern void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs); +extern void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs); +extern void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs); +extern void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs); + +#ifdef CONFIG_SOC_AM33XX +extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, + u16 clkctrl_offs); +extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, + u16 clkctrl_offs); +extern void am33xx_cm_module_disable(u16 inst, s16 cdoffs, + u16 clkctrl_offs); +extern int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, + u16 clkctrl_offs); +#else +static inline int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ + return 0; +} +static inline void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ +} +static inline void am33xx_cm_module_disable(u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ +} +static inline int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ + return 0; +} +#endif + +#endif diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 1a39945d9ff..1894015ff04 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -235,20 +235,6 @@ void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs) } /** - * omap4_cminst_clkdm_force_sleep - try to put a clockdomain into idle - * @part: PRCM partition ID that the clockdomain registers exist in - * @inst: CM instance register offset (*_INST macro) - * @cdoffs: Clockdomain register offset (*_CDOFFS macro) - * - * Put a clockdomain referred to by (@part, @inst, @cdoffs) into idle - * No return value. - */ -void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs) -{ - _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, part, inst, cdoffs); -} - -/** * omap4_cminst_clkdm_force_sleep - try to take a clockdomain out of idle * @part: PRCM partition ID that the clockdomain registers exist in * @inst: CM instance register offset (*_INST macro) diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h index a018a732787..d69fdefef98 100644 --- a/arch/arm/mach-omap2/cminst44xx.h +++ b/arch/arm/mach-omap2/cminst44xx.h @@ -16,38 +16,13 @@ extern void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs); extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs); extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs); extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs); - extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); - -# ifdef CONFIG_ARCH_OMAP4 extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); - extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); - -# else - -static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, - u16 clkctrl_offs) -{ - return 0; -} - -static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, - s16 cdoffs, u16 clkctrl_offs) -{ -} - -static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, - u16 clkctrl_offs) -{ -} - -# endif - /* * In an ideal world, we would not export these low-level functions, * but this will probably take some time to fix properly diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 1706ebcec08..14734746457 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -35,6 +35,16 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, }; +/* + * ADS7846 driver maybe request a gpio according to the value + * of pdata->get_pendown_state, but we have done this. So set + * get_pendown_state to avoid twice gpio requesting. + */ +static int omap3_get_pendown_state(void) +{ + return !gpio_get_value(OMAP3_EVM_TS_GPIO); +} + static struct ads7846_platform_data ads7846_config = { .x_max = 0x0fff, .y_max = 0x0fff, @@ -45,6 +55,7 @@ static struct ads7846_platform_data ads7846_config = { .debounce_rep = 1, .gpio_pendown = -EINVAL, .keep_vref_on = 1, + .get_pendown_state = &omap3_get_pendown_state, }; static struct spi_board_info ads7846_spi_board_info __initdata = { @@ -63,28 +74,30 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct spi_board_info *spi_bi = &ads7846_spi_board_info; int err; - if (board_pdata && board_pdata->get_pendown_state) { - err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); - if (err) { - pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); - return; - } - gpio_export(gpio_pendown, 0); - - if (gpio_debounce) - gpio_set_debounce(gpio_pendown, gpio_debounce); + err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); + if (err) { + pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); + return; } + if (gpio_debounce) + gpio_set_debounce(gpio_pendown, gpio_debounce); + spi_bi->bus_num = bus_num; spi_bi->irq = gpio_to_irq(gpio_pendown); if (board_pdata) { board_pdata->gpio_pendown = gpio_pendown; spi_bi->platform_data = board_pdata; + if (board_pdata->get_pendown_state) + gpio_export(gpio_pendown, 0); } else { ads7846_config.gpio_pendown = gpio_pendown; } + if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state)) + gpio_free(gpio_pendown); + spi_register_board_info(&ads7846_spi_board_info, 1); } #else diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index a0b4a42836a..4c4ef6a6166 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -4,6 +4,7 @@ #include "twl-common.h" #define NAND_BLOCK_SIZE SZ_128K +#define OMAP3_EVM_TS_GPIO 175 struct mtd_partition; struct ads7846_platform_data; diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 8a6953a34fe..069f9725b1c 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -29,8 +29,6 @@ /* Global address base setup code */ -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - static void __init __omap2_set_globals(struct omap_globals *omap2_globals) { omap2_set_globals_tap(omap2_globals); @@ -39,8 +37,6 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals) omap2_set_globals_prcm(omap2_globals); } -#endif - #if defined(CONFIG_SOC_OMAP2420) static struct omap_globals omap242x_globals = { @@ -134,7 +130,9 @@ void __init ti81xx_map_io(void) { omapti81xx_map_common_io(); } +#endif +#if defined(CONFIG_SOC_AM33XX) #define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + \ TI81XX_CONTROL_DEVICE_ID - 0x204) @@ -171,9 +169,7 @@ static struct omap_globals omap4_globals = { void __init omap2_set_globals_443x(void) { - omap2_set_globals_tap(&omap4_globals); - omap2_set_globals_control(&omap4_globals); - omap2_set_globals_prcm(&omap4_globals); + __omap2_set_globals(&omap4_globals); } void __init omap4_map_io(void) @@ -182,3 +178,27 @@ void __init omap4_map_io(void) } #endif +#if defined(CONFIG_SOC_OMAP5) +static struct omap_globals omap5_globals = { + .class = OMAP54XX_CLASS, + .tap = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE), + .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE), + .cm2 = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE), + .prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE), +}; + +void __init omap2_set_globals_5xxx(void) +{ + omap2_set_globals_tap(&omap5_globals); + omap2_set_globals_control(&omap5_globals); + omap2_set_globals_prcm(&omap5_globals); +} + +void __init omap5_map_io(void) +{ + omap5_map_common_io(); +} +#endif diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index be9dfd1abe6..1f65b1871c2 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -115,12 +115,22 @@ static inline int omap_mux_late_init(void) } #endif +#ifdef CONFIG_SOC_OMAP5 +extern void omap5_map_common_io(void); +#else +static inline void omap5_map_common_io(void) +{ +} +#endif + extern void omap2_init_common_infrastructure(void); extern struct sys_timer omap2_timer; extern struct sys_timer omap3_timer; extern struct sys_timer omap3_secure_timer; +extern struct sys_timer omap3_am33xx_timer; extern struct sys_timer omap4_timer; +extern struct sys_timer omap5_timer; void omap2420_init_early(void); void omap2430_init_early(void); @@ -128,9 +138,12 @@ void omap3430_init_early(void); void omap35xx_init_early(void); void omap3630_init_early(void); void omap3_init_early(void); /* Do not use this one */ +void am33xx_init_early(void); void am35xx_init_early(void); void ti81xx_init_early(void); +void am33xx_init_early(void); void omap4430_init_early(void); +void omap5_init_early(void); void omap3_init_late(void); /* Do not use this one */ void omap4430_init_late(void); void omap2420_init_late(void); @@ -166,12 +179,18 @@ void omap2_set_globals_242x(void); void omap2_set_globals_243x(void); void omap2_set_globals_3xxx(void); void omap2_set_globals_443x(void); +void omap2_set_globals_5xxx(void); void omap2_set_globals_ti81xx(void); void omap2_set_globals_am33xx(void); /* These get called from omap2_set_globals_xxxx(), do not call these */ void omap2_set_globals_tap(struct omap_globals *); +#if defined(CONFIG_SOC_HAS_OMAP2_SDRC) void omap2_set_globals_sdrc(struct omap_globals *); +#else +static inline void omap2_set_globals_sdrc(struct omap_globals *omap2_globals) +{ } +#endif void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); @@ -180,6 +199,7 @@ void omap243x_map_io(void); void omap3_map_io(void); void am33xx_map_io(void); void omap4_map_io(void); +void omap5_map_io(void); void ti81xx_map_io(void); void omap_barriers_init(void); @@ -219,6 +239,8 @@ void omap3_intc_prepare_idle(void); void omap3_intc_resume_idle(void); void omap2_intc_handle_irq(struct pt_regs *regs); void omap3_intc_handle_irq(struct pt_regs *regs); +void omap_intc_of_init(void); +void omap_gic_of_init(void); #ifdef CONFIG_CACHE_L2X0 extern void __iomem *omap4_get_l2cache_base(void); @@ -226,10 +248,10 @@ extern void __iomem *omap4_get_l2cache_base(void); struct device_node; #ifdef CONFIG_OF -int __init omap_intc_of_init(struct device_node *node, +int __init intc_of_init(struct device_node *node, struct device_node *parent); #else -int __init omap_intc_of_init(struct device_node *node, +int __init intc_of_init(struct device_node *node, struct device_node *parent) { return 0; @@ -256,6 +278,7 @@ extern void omap_secondary_startup(void); extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); extern void omap_auxcoreboot_addr(u32 cpu_addr); extern u32 omap_read_auxcoreboot0(void); +extern void omap5_secondary_startup(void); #endif #if defined(CONFIG_SMP) && defined(CONFIG_PM) diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 08e674bb041..3223b81e753 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -241,6 +241,49 @@ void omap3_ctrl_write_boot_mode(u8 bootmode) #endif +/** + * omap_ctrl_write_dsp_boot_addr - set boot address for a remote processor + * @bootaddr: physical address of the boot loader + * + * Set boot address for the boot loader of a supported processor + * when a power ON sequence occurs. + */ +void omap_ctrl_write_dsp_boot_addr(u32 bootaddr) +{ + u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTADDR : + cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTADDR : + cpu_is_omap44xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR : + 0; + + if (!offset) { + pr_err("%s: unsupported omap type\n", __func__); + return; + } + + omap_ctrl_writel(bootaddr, offset); +} + +/** + * omap_ctrl_write_dsp_boot_mode - set boot mode for a remote processor + * @bootmode: 8-bit value to pass to some boot code + * + * Sets boot mode for the boot loader of a supported processor + * when a power ON sequence occurs. + */ +void omap_ctrl_write_dsp_boot_mode(u8 bootmode) +{ + u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTMOD : + cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTMOD : + 0; + + if (!offset) { + pr_err("%s: unsupported omap type\n", __func__); + return; + } + + omap_ctrl_writel(bootmode, offset); +} + #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) /* * Clears the scratchpad contents in case of cold boot- diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index a406fd045ce..b8cdc8531b6 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -21,6 +21,8 @@ #include <mach/ctrl_module_pad_core_44xx.h> #include <mach/ctrl_module_pad_wkup_44xx.h> +#include <plat/am33xx.h> + #ifndef __ASSEMBLY__ #define OMAP242X_CTRL_REGADDR(reg) \ OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) @@ -28,6 +30,8 @@ OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) #define OMAP343X_CTRL_REGADDR(reg) \ OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#define AM33XX_CTRL_REGADDR(reg) \ + AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg)) #else #define OMAP242X_CTRL_REGADDR(reg) \ OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) @@ -35,6 +39,8 @@ OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) #define OMAP343X_CTRL_REGADDR(reg) \ OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#define AM33XX_CTRL_REGADDR(reg) \ + AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg)) #endif /* __ASSEMBLY__ */ /* @@ -182,6 +188,7 @@ #define OMAP3630_CONTROL_FUSE_OPP120_VDD1 (OMAP2_CONTROL_GENERAL + 0x0120) #define OMAP3630_CONTROL_FUSE_OPP50_VDD2 (OMAP2_CONTROL_GENERAL + 0x0128) #define OMAP3630_CONTROL_FUSE_OPP100_VDD2 (OMAP2_CONTROL_GENERAL + 0x012C) +#define OMAP3630_CONTROL_CAMERA_PHY_CTRL (OMAP2_CONTROL_GENERAL + 0x02f0) /* OMAP44xx control efuse offsets */ #define OMAP44XX_CONTROL_FUSE_IVA_OPP50 0x22C @@ -246,6 +253,10 @@ /* TI81XX CONTROL_DEVCONF register offsets */ #define TI81XX_CONTROL_DEVICE_ID (TI81XX_CONTROL_DEVCONF + 0x000) +/* OMAP54XX CONTROL STATUS register */ +#define OMAP5XXX_CONTROL_STATUS 0x134 +#define OMAP5_DEVICETYPE_MASK (0x7 << 6) + /* * REVISIT: This list of registers is not comprehensive - there are more * that should be added. @@ -312,15 +323,15 @@ OMAP343X_SCRATCHPAD + reg) /* AM35XX_CONTROL_IPSS_CLK_CTRL bits */ -#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0 -#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1 -#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2 -#define AM35XX_HECC_VBUSP_CLK_SHIFT 3 -#define AM35XX_USBOTG_FCLK_SHIFT 8 -#define AM35XX_CPGMAC_FCLK_SHIFT 9 -#define AM35XX_VPFE_FCLK_SHIFT 10 - -/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/ +#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0 +#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1 +#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2 +#define AM35XX_HECC_VBUSP_CLK_SHIFT 3 +#define AM35XX_USBOTG_FCLK_SHIFT 8 +#define AM35XX_CPGMAC_FCLK_SHIFT 9 +#define AM35XX_VPFE_FCLK_SHIFT 10 + +/* AM35XX CONTROL_LVL_INTR_CLEAR bits */ #define AM35XX_CPGMAC_C0_MISC_PULSE_CLR BIT(0) #define AM35XX_CPGMAC_C0_RX_PULSE_CLR BIT(1) #define AM35XX_CPGMAC_C0_RX_THRESH_CLR BIT(2) @@ -330,21 +341,22 @@ #define AM35XX_VPFE_CCDC_VD1_INT_CLR BIT(6) #define AM35XX_VPFE_CCDC_VD2_INT_CLR BIT(7) -/*AM35XX CONTROL_IP_SW_RESET bits*/ +/* AM35XX CONTROL_IP_SW_RESET bits */ #define AM35XX_USBOTGSS_SW_RST BIT(0) #define AM35XX_CPGMACSS_SW_RST BIT(1) #define AM35XX_VPFE_VBUSP_SW_RST BIT(2) #define AM35XX_HECC_SW_RST BIT(3) #define AM35XX_VPFE_PCLK_SW_RST BIT(4) -/* - * CONTROL AM33XX STATUS register - */ +/* AM33XX CONTROL_STATUS register */ #define AM33XX_CONTROL_STATUS 0x040 +#define AM33XX_CONTROL_SEC_CLK_CTRL 0x1bc -/* - * CONTROL OMAP STATUS register to identify OMAP3 features - */ +/* AM33XX CONTROL_STATUS bitfields (partial) */ +#define AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT 22 +#define AM33XX_CONTROL_STATUS_SYSBOOT1_MASK (0x3 << 22) + +/* CONTROL OMAP STATUS register to identify OMAP3 features */ #define OMAP3_CONTROL_OMAP_STATUS 0x044c #define OMAP3_SGX_SHIFT 13 @@ -397,6 +409,8 @@ extern u32 omap3_arm_context[128]; extern void omap3_control_save_context(void); extern void omap3_control_restore_context(void); extern void omap3_ctrl_write_boot_mode(u8 bootmode); +extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr); +extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode); extern void omap3630_ctrl_disable_rta(void); extern int omap3_ctrl_save_padconf(void); #else diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 207bc1c7759..f2a49a48ef5 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -36,8 +36,6 @@ #include "control.h" #include "common.h" -#ifdef CONFIG_CPU_IDLE - /* Mach specific information to be recorded in the C-state driver_data */ struct omap3_idle_statedata { u32 mpu_state; @@ -77,20 +75,6 @@ static struct omap3_idle_statedata omap3_idle_data[] = { static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd; -static int _cpuidle_allow_idle(struct powerdomain *pwrdm, - struct clockdomain *clkdm) -{ - clkdm_allow_idle(clkdm); - return 0; -} - -static int _cpuidle_deny_idle(struct powerdomain *pwrdm, - struct clockdomain *clkdm) -{ - clkdm_deny_idle(clkdm); - return 0; -} - static int __omap3_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) @@ -108,8 +92,8 @@ static int __omap3_enter_idle(struct cpuidle_device *dev, /* Deny idle for C1 */ if (index == 0) { - pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle); - pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle); + clkdm_deny_idle(mpu_pd->pwrdm_clkdms[0]); + clkdm_deny_idle(core_pd->pwrdm_clkdms[0]); } /* @@ -131,8 +115,8 @@ static int __omap3_enter_idle(struct cpuidle_device *dev, /* Re-allow idle for C1 */ if (index == 0) { - pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle); - pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle); + clkdm_allow_idle(mpu_pd->pwrdm_clkdms[0]); + clkdm_allow_idle(core_pd->pwrdm_clkdms[0]); } return_sleep_time: @@ -178,7 +162,7 @@ static int next_valid_state(struct cpuidle_device *dev, u32 mpu_deepest_state = PWRDM_POWER_RET; u32 core_deepest_state = PWRDM_POWER_RET; int idx; - int next_index = -1; + int next_index = 0; /* C1 is the default value */ if (enable_off_mode) { mpu_deepest_state = PWRDM_POWER_OFF; @@ -209,12 +193,6 @@ static int next_valid_state(struct cpuidle_device *dev, } } - /* - * C1 is always valid. - * So, no need to check for 'next_index == -1' outside - * this loop. - */ - return next_index; } @@ -228,23 +206,22 @@ static int next_valid_state(struct cpuidle_device *dev, * the device to the specified or a safer state. */ static int omap3_enter_idle_bm(struct cpuidle_device *dev, - struct cpuidle_driver *drv, + struct cpuidle_driver *drv, int index) { int new_state_idx; - u32 core_next_state, per_next_state = 0, per_saved_state = 0, cam_state; + u32 core_next_state, per_next_state = 0, per_saved_state = 0; struct omap3_idle_statedata *cx; int ret; /* - * Prevent idle completely if CAM is active. + * Use only C1 if CAM is active. * CAM does not have wakeup capability in OMAP3. */ - cam_state = pwrdm_read_pwrst(cam_pd); - if (cam_state == PWRDM_POWER_ON) { + if (pwrdm_read_pwrst(cam_pd) == PWRDM_POWER_ON) new_state_idx = drv->safe_state_index; - goto select_state; - } + else + new_state_idx = next_valid_state(dev, drv, index); /* * FIXME: we currently manage device-specific idle states @@ -254,24 +231,28 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, * its own code. */ - /* - * Prevent PER off if CORE is not in retention or off as this - * would disable PER wakeups completely. - */ - cx = &omap3_idle_data[index]; + /* Program PER state */ + cx = &omap3_idle_data[new_state_idx]; core_next_state = cx->core_state; per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd); - if ((per_next_state == PWRDM_POWER_OFF) && - (core_next_state > PWRDM_POWER_RET)) - per_next_state = PWRDM_POWER_RET; + if (new_state_idx == 0) { + /* In C1 do not allow PER state lower than CORE state */ + if (per_next_state < core_next_state) + per_next_state = core_next_state; + } else { + /* + * Prevent PER OFF if CORE is not in RETention or OFF as this + * would disable PER wakeups completely. + */ + if ((per_next_state == PWRDM_POWER_OFF) && + (core_next_state > PWRDM_POWER_RET)) + per_next_state = PWRDM_POWER_RET; + } /* Are we changing PER target state? */ if (per_next_state != per_saved_state) pwrdm_set_next_pwrst(per_pd, per_next_state); - new_state_idx = next_valid_state(dev, drv, index); - -select_state: ret = omap3_enter_idle(dev, drv, new_state_idx); /* Restore original PER state if it was modified */ @@ -288,7 +269,7 @@ struct cpuidle_driver omap3_idle_driver = { .owner = THIS_MODULE, .states = { { - .enter = omap3_enter_idle, + .enter = omap3_enter_idle_bm, .exit_latency = 2 + 2, .target_residency = 5, .flags = CPUIDLE_FLAG_TIME_VALID, @@ -379,9 +360,3 @@ int __init omap3_idle_init(void) return 0; } -#else -int __init omap3_idle_init(void) -{ - return 0; -} -#endif /* CONFIG_CPU_IDLE */ diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index be1617ca84b..02d15bbd4e3 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -22,8 +22,6 @@ #include "pm.h" #include "prm.h" -#ifdef CONFIG_CPU_IDLE - /* Machine specific information */ struct omap4_idle_statedata { u32 cpu_state; @@ -199,9 +197,3 @@ int __init omap4_idle_init(void) return 0; } -#else -int __init omap4_idle_init(void) -{ - return 0; -} -#endif /* CONFIG_CPU_IDLE */ diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 7b4b9327e54..c00c68961bb 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -27,7 +27,6 @@ #include "iomap.h" #include <plat/board.h> -#include <plat/mmc.h> #include <plat/dma.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> @@ -84,7 +83,7 @@ static int __init omap4_l3_init(void) * To avoid code running on other OMAPs in * multi-omap builds */ - if (!(cpu_is_omap44xx())) + if (!cpu_is_omap44xx() && !soc_is_omap54xx()) return -ENODEV; for (i = 0; i < L3_MODULES; i++) { @@ -603,112 +602,6 @@ static inline void omap_init_aes(void) { } /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) - -static inline void omap242x_mmc_mux(struct omap_mmc_platform_data - *mmc_controller) -{ - if ((mmc_controller->slots[0].switch_pin > 0) && \ - (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, - OMAP_PIN_INPUT_PULLUP); - if ((mmc_controller->slots[0].gpio_wp > 0) && \ - (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, - OMAP_PIN_INPUT_PULLUP); - - omap_mux_init_signal("sdmmc_cmd", 0); - omap_mux_init_signal("sdmmc_clki", 0); - omap_mux_init_signal("sdmmc_clko", 0); - omap_mux_init_signal("sdmmc_dat0", 0); - omap_mux_init_signal("sdmmc_dat_dir0", 0); - omap_mux_init_signal("sdmmc_cmd_dir", 0); - if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) { - omap_mux_init_signal("sdmmc_dat1", 0); - omap_mux_init_signal("sdmmc_dat2", 0); - omap_mux_init_signal("sdmmc_dat3", 0); - omap_mux_init_signal("sdmmc_dat_dir1", 0); - omap_mux_init_signal("sdmmc_dat_dir2", 0); - omap_mux_init_signal("sdmmc_dat_dir3", 0); - } - - /* - * Use internal loop-back in MMC/SDIO Module Input Clock - * selection - */ - if (mmc_controller->slots[0].internal_clock) { - u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - v |= (1 << 24); - omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); - } -} - -void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) -{ - struct platform_device *pdev; - struct omap_hwmod *oh; - int id = 0; - char *oh_name = "msdi1"; - char *dev_name = "mmci-omap"; - - if (!mmc_data[0]) { - pr_err("%s fails: Incomplete platform data\n", __func__); - return; - } - - omap242x_mmc_mux(mmc_data[0]); - - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up %s\n", oh_name); - return; - } - pdev = omap_device_build(dev_name, id, oh, mmc_data[0], - sizeof(struct omap_mmc_platform_data), NULL, 0, 0); - if (IS_ERR(pdev)) - WARN(1, "Can'd build omap_device for %s:%s.\n", - dev_name, oh->name); -} - -#endif - -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE) -#define OMAP_HDQ_BASE 0x480B2000 -static struct resource omap_hdq_resources[] = { - { - .start = OMAP_HDQ_BASE, - .end = OMAP_HDQ_BASE + 0x1C, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_24XX_HDQ_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; -static struct platform_device omap_hdq_dev = { - .name = "omap_hdq", - .id = 0, - .dev = { - .platform_data = NULL, - }, - .num_resources = ARRAY_SIZE(omap_hdq_resources), - .resource = omap_hdq_resources, -}; -static inline void omap_hdq_init(void) -{ - if (cpu_is_omap2420()) - return; - - platform_device_register(&omap_hdq_dev); -} -#else -static inline void omap_hdq_init(void) {} -#endif - -/*---------------------------------------------------------------------------*/ - #if defined(CONFIG_VIDEO_OMAP2_VOUT) || \ defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE) #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) @@ -753,7 +646,6 @@ static int __init omap2_init_devices(void) omap_init_mcspi(); } omap_init_pmu(); - omap_hdq_init(); omap_init_sti(); omap_init_sham(); omap_init_aes(); @@ -772,7 +664,7 @@ static int __init omap_init_wdt(void) char *oh_name = "wd_timer2"; char *dev_name = "omap_wdt"; - if (!cpu_class_is_omap2()) + if (!cpu_class_is_omap2() || of_have_populated_dt()) return 0; oh = omap_hwmod_lookup(oh_name); diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index f0f10beeffe..b9c8d2f6a81 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -135,11 +135,20 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n) */ static int _omap3_noncore_dpll_lock(struct clk *clk) { + const struct dpll_data *dd; u8 ai; - int r; + u8 state = 1; + int r = 0; pr_debug("clock: locking DPLL %s\n", clk->name); + dd = clk->dpll_data; + state <<= __ffs(dd->idlest_mask); + + /* Check if already locked */ + if ((__raw_readl(dd->idlest_reg) & dd->idlest_mask) == state) + goto done; + ai = omap3_dpll_autoidle_read(clk); if (ai) @@ -152,6 +161,7 @@ static int _omap3_noncore_dpll_lock(struct clk *clk) if (ai) omap3_dpll_allow_idle(clk); +done: return r; } @@ -628,3 +638,17 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk) rate = clk->parent->rate * 2; return rate; } + +/* OMAP3/4 non-CORE DPLL clkops */ + +const struct clkops clkops_omap3_noncore_dpll_ops = { + .enable = omap3_noncore_dpll_enable, + .disable = omap3_noncore_dpll_disable, + .allow_idle = omap3_dpll_allow_idle, + .deny_idle = omap3_dpll_deny_idle, +}; + +const struct clkops clkops_omap3_core_dpll_ops = { + .allow_idle = omap3_dpll_allow_idle, + .deny_idle = omap3_dpll_deny_idle, +}; diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c new file mode 100644 index 00000000000..72e0f01b715 --- /dev/null +++ b/arch/arm/mach-omap2/drm.c @@ -0,0 +1,61 @@ +/* + * DRM/KMS device registration for TI OMAP platforms + * + * Copyright (C) 2012 Texas Instruments + * Author: Rob Clark <rob.clark@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <plat/omap_device.h> +#include <plat/omap_hwmod.h> + +#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE) + +static struct platform_device omap_drm_device = { + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .name = "omapdrm", + .id = 0, +}; + +static int __init omap_init_drm(void) +{ + struct omap_hwmod *oh = NULL; + struct platform_device *pdev; + + /* lookup and populate the DMM information, if present - OMAP4+ */ + oh = omap_hwmod_lookup("dmm"); + + if (oh) { + pdev = omap_device_build(oh->name, -1, oh, NULL, 0, NULL, 0, + false); + WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", + oh->name); + } + + return platform_device_register(&omap_drm_device); + +} + +arch_initcall(omap_init_drm); + +#endif diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index 88ffa1e645c..a636ebc16b3 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -23,6 +23,7 @@ #include <asm/memblock.h> +#include "control.h" #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" #ifdef CONFIG_BRIDGE_DVFS @@ -46,6 +47,9 @@ static struct omap_dsp_platform_data omap_dsp_pdata __initdata = { .dsp_cm_read = omap2_cm_read_mod_reg, .dsp_cm_write = omap2_cm_write_mod_reg, .dsp_cm_rmw_bits = omap2_cm_rmw_mod_reg_bits, + + .set_bootaddr = omap_ctrl_write_dsp_boot_addr, + .set_bootmode = omap_ctrl_write_dsp_boot_mode, }; static phys_addr_t omap_dsp_phys_mempool_base; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 2286410671e..b2b5759ab0f 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -727,7 +727,8 @@ static int __init gpmc_init(void) ck = "gpmc_fck"; l = OMAP34XX_GPMC_BASE; gpmc_irq = INT_34XX_GPMC_IRQ; - } else if (cpu_is_omap44xx()) { + } else if (cpu_is_omap44xx() || soc_is_omap54xx()) { + /* Base address and irq number are same for OMAP4/5 */ ck = "gpmc_ck"; l = OMAP44XX_GPMC_BASE; gpmc_irq = OMAP44XX_IRQ_GPMC; diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c index 297ebe03f09..cdd6dda0382 100644 --- a/arch/arm/mach-omap2/hdq1w.c +++ b/arch/arm/mach-omap2/hdq1w.c @@ -22,7 +22,13 @@ * 02110-1301 USA */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> + #include <plat/omap_hwmod.h> +#include <plat/omap_device.h> #include <plat/hdq1w.h> #include "common.h" @@ -70,3 +76,23 @@ int omap_hdq1w_reset(struct omap_hwmod *oh) return 0; } + +static int __init omap_init_hdq(void) +{ + int id = -1; + struct platform_device *pdev; + struct omap_hwmod *oh; + char *oh_name = "hdq1w"; + char *devname = "omap_hdq"; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) + return 0; + + pdev = omap_device_build(devname, id, oh, NULL, 0, NULL, 0, 0); + WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n", + devname, oh->name); + + return 0; +} +arch_initcall(omap_init_hdq); diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 00486a8564f..40373db649a 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -44,12 +44,17 @@ int omap_type(void) if (cpu_is_omap24xx()) { val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS); - } else if (cpu_is_am33xx()) { + } else if (soc_is_am33xx()) { val = omap_ctrl_readl(AM33XX_CONTROL_STATUS); } else if (cpu_is_omap34xx()) { val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS); } else if (cpu_is_omap44xx()) { val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS); + } else if (soc_is_omap54xx()) { + val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS); + val &= OMAP5_DEVICETYPE_MASK; + val >>= 6; + goto out; } else { pr_err("Cannot detect omap type!\n"); goto out; @@ -100,7 +105,7 @@ static u16 tap_prod_id; void omap_get_die_id(struct omap_die_id *odi) { - if (cpu_is_omap44xx()) { + if (cpu_is_omap44xx() || soc_is_omap54xx()) { odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0); odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1); odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2); @@ -189,7 +194,7 @@ static void __init omap3_cpuinfo(void) cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505"; } else if (cpu_is_ti816x()) { cpu_name = "TI816X"; - } else if (cpu_is_am335x()) { + } else if (soc_is_am335x()) { cpu_name = "AM335X"; } else if (cpu_is_ti814x()) { cpu_name = "TI814X"; @@ -513,6 +518,41 @@ void __init omap4xxx_check_revision(void) ((omap_rev() >> 12) & 0xf), ((omap_rev() >> 8) & 0xf)); } +void __init omap5xxx_check_revision(void) +{ + u32 idcode; + u16 hawkeye; + u8 rev; + + idcode = read_tap_reg(OMAP_TAP_IDCODE); + hawkeye = (idcode >> 12) & 0xffff; + rev = (idcode >> 28) & 0xff; + switch (hawkeye) { + case 0xb942: + switch (rev) { + case 0: + default: + omap_revision = OMAP5430_REV_ES1_0; + } + break; + + case 0xb998: + switch (rev) { + case 0: + default: + omap_revision = OMAP5432_REV_ES1_0; + } + break; + + default: + /* Unknown default to latest silicon rev as default*/ + omap_revision = OMAP5430_REV_ES1_0; + } + + pr_info("OMAP%04x ES%d.0\n", + omap_rev() >> 16, ((omap_rev() >> 12) & 0xf)); +} + /* * Set up things for map_io and processor detection later on. Gets called * pretty much first thing from board init. For multi-omap, this gets diff --git a/arch/arm/mach-omap2/include/mach/am35xx.h b/arch/arm/mach-omap2/include/mach/am35xx.h index f1e13d1ca5e..95594495fcf 100644 --- a/arch/arm/mach-omap2/include/mach/am35xx.h +++ b/arch/arm/mach-omap2/include/mach/am35xx.h @@ -36,6 +36,8 @@ #define AM35XX_EMAC_CNTRL_MOD_OFFSET (0x0) #define AM35XX_EMAC_CNTRL_RAM_OFFSET (0x20000) #define AM35XX_EMAC_MDIO_OFFSET (0x30000) +#define AM35XX_IPSS_MDIO_BASE (AM35XX_IPSS_EMAC_BASE + \ + AM35XX_EMAC_MDIO_OFFSET) #define AM35XX_EMAC_CNTRL_RAM_SIZE (0x2000) #define AM35XX_EMAC_RAM_ADDR (AM3517_EMAC_BASE + \ AM3517_EMAC_CNTRL_RAM_OFFSET) diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h index 2f7ac70a20d..01970824e0e 100644 --- a/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h +++ b/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h @@ -42,6 +42,7 @@ #define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_1 0x0268 #define OMAP4_CTRL_MODULE_CORE_STATUS 0x02c4 #define OMAP4_CTRL_MODULE_CORE_DEV_CONF 0x0300 +#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR 0x0304 #define OMAP4_CTRL_MODULE_CORE_LDOVBB_IVA_VOLTAGE_CTRL 0x0314 #define OMAP4_CTRL_MODULE_CORE_LDOVBB_MPU_VOLTAGE_CTRL 0x0318 #define OMAP4_CTRL_MODULE_CORE_LDOSRAM_IVA_VOLTAGE_CTRL 0x0320 diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index cdfc2a1f0e7..93d10de7129 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -60,18 +60,20 @@ omap_uart_lsr: .word 0 beq 23f @ configure OMAP2UART3 cmp \rp, #OMAP3UART3 @ only on 34xx beq 33f @ configure OMAP3UART3 - cmp \rp, #OMAP4UART3 @ only on 44xx - beq 43f @ configure OMAP4UART3 + cmp \rp, #OMAP4UART3 @ only on 44xx/54xx + beq 43f @ configure OMAP4/5UART3 cmp \rp, #OMAP3UART4 @ only on 36xx beq 34f @ configure OMAP3UART4 - cmp \rp, #OMAP4UART4 @ only on 44xx - beq 44f @ configure OMAP4UART4 + cmp \rp, #OMAP4UART4 @ only on 44xx/54xx + beq 44f @ configure OMAP4/5UART4 cmp \rp, #TI81XXUART1 @ ti81Xx UART offsets different beq 81f @ configure UART1 cmp \rp, #TI81XXUART2 @ ti81Xx UART offsets different beq 82f @ configure UART2 cmp \rp, #TI81XXUART3 @ ti81Xx UART offsets different beq 83f @ configure UART3 + cmp \rp, #AM33XXUART1 @ AM33XX UART offsets different + beq 84f @ configure UART1 cmp \rp, #ZOOM_UART @ only on zoom2/3 beq 95f @ configure ZOOM_UART @@ -100,7 +102,9 @@ omap_uart_lsr: .word 0 b 98f 83: mov \rp, #UART_OFFSET(TI81XX_UART3_BASE) b 98f - +84: ldr \rp, =AM33XX_UART1_BASE + and \rp, \rp, #0x00ffffff + b 97f 95: ldr \rp, =ZOOM_UART_BASE str \rp, [\tmp, #0] @ omap_uart_phys ldr \rp, =ZOOM_UART_VIRT @@ -109,6 +113,17 @@ omap_uart_lsr: .word 0 str \rp, [\tmp, #8] @ omap_uart_lsr b 10b + /* AM33XX: Store both phys and virt address for the uart */ +97: add \rp, \rp, #0x44000000 @ phys base + str \rp, [\tmp, #0] @ omap_uart_phys + sub \rp, \rp, #0x44000000 @ phys base + add \rp, \rp, #0xf9000000 @ virt base + str \rp, [\tmp, #4] @ omap_uart_virt + mov \rp, #(UART_LSR << OMAP_PORT_SHIFT) + str \rp, [\tmp, #8] @ omap_uart_lsr + + b 10b + /* Store both phys and virt address for the uart */ 98: add \rp, \rp, #0x48000000 @ phys base str \rp, [\tmp, #0] @ omap_uart_phys diff --git a/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h b/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h index 548de90b58c..b0fd16f5c39 100644 --- a/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h +++ b/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h @@ -11,15 +11,20 @@ #ifndef OMAP_ARCH_WAKEUPGEN_H #define OMAP_ARCH_WAKEUPGEN_H +/* OMAP4 and OMAP5 has same base address */ +#define OMAP_WKUPGEN_BASE 0x48281000 + #define OMAP_WKG_CONTROL_0 0x00 #define OMAP_WKG_ENB_A_0 0x10 #define OMAP_WKG_ENB_B_0 0x14 #define OMAP_WKG_ENB_C_0 0x18 #define OMAP_WKG_ENB_D_0 0x1c +#define OMAP_WKG_ENB_E_0 0x20 #define OMAP_WKG_ENB_A_1 0x410 #define OMAP_WKG_ENB_B_1 0x414 #define OMAP_WKG_ENB_C_1 0x418 #define OMAP_WKG_ENB_D_1 0x41c +#define OMAP_WKG_ENB_E_1 0x420 #define OMAP_AUX_CORE_BOOT_0 0x800 #define OMAP_AUX_CORE_BOOT_1 0x804 #define OMAP_PTMSYNCREQ_MASK 0xc00 @@ -28,4 +33,6 @@ #define OMAP_TIMESTAMPCYCLEHI 0xc0c extern int __init omap_wakeupgen_init(void); +extern void __iomem *omap_get_wakeupgen_base(void); +extern int omap_secure_apis_support(void); #endif diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 8d014ba04ab..4d2d981ff5c 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -38,6 +38,7 @@ #include "powerdomain.h" #include "clockdomain.h" #include "common.h" +#include "clock.h" #include "clock2xxx.h" #include "clock3xxx.h" #include "clock44xx.h" @@ -233,6 +234,35 @@ static struct map_desc omap44xx_io_desc[] __initdata = { }; #endif +#ifdef CONFIG_SOC_OMAP5 +static struct map_desc omap54xx_io_desc[] __initdata = { + { + .virtual = L3_54XX_VIRT, + .pfn = __phys_to_pfn(L3_54XX_PHYS), + .length = L3_54XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_54XX_VIRT, + .pfn = __phys_to_pfn(L4_54XX_PHYS), + .length = L4_54XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_WK_54XX_VIRT, + .pfn = __phys_to_pfn(L4_WK_54XX_PHYS), + .length = L4_WK_54XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_PER_54XX_VIRT, + .pfn = __phys_to_pfn(L4_PER_54XX_PHYS), + .length = L4_PER_54XX_SIZE, + .type = MT_DEVICE, + }, +}; +#endif + #ifdef CONFIG_SOC_OMAP2420 void __init omap242x_map_common_io(void) { @@ -278,6 +308,12 @@ void __init omap44xx_map_common_io(void) } #endif +#ifdef CONFIG_SOC_OMAP5 +void __init omap5_map_common_io(void) +{ + iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc)); +} +#endif /* * omap2_init_reprogram_sdrc - reprogram SDRC timing parameters * @@ -477,6 +513,20 @@ void __init ti81xx_init_late(void) } #endif +#ifdef CONFIG_SOC_AM33XX +void __init am33xx_init_early(void) +{ + omap2_set_globals_am33xx(); + omap3xxx_check_revision(); + ti81xx_check_features(); + omap_common_init_early(); + am33xx_voltagedomains_init(); + am33xx_powerdomains_init(); + am33xx_clockdomains_init(); + am33xx_clk_init(); +} +#endif + #ifdef CONFIG_ARCH_OMAP4 void __init omap4430_init_early(void) { @@ -500,6 +550,15 @@ void __init omap4430_init_late(void) } #endif +#ifdef CONFIG_SOC_OMAP5 +void __init omap5_init_early(void) +{ + omap2_set_globals_5xxx(); + omap5xxx_check_revision(); + omap_common_init_early(); +} +#endif + void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1) { diff --git a/arch/arm/mach-omap2/iomap.h b/arch/arm/mach-omap2/iomap.h index 80b88921fab..cce2b65039f 100644 --- a/arch/arm/mach-omap2/iomap.h +++ b/arch/arm/mach-omap2/iomap.h @@ -1,6 +1,14 @@ /* * IO mappings for OMAP2+ * + * IO definitions for TI OMAP processors and boards + * + * Copied from arch/arm/mach-sa1100/include/mach/io.h + * Copyright (C) 1997-1999 Russell King + * + * Copyright (C) 2009-2012 Texas Instruments + * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -166,4 +174,23 @@ /* 0x49000000 --> 0xfb000000 */ #define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_ABE_44XX_SIZE SZ_1M +/* + * ---------------------------------------------------------------------------- + * Omap5 specific IO mapping + * ---------------------------------------------------------------------------- + */ +#define L3_54XX_PHYS L3_54XX_BASE /* 0x44000000 --> 0xf8000000 */ +#define L3_54XX_VIRT (L3_54XX_PHYS + OMAP4_L3_IO_OFFSET) +#define L3_54XX_SIZE SZ_1M + +#define L4_54XX_PHYS L4_54XX_BASE /* 0x4a000000 --> 0xfc000000 */ +#define L4_54XX_VIRT (L4_54XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_54XX_SIZE SZ_4M + +#define L4_WK_54XX_PHYS L4_WK_54XX_BASE /* 0x4ae00000 --> 0xfce00000 */ +#define L4_WK_54XX_VIRT (L4_WK_54XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_WK_54XX_SIZE SZ_2M +#define L4_PER_54XX_PHYS L4_PER_54XX_BASE /* 0x48000000 --> 0xfa000000 */ +#define L4_PER_54XX_VIRT (L4_PER_54XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_PER_54XX_SIZE SZ_4M diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 6038a8c84b7..bcd83db41bb 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -21,6 +21,7 @@ #include <linux/irqdomain.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_irq.h> #include <mach/hardware.h> @@ -258,11 +259,11 @@ asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs omap_intc_handle_irq(base_addr, regs); } -int __init omap_intc_of_init(struct device_node *node, +int __init intc_of_init(struct device_node *node, struct device_node *parent) { struct resource res; - u32 nr_irqs = 96; + u32 nr_irq = 96; if (WARN_ON(!node)) return -ENODEV; @@ -272,15 +273,25 @@ int __init omap_intc_of_init(struct device_node *node, return -EINVAL; } - if (of_property_read_u32(node, "ti,intc-size", &nr_irqs)) - pr_warn("unable to get intc-size, default to %d\n", nr_irqs); + if (of_property_read_u32(node, "ti,intc-size", &nr_irq)) + pr_warn("unable to get intc-size, default to %d\n", nr_irq); - omap_init_irq(res.start, nr_irqs, of_node_get(node)); + omap_init_irq(res.start, nr_irq, of_node_get(node)); return 0; } -#ifdef CONFIG_ARCH_OMAP3 +static struct of_device_id irq_match[] __initdata = { + { .compatible = "ti,omap2-intc", .data = intc_of_init, }, + { } +}; + +void __init omap_intc_of_init(void) +{ + of_irq_init(irq_match); +} + +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)]; void omap_intc_save_context(void) diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 19b8b677486..6875be837d9 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -83,8 +83,6 @@ static int omap2_mbox_startup(struct omap_mbox *mbox) l = mbox_read_reg(MAILBOX_REVISION); pr_debug("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f)); - omap2_mbox_enable_irq(mbox, IRQ_RX); - return 0; } diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c index ef2a6924731..fb5bc6cf377 100644 --- a/arch/arm/mach-omap2/msdi.c +++ b/arch/arm/mach-omap2/msdi.c @@ -22,11 +22,15 @@ */ #include <linux/kernel.h> +#include <linux/err.h> #include <plat/omap_hwmod.h> +#include <plat/omap_device.h> #include <plat/mmc.h> #include "common.h" +#include "control.h" +#include "mux.h" /* * MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register @@ -86,3 +90,72 @@ int omap_msdi_reset(struct omap_hwmod *oh) return 0; } + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) + +static inline void omap242x_mmc_mux(struct omap_mmc_platform_data + *mmc_controller) +{ + if ((mmc_controller->slots[0].switch_pin > 0) && \ + (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, + OMAP_PIN_INPUT_PULLUP); + if ((mmc_controller->slots[0].gpio_wp > 0) && \ + (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, + OMAP_PIN_INPUT_PULLUP); + + omap_mux_init_signal("sdmmc_cmd", 0); + omap_mux_init_signal("sdmmc_clki", 0); + omap_mux_init_signal("sdmmc_clko", 0); + omap_mux_init_signal("sdmmc_dat0", 0); + omap_mux_init_signal("sdmmc_dat_dir0", 0); + omap_mux_init_signal("sdmmc_cmd_dir", 0); + if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) { + omap_mux_init_signal("sdmmc_dat1", 0); + omap_mux_init_signal("sdmmc_dat2", 0); + omap_mux_init_signal("sdmmc_dat3", 0); + omap_mux_init_signal("sdmmc_dat_dir1", 0); + omap_mux_init_signal("sdmmc_dat_dir2", 0); + omap_mux_init_signal("sdmmc_dat_dir3", 0); + } + + /* + * Use internal loop-back in MMC/SDIO Module Input Clock + * selection + */ + if (mmc_controller->slots[0].internal_clock) { + u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + v |= (1 << 24); + omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); + } +} + +void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) +{ + struct platform_device *pdev; + struct omap_hwmod *oh; + int id = 0; + char *oh_name = "msdi1"; + char *dev_name = "mmci-omap"; + + if (!mmc_data[0]) { + pr_err("%s fails: Incomplete platform data\n", __func__); + return; + } + + omap242x_mmc_mux(mmc_data[0]); + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up %s\n", oh_name); + return; + } + pdev = omap_device_build(dev_name, id, oh, mmc_data[0], + sizeof(struct omap_mmc_platform_data), NULL, 0, 0); + if (IS_ERR(pdev)) + WARN(1, "Can'd build omap_device for %s:%s.\n", + dev_name, oh->name); +} + +#endif diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 503ac777a2b..502e3135aad 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -19,6 +19,27 @@ #include <linux/init.h> __CPUINIT + +/* Physical address needed since MMU not enabled yet on secondary core */ +#define AUX_CORE_BOOT0_PA 0x48281800 + +/* + * OMAP5 specific entry point for secondary CPU to jump from ROM + * code. This routine also provides a holding flag into which + * secondary core is held until we're ready for it to initialise. + * The primary core will update this flag using a hardware ++ * register AuxCoreBoot0. + */ +ENTRY(omap5_secondary_startup) +wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 + ldr r0, [r2] + mov r0, r0, lsr #5 + mrc p15, 0, r4, c0, c0, 5 + and r4, r4, #0x0f + cmp r0, r4 + bne wait + b secondary_startup +END(omap5_secondary_startup) /* * OMAP4 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c index 56c345b8b93..414083b427d 100644 --- a/arch/arm/mach-omap2/omap-hotplug.c +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -17,8 +17,10 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/smp.h> +#include <linux/io.h> #include <asm/cacheflush.h> +#include <mach/omap-wakeupgen.h> #include "common.h" @@ -35,7 +37,8 @@ int platform_cpu_kill(unsigned int cpu) */ void __ref platform_cpu_die(unsigned int cpu) { - unsigned int this_cpu; + unsigned int boot_cpu = 0; + void __iomem *base = omap_get_wakeupgen_base(); flush_cache_all(); dsb(); @@ -43,16 +46,27 @@ void __ref platform_cpu_die(unsigned int cpu) /* * we're ready for shutdown now, so do it */ - if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0) - pr_err("Secure clear status failed\n"); + if (omap_secure_apis_support()) { + if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0) + pr_err("Secure clear status failed\n"); + } else { + __raw_writel(0, base + OMAP_AUX_CORE_BOOT_0); + } + for (;;) { /* * Enter into low power state */ omap4_hotplug_cpu(cpu, PWRDM_POWER_OFF); - this_cpu = smp_processor_id(); - if (omap_read_auxcoreboot0() == this_cpu) { + + if (omap_secure_apis_support()) + boot_cpu = omap_read_auxcoreboot0(); + else + boot_cpu = + __raw_readl(base + OMAP_AUX_CORE_BOOT_0) >> 5; + + if (boot_cpu == smp_processor_id()) { /* * OK, proper wakeup, we're done */ diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index ac49384d028..1be8bcb52e9 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -73,19 +73,17 @@ static struct iommu_device omap4_devices[] = { .da_end = 0xFFFFF000, }, }, -#if defined(CONFIG_MPU_TESLA_IOMMU) { .base = OMAP4_MMU2_BASE, - .irq = INT_44XX_DSP_MMU, + .irq = OMAP44XX_IRQ_TESLA_MMU, .pdata = { .name = "tesla", .nr_tlb_entries = 32, - .clk_name = "tesla_ick", + .clk_name = "dsp_fck", .da_start = 0x0, .da_end = 0xFFFFF000, }, }, -#endif }; #define NR_OMAP4_IOMMU_DEVICES ARRAY_SIZE(omap4_devices) static struct platform_device *omap4_iommu_pdev[NR_OMAP4_IOMMU_DEVICES]; diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 13670aa84e5..637a1bdf2ac 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -255,7 +255,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) return -ENXIO; } - pwrdm_pre_transition(); + pwrdm_pre_transition(NULL); /* * Check MPUSS next state and save interrupt controller if needed. @@ -287,7 +287,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) wakeup_cpu = smp_processor_id(); set_cpu_next_pwrst(wakeup_cpu, PWRDM_POWER_ON); - pwrdm_post_transition(); + pwrdm_post_transition(NULL); return 0; } @@ -313,7 +313,7 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) scu_pwrst_prepare(cpu, power_state); /* - * CPU never retuns back if targetted power state is OFF mode. + * CPU never retuns back if targeted power state is OFF mode. * CPU ONLINE follows normal CPU ONLINE ptah via * omap_secondary_startup(). */ diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index deffbf1c962..7d118b9bdd5 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -26,11 +26,19 @@ #include <mach/hardware.h> #include <mach/omap-secure.h> +#include <mach/omap-wakeupgen.h> +#include <asm/cputype.h> #include "iomap.h" #include "common.h" #include "clockdomain.h" +#define CPU_MASK 0xff0ffff0 +#define CPU_CORTEX_A9 0x410FC090 +#define CPU_CORTEX_A15 0x410FC0F0 + +#define OMAP5_CORE_COUNT 0x2 + /* SCU base address */ static void __iomem *scu_base; @@ -73,6 +81,8 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) { static struct clockdomain *cpu1_clkdm; static bool booted; + void __iomem *base = omap_get_wakeupgen_base(); + /* * Set synchronisation state between this boot processor * and the secondary one @@ -85,7 +95,11 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * the AuxCoreBoot1 register is updated with cpu state * A barrier is added to ensure that write buffer is drained */ - omap_modify_auxcoreboot0(0x200, 0xfffffdff); + if (omap_secure_apis_support()) + omap_modify_auxcoreboot0(0x200, 0xfffffdff); + else + __raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0); + flush_cache_all(); smp_wmb(); @@ -124,13 +138,19 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) static void __init wakeup_secondary(void) { + void __iomem *base = omap_get_wakeupgen_base(); /* * Write the address of secondary startup routine into the * AuxCoreBoot1 where ROM code will jump and start executing * on secondary core once out of WFE * A barrier is added to ensure that write buffer is drained */ - omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup)); + if (omap_secure_apis_support()) + omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup)); + else + __raw_writel(virt_to_phys(omap5_secondary_startup), + base + OMAP_AUX_CORE_BOOT_1); + smp_wmb(); /* @@ -147,16 +167,21 @@ static void __init wakeup_secondary(void) */ void __init smp_init_cpus(void) { - unsigned int i, ncores; - - /* - * Currently we can't call ioremap here because - * SoC detection won't work until after init_early. - */ - scu_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_SCU_BASE); - BUG_ON(!scu_base); - - ncores = scu_get_core_count(scu_base); + unsigned int i = 0, ncores = 1, cpu_id; + + /* Use ARM cpuid check here, as SoC detection will not work so early */ + cpu_id = read_cpuid(CPUID_ID) & CPU_MASK; + if (cpu_id == CPU_CORTEX_A9) { + /* + * Currently we can't call ioremap here because + * SoC detection won't work until after init_early. + */ + scu_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_SCU_BASE); + BUG_ON(!scu_base); + ncores = scu_get_core_count(scu_base); + } else if (cpu_id == CPU_CORTEX_A15) { + ncores = OMAP5_CORE_COUNT; + } /* sanity check */ if (ncores > nr_cpu_ids) { @@ -178,6 +203,7 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * Initialise the SCU and wake up the secondary core using * wakeup_secondary(). */ - scu_enable(scu_base); + if (scu_base) + scu_enable(scu_base); wakeup_secondary(); } diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index d811c779035..05fdebfaa19 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -33,18 +33,23 @@ #include "omap4-sar-layout.h" #include "common.h" -#define NR_REG_BANKS 4 -#define MAX_IRQS 128 +#define MAX_NR_REG_BANKS 5 +#define MAX_IRQS 160 #define WKG_MASK_ALL 0x00000000 #define WKG_UNMASK_ALL 0xffffffff #define CPU_ENA_OFFSET 0x400 #define CPU0_ID 0x0 #define CPU1_ID 0x1 +#define OMAP4_NR_BANKS 4 +#define OMAP4_NR_IRQS 128 static void __iomem *wakeupgen_base; static void __iomem *sar_base; static DEFINE_SPINLOCK(wakeupgen_lock); static unsigned int irq_target_cpu[NR_IRQS]; +static unsigned int irq_banks = MAX_NR_REG_BANKS; +static unsigned int max_irqs = MAX_IRQS; +static unsigned int omap_secure_apis; /* * Static helper functions. @@ -146,13 +151,13 @@ static void wakeupgen_unmask(struct irq_data *d) } #ifdef CONFIG_HOTPLUG_CPU -static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks); +static DEFINE_PER_CPU(u32 [MAX_NR_REG_BANKS], irqmasks); static void _wakeupgen_save_masks(unsigned int cpu) { u8 i; - for (i = 0; i < NR_REG_BANKS; i++) + for (i = 0; i < irq_banks; i++) per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu); } @@ -160,7 +165,7 @@ static void _wakeupgen_restore_masks(unsigned int cpu) { u8 i; - for (i = 0; i < NR_REG_BANKS; i++) + for (i = 0; i < irq_banks; i++) wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu); } @@ -168,7 +173,7 @@ static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg) { u8 i; - for (i = 0; i < NR_REG_BANKS; i++) + for (i = 0; i < irq_banks; i++) wakeupgen_writel(reg, i, cpu); } @@ -196,25 +201,14 @@ static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set) #endif #ifdef CONFIG_CPU_PM -/* - * Save WakeupGen interrupt context in SAR BANK3. Restore is done by - * ROM code. WakeupGen IP is integrated along with GIC to manage the - * interrupt wakeups from CPU low power states. It manages - * masking/unmasking of Shared peripheral interrupts(SPI). So the - * interrupt enable/disable control should be in sync and consistent - * at WakeupGen and GIC so that interrupts are not lost. - */ -static void irq_save_context(void) +static inline void omap4_irq_save_context(void) { u32 i, val; if (omap_rev() == OMAP4430_REV_ES1_0) return; - if (!sar_base) - sar_base = omap4_get_sar_ram_base(); - - for (i = 0; i < NR_REG_BANKS; i++) { + for (i = 0; i < irq_banks; i++) { /* Save the CPUx interrupt mask for IRQ 0 to 127 */ val = wakeupgen_readl(i, 0); sar_writel(val, WAKEUPGENENB_OFFSET_CPU0, i); @@ -254,6 +248,53 @@ static void irq_save_context(void) val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET); val |= SAR_BACKUP_STATUS_WAKEUPGEN; __raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET); + +} + +static inline void omap5_irq_save_context(void) +{ + u32 i, val; + + for (i = 0; i < irq_banks; i++) { + /* Save the CPUx interrupt mask for IRQ 0 to 159 */ + val = wakeupgen_readl(i, 0); + sar_writel(val, OMAP5_WAKEUPGENENB_OFFSET_CPU0, i); + val = wakeupgen_readl(i, 1); + sar_writel(val, OMAP5_WAKEUPGENENB_OFFSET_CPU1, i); + sar_writel(0x0, OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0, i); + sar_writel(0x0, OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1, i); + } + + /* Save AuxBoot* registers */ + val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); + __raw_writel(val, sar_base + OMAP5_AUXCOREBOOT0_OFFSET); + val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); + __raw_writel(val, sar_base + OMAP5_AUXCOREBOOT1_OFFSET); + + /* Set the Backup Bit Mask status */ + val = __raw_readl(sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET); + val |= SAR_BACKUP_STATUS_WAKEUPGEN; + __raw_writel(val, sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET); + +} + +/* + * Save WakeupGen interrupt context in SAR BANK3. Restore is done by + * ROM code. WakeupGen IP is integrated along with GIC to manage the + * interrupt wakeups from CPU low power states. It manages + * masking/unmasking of Shared peripheral interrupts(SPI). So the + * interrupt enable/disable control should be in sync and consistent + * at WakeupGen and GIC so that interrupts are not lost. + */ +static void irq_save_context(void) +{ + if (!sar_base) + sar_base = omap4_get_sar_ram_base(); + + if (soc_is_omap54xx()) + omap5_irq_save_context(); + else + omap4_irq_save_context(); } /* @@ -262,9 +303,14 @@ static void irq_save_context(void) static void irq_sar_clear(void) { u32 val; - val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET); + u32 offset = SAR_BACKUP_STATUS_OFFSET; + + if (soc_is_omap54xx()) + offset = OMAP5_SAR_BACKUP_STATUS_OFFSET; + + val = __raw_readl(sar_base + offset); val &= ~SAR_BACKUP_STATUS_WAKEUPGEN; - __raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET); + __raw_writel(val, sar_base + offset); } /* @@ -336,13 +382,25 @@ static struct notifier_block irq_notifier_block = { static void __init irq_pm_init(void) { - cpu_pm_register_notifier(&irq_notifier_block); + /* FIXME: Remove this when MPU OSWR support is added */ + if (!soc_is_omap54xx()) + cpu_pm_register_notifier(&irq_notifier_block); } #else static void __init irq_pm_init(void) {} #endif +void __iomem *omap_get_wakeupgen_base(void) +{ + return wakeupgen_base; +} + +int omap_secure_apis_support(void) +{ + return omap_secure_apis; +} + /* * Initialise the wakeupgen module. */ @@ -358,12 +416,18 @@ int __init omap_wakeupgen_init(void) } /* Static mapping, never released */ - wakeupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K); + wakeupgen_base = ioremap(OMAP_WKUPGEN_BASE, SZ_4K); if (WARN_ON(!wakeupgen_base)) return -ENOMEM; + if (cpu_is_omap44xx()) { + irq_banks = OMAP4_NR_BANKS; + max_irqs = OMAP4_NR_IRQS; + omap_secure_apis = 1; + } + /* Clear all IRQ bitmasks at wakeupGen level */ - for (i = 0; i < NR_REG_BANKS; i++) { + for (i = 0; i < irq_banks; i++) { wakeupgen_writel(0, i, CPU0_ID); wakeupgen_writel(0, i, CPU1_ID); } @@ -382,7 +446,7 @@ int __init omap_wakeupgen_init(void) */ /* Associate all the IRQs to boot CPU like GIC init does. */ - for (i = 0; i < NR_IRQS; i++) + for (i = 0; i < max_irqs; i++) irq_target_cpu[i] = boot_cpu; irq_hotplug_init(); diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index a8161e5f320..c29dee998a7 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -21,6 +21,8 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> #include <asm/memblock.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> #include <plat/irqs.h> #include <plat/sram.h> @@ -210,6 +212,18 @@ static int __init omap4_sar_ram_init(void) } early_initcall(omap4_sar_ram_init); +static struct of_device_id irq_match[] __initdata = { + { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, }, + { } +}; + +void __init omap_gic_of_init(void) +{ + omap_wakeupgen_init(); + of_irq_init(irq_match); +} + #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) static int omap4_twl6030_hsmmc_late_init(struct device *dev) { diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h index fe5b545ad44..e170fe803b0 100644 --- a/arch/arm/mach-omap2/omap4-sar-layout.h +++ b/arch/arm/mach-omap2/omap4-sar-layout.h @@ -12,7 +12,7 @@ #define OMAP_ARCH_OMAP4_SAR_LAYOUT_H /* - * SAR BANK offsets from base address OMAP44XX_SAR_RAM_BASE + * SAR BANK offsets from base address OMAP44XX/54XX_SAR_RAM_BASE */ #define SAR_BANK1_OFFSET 0x0000 #define SAR_BANK2_OFFSET 0x1000 @@ -47,4 +47,14 @@ #define PTMSYNCREQ_EN_OFFSET (SAR_BANK3_OFFSET + 0x6d0) #define SAR_BACKUP_STATUS_WAKEUPGEN 0x10 +/* WakeUpGen save restore offset from OMAP54XX_SAR_RAM_BASE */ +#define OMAP5_WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8d4) +#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8e8) +#define OMAP5_WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x8fc) +#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x910) +#define OMAP5_AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0x924) +#define OMAP5_AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x928) +#define OMAP5_AMBA_IF_MODE_OFFSET (SAR_BANK3_OFFSET + 0x92c) +#define OMAP5_SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x800) + #endif diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 2d710f50fca..6ca8e519968 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -153,6 +153,7 @@ #include "prm44xx.h" #include "prminst44xx.h" #include "mux.h" +#include "pm.h" /* Maximum microseconds to wait for OMAP module to softreset */ #define MAX_MODULE_SOFTRESET_WAIT 10000 @@ -166,12 +167,40 @@ */ #define LINKS_PER_OCP_IF 2 +/** + * struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations + * @enable_module: function to enable a module (via MODULEMODE) + * @disable_module: function to disable a module (via MODULEMODE) + * + * XXX Eventually this functionality will be hidden inside the PRM/CM + * device drivers. Until then, this should avoid huge blocks of cpu_is_*() + * conditionals in this code. + */ +struct omap_hwmod_soc_ops { + void (*enable_module)(struct omap_hwmod *oh); + int (*disable_module)(struct omap_hwmod *oh); + int (*wait_target_ready)(struct omap_hwmod *oh); + int (*assert_hardreset)(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri); + int (*deassert_hardreset)(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri); + int (*is_hardreset_asserted)(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri); + int (*init_clkdm)(struct omap_hwmod *oh); +}; + +/* soc_ops: adapts the omap_hwmod code to the currently-booted SoC */ +static struct omap_hwmod_soc_ops soc_ops; + /* omap_hwmod_list contains all registered struct omap_hwmods */ static LIST_HEAD(omap_hwmod_list); /* mpu_oh: used to add/remove MPU initiator from sleepdep list */ static struct omap_hwmod *mpu_oh; +/* io_chain_lock: used to serialize reconfigurations of the I/O chain */ +static DEFINE_SPINLOCK(io_chain_lock); + /* * linkspace: ptr to a buffer that struct omap_hwmod_link records are * allocated from - used to reduce the number of small memory @@ -186,6 +215,9 @@ static struct omap_hwmod_link *linkspace; */ static unsigned short free_ls, max_ls, ls_supp; +/* inited: set to true once the hwmod code is initialized */ +static bool inited; + /* Private functions */ /** @@ -388,6 +420,49 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v) } /** + * _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v + * @oh: struct omap_hwmod * + * + * The DMADISABLE bit is a semi-automatic bit present in sysconfig register + * of some modules. When the DMA must perform read/write accesses, the + * DMADISABLE bit is cleared by the hardware. But when the DMA must stop + * for power management, software must set the DMADISABLE bit back to 1. + * + * Set the DMADISABLE bit in @v for hwmod @oh. Returns -EINVAL upon + * error or 0 upon success. + */ +static int _set_dmadisable(struct omap_hwmod *oh) +{ + u32 v; + u32 dmadisable_mask; + + if (!oh->class->sysc || + !(oh->class->sysc->sysc_flags & SYSC_HAS_DMADISABLE)) + return -EINVAL; + + if (!oh->class->sysc->sysc_fields) { + WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name); + return -EINVAL; + } + + /* clocks must be on for this operation */ + if (oh->_state != _HWMOD_STATE_ENABLED) { + pr_warn("omap_hwmod: %s: dma can be disabled only from enabled state\n", oh->name); + return -EINVAL; + } + + pr_debug("omap_hwmod: %s: setting DMADISABLE\n", oh->name); + + v = oh->_sysc_cache; + dmadisable_mask = + (0x1 << oh->class->sysc->sysc_fields->dmadisable_shift); + v |= dmadisable_mask; + _write_sysconfig(v, oh); + + return 0; +} + +/** * _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v * @oh: struct omap_hwmod * * @autoidle: desired AUTOIDLE bitfield value (0 or 1) @@ -771,23 +846,19 @@ static void _disable_optional_clocks(struct omap_hwmod *oh) } /** - * _enable_module - enable CLKCTRL modulemode on OMAP4 + * _omap4_enable_module - enable CLKCTRL modulemode on OMAP4 * @oh: struct omap_hwmod * * * Enables the PRCM module mode related to the hwmod @oh. * No return value. */ -static void _enable_module(struct omap_hwmod *oh) +static void _omap4_enable_module(struct omap_hwmod *oh) { - /* The module mode does not exist prior OMAP4 */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - return; - if (!oh->clkdm || !oh->prcm.omap4.modulemode) return; - pr_debug("omap_hwmod: %s: _enable_module: %d\n", - oh->name, oh->prcm.omap4.modulemode); + pr_debug("omap_hwmod: %s: %s: %d\n", + oh->name, __func__, oh->prcm.omap4.modulemode); omap4_cminst_module_enable(oh->prcm.omap4.modulemode, oh->clkdm->prcm_partition, @@ -807,10 +878,7 @@ static void _enable_module(struct omap_hwmod *oh) */ static int _omap4_wait_target_disable(struct omap_hwmod *oh) { - if (!cpu_is_omap44xx()) - return 0; - - if (!oh) + if (!oh || !oh->clkdm) return -EINVAL; if (oh->_int_flags & _HWMOD_NO_MPU_PORT) @@ -1301,24 +1369,20 @@ static struct omap_hwmod *_lookup(const char *name) return oh; } + /** * _init_clkdm - look up a clockdomain name, store pointer in omap_hwmod * @oh: struct omap_hwmod * * * Convert a clockdomain name stored in a struct omap_hwmod into a * clockdomain pointer, and save it into the struct omap_hwmod. - * return -EINVAL if clkdm_name does not exist or if the lookup failed. + * Return -EINVAL if the clkdm_name lookup failed. */ static int _init_clkdm(struct omap_hwmod *oh) { - if (cpu_is_omap24xx() || cpu_is_omap34xx()) + if (!oh->clkdm_name) return 0; - if (!oh->clkdm_name) { - pr_warning("omap_hwmod: %s: no clkdm_name\n", oh->name); - return -EINVAL; - } - oh->clkdm = clkdm_lookup(oh->clkdm_name); if (!oh->clkdm) { pr_warning("omap_hwmod: %s: could not associate to clkdm %s\n", @@ -1354,7 +1418,8 @@ static int _init_clocks(struct omap_hwmod *oh, void *data) ret |= _init_main_clk(oh); ret |= _init_interface_clks(oh); ret |= _init_opt_clks(oh); - ret |= _init_clkdm(oh); + if (soc_ops.init_clkdm) + ret |= soc_ops.init_clkdm(oh); if (!ret) oh->_state = _HWMOD_STATE_CLKS_INITED; @@ -1365,53 +1430,6 @@ static int _init_clocks(struct omap_hwmod *oh, void *data) } /** - * _wait_target_ready - wait for a module to leave slave idle - * @oh: struct omap_hwmod * - * - * Wait for a module @oh to leave slave idle. Returns 0 if the module - * does not have an IDLEST bit or if the module successfully leaves - * slave idle; otherwise, pass along the return value of the - * appropriate *_cm*_wait_module_ready() function. - */ -static int _wait_target_ready(struct omap_hwmod *oh) -{ - struct omap_hwmod_ocp_if *os; - int ret; - - if (!oh) - return -EINVAL; - - if (oh->flags & HWMOD_NO_IDLEST) - return 0; - - os = _find_mpu_rt_port(oh); - if (!os) - return 0; - - /* XXX check module SIDLEMODE */ - - /* XXX check clock enable states */ - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - ret = omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs, - oh->prcm.omap2.idlest_reg_id, - oh->prcm.omap2.idlest_idle_bit); - } else if (cpu_is_omap44xx()) { - if (!oh->clkdm) - return -EINVAL; - - ret = omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition, - oh->clkdm->cm_inst, - oh->clkdm->clkdm_offs, - oh->prcm.omap4.clkctrl_offs); - } else { - BUG(); - }; - - return ret; -} - -/** * _lookup_hardreset - fill register bit info for this hwmod/reset line * @oh: struct omap_hwmod * * @name: name of the reset line in the context of this hwmod @@ -1447,32 +1465,31 @@ static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name, * @oh: struct omap_hwmod * * @name: name of the reset line to lookup and assert * - * Some IP like dsp, ipu or iva contain processor that require - * an HW reset line to be assert / deassert in order to enable fully - * the IP. + * Some IP like dsp, ipu or iva contain processor that require an HW + * reset line to be assert / deassert in order to enable fully the IP. + * Returns -EINVAL if @oh is null, -ENOSYS if we have no way of + * asserting the hardreset line on the currently-booted SoC, or passes + * along the return value from _lookup_hardreset() or the SoC's + * assert_hardreset code. */ static int _assert_hardreset(struct omap_hwmod *oh, const char *name) { struct omap_hwmod_rst_info ohri; - u8 ret; + u8 ret = -EINVAL; if (!oh) return -EINVAL; + if (!soc_ops.assert_hardreset) + return -ENOSYS; + ret = _lookup_hardreset(oh, name, &ohri); if (IS_ERR_VALUE(ret)) return ret; - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs, - ohri.rst_shift); - else if (cpu_is_omap44xx()) - return omap4_prminst_assert_hardreset(ohri.rst_shift, - oh->clkdm->pwrdm.ptr->prcm_partition, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); - else - return -EINVAL; + ret = soc_ops.assert_hardreset(oh, &ohri); + + return ret; } /** @@ -1481,38 +1498,29 @@ static int _assert_hardreset(struct omap_hwmod *oh, const char *name) * @oh: struct omap_hwmod * * @name: name of the reset line to look up and deassert * - * Some IP like dsp, ipu or iva contain processor that require - * an HW reset line to be assert / deassert in order to enable fully - * the IP. + * Some IP like dsp, ipu or iva contain processor that require an HW + * reset line to be assert / deassert in order to enable fully the IP. + * Returns -EINVAL if @oh is null, -ENOSYS if we have no way of + * deasserting the hardreset line on the currently-booted SoC, or passes + * along the return value from _lookup_hardreset() or the SoC's + * deassert_hardreset code. */ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) { struct omap_hwmod_rst_info ohri; - int ret; + int ret = -EINVAL; if (!oh) return -EINVAL; + if (!soc_ops.deassert_hardreset) + return -ENOSYS; + ret = _lookup_hardreset(oh, name, &ohri); if (IS_ERR_VALUE(ret)) return ret; - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - ret = omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs, - ohri.rst_shift, - ohri.st_shift); - } else if (cpu_is_omap44xx()) { - if (ohri.st_shift) - pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n", - oh->name, name); - ret = omap4_prminst_deassert_hardreset(ohri.rst_shift, - oh->clkdm->pwrdm.ptr->prcm_partition, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); - } else { - return -EINVAL; - } - + ret = soc_ops.deassert_hardreset(oh, &ohri); if (ret == -EBUSY) pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name); @@ -1525,31 +1533,28 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) * @oh: struct omap_hwmod * * @name: name of the reset line to look up and read * - * Return the state of the reset line. + * Return the state of the reset line. Returns -EINVAL if @oh is + * null, -ENOSYS if we have no way of reading the hardreset line + * status on the currently-booted SoC, or passes along the return + * value from _lookup_hardreset() or the SoC's is_hardreset_asserted + * code. */ static int _read_hardreset(struct omap_hwmod *oh, const char *name) { struct omap_hwmod_rst_info ohri; - u8 ret; + u8 ret = -EINVAL; if (!oh) return -EINVAL; + if (!soc_ops.is_hardreset_asserted) + return -ENOSYS; + ret = _lookup_hardreset(oh, name, &ohri); if (IS_ERR_VALUE(ret)) return ret; - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs, - ohri.st_shift); - } else if (cpu_is_omap44xx()) { - return omap4_prminst_is_hardreset_asserted(ohri.rst_shift, - oh->clkdm->pwrdm.ptr->prcm_partition, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); - } else { - return -EINVAL; - } + return soc_ops.is_hardreset_asserted(oh, &ohri); } /** @@ -1587,10 +1592,6 @@ static int _omap4_disable_module(struct omap_hwmod *oh) { int v; - /* The module mode does not exist prior OMAP4 */ - if (!cpu_is_omap44xx()) - return -EINVAL; - if (!oh->clkdm || !oh->prcm.omap4.modulemode) return -EINVAL; @@ -1714,11 +1715,17 @@ dis_opt_clks: * therefore have no OCP header registers to access. Others (like the * IVA) have idiosyncratic reset sequences. So for these relatively * rare cases, custom reset code can be supplied in the struct - * omap_hwmod_class .reset function pointer. Passes along the return - * value from either _ocp_softreset() or the custom reset function - - * these must return -EINVAL if the hwmod cannot be reset this way or - * if the hwmod is in the wrong state, -ETIMEDOUT if the module did - * not reset in time, or 0 upon success. + * omap_hwmod_class .reset function pointer. + * + * _set_dmadisable() is called to set the DMADISABLE bit so that it + * does not prevent idling of the system. This is necessary for cases + * where ROMCODE/BOOTLOADER uses dma and transfers control to the + * kernel without disabling dma. + * + * Passes along the return value from either _ocp_softreset() or the + * custom reset function - these must return -EINVAL if the hwmod + * cannot be reset this way or if the hwmod is in the wrong state, + * -ETIMEDOUT if the module did not reset in time, or 0 upon success. */ static int _reset(struct omap_hwmod *oh) { @@ -1740,6 +1747,8 @@ static int _reset(struct omap_hwmod *oh) } } + _set_dmadisable(oh); + /* * OCP_SYSCONFIG bits need to be reprogrammed after a * softreset. The _enable() function should be split to avoid @@ -1754,6 +1763,32 @@ static int _reset(struct omap_hwmod *oh) } /** + * _reconfigure_io_chain - clear any I/O chain wakeups and reconfigure chain + * + * Call the appropriate PRM function to clear any logged I/O chain + * wakeups and to reconfigure the chain. This apparently needs to be + * done upon every mux change. Since hwmods can be concurrently + * enabled and idled, hold a spinlock around the I/O chain + * reconfiguration sequence. No return value. + * + * XXX When the PRM code is moved to drivers, this function can be removed, + * as the PRM infrastructure should abstract this. + */ +static void _reconfigure_io_chain(void) +{ + unsigned long flags; + + spin_lock_irqsave(&io_chain_lock, flags); + + if (cpu_is_omap34xx() && omap3_has_io_chain_ctrl()) + omap3xxx_prm_reconfigure_io_chain(); + else if (cpu_is_omap44xx()) + omap44xx_prm_reconfigure_io_chain(); + + spin_unlock_irqrestore(&io_chain_lock, flags); +} + +/** * _enable - enable an omap_hwmod * @oh: struct omap_hwmod * * @@ -1809,8 +1844,10 @@ static int _enable(struct omap_hwmod *oh) /* Mux pins for device runtime if populated */ if (oh->mux && (!oh->mux->enabled || ((oh->_state == _HWMOD_STATE_IDLE) && - oh->mux->pads_dynamic))) + oh->mux->pads_dynamic))) { omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED); + _reconfigure_io_chain(); + } _add_initiator_dep(oh, mpu_oh); @@ -1830,9 +1867,11 @@ static int _enable(struct omap_hwmod *oh) } _enable_clocks(oh); - _enable_module(oh); + if (soc_ops.enable_module) + soc_ops.enable_module(oh); - r = _wait_target_ready(oh); + r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) : + -EINVAL; if (!r) { /* * Set the clockdomain to HW_AUTO only if the target is ready, @@ -1886,7 +1925,8 @@ static int _idle(struct omap_hwmod *oh) _idle_sysc(oh); _del_initiator_dep(oh, mpu_oh); - _omap4_disable_module(oh); + if (soc_ops.disable_module) + soc_ops.disable_module(oh); /* * The module must be in idle mode before disabling any parents @@ -1899,8 +1939,10 @@ static int _idle(struct omap_hwmod *oh) clkdm_hwmod_disable(oh->clkdm, oh); /* Mux pins for device idle if populated */ - if (oh->mux && oh->mux->pads_dynamic) + if (oh->mux && oh->mux->pads_dynamic) { omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE); + _reconfigure_io_chain(); + } oh->_state = _HWMOD_STATE_IDLE; @@ -1991,7 +2033,8 @@ static int _shutdown(struct omap_hwmod *oh) if (oh->_state == _HWMOD_STATE_ENABLED) { _del_initiator_dep(oh, mpu_oh); /* XXX what about the other system initiators here? dma, dsp */ - _omap4_disable_module(oh); + if (soc_ops.disable_module) + soc_ops.disable_module(oh); _disable_clocks(oh); if (oh->clkdm) clkdm_hwmod_disable(oh->clkdm, oh); @@ -2447,6 +2490,194 @@ static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois) return 0; } +/* Static functions intended only for use in soc_ops field function pointers */ + +/** + * _omap2_wait_target_ready - wait for a module to leave slave idle + * @oh: struct omap_hwmod * + * + * Wait for a module @oh to leave slave idle. Returns 0 if the module + * does not have an IDLEST bit or if the module successfully leaves + * slave idle; otherwise, pass along the return value of the + * appropriate *_cm*_wait_module_ready() function. + */ +static int _omap2_wait_target_ready(struct omap_hwmod *oh) +{ + if (!oh) + return -EINVAL; + + if (oh->flags & HWMOD_NO_IDLEST) + return 0; + + if (!_find_mpu_rt_port(oh)) + return 0; + + /* XXX check module SIDLEMODE, hardreset status, enabled clocks */ + + return omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs, + oh->prcm.omap2.idlest_reg_id, + oh->prcm.omap2.idlest_idle_bit); +} + +/** + * _omap4_wait_target_ready - wait for a module to leave slave idle + * @oh: struct omap_hwmod * + * + * Wait for a module @oh to leave slave idle. Returns 0 if the module + * does not have an IDLEST bit or if the module successfully leaves + * slave idle; otherwise, pass along the return value of the + * appropriate *_cm*_wait_module_ready() function. + */ +static int _omap4_wait_target_ready(struct omap_hwmod *oh) +{ + if (!oh || !oh->clkdm) + return -EINVAL; + + if (oh->flags & HWMOD_NO_IDLEST) + return 0; + + if (!_find_mpu_rt_port(oh)) + return 0; + + /* XXX check module SIDLEMODE, hardreset status */ + + return omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition, + oh->clkdm->cm_inst, + oh->clkdm->clkdm_offs, + oh->prcm.omap4.clkctrl_offs); +} + +/** + * _omap2_assert_hardreset - call OMAP2 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to assert hardreset + * @ohri: hardreset line data + * + * Call omap2_prm_assert_hardreset() with parameters extracted from + * the hwmod @oh and the hardreset line data @ohri. Only intended for + * use as an soc_ops function pointer. Passes along the return value + * from omap2_prm_assert_hardreset(). XXX This function is scheduled + * for removal when the PRM code is moved into drivers/. + */ +static int _omap2_assert_hardreset(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs, + ohri->rst_shift); +} + +/** + * _omap2_deassert_hardreset - call OMAP2 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to deassert hardreset + * @ohri: hardreset line data + * + * Call omap2_prm_deassert_hardreset() with parameters extracted from + * the hwmod @oh and the hardreset line data @ohri. Only intended for + * use as an soc_ops function pointer. Passes along the return value + * from omap2_prm_deassert_hardreset(). XXX This function is + * scheduled for removal when the PRM code is moved into drivers/. + */ +static int _omap2_deassert_hardreset(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + return omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs, + ohri->rst_shift, + ohri->st_shift); +} + +/** + * _omap2_is_hardreset_asserted - call OMAP2 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to test hardreset + * @ohri: hardreset line data + * + * Call omap2_prm_is_hardreset_asserted() with parameters extracted + * from the hwmod @oh and the hardreset line data @ohri. Only + * intended for use as an soc_ops function pointer. Passes along the + * return value from omap2_prm_is_hardreset_asserted(). XXX This + * function is scheduled for removal when the PRM code is moved into + * drivers/. + */ +static int _omap2_is_hardreset_asserted(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs, + ohri->st_shift); +} + +/** + * _omap4_assert_hardreset - call OMAP4 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to assert hardreset + * @ohri: hardreset line data + * + * Call omap4_prminst_assert_hardreset() with parameters extracted + * from the hwmod @oh and the hardreset line data @ohri. Only + * intended for use as an soc_ops function pointer. Passes along the + * return value from omap4_prminst_assert_hardreset(). XXX This + * function is scheduled for removal when the PRM code is moved into + * drivers/. + */ +static int _omap4_assert_hardreset(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + if (!oh->clkdm) + return -EINVAL; + + return omap4_prminst_assert_hardreset(ohri->rst_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); +} + +/** + * _omap4_deassert_hardreset - call OMAP4 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to deassert hardreset + * @ohri: hardreset line data + * + * Call omap4_prminst_deassert_hardreset() with parameters extracted + * from the hwmod @oh and the hardreset line data @ohri. Only + * intended for use as an soc_ops function pointer. Passes along the + * return value from omap4_prminst_deassert_hardreset(). XXX This + * function is scheduled for removal when the PRM code is moved into + * drivers/. + */ +static int _omap4_deassert_hardreset(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + if (!oh->clkdm) + return -EINVAL; + + if (ohri->st_shift) + pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n", + oh->name, ohri->name); + return omap4_prminst_deassert_hardreset(ohri->rst_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); +} + +/** + * _omap4_is_hardreset_asserted - call OMAP4 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to test hardreset + * @ohri: hardreset line data + * + * Call omap4_prminst_is_hardreset_asserted() with parameters + * extracted from the hwmod @oh and the hardreset line data @ohri. + * Only intended for use as an soc_ops function pointer. Passes along + * the return value from omap4_prminst_is_hardreset_asserted(). XXX + * This function is scheduled for removal when the PRM code is moved + * into drivers/. + */ +static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + if (!oh->clkdm) + return -EINVAL; + + return omap4_prminst_is_hardreset_asserted(ohri->rst_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); +} + /* Public functions */ u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs) @@ -2579,12 +2810,18 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), * * Intended to be called early in boot before the clock framework is * initialized. If @ois is not null, will register all omap_hwmods - * listed in @ois that are valid for this chip. Returns 0. + * listed in @ois that are valid for this chip. Returns -EINVAL if + * omap_hwmod_init() hasn't been called before calling this function, + * -ENOMEM if the link memory area can't be allocated, or 0 upon + * success. */ int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois) { int r, i; + if (!inited) + return -EINVAL; + if (!ois) return 0; @@ -3417,3 +3654,47 @@ int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx) return 0; } + +/** + * omap_hwmod_init - initialize the hwmod code + * + * Sets up some function pointers needed by the hwmod code to operate on the + * currently-booted SoC. Intended to be called once during kernel init + * before any hwmods are registered. No return value. + */ +void __init omap_hwmod_init(void) +{ + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { + soc_ops.wait_target_ready = _omap2_wait_target_ready; + soc_ops.assert_hardreset = _omap2_assert_hardreset; + soc_ops.deassert_hardreset = _omap2_deassert_hardreset; + soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted; + } else if (cpu_is_omap44xx() || soc_is_omap54xx()) { + soc_ops.enable_module = _omap4_enable_module; + soc_ops.disable_module = _omap4_disable_module; + soc_ops.wait_target_ready = _omap4_wait_target_ready; + soc_ops.assert_hardreset = _omap4_assert_hardreset; + soc_ops.deassert_hardreset = _omap4_deassert_hardreset; + soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; + soc_ops.init_clkdm = _init_clkdm; + } else { + WARN(1, "omap_hwmod: unknown SoC type\n"); + } + + inited = true; +} + +/** + * omap_hwmod_get_main_clk - get pointer to main clock name + * @oh: struct omap_hwmod * + * + * Returns the main clock name assocated with @oh upon success, + * or NULL if @oh is NULL. + */ +const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh) +{ + if (!oh) + return NULL; + + return oh->main_clk; +} diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index a7640d1b215..50cfab61b0e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -192,6 +192,11 @@ static struct omap_hwmod_class omap2420_mcbsp_hwmod_class = { .name = "mcbsp", }; +static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = { + { .role = "pad_fck", .clk = "mcbsp_clks" }, + { .role = "prcm_fck", .clk = "func_96m_ck" }, +}; + /* mcbsp1 */ static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = { { .name = "tx", .irq = 59 }, @@ -214,6 +219,8 @@ static struct omap_hwmod omap2420_mcbsp1_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp2 */ @@ -238,6 +245,8 @@ static struct omap_hwmod omap2420_mcbsp2_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; static struct omap_hwmod_class_sysconfig omap2420_msdi_sysc = { @@ -585,5 +594,6 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { int __init omap2420_hwmod_init(void) { + omap_hwmod_init(); return omap_hwmod_register_links(omap2420_hwmod_ocp_ifs); } diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 4d726498123..58b5bc196d3 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -296,6 +296,11 @@ static struct omap_hwmod_class omap2430_mcbsp_hwmod_class = { .rev = MCBSP_CONFIG_TYPE2, }; +static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = { + { .role = "pad_fck", .clk = "mcbsp_clks" }, + { .role = "prcm_fck", .clk = "func_96m_ck" }, +}; + /* mcbsp1 */ static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = { { .name = "tx", .irq = 59 }, @@ -320,6 +325,8 @@ static struct omap_hwmod omap2430_mcbsp1_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp2 */ @@ -345,6 +352,8 @@ static struct omap_hwmod omap2430_mcbsp2_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp3 */ @@ -370,6 +379,8 @@ static struct omap_hwmod omap2430_mcbsp3_hwmod = { .idlest_idle_bit = OMAP2430_ST_MCBSP3_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp4 */ @@ -401,6 +412,8 @@ static struct omap_hwmod omap2430_mcbsp4_hwmod = { .idlest_idle_bit = OMAP2430_ST_MCBSP4_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp5 */ @@ -432,6 +445,8 @@ static struct omap_hwmod omap2430_mcbsp5_hwmod = { .idlest_idle_bit = OMAP2430_ST_MCBSP5_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* MMC/SD/SDIO common */ @@ -938,5 +953,6 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = { int __init omap2430_hwmod_init(void) { + omap_hwmod_init(); return omap_hwmod_register_links(omap2430_hwmod_ocp_ifs); } diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 83eafd96eca..afad69c6ba6 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -68,7 +68,6 @@ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = { struct omap_hwmod_class omap2xxx_timer_hwmod_class = { .name = "timer", .sysc = &omap2xxx_timer_sysc, - .rev = OMAP_TIMER_IP_VERSION_1, }; /* @@ -257,7 +256,6 @@ struct omap_hwmod omap2xxx_timer2_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap2xxx_timer_hwmod_class, }; @@ -276,7 +274,6 @@ struct omap_hwmod omap2xxx_timer3_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap2xxx_timer_hwmod_class, }; @@ -295,7 +292,6 @@ struct omap_hwmod omap2xxx_timer4_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap2xxx_timer_hwmod_class, }; @@ -314,7 +310,6 @@ struct omap_hwmod omap2xxx_timer5_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap2xxx_timer_hwmod_class, }; @@ -333,7 +328,6 @@ struct omap_hwmod omap2xxx_timer6_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap2xxx_timer_hwmod_class, }; @@ -352,7 +346,6 @@ struct omap_hwmod omap2xxx_timer7_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap2xxx_timer_hwmod_class, }; @@ -371,7 +364,6 @@ struct omap_hwmod omap2xxx_timer8_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap2xxx_timer_hwmod_class, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index b26d3c9bca1..c9e38200216 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -14,6 +14,8 @@ * * XXX these should be marked initdata for multi-OMAP kernels */ +#include <linux/power/smartreflex.h> + #include <plat/omap_hwmod.h> #include <mach/irqs.h> #include <plat/cpu.h> @@ -29,8 +31,6 @@ #include <plat/dmtimer.h> #include "omap_hwmod_common_data.h" - -#include "smartreflex.h" #include "prm-regbits-34xx.h" #include "cm-regbits-34xx.h" #include "wd_timer.h" @@ -129,7 +129,6 @@ static struct omap_hwmod_class_sysconfig omap3xxx_timer_1ms_sysc = { static struct omap_hwmod_class omap3xxx_timer_1ms_hwmod_class = { .name = "timer", .sysc = &omap3xxx_timer_1ms_sysc, - .rev = OMAP_TIMER_IP_VERSION_1, }; static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = { @@ -145,12 +144,11 @@ static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = { static struct omap_hwmod_class omap3xxx_timer_hwmod_class = { .name = "timer", .sysc = &omap3xxx_timer_sysc, - .rev = OMAP_TIMER_IP_VERSION_1, }; /* secure timers dev attribute */ static struct omap_timer_capability_dev_attr capability_secure_dev_attr = { - .timer_capability = OMAP_TIMER_SECURE, + .timer_capability = OMAP_TIMER_ALWON | OMAP_TIMER_SECURE, }; /* always-on timers dev attribute */ @@ -195,7 +193,6 @@ static struct omap_hwmod omap3xxx_timer2_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap3xxx_timer_1ms_hwmod_class, }; @@ -213,7 +210,6 @@ static struct omap_hwmod omap3xxx_timer3_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT3_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap3xxx_timer_hwmod_class, }; @@ -231,7 +227,6 @@ static struct omap_hwmod omap3xxx_timer4_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT4_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap3xxx_timer_hwmod_class, }; @@ -249,7 +244,6 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap3xxx_timer_hwmod_class, }; @@ -267,7 +261,6 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap3xxx_timer_hwmod_class, }; @@ -285,7 +278,6 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap3xxx_timer_hwmod_class, }; @@ -527,11 +519,27 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = { { .irq = INT_35XX_UART4_IRQ, }, + { .irq = -1 } }; static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = { { .name = "rx", .dma_req = AM35XX_DMA_UART4_RX, }, { .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, }, + { .dma_req = -1 } +}; + +/* + * XXX AM35xx UART4 cannot complete its softreset without uart1_fck or + * uart2_fck being enabled. So we add uart1_fck as an optional clock, + * below, and set the HWMOD_CONTROL_OPT_CLKS_IN_RESET. This really + * should not be needed. The functional clock structure of the AM35xx + * UART4 is extremely unclear and opaque; it is unclear what the role + * of uart1/2_fck is for the UART4. Any clarification from either + * empirical testing or the AM3505/3517 hardware designers would be + * most welcome. + */ +static struct omap_hwmod_opt_clk am35xx_uart4_opt_clks[] = { + { .role = "softreset_uart1_fck", .clk = "uart1_fck" }, }; static struct omap_hwmod am35xx_uart4_hwmod = { @@ -543,11 +551,14 @@ static struct omap_hwmod am35xx_uart4_hwmod = { .omap2 = { .module_offs = CORE_MOD, .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_UART4_SHIFT, + .module_bit = AM35XX_EN_UART4_SHIFT, .idlest_reg_id = 1, - .idlest_idle_bit = OMAP3430_EN_UART4_SHIFT, + .idlest_idle_bit = AM35XX_ST_UART4_SHIFT, }, }, + .opt_clks = am35xx_uart4_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(am35xx_uart4_opt_clks), + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .class = &omap2_uart_class, }; @@ -1074,6 +1085,17 @@ static struct omap_hwmod_class omap3xxx_mcbsp_hwmod_class = { .rev = MCBSP_CONFIG_TYPE3, }; +/* McBSP functional clock mapping */ +static struct omap_hwmod_opt_clk mcbsp15_opt_clks[] = { + { .role = "pad_fck", .clk = "mcbsp_clks" }, + { .role = "prcm_fck", .clk = "core_96m_fck" }, +}; + +static struct omap_hwmod_opt_clk mcbsp234_opt_clks[] = { + { .role = "pad_fck", .clk = "mcbsp_clks" }, + { .role = "prcm_fck", .clk = "per_96m_fck" }, +}; + /* mcbsp1 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = { { .name = "common", .irq = 16 }, @@ -1097,6 +1119,8 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP1_SHIFT, }, }, + .opt_clks = mcbsp15_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp15_opt_clks), }; /* mcbsp2 */ @@ -1126,6 +1150,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT, }, }, + .opt_clks = mcbsp234_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks), .dev_attr = &omap34xx_mcbsp2_dev_attr, }; @@ -1156,6 +1182,8 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT, }, }, + .opt_clks = mcbsp234_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks), .dev_attr = &omap34xx_mcbsp3_dev_attr, }; @@ -1188,6 +1216,8 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP4_SHIFT, }, }, + .opt_clks = mcbsp234_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks), }; /* mcbsp5 */ @@ -1219,6 +1249,8 @@ static struct omap_hwmod omap3xxx_mcbsp5_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP5_SHIFT, }, }, + .opt_clks = mcbsp15_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp15_opt_clks), }; /* 'mcbsp sidetone' class */ @@ -1325,7 +1357,7 @@ static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = { }; static struct omap_hwmod omap34xx_sr1_hwmod = { - .name = "sr1", + .name = "smartreflex_mpu_iva", .class = &omap34xx_smartreflex_hwmod_class, .main_clk = "sr1_fck", .prcm = { @@ -1343,7 +1375,7 @@ static struct omap_hwmod omap34xx_sr1_hwmod = { }; static struct omap_hwmod omap36xx_sr1_hwmod = { - .name = "sr1", + .name = "smartreflex_mpu_iva", .class = &omap36xx_smartreflex_hwmod_class, .main_clk = "sr1_fck", .prcm = { @@ -1370,7 +1402,7 @@ static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = { }; static struct omap_hwmod omap34xx_sr2_hwmod = { - .name = "sr2", + .name = "smartreflex_core", .class = &omap34xx_smartreflex_hwmod_class, .main_clk = "sr2_fck", .prcm = { @@ -1388,7 +1420,7 @@ static struct omap_hwmod omap34xx_sr2_hwmod = { }; static struct omap_hwmod omap36xx_sr2_hwmod = { - .name = "sr2", + .name = "smartreflex_core", .class = &omap36xx_smartreflex_hwmod_class, .main_clk = "sr2_fck", .prcm = { @@ -1638,25 +1670,20 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { /* usb_otg_hs */ static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = { - { .name = "mc", .irq = 71 }, { .irq = -1 } }; static struct omap_hwmod_class am35xx_usbotg_class = { .name = "am35xx_usbotg", - .sysc = NULL, }; static struct omap_hwmod am35xx_usbhsotg_hwmod = { .name = "am35x_otg_hs", .mpu_irqs = am35xx_usbhsotg_mpu_irqs, - .main_clk = NULL, - .prcm = { - .omap2 = { - }, - }, + .main_clk = "hsotgusb_fck", .class = &am35xx_usbotg_class, + .flags = HWMOD_NO_IDLEST, }; /* MMC/SD/SDIO common */ @@ -2097,9 +2124,10 @@ static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = { static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = { .master = &am35xx_usbhsotg_hwmod, .slave = &omap3xxx_l3_main_hwmod, - .clk = "core_l3_ick", + .clk = "hsotgusb_ick", .user = OCP_USER_MPU, }; + /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { .master = &omap3xxx_l4_core_hwmod, @@ -2243,6 +2271,7 @@ static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = { .pa_end = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1, .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, }, + { } }; static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = { @@ -2393,7 +2422,7 @@ static struct omap_hwmod_addr_space am35xx_usbhsotg_addrs[] = { static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = { .master = &omap3xxx_l4_core_hwmod, .slave = &am35xx_usbhsotg_hwmod, - .clk = "l4_ick", + .clk = "hsotgusb_ick", .addr = am35xx_usbhsotg_addrs, .user = OCP_USER_MPU, }; @@ -3138,6 +3167,107 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__counter_32k = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* am35xx has Davinci MDIO & EMAC */ +static struct omap_hwmod_class am35xx_mdio_class = { + .name = "davinci_mdio", +}; + +static struct omap_hwmod am35xx_mdio_hwmod = { + .name = "davinci_mdio", + .class = &am35xx_mdio_class, + .flags = HWMOD_NO_IDLEST, +}; + +/* + * XXX Should be connected to an IPSS hwmod, not the L3 directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_mdio__l3 = { + .master = &am35xx_mdio_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "emac_fck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am35xx_mdio_addrs[] = { + { + .pa_start = AM35XX_IPSS_MDIO_BASE, + .pa_end = AM35XX_IPSS_MDIO_BASE + SZ_4K - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +/* l4_core -> davinci mdio */ +/* + * XXX Should be connected to an IPSS hwmod, not the L4_CORE directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_l4_core__mdio = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &am35xx_mdio_hwmod, + .clk = "emac_fck", + .addr = am35xx_mdio_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_irq_info am35xx_emac_mpu_irqs[] = { + { .name = "rxthresh", .irq = INT_35XX_EMAC_C0_RXTHRESH_IRQ }, + { .name = "rx_pulse", .irq = INT_35XX_EMAC_C0_RX_PULSE_IRQ }, + { .name = "tx_pulse", .irq = INT_35XX_EMAC_C0_TX_PULSE_IRQ }, + { .name = "misc_pulse", .irq = INT_35XX_EMAC_C0_MISC_PULSE_IRQ }, + { .irq = -1 } +}; + +static struct omap_hwmod_class am35xx_emac_class = { + .name = "davinci_emac", +}; + +static struct omap_hwmod am35xx_emac_hwmod = { + .name = "davinci_emac", + .mpu_irqs = am35xx_emac_mpu_irqs, + .class = &am35xx_emac_class, + .flags = HWMOD_NO_IDLEST, +}; + +/* l3_core -> davinci emac interface */ +/* + * XXX Should be connected to an IPSS hwmod, not the L3 directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_emac__l3 = { + .master = &am35xx_emac_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "emac_ick", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am35xx_emac_addrs[] = { + { + .pa_start = AM35XX_IPSS_EMAC_BASE, + .pa_end = AM35XX_IPSS_EMAC_BASE + 0x30000 - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +/* l4_core -> davinci emac */ +/* + * XXX Should be connected to an IPSS hwmod, not the L4_CORE directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_l4_core__emac = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &am35xx_emac_hwmod, + .clk = "emac_ick", + .addr = am35xx_emac_addrs, + .user = OCP_USER_MPU, +}; + static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l3_main__l4_core, &omap3xxx_l3_main__l4_per, @@ -3266,6 +3396,10 @@ static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__usb_tll_hs, &omap3xxx_l4_core__es3plus_mmc1, &omap3xxx_l4_core__es3plus_mmc2, + &am35xx_mdio__l3, + &am35xx_l4_core__mdio, + &am35xx_emac__l3, + &am35xx_l4_core__emac, NULL }; @@ -3283,6 +3417,8 @@ int __init omap3xxx_hwmod_init(void) struct omap_hwmod_ocp_if **h = NULL; unsigned int rev; + omap_hwmod_init(); + /* Register hwmod links common to all OMAP3 */ r = omap_hwmod_register_links(omap3xxx_hwmod_ocp_ifs); if (r < 0) diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index b7bcba5221b..242aee498ce 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -19,6 +19,7 @@ */ #include <linux/io.h> +#include <linux/power/smartreflex.h> #include <plat/omap_hwmod.h> #include <plat/cpu.h> @@ -32,8 +33,6 @@ #include <plat/common.h> #include "omap_hwmod_common_data.h" - -#include "smartreflex.h" #include "cm1_44xx.h" #include "cm2_44xx.h" #include "prm44xx.h" @@ -2544,14 +2543,12 @@ static struct omap_hwmod omap44xx_prcm_mpu_hwmod = { static struct omap_hwmod omap44xx_cm_core_aon_hwmod = { .name = "cm_core_aon", .class = &omap44xx_prcm_hwmod_class, - .clkdm_name = "cm_clkdm", }; /* cm_core */ static struct omap_hwmod omap44xx_cm_core_hwmod = { .name = "cm_core", .class = &omap44xx_prcm_hwmod_class, - .clkdm_name = "cm_clkdm", }; /* prm */ @@ -2568,7 +2565,6 @@ static struct omap_hwmod_rst_info omap44xx_prm_resets[] = { static struct omap_hwmod omap44xx_prm_hwmod = { .name = "prm", .class = &omap44xx_prcm_hwmod_class, - .clkdm_name = "prm_clkdm", .mpu_irqs = omap44xx_prm_irqs, .rst_lines = omap44xx_prm_resets, .rst_lines_cnt = ARRAY_SIZE(omap44xx_prm_resets), @@ -2947,7 +2943,6 @@ static struct omap_hwmod omap44xx_timer2_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .dev_attr = &capability_alwon_dev_attr, }; /* timer3 */ @@ -2969,7 +2964,6 @@ static struct omap_hwmod omap44xx_timer3_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .dev_attr = &capability_alwon_dev_attr, }; /* timer4 */ @@ -2991,7 +2985,6 @@ static struct omap_hwmod omap44xx_timer4_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .dev_attr = &capability_alwon_dev_attr, }; /* timer5 */ @@ -3013,7 +3006,6 @@ static struct omap_hwmod omap44xx_timer5_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .dev_attr = &capability_alwon_dev_attr, }; /* timer6 */ @@ -3036,7 +3028,6 @@ static struct omap_hwmod omap44xx_timer6_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .dev_attr = &capability_alwon_dev_attr, }; /* timer7 */ @@ -3058,7 +3049,6 @@ static struct omap_hwmod omap44xx_timer7_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .dev_attr = &capability_alwon_dev_attr, }; /* timer8 */ @@ -6148,6 +6138,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { int __init omap44xx_hwmod_init(void) { + omap_hwmod_init(); return omap_hwmod_register_links(omap44xx_hwmod_ocp_ifs); } diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c index 51e5418899f..9f1ccdc8cc8 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c @@ -47,6 +47,16 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = { .midle_shift = SYSC_TYPE2_MIDLEMODE_SHIFT, .sidle_shift = SYSC_TYPE2_SIDLEMODE_SHIFT, .srst_shift = SYSC_TYPE2_SOFTRESET_SHIFT, + .dmadisable_shift = SYSC_TYPE2_DMADISABLE_SHIFT, +}; + +/** + * struct omap_hwmod_sysc_type3 - TYPE3 sysconfig scheme. + * Used by some IPs on AM33xx + */ +struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3 = { + .midle_shift = SYSC_TYPE3_MIDLEMODE_SHIFT, + .sidle_shift = SYSC_TYPE3_SIDLEMODE_SHIFT, }; struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = { diff --git a/arch/arm/mach-omap2/omap_l3_noc.h b/arch/arm/mach-omap2/omap_l3_noc.h index 90b50984cd2..a6ce34dc481 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.h +++ b/arch/arm/mach-omap2/omap_l3_noc.h @@ -51,7 +51,9 @@ static u32 l3_targ_inst_clk1[] = { 0x200, /* DMM2 */ 0x300, /* ABE */ 0x400, /* L4CFG */ - 0x600 /* CLK2 PWR DISC */ + 0x600, /* CLK2 PWR DISC */ + 0x0, /* Host CLK1 */ + 0x900 /* L4 Wakeup */ }; static u32 l3_targ_inst_clk2[] = { @@ -72,11 +74,16 @@ static u32 l3_targ_inst_clk2[] = { 0xE00, /* missing in TRM corresponds to AES2*/ 0xC00, /* L4 PER3 */ 0xA00, /* L4 PER1*/ - 0xB00 /* L4 PER2*/ + 0xB00, /* L4 PER2*/ + 0x0, /* HOST CLK2 */ + 0x1800, /* CAL */ + 0x1700 /* LLI */ }; static u32 l3_targ_inst_clk3[] = { - 0x0100 /* EMUSS */ + 0x0100 /* EMUSS */, + 0x0300, /* DEBUGSS_CT_TBR */ + 0x0 /* HOST CLK3 */ }; static struct l3_masters_data { @@ -110,13 +117,15 @@ static struct l3_masters_data { { 0xC8, "USBHOSTFS"} }; -static char *l3_targ_inst_name[L3_MODULES][18] = { +static char *l3_targ_inst_name[L3_MODULES][21] = { { "DMM1", "DMM2", "ABE", "L4CFG", "CLK2 PWR DISC", + "HOST CLK1", + "L4 WAKEUP" }, { "CORTEX M3" , @@ -137,9 +146,14 @@ static char *l3_targ_inst_name[L3_MODULES][18] = { "L4 PER3", "L4 PER1", "L4 PER2", + "HOST CLK2", + "CAL", + "LLI" }, { "EMUSS", + "DEBUG SOURCE", + "HOST CLK3" }, }; diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index de6d4645174..d8f6dbf45d1 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -53,7 +53,7 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, omap_table_init = 1; /* Lets now register with OPP library */ - for (i = 0; i < opp_def_size; i++) { + for (i = 0; i < opp_def_size; i++, opp_def++) { struct omap_hwmod *oh; struct device *dev; @@ -86,7 +86,6 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, __func__, opp_def->freq, opp_def->hwmod_name, i, r); } - opp_def++; } return 0; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 78564895e91..686137d164d 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -15,12 +15,25 @@ #include "powerdomain.h" +#ifdef CONFIG_CPU_IDLE +extern int __init omap3_idle_init(void); +extern int __init omap4_idle_init(void); +#else +static inline int omap3_idle_init(void) +{ + return 0; +} + +static inline int omap4_idle_init(void) +{ + return 0; +} +#endif + extern void *omap3_secure_ram_storage; extern void omap3_pm_off_mode_enable(int); extern void omap_sram_idle(void); extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state); -extern int omap3_idle_init(void); -extern int omap4_idle_init(void); extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused); extern int (*omap_pm_suspend)(void); @@ -88,7 +101,7 @@ extern void enable_omap3630_toggle_l2_on_restore(void); static inline void enable_omap3630_toggle_l2_on_restore(void) { } #endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */ -#ifdef CONFIG_OMAP_SMARTREFLEX +#ifdef CONFIG_POWER_AVS_OMAP extern int omap_devinit_smartreflex(void); extern void omap_enable_smartreflex_on_init(void); #else diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 3a595e89972..e4fc88c65db 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -70,34 +70,6 @@ void (*omap3_do_wfi_sram)(void); static struct powerdomain *mpu_pwrdm, *neon_pwrdm; static struct powerdomain *core_pwrdm, *per_pwrdm; -static struct powerdomain *cam_pwrdm; - -static void omap3_enable_io_chain(void) -{ - int timeout = 0; - - omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); - /* Do a readback to assure write has been done */ - omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN); - - while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) & - OMAP3430_ST_IO_CHAIN_MASK)) { - timeout++; - if (timeout > 1000) { - pr_err("Wake up daisy chain activation failed.\n"); - return; - } - omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, - WKUP_MOD, PM_WKEN); - } -} - -static void omap3_disable_io_chain(void) -{ - omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); -} static void omap3_core_save_context(void) { @@ -299,24 +271,22 @@ void omap_sram_idle(void) /* Enable IO-PAD and IO-CHAIN wakeups */ per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (omap3_has_io_wakeup() && - (per_next_state < PWRDM_POWER_ON || - core_next_state < PWRDM_POWER_ON)) { - omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); - if (omap3_has_io_chain_ctrl()) - omap3_enable_io_chain(); - } - pwrdm_pre_transition(); + if (mpu_next_state < PWRDM_POWER_ON) { + pwrdm_pre_transition(mpu_pwrdm); + pwrdm_pre_transition(neon_pwrdm); + } /* PER */ if (per_next_state < PWRDM_POWER_ON) { + pwrdm_pre_transition(per_pwrdm); per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; omap2_gpio_prepare_for_idle(per_going_off); } /* CORE */ if (core_next_state < PWRDM_POWER_ON) { + pwrdm_pre_transition(core_pwrdm); if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_cm_save_context(); @@ -369,26 +339,20 @@ void omap_sram_idle(void) omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, OMAP3430_GR_MOD, OMAP3_PRM_VOLTCTRL_OFFSET); + pwrdm_post_transition(core_pwrdm); } omap3_intc_resume_idle(); - pwrdm_post_transition(); - /* PER */ - if (per_next_state < PWRDM_POWER_ON) + if (per_next_state < PWRDM_POWER_ON) { omap2_gpio_resume_after_idle(); - - /* Disable IO-PAD and IO-CHAIN wakeup */ - if (omap3_has_io_wakeup() && - (per_next_state < PWRDM_POWER_ON || - core_next_state < PWRDM_POWER_ON)) { - omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, - PM_WKEN); - if (omap3_has_io_chain_ctrl()) - omap3_disable_io_chain(); + pwrdm_post_transition(per_pwrdm); } - clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]); + if (mpu_next_state < PWRDM_POWER_ON) { + pwrdm_post_transition(mpu_pwrdm); + pwrdm_post_transition(neon_pwrdm); + } } static void omap3_pm_idle(void) @@ -581,10 +545,13 @@ static void __init prcm_setup_regs(void) OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); /* Don't attach IVA interrupts */ - omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); - omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); - omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); - omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL); + if (omap3_has_iva()) { + omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); + omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); + omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); + omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, + OMAP3430_PM_IVAGRPSEL); + } /* Clear any pending 'reset' flags */ omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST); @@ -598,7 +565,9 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - omap3_iva_idle(); + if (omap3_has_iva()) + omap3_iva_idle(); + omap3_d2d_idle(); } @@ -749,7 +718,6 @@ int __init omap3_pm_init(void) neon_pwrdm = pwrdm_lookup("neon_pwrdm"); per_pwrdm = pwrdm_lookup("per_pwrdm"); core_pwrdm = pwrdm_lookup("core_pwrdm"); - cam_pwrdm = pwrdm_lookup("cam_pwrdm"); neon_clkdm = clkdm_lookup("neon_clkdm"); mpu_clkdm = clkdm_lookup("mpu_clkdm"); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 96114901b93..69b36e185e9 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -526,7 +526,8 @@ int pwrdm_read_next_pwrst(struct powerdomain *pwrdm) * * Return the powerdomain @pwrdm's current power state. Returns -EINVAL * if the powerdomain pointer is null or returns the current power state - * upon success. + * upon success. Note that if the power domain only supports the ON state + * then just return ON as the current state. */ int pwrdm_read_pwrst(struct powerdomain *pwrdm) { @@ -535,6 +536,9 @@ int pwrdm_read_pwrst(struct powerdomain *pwrdm) if (!pwrdm) return -EINVAL; + if (pwrdm->pwrsts == PWRSTS_ON) + return PWRDM_POWER_ON; + if (arch_pwrdm && arch_pwrdm->pwrdm_read_pwrst) ret = arch_pwrdm->pwrdm_read_pwrst(pwrdm); @@ -981,15 +985,23 @@ int pwrdm_state_switch(struct powerdomain *pwrdm) return ret; } -int pwrdm_pre_transition(void) +int pwrdm_pre_transition(struct powerdomain *pwrdm) { - pwrdm_for_each(_pwrdm_pre_transition_cb, NULL); + if (pwrdm) + _pwrdm_pre_transition_cb(pwrdm, NULL); + else + pwrdm_for_each(_pwrdm_pre_transition_cb, NULL); + return 0; } -int pwrdm_post_transition(void) +int pwrdm_post_transition(struct powerdomain *pwrdm) { - pwrdm_for_each(_pwrdm_post_transition_cb, NULL); + if (pwrdm) + _pwrdm_post_transition_cb(pwrdm, NULL); + else + pwrdm_for_each(_pwrdm_post_transition_cb, NULL); + return 0; } diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 8f88d65c46e..baee90608d1 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -67,9 +67,9 @@ /* * Maximum number of clockdomains that can be associated with a powerdomain. - * CORE powerdomain on OMAP4 is the worst case + * PER powerdomain on AM33XX is the worst case */ -#define PWRDM_MAX_CLKDMS 9 +#define PWRDM_MAX_CLKDMS 11 /* XXX A completely arbitrary number. What is reasonable here? */ #define PWRDM_TRANSITION_BAILOUT 100000 @@ -92,6 +92,15 @@ struct powerdomain; * @pwrdm_clkdms: Clockdomains in this powerdomain * @node: list_head linking all powerdomains * @voltdm_node: list_head linking all powerdomains in a voltagedomain + * @pwrstctrl_offs: (AM33XX only) XXX_PWRSTCTRL reg offset from prcm_offs + * @pwrstst_offs: (AM33XX only) XXX_PWRSTST reg offset from prcm_offs + * @logicretstate_mask: (AM33XX only) mask for logic retention bitfield + * in @pwrstctrl_offs + * @mem_on_mask: (AM33XX only) mask for mem on bitfield in @pwrstctrl_offs + * @mem_ret_mask: (AM33XX only) mask for mem ret bitfield in @pwrstctrl_offs + * @mem_pwrst_mask: (AM33XX only) mask for mem state bitfield in @pwrstst_offs + * @mem_retst_mask: (AM33XX only) mask for mem retention state bitfield + * in @pwrstctrl_offs * @state: * @state_counter: * @timer: @@ -121,6 +130,14 @@ struct powerdomain { unsigned ret_logic_off_counter; unsigned ret_mem_off_counter[PWRDM_MAX_MEM_BANKS]; + const u8 pwrstctrl_offs; + const u8 pwrstst_offs; + const u32 logicretstate_mask; + const u32 mem_on_mask[PWRDM_MAX_MEM_BANKS]; + const u32 mem_ret_mask[PWRDM_MAX_MEM_BANKS]; + const u32 mem_pwrst_mask[PWRDM_MAX_MEM_BANKS]; + const u32 mem_retst_mask[PWRDM_MAX_MEM_BANKS]; + #ifdef CONFIG_PM_DEBUG s64 timer; s64 state_timer[PWRDM_MAX_PWRSTS]; @@ -213,8 +230,8 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm); int pwrdm_wait_transition(struct powerdomain *pwrdm); int pwrdm_state_switch(struct powerdomain *pwrdm); -int pwrdm_pre_transition(void); -int pwrdm_post_transition(void); +int pwrdm_pre_transition(struct powerdomain *pwrdm); +int pwrdm_post_transition(struct powerdomain *pwrdm); int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm); int pwrdm_get_context_loss_count(struct powerdomain *pwrdm); bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm); @@ -222,10 +239,12 @@ bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm); extern void omap242x_powerdomains_init(void); extern void omap243x_powerdomains_init(void); extern void omap3xxx_powerdomains_init(void); +extern void am33xx_powerdomains_init(void); extern void omap44xx_powerdomains_init(void); extern struct pwrdm_ops omap2_pwrdm_operations; extern struct pwrdm_ops omap3_pwrdm_operations; +extern struct pwrdm_ops am33xx_pwrdm_operations; extern struct pwrdm_ops omap4_pwrdm_operations; /* Common Internal functions used across OMAP rev's */ diff --git a/arch/arm/mach-omap2/powerdomain33xx.c b/arch/arm/mach-omap2/powerdomain33xx.c new file mode 100644 index 00000000000..67c5663899b --- /dev/null +++ b/arch/arm/mach-omap2/powerdomain33xx.c @@ -0,0 +1,229 @@ +/* + * AM33XX Powerdomain control + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * Derived from mach-omap2/powerdomain44xx.c written by Rajendra Nayak + * <rnayak@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/io.h> +#include <linux/errno.h> +#include <linux/delay.h> + +#include <plat/prcm.h> + +#include "powerdomain.h" +#include "prm33xx.h" +#include "prm-regbits-33xx.h" + + +static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) +{ + am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK, + (pwrst << OMAP_POWERSTATE_SHIFT), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + return 0; +} + +static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + v &= OMAP_POWERSTATE_MASK; + v >>= OMAP_POWERSTATE_SHIFT; + + return v; +} + +static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= OMAP_POWERSTATEST_MASK; + v >>= OMAP_POWERSTATEST_SHIFT; + + return v; +} + +static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= AM33XX_LASTPOWERSTATEENTERED_MASK; + v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT; + + return v; +} + +static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm) +{ + am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK, + (1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + return 0; +} + +static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) +{ + am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK, + AM33XX_LASTPOWERSTATEENTERED_MASK, + pwrdm->prcm_offs, pwrdm->pwrstst_offs); + return 0; +} + +static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) +{ + u32 m; + + m = pwrdm->logicretstate_mask; + if (!m) + return -EINVAL; + + am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + + return 0; +} + +static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= AM33XX_LOGICSTATEST_MASK; + v >>= AM33XX_LOGICSTATEST_SHIFT; + + return v; +} + +static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm) +{ + u32 v, m; + + m = pwrdm->logicretstate_mask; + if (!m) + return -EINVAL; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + v &= m; + v >>= __ffs(m); + + return v; +} + +static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst) +{ + u32 m; + + m = pwrdm->mem_on_mask[bank]; + if (!m) + return -EINVAL; + + am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + + return 0; +} + +static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst) +{ + u32 m; + + m = pwrdm->mem_ret_mask[bank]; + if (!m) + return -EINVAL; + + am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + + return 0; +} + +static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m, v; + + m = pwrdm->mem_pwrst_mask[bank]; + if (!m) + return -EINVAL; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= m; + v >>= __ffs(m); + + return v; +} + +static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m, v; + + m = pwrdm->mem_retst_mask[bank]; + if (!m) + return -EINVAL; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + v &= m; + v >>= __ffs(m); + + return v; +} + +static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm) +{ + u32 c = 0; + + /* + * REVISIT: pwrdm_wait_transition() may be better implemented + * via a callback and a periodic timer check -- how long do we expect + * powerdomain transitions to take? + */ + + /* XXX Is this udelay() value meaningful? */ + while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs) + & OMAP_INTRANSITION_MASK) && + (c++ < PWRDM_TRANSITION_BAILOUT)) + udelay(1); + + if (c > PWRDM_TRANSITION_BAILOUT) { + pr_err("powerdomain: %s: waited too long to complete transition\n", + pwrdm->name); + return -EAGAIN; + } + + pr_debug("powerdomain: completed transition in %d loops\n", c); + + return 0; +} + +struct pwrdm_ops am33xx_pwrdm_operations = { + .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst, + .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst, + .pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst, + .pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst, + .pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst, + .pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst, + .pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst, + .pwrdm_clear_all_prev_pwrst = am33xx_pwrdm_clear_all_prev_pwrst, + .pwrdm_set_lowpwrstchange = am33xx_pwrdm_set_lowpwrstchange, + .pwrdm_read_mem_pwrst = am33xx_pwrdm_read_mem_pwrst, + .pwrdm_read_mem_retst = am33xx_pwrdm_read_mem_retst, + .pwrdm_set_mem_onst = am33xx_pwrdm_set_mem_onst, + .pwrdm_set_mem_retst = am33xx_pwrdm_set_mem_retst, + .pwrdm_wait_transition = am33xx_pwrdm_wait_transition, +}; diff --git a/arch/arm/mach-omap2/powerdomains33xx_data.c b/arch/arm/mach-omap2/powerdomains33xx_data.c new file mode 100644 index 00000000000..869adb82569 --- /dev/null +++ b/arch/arm/mach-omap2/powerdomains33xx_data.c @@ -0,0 +1,185 @@ +/* + * AM33XX Power domain data + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include "powerdomain.h" +#include "prcm-common.h" +#include "prm-regbits-33xx.h" +#include "prm33xx.h" + +static struct powerdomain gfx_33xx_pwrdm = { + .name = "gfx_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = AM33XX_PRM_GFX_MOD, + .pwrstctrl_offs = AM33XX_PM_GFX_PWRSTCTRL_OFFSET, + .pwrstst_offs = AM33XX_PM_GFX_PWRSTST_OFFSET, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, + .banks = 1, + .logicretstate_mask = AM33XX_LOGICRETSTATE_MASK, + .mem_on_mask = { + [0] = AM33XX_GFX_MEM_ONSTATE_MASK, /* gfx_mem */ + }, + .mem_ret_mask = { + [0] = AM33XX_GFX_MEM_RETSTATE_MASK, /* gfx_mem */ + }, + .mem_pwrst_mask = { + [0] = AM33XX_GFX_MEM_STATEST_MASK, /* gfx_mem */ + }, + .mem_retst_mask = { + [0] = AM33XX_GFX_MEM_RETSTATE_MASK, /* gfx_mem */ + }, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* gfx_mem */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* gfx_mem */ + }, +}; + +static struct powerdomain rtc_33xx_pwrdm = { + .name = "rtc_pwrdm", + .voltdm = { .name = "rtc" }, + .prcm_offs = AM33XX_PRM_RTC_MOD, + .pwrstctrl_offs = AM33XX_PM_RTC_PWRSTCTRL_OFFSET, + .pwrstst_offs = AM33XX_PM_RTC_PWRSTST_OFFSET, + .pwrsts = PWRSTS_ON, + .logicretstate_mask = AM33XX_LOGICRETSTATE_MASK, +}; + +static struct powerdomain wkup_33xx_pwrdm = { + .name = "wkup_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = AM33XX_PRM_WKUP_MOD, + .pwrstctrl_offs = AM33XX_PM_WKUP_PWRSTCTRL_OFFSET, + .pwrstst_offs = AM33XX_PM_WKUP_PWRSTST_OFFSET, + .pwrsts = PWRSTS_ON, + .logicretstate_mask = AM33XX_LOGICRETSTATE_3_3_MASK, +}; + +static struct powerdomain per_33xx_pwrdm = { + .name = "per_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = AM33XX_PRM_PER_MOD, + .pwrstctrl_offs = AM33XX_PM_PER_PWRSTCTRL_OFFSET, + .pwrstst_offs = AM33XX_PM_PER_PWRSTST_OFFSET, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, + .banks = 3, + .logicretstate_mask = AM33XX_LOGICRETSTATE_3_3_MASK, + .mem_on_mask = { + [0] = AM33XX_PRUSS_MEM_ONSTATE_MASK, /* pruss_mem */ + [1] = AM33XX_PER_MEM_ONSTATE_MASK, /* per_mem */ + [2] = AM33XX_RAM_MEM_ONSTATE_MASK, /* ram_mem */ + }, + .mem_ret_mask = { + [0] = AM33XX_PRUSS_MEM_RETSTATE_MASK, /* pruss_mem */ + [1] = AM33XX_PER_MEM_RETSTATE_MASK, /* per_mem */ + [2] = AM33XX_RAM_MEM_RETSTATE_MASK, /* ram_mem */ + }, + .mem_pwrst_mask = { + [0] = AM33XX_PRUSS_MEM_STATEST_MASK, /* pruss_mem */ + [1] = AM33XX_PER_MEM_STATEST_MASK, /* per_mem */ + [2] = AM33XX_RAM_MEM_STATEST_MASK, /* ram_mem */ + }, + .mem_retst_mask = { + [0] = AM33XX_PRUSS_MEM_RETSTATE_MASK, /* pruss_mem */ + [1] = AM33XX_PER_MEM_RETSTATE_MASK, /* per_mem */ + [2] = AM33XX_RAM_MEM_RETSTATE_MASK, /* ram_mem */ + }, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* pruss_mem */ + [1] = PWRSTS_OFF_RET, /* per_mem */ + [2] = PWRSTS_OFF_RET, /* ram_mem */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* pruss_mem */ + [1] = PWRSTS_ON, /* per_mem */ + [2] = PWRSTS_ON, /* ram_mem */ + }, +}; + +static struct powerdomain mpu_33xx_pwrdm = { + .name = "mpu_pwrdm", + .voltdm = { .name = "mpu" }, + .prcm_offs = AM33XX_PRM_MPU_MOD, + .pwrstctrl_offs = AM33XX_PM_MPU_PWRSTCTRL_OFFSET, + .pwrstst_offs = AM33XX_PM_MPU_PWRSTST_OFFSET, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, + .banks = 3, + .logicretstate_mask = AM33XX_LOGICRETSTATE_MASK, + .mem_on_mask = { + [0] = AM33XX_MPU_L1_ONSTATE_MASK, /* mpu_l1 */ + [1] = AM33XX_MPU_L2_ONSTATE_MASK, /* mpu_l2 */ + [2] = AM33XX_MPU_RAM_ONSTATE_MASK, /* mpu_ram */ + }, + .mem_ret_mask = { + [0] = AM33XX_MPU_L1_RETSTATE_MASK, /* mpu_l1 */ + [1] = AM33XX_MPU_L2_RETSTATE_MASK, /* mpu_l2 */ + [2] = AM33XX_MPU_RAM_RETSTATE_MASK, /* mpu_ram */ + }, + .mem_pwrst_mask = { + [0] = AM33XX_MPU_L1_STATEST_MASK, /* mpu_l1 */ + [1] = AM33XX_MPU_L2_STATEST_MASK, /* mpu_l2 */ + [2] = AM33XX_MPU_RAM_STATEST_MASK, /* mpu_ram */ + }, + .mem_retst_mask = { + [0] = AM33XX_MPU_L1_RETSTATE_MASK, /* mpu_l1 */ + [1] = AM33XX_MPU_L2_RETSTATE_MASK, /* mpu_l2 */ + [2] = AM33XX_MPU_RAM_RETSTATE_MASK, /* mpu_ram */ + }, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* mpu_l1 */ + [1] = PWRSTS_OFF_RET, /* mpu_l2 */ + [2] = PWRSTS_OFF_RET, /* mpu_ram */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* mpu_l1 */ + [1] = PWRSTS_ON, /* mpu_l2 */ + [2] = PWRSTS_ON, /* mpu_ram */ + }, +}; + +static struct powerdomain cefuse_33xx_pwrdm = { + .name = "cefuse_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = AM33XX_PRM_CEFUSE_MOD, + .pwrstctrl_offs = AM33XX_PM_CEFUSE_PWRSTCTRL_OFFSET, + .pwrstst_offs = AM33XX_PM_CEFUSE_PWRSTST_OFFSET, + .pwrsts = PWRSTS_OFF_ON, +}; + +static struct powerdomain *powerdomains_am33xx[] __initdata = { + &gfx_33xx_pwrdm, + &rtc_33xx_pwrdm, + &wkup_33xx_pwrdm, + &per_33xx_pwrdm, + &mpu_33xx_pwrdm, + &cefuse_33xx_pwrdm, + NULL, +}; + +void __init am33xx_powerdomains_init(void) +{ + pwrdm_register_platform_funcs(&am33xx_pwrdm_operations); + pwrdm_register_pwrdms(powerdomains_am33xx); + pwrdm_complete_init(); +} diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index fb0a0a6869d..bb883e46307 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -71,6 +71,22 @@ static struct powerdomain mpu_3xxx_pwrdm = { .voltdm = { .name = "mpu_iva" }, }; +static struct powerdomain mpu_am35x_pwrdm = { + .name = "mpu_pwrdm", + .prcm_offs = MPU_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .flags = PWRDM_HAS_MPU_QUIRK, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, + }, + .voltdm = { .name = "mpu_iva" }, +}; + /* * The USBTLL Save-and-Restore mechanism is broken on * 3430s up to ES3.0 and 3630ES1.0. Hence this feature @@ -120,6 +136,23 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = { .voltdm = { .name = "core" }, }; +static struct powerdomain core_am35x_pwrdm = { + .name = "core_pwrdm", + .prcm_offs = CORE_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .banks = 2, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, /* MEM1RETSTATE */ + [1] = PWRSTS_ON, /* MEM2RETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* MEM1ONSTATE */ + [1] = PWRSTS_ON, /* MEM2ONSTATE */ + }, + .voltdm = { .name = "core" }, +}; + static struct powerdomain dss_pwrdm = { .name = "dss_pwrdm", .prcm_offs = OMAP3430_DSS_MOD, @@ -135,6 +168,21 @@ static struct powerdomain dss_pwrdm = { .voltdm = { .name = "core" }, }; +static struct powerdomain dss_am35x_pwrdm = { + .name = "dss_pwrdm", + .prcm_offs = OMAP3430_DSS_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* MEMONSTATE */ + }, + .voltdm = { .name = "core" }, +}; + /* * Although the 34XX TRM Rev K Table 4-371 notes that retention is a * possible SGX powerstate, the SGX device itself does not support @@ -156,6 +204,21 @@ static struct powerdomain sgx_pwrdm = { .voltdm = { .name = "core" }, }; +static struct powerdomain sgx_am35x_pwrdm = { + .name = "sgx_pwrdm", + .prcm_offs = OMAP3430ES2_SGX_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* MEMONSTATE */ + }, + .voltdm = { .name = "core" }, +}; + static struct powerdomain cam_pwrdm = { .name = "cam_pwrdm", .prcm_offs = OMAP3430_CAM_MOD, @@ -186,6 +249,21 @@ static struct powerdomain per_pwrdm = { .voltdm = { .name = "core" }, }; +static struct powerdomain per_am35x_pwrdm = { + .name = "per_pwrdm", + .prcm_offs = OMAP3430_PER_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* MEMONSTATE */ + }, + .voltdm = { .name = "core" }, +}; + static struct powerdomain emu_pwrdm = { .name = "emu_pwrdm", .prcm_offs = OMAP3430_EMU_MOD, @@ -200,6 +278,14 @@ static struct powerdomain neon_pwrdm = { .voltdm = { .name = "mpu_iva" }, }; +static struct powerdomain neon_am35x_pwrdm = { + .name = "neon_pwrdm", + .prcm_offs = OMAP3430_NEON_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .voltdm = { .name = "mpu_iva" }, +}; + static struct powerdomain usbhost_pwrdm = { .name = "usbhost_pwrdm", .prcm_offs = OMAP3430ES2_USBHOST_MOD, @@ -293,6 +379,22 @@ static struct powerdomain *powerdomains_omap3430es3_1plus[] __initdata = { NULL }; +static struct powerdomain *powerdomains_am35x[] __initdata = { + &wkup_omap2_pwrdm, + &mpu_am35x_pwrdm, + &neon_am35x_pwrdm, + &core_am35x_pwrdm, + &sgx_am35x_pwrdm, + &dss_am35x_pwrdm, + &per_am35x_pwrdm, + &emu_pwrdm, + &dpll1_pwrdm, + &dpll3_pwrdm, + &dpll4_pwrdm, + &dpll5_pwrdm, + NULL +}; + void __init omap3xxx_powerdomains_init(void) { unsigned int rev; @@ -301,21 +403,34 @@ void __init omap3xxx_powerdomains_init(void) return; pwrdm_register_platform_funcs(&omap3_pwrdm_operations); - pwrdm_register_pwrdms(powerdomains_omap3430_common); rev = omap_rev(); - if (rev == OMAP3430_REV_ES1_0) - pwrdm_register_pwrdms(powerdomains_omap3430es1); - else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 || - rev == OMAP3430_REV_ES3_0 || rev == OMAP3630_REV_ES1_0) - pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0); - else if (rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2 || - rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1 || - rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2) - pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus); - else - WARN(1, "OMAP3 powerdomain init: unknown chip type\n"); + if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) { + pwrdm_register_pwrdms(powerdomains_am35x); + } else { + pwrdm_register_pwrdms(powerdomains_omap3430_common); + + switch (rev) { + case OMAP3430_REV_ES1_0: + pwrdm_register_pwrdms(powerdomains_omap3430es1); + break; + case OMAP3430_REV_ES2_0: + case OMAP3430_REV_ES2_1: + case OMAP3430_REV_ES3_0: + case OMAP3630_REV_ES1_0: + pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0); + break; + case OMAP3430_REV_ES3_1: + case OMAP3430_REV_ES3_1_2: + case OMAP3630_REV_ES1_1: + case OMAP3630_REV_ES1_2: + pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus); + break; + default: + WARN(1, "OMAP3 powerdomain init: unknown chip type\n"); + } + } pwrdm_complete_init(); } diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 6da3ba483ad..e5f0503a68b 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -203,8 +203,8 @@ #define OMAP3430_EN_MMC2_SHIFT 25 #define OMAP3430_EN_MMC1_MASK (1 << 24) #define OMAP3430_EN_MMC1_SHIFT 24 -#define OMAP3430_EN_UART4_MASK (1 << 23) -#define OMAP3430_EN_UART4_SHIFT 23 +#define AM35XX_EN_UART4_MASK (1 << 23) +#define AM35XX_EN_UART4_SHIFT 23 #define OMAP3430_EN_MCSPI4_MASK (1 << 21) #define OMAP3430_EN_MCSPI4_SHIFT 21 #define OMAP3430_EN_MCSPI3_MASK (1 << 20) @@ -410,13 +410,21 @@ */ #define MAX_MODULE_HARDRESET_WAIT 10000 +/* + * Maximum time(us) it takes to output the signal WUCLKOUT of the last + * pad of the I/O ring after asserting WUCLKIN high. Tero measured + * the actual time at 7 to 8 microseconds on OMAP3 and 2 to 4 + * microseconds on OMAP4, so this timeout may be too high. + */ +#define MAX_IOPAD_LATCH_TIME 100 + # ifndef __ASSEMBLER__ extern void __iomem *prm_base; extern void __iomem *cm_base; extern void __iomem *cm2_base; extern void __iomem *prcm_mpu_base; -#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_OMAP5) +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) extern void omap_prm_base_init(void); extern void omap_cm_base_init(void); #else diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 480f40a5ee4..053e24ed3c4 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -35,6 +35,7 @@ #include "prm2xxx_3xxx.h" #include "prm44xx.h" #include "prminst44xx.h" +#include "cminst44xx.h" #include "prm-regbits-24xx.h" #include "prm-regbits-44xx.h" #include "control.h" @@ -159,8 +160,30 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) if (omap2_globals->prcm_mpu) prcm_mpu_base = omap2_globals->prcm_mpu; - if (cpu_is_omap44xx()) { + if (cpu_is_omap44xx() || soc_is_omap54xx()) { omap_prm_base_init(); omap_cm_base_init(); } } + +/* + * Stubbed functions so that common files continue to build when + * custom builds are used + * XXX These are temporary and should be removed at the earliest possible + * opportunity + */ +int __weak omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ + return 0; +} + +void __weak omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, + s16 cdoffs, u16 clkctrl_offs) +{ +} + +void __weak omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ +} diff --git a/arch/arm/mach-omap2/prm-regbits-33xx.h b/arch/arm/mach-omap2/prm-regbits-33xx.h new file mode 100644 index 00000000000..0221b5c20e8 --- /dev/null +++ b/arch/arm/mach-omap2/prm-regbits-33xx.h @@ -0,0 +1,357 @@ +/* + * AM33XX PRM_XXX register bits + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_33XX_H +#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_33XX_H + +#include "prm.h" + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_ABBOFF_ACT_EXPORT_SHIFT 1 +#define AM33XX_ABBOFF_ACT_EXPORT_MASK (1 << 1) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_ABBOFF_SLEEP_EXPORT_SHIFT 2 +#define AM33XX_ABBOFF_SLEEP_EXPORT_MASK (1 << 2) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_AIPOFF_SHIFT 8 +#define AM33XX_AIPOFF_MASK (1 << 8) + +/* Used by PM_WKUP_PWRSTST */ +#define AM33XX_DEBUGSS_MEM_STATEST_SHIFT 17 +#define AM33XX_DEBUGSS_MEM_STATEST_MASK (0x3 << 17) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_DISABLE_RTA_EXPORT_SHIFT 0 +#define AM33XX_DISABLE_RTA_EXPORT_MASK (1 << 0) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_DPLL_CORE_RECAL_EN_SHIFT 12 +#define AM33XX_DPLL_CORE_RECAL_EN_MASK (1 << 12) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_DPLL_CORE_RECAL_ST_SHIFT 12 +#define AM33XX_DPLL_CORE_RECAL_ST_MASK (1 << 12) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_DPLL_DDR_RECAL_EN_SHIFT 14 +#define AM33XX_DPLL_DDR_RECAL_EN_MASK (1 << 14) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_DPLL_DDR_RECAL_ST_SHIFT 14 +#define AM33XX_DPLL_DDR_RECAL_ST_MASK (1 << 14) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_DPLL_DISP_RECAL_EN_SHIFT 15 +#define AM33XX_DPLL_DISP_RECAL_EN_MASK (1 << 15) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_DPLL_DISP_RECAL_ST_SHIFT 13 +#define AM33XX_DPLL_DISP_RECAL_ST_MASK (1 << 13) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_DPLL_MPU_RECAL_EN_SHIFT 11 +#define AM33XX_DPLL_MPU_RECAL_EN_MASK (1 << 11) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_DPLL_MPU_RECAL_ST_SHIFT 11 +#define AM33XX_DPLL_MPU_RECAL_ST_MASK (1 << 11) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_DPLL_PER_RECAL_EN_SHIFT 13 +#define AM33XX_DPLL_PER_RECAL_EN_MASK (1 << 13) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_DPLL_PER_RECAL_ST_SHIFT 15 +#define AM33XX_DPLL_PER_RECAL_ST_MASK (1 << 15) + +/* Used by RM_WKUP_RSTST */ +#define AM33XX_EMULATION_M3_RST_SHIFT 6 +#define AM33XX_EMULATION_M3_RST_MASK (1 << 6) + +/* Used by RM_MPU_RSTST */ +#define AM33XX_EMULATION_MPU_RST_SHIFT 5 +#define AM33XX_EMULATION_MPU_RST_MASK (1 << 5) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_ENFUNC1_EXPORT_SHIFT 3 +#define AM33XX_ENFUNC1_EXPORT_MASK (1 << 3) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_ENFUNC3_EXPORT_SHIFT 5 +#define AM33XX_ENFUNC3_EXPORT_MASK (1 << 5) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_ENFUNC4_SHIFT 6 +#define AM33XX_ENFUNC4_MASK (1 << 6) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_ENFUNC5_SHIFT 7 +#define AM33XX_ENFUNC5_MASK (1 << 7) + +/* Used by PRM_RSTST */ +#define AM33XX_EXTERNAL_WARM_RST_SHIFT 5 +#define AM33XX_EXTERNAL_WARM_RST_MASK (1 << 5) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_FORCEWKUP_EN_SHIFT 10 +#define AM33XX_FORCEWKUP_EN_MASK (1 << 10) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_FORCEWKUP_ST_SHIFT 10 +#define AM33XX_FORCEWKUP_ST_MASK (1 << 10) + +/* Used by PM_GFX_PWRSTCTRL */ +#define AM33XX_GFX_MEM_ONSTATE_SHIFT 17 +#define AM33XX_GFX_MEM_ONSTATE_MASK (0x3 << 17) + +/* Used by PM_GFX_PWRSTCTRL */ +#define AM33XX_GFX_MEM_RETSTATE_SHIFT 6 +#define AM33XX_GFX_MEM_RETSTATE_MASK (1 << 6) + +/* Used by PM_GFX_PWRSTST */ +#define AM33XX_GFX_MEM_STATEST_SHIFT 4 +#define AM33XX_GFX_MEM_STATEST_MASK (0x3 << 4) + +/* Used by RM_GFX_RSTCTRL, RM_GFX_RSTST */ +#define AM33XX_GFX_RST_SHIFT 0 +#define AM33XX_GFX_RST_MASK (1 << 0) + +/* Used by PRM_RSTST */ +#define AM33XX_GLOBAL_COLD_RST_SHIFT 0 +#define AM33XX_GLOBAL_COLD_RST_MASK (1 << 0) + +/* Used by PRM_RSTST */ +#define AM33XX_GLOBAL_WARM_SW_RST_SHIFT 1 +#define AM33XX_GLOBAL_WARM_SW_RST_MASK (1 << 1) + +/* Used by RM_WKUP_RSTST */ +#define AM33XX_ICECRUSHER_M3_RST_SHIFT 7 +#define AM33XX_ICECRUSHER_M3_RST_MASK (1 << 7) + +/* Used by RM_MPU_RSTST */ +#define AM33XX_ICECRUSHER_MPU_RST_SHIFT 6 +#define AM33XX_ICECRUSHER_MPU_RST_MASK (1 << 6) + +/* Used by PRM_RSTST */ +#define AM33XX_ICEPICK_RST_SHIFT 9 +#define AM33XX_ICEPICK_RST_MASK (1 << 9) + +/* Used by RM_PER_RSTCTRL */ +#define AM33XX_PRUSS_LRST_SHIFT 1 +#define AM33XX_PRUSS_LRST_MASK (1 << 1) + +/* Used by PM_PER_PWRSTCTRL */ +#define AM33XX_PRUSS_MEM_ONSTATE_SHIFT 5 +#define AM33XX_PRUSS_MEM_ONSTATE_MASK (0x3 << 5) + +/* Used by PM_PER_PWRSTCTRL */ +#define AM33XX_PRUSS_MEM_RETSTATE_SHIFT 7 +#define AM33XX_PRUSS_MEM_RETSTATE_MASK (1 << 7) + +/* Used by PM_PER_PWRSTST */ +#define AM33XX_PRUSS_MEM_STATEST_SHIFT 23 +#define AM33XX_PRUSS_MEM_STATEST_MASK (0x3 << 23) + +/* + * Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST, + * PM_WKUP_PWRSTST, PM_RTC_PWRSTST + */ +#define AM33XX_INTRANSITION_SHIFT 20 +#define AM33XX_INTRANSITION_MASK (1 << 20) + +/* Used by PM_CEFUSE_PWRSTST */ +#define AM33XX_LASTPOWERSTATEENTERED_SHIFT 24 +#define AM33XX_LASTPOWERSTATEENTERED_MASK (0x3 << 24) + +/* Used by PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_RTC_PWRSTCTRL */ +#define AM33XX_LOGICRETSTATE_SHIFT 2 +#define AM33XX_LOGICRETSTATE_MASK (1 << 2) + +/* Renamed from LOGICRETSTATE Used by PM_PER_PWRSTCTRL, PM_WKUP_PWRSTCTRL */ +#define AM33XX_LOGICRETSTATE_3_3_SHIFT 3 +#define AM33XX_LOGICRETSTATE_3_3_MASK (1 << 3) + +/* + * Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST, + * PM_WKUP_PWRSTST, PM_RTC_PWRSTST + */ +#define AM33XX_LOGICSTATEST_SHIFT 2 +#define AM33XX_LOGICSTATEST_MASK (1 << 2) + +/* + * Used by PM_GFX_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, PM_PER_PWRSTCTRL, + * PM_MPU_PWRSTCTRL, PM_WKUP_PWRSTCTRL, PM_RTC_PWRSTCTRL + */ +#define AM33XX_LOWPOWERSTATECHANGE_SHIFT 4 +#define AM33XX_LOWPOWERSTATECHANGE_MASK (1 << 4) + +/* Used by PM_MPU_PWRSTCTRL */ +#define AM33XX_MPU_L1_ONSTATE_SHIFT 18 +#define AM33XX_MPU_L1_ONSTATE_MASK (0x3 << 18) + +/* Used by PM_MPU_PWRSTCTRL */ +#define AM33XX_MPU_L1_RETSTATE_SHIFT 22 +#define AM33XX_MPU_L1_RETSTATE_MASK (1 << 22) + +/* Used by PM_MPU_PWRSTST */ +#define AM33XX_MPU_L1_STATEST_SHIFT 6 +#define AM33XX_MPU_L1_STATEST_MASK (0x3 << 6) + +/* Used by PM_MPU_PWRSTCTRL */ +#define AM33XX_MPU_L2_ONSTATE_SHIFT 20 +#define AM33XX_MPU_L2_ONSTATE_MASK (0x3 << 20) + +/* Used by PM_MPU_PWRSTCTRL */ +#define AM33XX_MPU_L2_RETSTATE_SHIFT 23 +#define AM33XX_MPU_L2_RETSTATE_MASK (1 << 23) + +/* Used by PM_MPU_PWRSTST */ +#define AM33XX_MPU_L2_STATEST_SHIFT 8 +#define AM33XX_MPU_L2_STATEST_MASK (0x3 << 8) + +/* Used by PM_MPU_PWRSTCTRL */ +#define AM33XX_MPU_RAM_ONSTATE_SHIFT 16 +#define AM33XX_MPU_RAM_ONSTATE_MASK (0x3 << 16) + +/* Used by PM_MPU_PWRSTCTRL */ +#define AM33XX_MPU_RAM_RETSTATE_SHIFT 24 +#define AM33XX_MPU_RAM_RETSTATE_MASK (1 << 24) + +/* Used by PM_MPU_PWRSTST */ +#define AM33XX_MPU_RAM_STATEST_SHIFT 4 +#define AM33XX_MPU_RAM_STATEST_MASK (0x3 << 4) + +/* Used by PRM_RSTST */ +#define AM33XX_MPU_SECURITY_VIOL_RST_SHIFT 2 +#define AM33XX_MPU_SECURITY_VIOL_RST_MASK (1 << 2) + +/* Used by PRM_SRAM_COUNT */ +#define AM33XX_PCHARGECNT_VALUE_SHIFT 0 +#define AM33XX_PCHARGECNT_VALUE_MASK (0x3f << 0) + +/* Used by RM_PER_RSTCTRL */ +#define AM33XX_PCI_LRST_SHIFT 0 +#define AM33XX_PCI_LRST_MASK (1 << 0) + +/* Renamed from PCI_LRST Used by RM_PER_RSTST */ +#define AM33XX_PCI_LRST_5_5_SHIFT 5 +#define AM33XX_PCI_LRST_5_5_MASK (1 << 5) + +/* Used by PM_PER_PWRSTCTRL */ +#define AM33XX_PER_MEM_ONSTATE_SHIFT 25 +#define AM33XX_PER_MEM_ONSTATE_MASK (0x3 << 25) + +/* Used by PM_PER_PWRSTCTRL */ +#define AM33XX_PER_MEM_RETSTATE_SHIFT 29 +#define AM33XX_PER_MEM_RETSTATE_MASK (1 << 29) + +/* Used by PM_PER_PWRSTST */ +#define AM33XX_PER_MEM_STATEST_SHIFT 17 +#define AM33XX_PER_MEM_STATEST_MASK (0x3 << 17) + +/* + * Used by PM_GFX_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, PM_PER_PWRSTCTRL, + * PM_MPU_PWRSTCTRL + */ +#define AM33XX_POWERSTATE_SHIFT 0 +#define AM33XX_POWERSTATE_MASK (0x3 << 0) + +/* Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST */ +#define AM33XX_POWERSTATEST_SHIFT 0 +#define AM33XX_POWERSTATEST_MASK (0x3 << 0) + +/* Used by PM_PER_PWRSTCTRL */ +#define AM33XX_RAM_MEM_ONSTATE_SHIFT 30 +#define AM33XX_RAM_MEM_ONSTATE_MASK (0x3 << 30) + +/* Used by PM_PER_PWRSTCTRL */ +#define AM33XX_RAM_MEM_RETSTATE_SHIFT 27 +#define AM33XX_RAM_MEM_RETSTATE_MASK (1 << 27) + +/* Used by PM_PER_PWRSTST */ +#define AM33XX_RAM_MEM_STATEST_SHIFT 21 +#define AM33XX_RAM_MEM_STATEST_MASK (0x3 << 21) + +/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */ +#define AM33XX_RETMODE_ENABLE_SHIFT 0 +#define AM33XX_RETMODE_ENABLE_MASK (1 << 0) + +/* Used by REVISION_PRM */ +#define AM33XX_REV_SHIFT 0 +#define AM33XX_REV_MASK (0xff << 0) + +/* Used by PRM_RSTTIME */ +#define AM33XX_RSTTIME1_SHIFT 0 +#define AM33XX_RSTTIME1_MASK (0xff << 0) + +/* Used by PRM_RSTTIME */ +#define AM33XX_RSTTIME2_SHIFT 8 +#define AM33XX_RSTTIME2_MASK (0x1f << 8) + +/* Used by PRM_RSTCTRL */ +#define AM33XX_RST_GLOBAL_COLD_SW_SHIFT 1 +#define AM33XX_RST_GLOBAL_COLD_SW_MASK (1 << 1) + +/* Used by PRM_RSTCTRL */ +#define AM33XX_RST_GLOBAL_WARM_SW_SHIFT 0 +#define AM33XX_RST_GLOBAL_WARM_SW_MASK (1 << 0) + +/* Used by PRM_SRAM_COUNT */ +#define AM33XX_SLPCNT_VALUE_SHIFT 16 +#define AM33XX_SLPCNT_VALUE_MASK (0xff << 16) + +/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */ +#define AM33XX_SRAMLDO_STATUS_SHIFT 8 +#define AM33XX_SRAMLDO_STATUS_MASK (1 << 8) + +/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */ +#define AM33XX_SRAM_IN_TRANSITION_SHIFT 9 +#define AM33XX_SRAM_IN_TRANSITION_MASK (1 << 9) + +/* Used by PRM_SRAM_COUNT */ +#define AM33XX_STARTUP_COUNT_SHIFT 24 +#define AM33XX_STARTUP_COUNT_MASK (0xff << 24) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_TRANSITION_EN_SHIFT 8 +#define AM33XX_TRANSITION_EN_MASK (1 << 8) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_TRANSITION_ST_SHIFT 8 +#define AM33XX_TRANSITION_ST_MASK (1 << 8) + +/* Used by PRM_SRAM_COUNT */ +#define AM33XX_VSETUPCNT_VALUE_SHIFT 8 +#define AM33XX_VSETUPCNT_VALUE_MASK (0xff << 8) + +/* Used by PRM_RSTST */ +#define AM33XX_WDT0_RST_SHIFT 3 +#define AM33XX_WDT0_RST_MASK (1 << 3) + +/* Used by PRM_RSTST */ +#define AM33XX_WDT1_RST_SHIFT 4 +#define AM33XX_WDT1_RST_MASK (1 << 4) + +/* Used by RM_WKUP_RSTCTRL */ +#define AM33XX_WKUP_M3_LRST_SHIFT 3 +#define AM33XX_WKUP_M3_LRST_MASK (1 << 3) + +/* Renamed from WKUP_M3_LRST Used by RM_WKUP_RSTST */ +#define AM33XX_WKUP_M3_LRST_5_5_SHIFT 5 +#define AM33XX_WKUP_M3_LRST_5_5_MASK (1 << 5) + +#endif diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 21cb74003a5..a0309dea679 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -302,11 +302,59 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask) OMAP3_PRM_IRQENABLE_MPU_OFFSET); } +/** + * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain + * + * Clear any previously-latched I/O wakeup events and ensure that the + * I/O wakeup gates are aligned with the current mux settings. Works + * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then + * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No + * return value. + */ +void omap3xxx_prm_reconfigure_io_chain(void) +{ + int i = 0; + + omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); + + omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) & + OMAP3430_ST_IO_CHAIN_MASK, + MAX_IOPAD_LATCH_TIME, i); + if (i == MAX_IOPAD_LATCH_TIME) + pr_warn("PRM: I/O chain clock line assertion timed out\n"); + + omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); + + omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD, + PM_WKST); + + omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST); +} + +/** + * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches + * + * Activates the I/O wakeup event latches and allows events logged by + * those latches to signal a wakeup event to the PRCM. For I/O + * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux + * registers, and omap3xxx_prm_reconfigure_io_chain() must be called. + * No return value. + */ +static void __init omap3xxx_prm_enable_io_wakeup(void) +{ + if (omap3_has_io_wakeup()) + omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, + PM_WKEN); +} + static int __init omap3xxx_prcm_init(void) { int ret = 0; if (cpu_is_omap34xx()) { + omap3xxx_prm_enable_io_wakeup(); ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); if (!ret) irq_set_status_flags(omap_prcm_event_to_irq("io"), diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index 70ac2a19dc5..c19d249b481 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -228,68 +228,6 @@ #ifndef __ASSEMBLER__ -/* - * Stub omap2xxx/omap3xxx functions so that common files - * continue to build when custom builds are used - */ -#if defined(CONFIG_ARCH_OMAP4) && !(defined(CONFIG_ARCH_OMAP2) || \ - defined(CONFIG_ARCH_OMAP3)) -static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function and " - "not suppose to be used on omap4\n"); - return 0; -} -static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function and " - "not suppose to be used on omap4\n"); -} -static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, - s16 module, s16 idx) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function and " - "not suppose to be used on omap4\n"); - return 0; -} -static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function and " - "not suppose to be used on omap4\n"); - return 0; -} -static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function and " - "not suppose to be used on omap4\n"); - return 0; -} -static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function and " - "not suppose to be used on omap4\n"); - return 0; -} -static inline int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function and " - "not suppose to be used on omap4\n"); - return 0; -} -static inline int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function and " - "not suppose to be used on omap4\n"); - return 0; -} -static inline int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, - u8 st_shift) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function and " - "not suppose to be used on omap4\n"); - return 0; -} -#else /* Power/reset management domain register get/set */ extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx); extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx); @@ -315,15 +253,15 @@ extern u32 omap3_prm_vcvp_read(u8 offset); extern void omap3_prm_vcvp_write(u32 val, u8 offset); extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); +extern void omap3xxx_prm_reconfigure_io_chain(void); + /* PRM interrupt-related functions */ extern void omap3xxx_prm_read_pending_irqs(unsigned long *events); extern void omap3xxx_prm_ocp_barrier(void); extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask); extern void omap3xxx_prm_restore_irqen(u32 *saved_mask); -#endif /* CONFIG_ARCH_OMAP4 */ - -#endif +#endif /* __ASSEMBLER */ /* * Bits common to specific registers diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c new file mode 100644 index 00000000000..e7dbb6cf125 --- /dev/null +++ b/arch/arm/mach-omap2/prm33xx.c @@ -0,0 +1,135 @@ +/* + * AM33XX PRM functions + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <plat/common.h> + +#include "common.h" +#include "prm33xx.h" +#include "prm-regbits-33xx.h" + +/* Read a register in a PRM instance */ +u32 am33xx_prm_read_reg(s16 inst, u16 idx) +{ + return __raw_readl(prm_base + inst + idx); +} + +/* Write into a register in a PRM instance */ +void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx) +{ + __raw_writel(val, prm_base + inst + idx); +} + +/* Read-modify-write a register in PRM. Caller must lock */ +u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx) +{ + u32 v; + + v = am33xx_prm_read_reg(inst, idx); + v &= ~mask; + v |= bits; + am33xx_prm_write_reg(v, inst, idx); + + return v; +} + +/** + * am33xx_prm_is_hardreset_asserted - read the HW reset line state of + * submodules contained in the hwmod module + * @shift: register bit shift corresponding to the reset line to check + * @inst: CM instance register offset (*_INST macro) + * @rstctrl_offs: RM_RSTCTRL register address offset for this module + * + * Returns 1 if the (sub)module hardreset line is currently asserted, + * 0 if the (sub)module hardreset line is not currently asserted, or + * -EINVAL upon parameter error. + */ +int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, u16 rstctrl_offs) +{ + u32 v; + + v = am33xx_prm_read_reg(inst, rstctrl_offs); + v &= 1 << shift; + v >>= shift; + + return v; +} + +/** + * am33xx_prm_assert_hardreset - assert the HW reset line of a submodule + * @shift: register bit shift corresponding to the reset line to assert + * @inst: CM instance register offset (*_INST macro) + * @rstctrl_reg: RM_RSTCTRL register address for this module + * + * Some IPs like dsp, ipu or iva contain processors that require an HW + * reset line to be asserted / deasserted in order to fully enable the + * IP. These modules may have multiple hard-reset lines that reset + * different 'submodules' inside the IP block. This function will + * place the submodule into reset. Returns 0 upon success or -EINVAL + * upon an argument error. + */ +int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs) +{ + u32 mask = 1 << shift; + + am33xx_prm_rmw_reg_bits(mask, mask, inst, rstctrl_offs); + + return 0; +} + +/** + * am33xx_prm_deassert_hardreset - deassert a submodule hardreset line and + * wait + * @shift: register bit shift corresponding to the reset line to deassert + * @inst: CM instance register offset (*_INST macro) + * @rstctrl_reg: RM_RSTCTRL register address for this module + * @rstst_reg: RM_RSTST register address for this module + * + * Some IPs like dsp, ipu or iva contain processors that require an HW + * reset line to be asserted / deasserted in order to fully enable the + * IP. These modules may have multiple hard-reset lines that reset + * different 'submodules' inside the IP block. This function will + * take the submodule out of reset and wait until the PRCM indicates + * that the reset has completed before returning. Returns 0 upon success or + * -EINVAL upon an argument error, -EEXIST if the submodule was already out + * of reset, or -EBUSY if the submodule did not exit reset promptly. + */ +int am33xx_prm_deassert_hardreset(u8 shift, s16 inst, + u16 rstctrl_offs, u16 rstst_offs) +{ + int c; + u32 mask = 1 << shift; + + /* Check the current status to avoid de-asserting the line twice */ + if (am33xx_prm_is_hardreset_asserted(shift, inst, rstctrl_offs) == 0) + return -EEXIST; + + /* Clear the reset status by writing 1 to the status bit */ + am33xx_prm_rmw_reg_bits(0xffffffff, mask, inst, rstst_offs); + /* de-assert the reset control line */ + am33xx_prm_rmw_reg_bits(mask, 0, inst, rstctrl_offs); + /* wait the status to be set */ + + omap_test_timeout(am33xx_prm_is_hardreset_asserted(shift, inst, + rstst_offs), + MAX_MODULE_HARDRESET_WAIT, c); + + return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; +} diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h new file mode 100644 index 00000000000..3f25c563a82 --- /dev/null +++ b/arch/arm/mach-omap2/prm33xx.h @@ -0,0 +1,129 @@ +/* + * AM33XX PRM instance offset macros + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_PRM33XX_H +#define __ARCH_ARM_MACH_OMAP2_PRM33XX_H + +#include "prcm-common.h" +#include "prm.h" + +#define AM33XX_PRM_BASE 0x44E00000 + +#define AM33XX_PRM_REGADDR(inst, reg) \ + AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRM_BASE + (inst) + (reg)) + + +/* PRM instances */ +#define AM33XX_PRM_OCP_SOCKET_MOD 0x0B00 +#define AM33XX_PRM_PER_MOD 0x0C00 +#define AM33XX_PRM_WKUP_MOD 0x0D00 +#define AM33XX_PRM_MPU_MOD 0x0E00 +#define AM33XX_PRM_DEVICE_MOD 0x0F00 +#define AM33XX_PRM_RTC_MOD 0x1000 +#define AM33XX_PRM_GFX_MOD 0x1100 +#define AM33XX_PRM_CEFUSE_MOD 0x1200 + +/* PRM */ + +/* PRM.OCP_SOCKET_PRM register offsets */ +#define AM33XX_REVISION_PRM_OFFSET 0x0000 +#define AM33XX_REVISION_PRM AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0000) +#define AM33XX_PRM_IRQSTATUS_MPU_OFFSET 0x0004 +#define AM33XX_PRM_IRQSTATUS_MPU AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0004) +#define AM33XX_PRM_IRQENABLE_MPU_OFFSET 0x0008 +#define AM33XX_PRM_IRQENABLE_MPU AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0008) +#define AM33XX_PRM_IRQSTATUS_M3_OFFSET 0x000c +#define AM33XX_PRM_IRQSTATUS_M3 AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x000c) +#define AM33XX_PRM_IRQENABLE_M3_OFFSET 0x0010 +#define AM33XX_PRM_IRQENABLE_M3 AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0010) + +/* PRM.PER_PRM register offsets */ +#define AM33XX_RM_PER_RSTCTRL_OFFSET 0x0000 +#define AM33XX_RM_PER_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0000) +#define AM33XX_RM_PER_RSTST_OFFSET 0x0004 +#define AM33XX_RM_PER_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0004) +#define AM33XX_PM_PER_PWRSTST_OFFSET 0x0008 +#define AM33XX_PM_PER_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0008) +#define AM33XX_PM_PER_PWRSTCTRL_OFFSET 0x000c +#define AM33XX_PM_PER_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x000c) + +/* PRM.WKUP_PRM register offsets */ +#define AM33XX_RM_WKUP_RSTCTRL_OFFSET 0x0000 +#define AM33XX_RM_WKUP_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0000) +#define AM33XX_PM_WKUP_PWRSTCTRL_OFFSET 0x0004 +#define AM33XX_PM_WKUP_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0004) +#define AM33XX_PM_WKUP_PWRSTST_OFFSET 0x0008 +#define AM33XX_PM_WKUP_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0008) +#define AM33XX_RM_WKUP_RSTST_OFFSET 0x000c +#define AM33XX_RM_WKUP_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x000c) + +/* PRM.MPU_PRM register offsets */ +#define AM33XX_PM_MPU_PWRSTCTRL_OFFSET 0x0000 +#define AM33XX_PM_MPU_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0000) +#define AM33XX_PM_MPU_PWRSTST_OFFSET 0x0004 +#define AM33XX_PM_MPU_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0004) +#define AM33XX_RM_MPU_RSTST_OFFSET 0x0008 +#define AM33XX_RM_MPU_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0008) + +/* PRM.DEVICE_PRM register offsets */ +#define AM33XX_PRM_RSTCTRL_OFFSET 0x0000 +#define AM33XX_PRM_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0000) +#define AM33XX_PRM_RSTTIME_OFFSET 0x0004 +#define AM33XX_PRM_RSTTIME AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0004) +#define AM33XX_PRM_RSTST_OFFSET 0x0008 +#define AM33XX_PRM_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0008) +#define AM33XX_PRM_SRAM_COUNT_OFFSET 0x000c +#define AM33XX_PRM_SRAM_COUNT AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x000c) +#define AM33XX_PRM_LDO_SRAM_CORE_SETUP_OFFSET 0x0010 +#define AM33XX_PRM_LDO_SRAM_CORE_SETUP AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0010) +#define AM33XX_PRM_LDO_SRAM_CORE_CTRL_OFFSET 0x0014 +#define AM33XX_PRM_LDO_SRAM_CORE_CTRL AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0014) +#define AM33XX_PRM_LDO_SRAM_MPU_SETUP_OFFSET 0x0018 +#define AM33XX_PRM_LDO_SRAM_MPU_SETUP AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0018) +#define AM33XX_PRM_LDO_SRAM_MPU_CTRL_OFFSET 0x001c +#define AM33XX_PRM_LDO_SRAM_MPU_CTRL AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x001c) + +/* PRM.RTC_PRM register offsets */ +#define AM33XX_PM_RTC_PWRSTCTRL_OFFSET 0x0000 +#define AM33XX_PM_RTC_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_RTC_MOD, 0x0000) +#define AM33XX_PM_RTC_PWRSTST_OFFSET 0x0004 +#define AM33XX_PM_RTC_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_RTC_MOD, 0x0004) + +/* PRM.GFX_PRM register offsets */ +#define AM33XX_PM_GFX_PWRSTCTRL_OFFSET 0x0000 +#define AM33XX_PM_GFX_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0000) +#define AM33XX_RM_GFX_RSTCTRL_OFFSET 0x0004 +#define AM33XX_RM_GFX_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0004) +#define AM33XX_PM_GFX_PWRSTST_OFFSET 0x0010 +#define AM33XX_PM_GFX_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0010) +#define AM33XX_RM_GFX_RSTST_OFFSET 0x0014 +#define AM33XX_RM_GFX_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0014) + +/* PRM.CEFUSE_PRM register offsets */ +#define AM33XX_PM_CEFUSE_PWRSTCTRL_OFFSET 0x0000 +#define AM33XX_PM_CEFUSE_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0000) +#define AM33XX_PM_CEFUSE_PWRSTST_OFFSET 0x0004 +#define AM33XX_PM_CEFUSE_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0004) + +extern u32 am33xx_prm_read_reg(s16 inst, u16 idx); +extern void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx); +extern u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); +extern void am33xx_prm_global_warm_sw_reset(void); +extern int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, + u16 rstctrl_offs); +extern int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs); +extern int am33xx_prm_deassert_hardreset(u8 shift, s16 inst, + u16 rstctrl_offs, u16 rstst_offs); +#endif diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index f106d21ff58..bb727c2d933 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -233,10 +233,71 @@ void omap44xx_prm_restore_irqen(u32 *saved_mask) OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); } +/** + * omap44xx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain + * + * Clear any previously-latched I/O wakeup events and ensure that the + * I/O wakeup gates are aligned with the current mux settings. Works + * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then + * deasserting WUCLKIN and waiting for WUCLKOUT to be deasserted. + * No return value. XXX Are the final two steps necessary? + */ +void omap44xx_prm_reconfigure_io_chain(void) +{ + int i = 0; + + /* Trigger WUCLKIN enable */ + omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, + OMAP4430_WUCLK_CTRL_MASK, + OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IO_PMCTRL_OFFSET); + omap_test_timeout( + (((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IO_PMCTRL_OFFSET) & + OMAP4430_WUCLK_STATUS_MASK) >> + OMAP4430_WUCLK_STATUS_SHIFT) == 1), + MAX_IOPAD_LATCH_TIME, i); + if (i == MAX_IOPAD_LATCH_TIME) + pr_warn("PRM: I/O chain clock line assertion timed out\n"); + + /* Trigger WUCLKIN disable */ + omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, 0x0, + OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IO_PMCTRL_OFFSET); + omap_test_timeout( + (((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IO_PMCTRL_OFFSET) & + OMAP4430_WUCLK_STATUS_MASK) >> + OMAP4430_WUCLK_STATUS_SHIFT) == 0), + MAX_IOPAD_LATCH_TIME, i); + if (i == MAX_IOPAD_LATCH_TIME) + pr_warn("PRM: I/O chain clock line deassertion timed out\n"); + + return; +} + +/** + * omap44xx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches + * + * Activates the I/O wakeup event latches and allows events logged by + * those latches to signal a wakeup event to the PRCM. For I/O wakeups + * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and + * omap44xx_prm_reconfigure_io_chain() must be called. No return value. + */ +static void __init omap44xx_prm_enable_io_wakeup(void) +{ + omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK, + OMAP4430_GLOBAL_WUEN_MASK, + OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IO_PMCTRL_OFFSET); +} + static int __init omap4xxx_prcm_init(void) { - if (cpu_is_omap44xx()) + if (cpu_is_omap44xx()) { + omap44xx_prm_enable_io_wakeup(); return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup); + } return 0; } subsys_initcall(omap4xxx_prcm_init); diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index 7978092946d..ee72ae6bd8c 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -763,6 +763,8 @@ extern u32 omap4_prm_vcvp_read(u8 offset); extern void omap4_prm_vcvp_write(u32 val, u8 offset); extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); +extern void omap44xx_prm_reconfigure_io_chain(void); + /* PRM interrupt-related functions */ extern void omap44xx_prm_read_pending_irqs(unsigned long *events); extern void omap44xx_prm_ocp_barrier(void); diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index dfe00ddb5c6..03b126d9ad9 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -85,7 +85,7 @@ static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc) unsigned long priority_pending[OMAP_PRCM_MAX_NR_PENDING_REG]; struct irq_chip *chip = irq_desc_get_chip(desc); unsigned int virtirq; - int nr_irqs = prcm_irq_setup->nr_regs * 32; + int nr_irq = prcm_irq_setup->nr_regs * 32; /* * If we are suspended, mask all interrupts from PRCM level, @@ -110,7 +110,7 @@ static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc) prcm_irq_setup->read_pending_irqs(pending); /* No bit set, then all IRQs are handled */ - if (find_first_bit(pending, nr_irqs) >= nr_irqs) + if (find_first_bit(pending, nr_irq) >= nr_irq) break; omap_prcm_events_filter_priority(pending, priority_pending); @@ -121,11 +121,11 @@ static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc) */ /* Serve priority events first */ - for_each_set_bit(virtirq, priority_pending, nr_irqs) + for_each_set_bit(virtirq, priority_pending, nr_irq) generic_handle_irq(prcm_irq_setup->base_irq + virtirq); /* Serve normal events next */ - for_each_set_bit(virtirq, pending, nr_irqs) + for_each_set_bit(virtirq, pending, nr_irq) generic_handle_irq(prcm_irq_setup->base_irq + virtirq); } if (chip->irq_ack) @@ -319,3 +319,65 @@ err: omap_prcm_irq_cleanup(); return -ENOMEM; } + +/* + * Stubbed functions so that common files continue to build when + * custom builds are used + * XXX These are temporary and should be removed at the earliest possible + * opportunity + */ +u32 __weak omap2_prm_read_mod_reg(s16 module, u16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); + return 0; +} + +void __weak omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); +} + +u32 __weak omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, + s16 module, s16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); + return 0; +} + +u32 __weak omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); + return 0; +} + +u32 __weak omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); + return 0; +} + +u32 __weak omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); + return 0; +} + +int __weak omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); + return 0; +} + +int __weak omap2_prm_assert_hardreset(s16 prm_mod, u8 shift) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); + return 0; +} + +int __weak omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, + u8 st_shift) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); + return 0; +} + diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c index 955566eefac..1da8f03c479 100644 --- a/arch/arm/mach-omap2/smartreflex-class3.c +++ b/arch/arm/mach-omap2/smartreflex-class3.c @@ -11,36 +11,37 @@ * published by the Free Software Foundation. */ -#include "smartreflex.h" +#include <linux/power/smartreflex.h> +#include "voltage.h" -static int sr_class3_enable(struct voltagedomain *voltdm) +static int sr_class3_enable(struct omap_sr *sr) { - unsigned long volt = voltdm_get_voltage(voltdm); + unsigned long volt = voltdm_get_voltage(sr->voltdm); if (!volt) { - pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n", - __func__, voltdm->name); + pr_warning("%s: Curr voltage unknown. Cannot enable %s\n", + __func__, sr->name); return -ENODATA; } - omap_vp_enable(voltdm); - return sr_enable(voltdm, volt); + omap_vp_enable(sr->voltdm); + return sr_enable(sr->voltdm, volt); } -static int sr_class3_disable(struct voltagedomain *voltdm, int is_volt_reset) +static int sr_class3_disable(struct omap_sr *sr, int is_volt_reset) { - sr_disable_errgen(voltdm); - omap_vp_disable(voltdm); - sr_disable(voltdm); + sr_disable_errgen(sr->voltdm); + omap_vp_disable(sr->voltdm); + sr_disable(sr->voltdm); if (is_volt_reset) - voltdm_reset(voltdm); + voltdm_reset(sr->voltdm); return 0; } -static int sr_class3_configure(struct voltagedomain *voltdm) +static int sr_class3_configure(struct omap_sr *sr) { - return sr_configure_errgen(voltdm); + return sr_configure_errgen(sr->voltdm); } /* SR class3 structure */ diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c deleted file mode 100644 index 008fbd7b935..00000000000 --- a/arch/arm/mach-omap2/smartreflex.c +++ /dev/null @@ -1,1165 +0,0 @@ -/* - * OMAP SmartReflex Voltage Control - * - * Author: Thara Gopinath <thara@ti.com> - * - * Copyright (C) 2010 Texas Instruments, Inc. - * Thara Gopinath <thara@ti.com> - * - * Copyright (C) 2008 Nokia Corporation - * Kalle Jokiniemi - * - * Copyright (C) 2007 Texas Instruments, Inc. - * Lesly A M <x0080970@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/debugfs.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/pm_runtime.h> - -#include "common.h" - -#include "pm.h" -#include "smartreflex.h" - -#define SMARTREFLEX_NAME_LEN 16 -#define NVALUE_NAME_LEN 40 -#define SR_DISABLE_TIMEOUT 200 - -struct omap_sr { - struct list_head node; - struct platform_device *pdev; - struct omap_sr_nvalue_table *nvalue_table; - struct voltagedomain *voltdm; - struct dentry *dbg_dir; - unsigned int irq; - int srid; - int ip_type; - int nvalue_count; - bool autocomp_active; - u32 clk_length; - u32 err_weight; - u32 err_minlimit; - u32 err_maxlimit; - u32 accum_data; - u32 senn_avgweight; - u32 senp_avgweight; - u32 senp_mod; - u32 senn_mod; - void __iomem *base; -}; - -/* sr_list contains all the instances of smartreflex module */ -static LIST_HEAD(sr_list); - -static struct omap_sr_class_data *sr_class; -static struct omap_sr_pmic_data *sr_pmic_data; -static struct dentry *sr_dbg_dir; - -static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value) -{ - __raw_writel(value, (sr->base + offset)); -} - -static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask, - u32 value) -{ - u32 reg_val; - - /* - * Smartreflex error config register is special as it contains - * certain status bits which if written a 1 into means a clear - * of those bits. So in order to make sure no accidental write of - * 1 happens to those status bits, do a clear of them in the read - * value. This mean this API doesn't rewrite values in these bits - * if they are currently set, but does allow the caller to write - * those bits. - */ - if (sr->ip_type == SR_TYPE_V1 && offset == ERRCONFIG_V1) - mask |= ERRCONFIG_STATUS_V1_MASK; - else if (sr->ip_type == SR_TYPE_V2 && offset == ERRCONFIG_V2) - mask |= ERRCONFIG_VPBOUNDINTST_V2; - - reg_val = __raw_readl(sr->base + offset); - reg_val &= ~mask; - - value &= mask; - - reg_val |= value; - - __raw_writel(reg_val, (sr->base + offset)); -} - -static inline u32 sr_read_reg(struct omap_sr *sr, unsigned offset) -{ - return __raw_readl(sr->base + offset); -} - -static struct omap_sr *_sr_lookup(struct voltagedomain *voltdm) -{ - struct omap_sr *sr_info; - - if (!voltdm) { - pr_err("%s: Null voltage domain passed!\n", __func__); - return ERR_PTR(-EINVAL); - } - - list_for_each_entry(sr_info, &sr_list, node) { - if (voltdm == sr_info->voltdm) - return sr_info; - } - - return ERR_PTR(-ENODATA); -} - -static irqreturn_t sr_interrupt(int irq, void *data) -{ - struct omap_sr *sr_info = data; - u32 status = 0; - - switch (sr_info->ip_type) { - case SR_TYPE_V1: - /* Read the status bits */ - status = sr_read_reg(sr_info, ERRCONFIG_V1); - - /* Clear them by writing back */ - sr_write_reg(sr_info, ERRCONFIG_V1, status); - break; - case SR_TYPE_V2: - /* Read the status bits */ - status = sr_read_reg(sr_info, IRQSTATUS); - - /* Clear them by writing back */ - sr_write_reg(sr_info, IRQSTATUS, status); - break; - default: - dev_err(&sr_info->pdev->dev, "UNKNOWN IP type %d\n", - sr_info->ip_type); - return IRQ_NONE; - } - - if (sr_class->notify) - sr_class->notify(sr_info->voltdm, status); - - return IRQ_HANDLED; -} - -static void sr_set_clk_length(struct omap_sr *sr) -{ - struct clk *sys_ck; - u32 sys_clk_speed; - - if (cpu_is_omap34xx()) - sys_ck = clk_get(NULL, "sys_ck"); - else - sys_ck = clk_get(NULL, "sys_clkin_ck"); - - if (IS_ERR(sys_ck)) { - dev_err(&sr->pdev->dev, "%s: unable to get sys clk\n", - __func__); - return; - } - - sys_clk_speed = clk_get_rate(sys_ck); - clk_put(sys_ck); - - switch (sys_clk_speed) { - case 12000000: - sr->clk_length = SRCLKLENGTH_12MHZ_SYSCLK; - break; - case 13000000: - sr->clk_length = SRCLKLENGTH_13MHZ_SYSCLK; - break; - case 19200000: - sr->clk_length = SRCLKLENGTH_19MHZ_SYSCLK; - break; - case 26000000: - sr->clk_length = SRCLKLENGTH_26MHZ_SYSCLK; - break; - case 38400000: - sr->clk_length = SRCLKLENGTH_38MHZ_SYSCLK; - break; - default: - dev_err(&sr->pdev->dev, "%s: Invalid sysclk value: %d\n", - __func__, sys_clk_speed); - break; - } -} - -static void sr_set_regfields(struct omap_sr *sr) -{ - /* - * For time being these values are defined in smartreflex.h - * and populated during init. May be they can be moved to board - * file or pmic specific data structure. In that case these structure - * fields will have to be populated using the pdata or pmic structure. - */ - if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - sr->err_weight = OMAP3430_SR_ERRWEIGHT; - sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT; - sr->accum_data = OMAP3430_SR_ACCUMDATA; - if (!(strcmp(sr->voltdm->name, "mpu"))) { - sr->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT; - sr->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT; - } else { - sr->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT; - sr->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT; - } - } -} - -static void sr_start_vddautocomp(struct omap_sr *sr) -{ - if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) { - dev_warn(&sr->pdev->dev, - "%s: smartreflex class driver not registered\n", - __func__); - return; - } - - if (!sr_class->enable(sr->voltdm)) - sr->autocomp_active = true; -} - -static void sr_stop_vddautocomp(struct omap_sr *sr) -{ - if (!sr_class || !(sr_class->disable)) { - dev_warn(&sr->pdev->dev, - "%s: smartreflex class driver not registered\n", - __func__); - return; - } - - if (sr->autocomp_active) { - sr_class->disable(sr->voltdm, 1); - sr->autocomp_active = false; - } -} - -/* - * This function handles the intializations which have to be done - * only when both sr device and class driver regiter has - * completed. This will be attempted to be called from both sr class - * driver register and sr device intializtion API's. Only one call - * will ultimately succeed. - * - * Currently this function registers interrupt handler for a particular SR - * if smartreflex class driver is already registered and has - * requested for interrupts and the SR interrupt line in present. - */ -static int sr_late_init(struct omap_sr *sr_info) -{ - char *name; - struct omap_sr_data *pdata = sr_info->pdev->dev.platform_data; - struct resource *mem; - int ret = 0; - - if (sr_class->notify && sr_class->notify_flags && sr_info->irq) { - name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name); - if (name == NULL) { - ret = -ENOMEM; - goto error; - } - ret = request_irq(sr_info->irq, sr_interrupt, - 0, name, sr_info); - if (ret) - goto error; - disable_irq(sr_info->irq); - } - - if (pdata && pdata->enable_on_init) - sr_start_vddautocomp(sr_info); - - return ret; - -error: - iounmap(sr_info->base); - mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, resource_size(mem)); - list_del(&sr_info->node); - dev_err(&sr_info->pdev->dev, "%s: ERROR in registering" - "interrupt handler. Smartreflex will" - "not function as desired\n", __func__); - kfree(name); - kfree(sr_info); - - return ret; -} - -static void sr_v1_disable(struct omap_sr *sr) -{ - int timeout = 0; - int errconf_val = ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST | - ERRCONFIG_MCUBOUNDINTST; - - /* Enable MCUDisableAcknowledge interrupt */ - sr_modify_reg(sr, ERRCONFIG_V1, - ERRCONFIG_MCUDISACKINTEN, ERRCONFIG_MCUDISACKINTEN); - - /* SRCONFIG - disable SR */ - sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0); - - /* Disable all other SR interrupts and clear the status as needed */ - if (sr_read_reg(sr, ERRCONFIG_V1) & ERRCONFIG_VPBOUNDINTST_V1) - errconf_val |= ERRCONFIG_VPBOUNDINTST_V1; - sr_modify_reg(sr, ERRCONFIG_V1, - (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN | - ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_VPBOUNDINTEN_V1), - errconf_val); - - /* - * Wait for SR to be disabled. - * wait until ERRCONFIG.MCUDISACKINTST = 1. Typical latency is 1us. - */ - omap_test_timeout((sr_read_reg(sr, ERRCONFIG_V1) & - ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT, - timeout); - - if (timeout >= SR_DISABLE_TIMEOUT) - dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n", - __func__); - - /* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */ - sr_modify_reg(sr, ERRCONFIG_V1, ERRCONFIG_MCUDISACKINTEN, - ERRCONFIG_MCUDISACKINTST); -} - -static void sr_v2_disable(struct omap_sr *sr) -{ - int timeout = 0; - - /* Enable MCUDisableAcknowledge interrupt */ - sr_write_reg(sr, IRQENABLE_SET, IRQENABLE_MCUDISABLEACKINT); - - /* SRCONFIG - disable SR */ - sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0); - - /* - * Disable all other SR interrupts and clear the status - * write to status register ONLY on need basis - only if status - * is set. - */ - if (sr_read_reg(sr, ERRCONFIG_V2) & ERRCONFIG_VPBOUNDINTST_V2) - sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2, - ERRCONFIG_VPBOUNDINTST_V2); - else - sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2, - 0x0); - sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT | - IRQENABLE_MCUVALIDINT | - IRQENABLE_MCUBOUNDSINT)); - sr_write_reg(sr, IRQSTATUS, (IRQSTATUS_MCUACCUMINT | - IRQSTATUS_MCVALIDINT | - IRQSTATUS_MCBOUNDSINT)); - - /* - * Wait for SR to be disabled. - * wait until IRQSTATUS.MCUDISACKINTST = 1. Typical latency is 1us. - */ - omap_test_timeout((sr_read_reg(sr, IRQSTATUS) & - IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT, - timeout); - - if (timeout >= SR_DISABLE_TIMEOUT) - dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n", - __func__); - - /* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */ - sr_write_reg(sr, IRQENABLE_CLR, IRQENABLE_MCUDISABLEACKINT); - sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT); -} - -static u32 sr_retrieve_nvalue(struct omap_sr *sr, u32 efuse_offs) -{ - int i; - - if (!sr->nvalue_table) { - dev_warn(&sr->pdev->dev, "%s: Missing ntarget value table\n", - __func__); - return 0; - } - - for (i = 0; i < sr->nvalue_count; i++) { - if (sr->nvalue_table[i].efuse_offs == efuse_offs) - return sr->nvalue_table[i].nvalue; - } - - return 0; -} - -/* Public Functions */ - -/** - * sr_configure_errgen() - Configures the smrtreflex to perform AVS using the - * error generator module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the smartreflex class driver to - * configure the error generator module inside the smartreflex module. - * SR settings if using the ERROR module inside Smartreflex. - * SR CLASS 3 by default uses only the ERROR module where as - * SR CLASS 2 can choose between ERROR module and MINMAXAVG - * module. Returns 0 on success and error value in case of failure. - */ -int sr_configure_errgen(struct voltagedomain *voltdm) -{ - u32 sr_config, sr_errconfig, errconfig_offs; - u32 vpboundint_en, vpboundint_st; - u32 senp_en = 0, senn_en = 0; - u8 senp_shift, senn_shift; - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return PTR_ERR(sr); - } - - if (!sr->clk_length) - sr_set_clk_length(sr); - - senp_en = sr->senp_mod; - senn_en = sr->senn_mod; - - sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) | - SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN; - - switch (sr->ip_type) { - case SR_TYPE_V1: - sr_config |= SRCONFIG_DELAYCTRL; - senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT; - senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT; - errconfig_offs = ERRCONFIG_V1; - vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1; - vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1; - break; - case SR_TYPE_V2: - senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT; - senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT; - errconfig_offs = ERRCONFIG_V2; - vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2; - vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2; - break; - default: - dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex" - "module without specifying the ip\n", __func__); - return -EINVAL; - } - - sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift)); - sr_write_reg(sr, SRCONFIG, sr_config); - sr_errconfig = (sr->err_weight << ERRCONFIG_ERRWEIGHT_SHIFT) | - (sr->err_maxlimit << ERRCONFIG_ERRMAXLIMIT_SHIFT) | - (sr->err_minlimit << ERRCONFIG_ERRMINLIMIT_SHIFT); - sr_modify_reg(sr, errconfig_offs, (SR_ERRWEIGHT_MASK | - SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK), - sr_errconfig); - - /* Enabling the interrupts if the ERROR module is used */ - sr_modify_reg(sr, errconfig_offs, (vpboundint_en | vpboundint_st), - vpboundint_en); - - return 0; -} - -/** - * sr_disable_errgen() - Disables SmartReflex AVS module's errgen component - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the smartreflex class driver to - * disable the error generator module inside the smartreflex module. - * - * Returns 0 on success and error value in case of failure. - */ -int sr_disable_errgen(struct voltagedomain *voltdm) -{ - u32 errconfig_offs; - u32 vpboundint_en, vpboundint_st; - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return PTR_ERR(sr); - } - - switch (sr->ip_type) { - case SR_TYPE_V1: - errconfig_offs = ERRCONFIG_V1; - vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1; - vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1; - break; - case SR_TYPE_V2: - errconfig_offs = ERRCONFIG_V2; - vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2; - vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2; - break; - default: - dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex" - "module without specifying the ip\n", __func__); - return -EINVAL; - } - - /* Disable the interrupts of ERROR module */ - sr_modify_reg(sr, errconfig_offs, vpboundint_en | vpboundint_st, 0); - - /* Disable the Sensor and errorgen */ - sr_modify_reg(sr, SRCONFIG, SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN, 0); - - return 0; -} - -/** - * sr_configure_minmax() - Configures the smrtreflex to perform AVS using the - * minmaxavg module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the smartreflex class driver to - * configure the minmaxavg module inside the smartreflex module. - * SR settings if using the ERROR module inside Smartreflex. - * SR CLASS 3 by default uses only the ERROR module where as - * SR CLASS 2 can choose between ERROR module and MINMAXAVG - * module. Returns 0 on success and error value in case of failure. - */ -int sr_configure_minmax(struct voltagedomain *voltdm) -{ - u32 sr_config, sr_avgwt; - u32 senp_en = 0, senn_en = 0; - u8 senp_shift, senn_shift; - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return PTR_ERR(sr); - } - - if (!sr->clk_length) - sr_set_clk_length(sr); - - senp_en = sr->senp_mod; - senn_en = sr->senn_mod; - - sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) | - SRCONFIG_SENENABLE | - (sr->accum_data << SRCONFIG_ACCUMDATA_SHIFT); - - switch (sr->ip_type) { - case SR_TYPE_V1: - sr_config |= SRCONFIG_DELAYCTRL; - senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT; - senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT; - break; - case SR_TYPE_V2: - senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT; - senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT; - break; - default: - dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex" - "module without specifying the ip\n", __func__); - return -EINVAL; - } - - sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift)); - sr_write_reg(sr, SRCONFIG, sr_config); - sr_avgwt = (sr->senp_avgweight << AVGWEIGHT_SENPAVGWEIGHT_SHIFT) | - (sr->senn_avgweight << AVGWEIGHT_SENNAVGWEIGHT_SHIFT); - sr_write_reg(sr, AVGWEIGHT, sr_avgwt); - - /* - * Enabling the interrupts if MINMAXAVG module is used. - * TODO: check if all the interrupts are mandatory - */ - switch (sr->ip_type) { - case SR_TYPE_V1: - sr_modify_reg(sr, ERRCONFIG_V1, - (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN | - ERRCONFIG_MCUBOUNDINTEN), - (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUACCUMINTST | - ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST | - ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST)); - break; - case SR_TYPE_V2: - sr_write_reg(sr, IRQSTATUS, - IRQSTATUS_MCUACCUMINT | IRQSTATUS_MCVALIDINT | - IRQSTATUS_MCBOUNDSINT | IRQSTATUS_MCUDISABLEACKINT); - sr_write_reg(sr, IRQENABLE_SET, - IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT | - IRQENABLE_MCUBOUNDSINT | IRQENABLE_MCUDISABLEACKINT); - break; - default: - dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex" - "module without specifying the ip\n", __func__); - return -EINVAL; - } - - return 0; -} - -/** - * sr_enable() - Enables the smartreflex module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * @volt: The voltage at which the Voltage domain associated with - * the smartreflex module is operating at. - * This is required only to program the correct Ntarget value. - * - * This API is to be called from the smartreflex class driver to - * enable a smartreflex module. Returns 0 on success. Returns error - * value if the voltage passed is wrong or if ntarget value is wrong. - */ -int sr_enable(struct voltagedomain *voltdm, unsigned long volt) -{ - struct omap_volt_data *volt_data; - struct omap_sr *sr = _sr_lookup(voltdm); - u32 nvalue_reciprocal; - int ret; - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return PTR_ERR(sr); - } - - volt_data = omap_voltage_get_voltdata(sr->voltdm, volt); - - if (IS_ERR(volt_data)) { - dev_warn(&sr->pdev->dev, "%s: Unable to get voltage table" - "for nominal voltage %ld\n", __func__, volt); - return PTR_ERR(volt_data); - } - - nvalue_reciprocal = sr_retrieve_nvalue(sr, volt_data->sr_efuse_offs); - - if (!nvalue_reciprocal) { - dev_warn(&sr->pdev->dev, "%s: NVALUE = 0 at voltage %ld\n", - __func__, volt); - return -ENODATA; - } - - /* errminlimit is opp dependent and hence linked to voltage */ - sr->err_minlimit = volt_data->sr_errminlimit; - - pm_runtime_get_sync(&sr->pdev->dev); - - /* Check if SR is already enabled. If yes do nothing */ - if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) - return 0; - - /* Configure SR */ - ret = sr_class->configure(voltdm); - if (ret) - return ret; - - sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal); - - /* SRCONFIG - enable SR */ - sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE); - return 0; -} - -/** - * sr_disable() - Disables the smartreflex module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the smartreflex class driver to - * disable a smartreflex module. - */ -void sr_disable(struct voltagedomain *voltdm) -{ - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return; - } - - /* Check if SR clocks are already disabled. If yes do nothing */ - if (pm_runtime_suspended(&sr->pdev->dev)) - return; - - /* - * Disable SR if only it is indeed enabled. Else just - * disable the clocks. - */ - if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) { - switch (sr->ip_type) { - case SR_TYPE_V1: - sr_v1_disable(sr); - break; - case SR_TYPE_V2: - sr_v2_disable(sr); - break; - default: - dev_err(&sr->pdev->dev, "UNKNOWN IP type %d\n", - sr->ip_type); - } - } - - pm_runtime_put_sync_suspend(&sr->pdev->dev); -} - -/** - * sr_register_class() - API to register a smartreflex class parameters. - * @class_data: The structure containing various sr class specific data. - * - * This API is to be called by the smartreflex class driver to register itself - * with the smartreflex driver during init. Returns 0 on success else the - * error value. - */ -int sr_register_class(struct omap_sr_class_data *class_data) -{ - struct omap_sr *sr_info; - - if (!class_data) { - pr_warning("%s:, Smartreflex class data passed is NULL\n", - __func__); - return -EINVAL; - } - - if (sr_class) { - pr_warning("%s: Smartreflex class driver already registered\n", - __func__); - return -EBUSY; - } - - sr_class = class_data; - - /* - * Call into late init to do intializations that require - * both sr driver and sr class driver to be initiallized. - */ - list_for_each_entry(sr_info, &sr_list, node) - sr_late_init(sr_info); - - return 0; -} - -/** - * omap_sr_enable() - API to enable SR clocks and to call into the - * registered smartreflex class enable API. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the kernel in order to enable - * a particular smartreflex module. This API will do the initial - * configurations to turn on the smartreflex module and in turn call - * into the registered smartreflex class enable API. - */ -void omap_sr_enable(struct voltagedomain *voltdm) -{ - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return; - } - - if (!sr->autocomp_active) - return; - - if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) { - dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not" - "registered\n", __func__); - return; - } - - sr_class->enable(voltdm); -} - -/** - * omap_sr_disable() - API to disable SR without resetting the voltage - * processor voltage - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the kernel in order to disable - * a particular smartreflex module. This API will in turn call - * into the registered smartreflex class disable API. This API will tell - * the smartreflex class disable not to reset the VP voltage after - * disabling smartreflex. - */ -void omap_sr_disable(struct voltagedomain *voltdm) -{ - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return; - } - - if (!sr->autocomp_active) - return; - - if (!sr_class || !(sr_class->disable)) { - dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not" - "registered\n", __func__); - return; - } - - sr_class->disable(voltdm, 0); -} - -/** - * omap_sr_disable_reset_volt() - API to disable SR and reset the - * voltage processor voltage - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the kernel in order to disable - * a particular smartreflex module. This API will in turn call - * into the registered smartreflex class disable API. This API will tell - * the smartreflex class disable to reset the VP voltage after - * disabling smartreflex. - */ -void omap_sr_disable_reset_volt(struct voltagedomain *voltdm) -{ - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return; - } - - if (!sr->autocomp_active) - return; - - if (!sr_class || !(sr_class->disable)) { - dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not" - "registered\n", __func__); - return; - } - - sr_class->disable(voltdm, 1); -} - -/** - * omap_sr_register_pmic() - API to register pmic specific info. - * @pmic_data: The structure containing pmic specific data. - * - * This API is to be called from the PMIC specific code to register with - * smartreflex driver pmic specific info. Currently the only info required - * is the smartreflex init on the PMIC side. - */ -void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data) -{ - if (!pmic_data) { - pr_warning("%s: Trying to register NULL PMIC data structure" - "with smartreflex\n", __func__); - return; - } - - sr_pmic_data = pmic_data; -} - -/* PM Debug FS entries to enable and disable smartreflex. */ -static int omap_sr_autocomp_show(void *data, u64 *val) -{ - struct omap_sr *sr_info = data; - - if (!sr_info) { - pr_warning("%s: omap_sr struct not found\n", __func__); - return -EINVAL; - } - - *val = sr_info->autocomp_active; - - return 0; -} - -static int omap_sr_autocomp_store(void *data, u64 val) -{ - struct omap_sr *sr_info = data; - - if (!sr_info) { - pr_warning("%s: omap_sr struct not found\n", __func__); - return -EINVAL; - } - - /* Sanity check */ - if (val > 1) { - pr_warning("%s: Invalid argument %lld\n", __func__, val); - return -EINVAL; - } - - /* control enable/disable only if there is a delta in value */ - if (sr_info->autocomp_active != val) { - if (!val) - sr_stop_vddautocomp(sr_info); - else - sr_start_vddautocomp(sr_info); - } - - return 0; -} - -DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show, - omap_sr_autocomp_store, "%llu\n"); - -static int __init omap_sr_probe(struct platform_device *pdev) -{ - struct omap_sr *sr_info; - struct omap_sr_data *pdata = pdev->dev.platform_data; - struct resource *mem, *irq; - struct dentry *nvalue_dir; - struct omap_volt_data *volt_data; - int i, ret = 0; - char *name; - - sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL); - if (!sr_info) { - dev_err(&pdev->dev, "%s: unable to allocate sr_info\n", - __func__); - return -ENOMEM; - } - - platform_set_drvdata(pdev, sr_info); - - if (!pdata) { - dev_err(&pdev->dev, "%s: platform data missing\n", __func__); - ret = -EINVAL; - goto err_free_devinfo; - } - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - dev_err(&pdev->dev, "%s: no mem resource\n", __func__); - ret = -ENODEV; - goto err_free_devinfo; - } - - mem = request_mem_region(mem->start, resource_size(mem), - dev_name(&pdev->dev)); - if (!mem) { - dev_err(&pdev->dev, "%s: no mem region\n", __func__); - ret = -EBUSY; - goto err_free_devinfo; - } - - irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - - pm_runtime_enable(&pdev->dev); - pm_runtime_irq_safe(&pdev->dev); - - sr_info->pdev = pdev; - sr_info->srid = pdev->id; - sr_info->voltdm = pdata->voltdm; - sr_info->nvalue_table = pdata->nvalue_table; - sr_info->nvalue_count = pdata->nvalue_count; - sr_info->senn_mod = pdata->senn_mod; - sr_info->senp_mod = pdata->senp_mod; - sr_info->autocomp_active = false; - sr_info->ip_type = pdata->ip_type; - sr_info->base = ioremap(mem->start, resource_size(mem)); - if (!sr_info->base) { - dev_err(&pdev->dev, "%s: ioremap fail\n", __func__); - ret = -ENOMEM; - goto err_release_region; - } - - if (irq) - sr_info->irq = irq->start; - - sr_set_clk_length(sr_info); - sr_set_regfields(sr_info); - - list_add(&sr_info->node, &sr_list); - - /* - * Call into late init to do intializations that require - * both sr driver and sr class driver to be initiallized. - */ - if (sr_class) { - ret = sr_late_init(sr_info); - if (ret) { - pr_warning("%s: Error in SR late init\n", __func__); - goto err_iounmap; - } - } - - dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__); - if (!sr_dbg_dir) { - sr_dbg_dir = debugfs_create_dir("smartreflex", NULL); - if (IS_ERR_OR_NULL(sr_dbg_dir)) { - ret = PTR_ERR(sr_dbg_dir); - pr_err("%s:sr debugfs dir creation failed(%d)\n", - __func__, ret); - goto err_iounmap; - } - } - - name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name); - if (!name) { - dev_err(&pdev->dev, "%s: Unable to alloc debugfs name\n", - __func__); - ret = -ENOMEM; - goto err_iounmap; - } - sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir); - kfree(name); - if (IS_ERR_OR_NULL(sr_info->dbg_dir)) { - dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n", - __func__); - ret = PTR_ERR(sr_info->dbg_dir); - goto err_iounmap; - } - - (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, - sr_info->dbg_dir, (void *)sr_info, &pm_sr_fops); - (void) debugfs_create_x32("errweight", S_IRUGO, sr_info->dbg_dir, - &sr_info->err_weight); - (void) debugfs_create_x32("errmaxlimit", S_IRUGO, sr_info->dbg_dir, - &sr_info->err_maxlimit); - (void) debugfs_create_x32("errminlimit", S_IRUGO, sr_info->dbg_dir, - &sr_info->err_minlimit); - - nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir); - if (IS_ERR_OR_NULL(nvalue_dir)) { - dev_err(&pdev->dev, "%s: Unable to create debugfs directory" - "for n-values\n", __func__); - ret = PTR_ERR(nvalue_dir); - goto err_debugfs; - } - - omap_voltage_get_volttable(sr_info->voltdm, &volt_data); - if (!volt_data) { - dev_warn(&pdev->dev, "%s: No Voltage table for the" - " corresponding vdd vdd_%s. Cannot create debugfs" - "entries for n-values\n", - __func__, sr_info->voltdm->name); - ret = -ENODATA; - goto err_debugfs; - } - - for (i = 0; i < sr_info->nvalue_count; i++) { - char name[NVALUE_NAME_LEN + 1]; - - snprintf(name, sizeof(name), "volt_%d", - volt_data[i].volt_nominal); - (void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir, - &(sr_info->nvalue_table[i].nvalue)); - } - - return ret; - -err_debugfs: - debugfs_remove_recursive(sr_info->dbg_dir); -err_iounmap: - list_del(&sr_info->node); - iounmap(sr_info->base); -err_release_region: - release_mem_region(mem->start, resource_size(mem)); -err_free_devinfo: - kfree(sr_info); - - return ret; -} - -static int __devexit omap_sr_remove(struct platform_device *pdev) -{ - struct omap_sr_data *pdata = pdev->dev.platform_data; - struct omap_sr *sr_info; - struct resource *mem; - - if (!pdata) { - dev_err(&pdev->dev, "%s: platform data missing\n", __func__); - return -EINVAL; - } - - sr_info = _sr_lookup(pdata->voltdm); - if (IS_ERR(sr_info)) { - dev_warn(&pdev->dev, "%s: omap_sr struct not found\n", - __func__); - return PTR_ERR(sr_info); - } - - if (sr_info->autocomp_active) - sr_stop_vddautocomp(sr_info); - if (sr_info->dbg_dir) - debugfs_remove_recursive(sr_info->dbg_dir); - - list_del(&sr_info->node); - iounmap(sr_info->base); - kfree(sr_info); - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, resource_size(mem)); - - return 0; -} - -static void __devexit omap_sr_shutdown(struct platform_device *pdev) -{ - struct omap_sr_data *pdata = pdev->dev.platform_data; - struct omap_sr *sr_info; - - if (!pdata) { - dev_err(&pdev->dev, "%s: platform data missing\n", __func__); - return; - } - - sr_info = _sr_lookup(pdata->voltdm); - if (IS_ERR(sr_info)) { - dev_warn(&pdev->dev, "%s: omap_sr struct not found\n", - __func__); - return; - } - - if (sr_info->autocomp_active) - sr_stop_vddautocomp(sr_info); - - return; -} - -static struct platform_driver smartreflex_driver = { - .remove = __devexit_p(omap_sr_remove), - .shutdown = __devexit_p(omap_sr_shutdown), - .driver = { - .name = "smartreflex", - }, -}; - -static int __init sr_init(void) -{ - int ret = 0; - - /* - * sr_init is a late init. If by then a pmic specific API is not - * registered either there is no need for anything to be done on - * the PMIC side or somebody has forgotten to register a PMIC - * handler. Warn for the second condition. - */ - if (sr_pmic_data && sr_pmic_data->sr_pmic_init) - sr_pmic_data->sr_pmic_init(); - else - pr_warning("%s: No PMIC hook to init smartreflex\n", __func__); - - ret = platform_driver_probe(&smartreflex_driver, omap_sr_probe); - if (ret) { - pr_err("%s: platform driver register failed for SR\n", - __func__); - return ret; - } - - return 0; -} -late_initcall(sr_init); - -static void __exit sr_exit(void) -{ - platform_driver_unregister(&smartreflex_driver); -} -module_exit(sr_exit); - -MODULE_DESCRIPTION("OMAP Smartreflex Driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRIVER_NAME); -MODULE_AUTHOR("Texas Instruments Inc"); diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h deleted file mode 100644 index 5809141171f..00000000000 --- a/arch/arm/mach-omap2/smartreflex.h +++ /dev/null @@ -1,256 +0,0 @@ -/* - * OMAP Smartreflex Defines and Routines - * - * Author: Thara Gopinath <thara@ti.com> - * - * Copyright (C) 2010 Texas Instruments, Inc. - * Thara Gopinath <thara@ti.com> - * - * Copyright (C) 2008 Nokia Corporation - * Kalle Jokiniemi - * - * Copyright (C) 2007 Texas Instruments, Inc. - * Lesly A M <x0080970@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARM_OMAP_SMARTREFLEX_H -#define __ASM_ARM_OMAP_SMARTREFLEX_H - -#include <linux/platform_device.h> - -#include "voltage.h" - -/* - * Different Smartreflex IPs version. The v1 is the 65nm version used in - * OMAP3430. The v2 is the update for the 45nm version of the IP - * used in OMAP3630 and OMAP4430 - */ -#define SR_TYPE_V1 1 -#define SR_TYPE_V2 2 - -/* SMART REFLEX REG ADDRESS OFFSET */ -#define SRCONFIG 0x00 -#define SRSTATUS 0x04 -#define SENVAL 0x08 -#define SENMIN 0x0C -#define SENMAX 0x10 -#define SENAVG 0x14 -#define AVGWEIGHT 0x18 -#define NVALUERECIPROCAL 0x1c -#define SENERROR_V1 0x20 -#define ERRCONFIG_V1 0x24 -#define IRQ_EOI 0x20 -#define IRQSTATUS_RAW 0x24 -#define IRQSTATUS 0x28 -#define IRQENABLE_SET 0x2C -#define IRQENABLE_CLR 0x30 -#define SENERROR_V2 0x34 -#define ERRCONFIG_V2 0x38 - -/* Bit/Shift Positions */ - -/* SRCONFIG */ -#define SRCONFIG_ACCUMDATA_SHIFT 22 -#define SRCONFIG_SRCLKLENGTH_SHIFT 12 -#define SRCONFIG_SENNENABLE_V1_SHIFT 5 -#define SRCONFIG_SENPENABLE_V1_SHIFT 3 -#define SRCONFIG_SENNENABLE_V2_SHIFT 1 -#define SRCONFIG_SENPENABLE_V2_SHIFT 0 -#define SRCONFIG_CLKCTRL_SHIFT 0 - -#define SRCONFIG_ACCUMDATA_MASK (0x3ff << 22) - -#define SRCONFIG_SRENABLE BIT(11) -#define SRCONFIG_SENENABLE BIT(10) -#define SRCONFIG_ERRGEN_EN BIT(9) -#define SRCONFIG_MINMAXAVG_EN BIT(8) -#define SRCONFIG_DELAYCTRL BIT(2) - -/* AVGWEIGHT */ -#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT 2 -#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT 0 - -/* NVALUERECIPROCAL */ -#define NVALUERECIPROCAL_SENPGAIN_SHIFT 20 -#define NVALUERECIPROCAL_SENNGAIN_SHIFT 16 -#define NVALUERECIPROCAL_RNSENP_SHIFT 8 -#define NVALUERECIPROCAL_RNSENN_SHIFT 0 - -/* ERRCONFIG */ -#define ERRCONFIG_ERRWEIGHT_SHIFT 16 -#define ERRCONFIG_ERRMAXLIMIT_SHIFT 8 -#define ERRCONFIG_ERRMINLIMIT_SHIFT 0 - -#define SR_ERRWEIGHT_MASK (0x07 << 16) -#define SR_ERRMAXLIMIT_MASK (0xff << 8) -#define SR_ERRMINLIMIT_MASK (0xff << 0) - -#define ERRCONFIG_VPBOUNDINTEN_V1 BIT(31) -#define ERRCONFIG_VPBOUNDINTST_V1 BIT(30) -#define ERRCONFIG_MCUACCUMINTEN BIT(29) -#define ERRCONFIG_MCUACCUMINTST BIT(28) -#define ERRCONFIG_MCUVALIDINTEN BIT(27) -#define ERRCONFIG_MCUVALIDINTST BIT(26) -#define ERRCONFIG_MCUBOUNDINTEN BIT(25) -#define ERRCONFIG_MCUBOUNDINTST BIT(24) -#define ERRCONFIG_MCUDISACKINTEN BIT(23) -#define ERRCONFIG_VPBOUNDINTST_V2 BIT(23) -#define ERRCONFIG_MCUDISACKINTST BIT(22) -#define ERRCONFIG_VPBOUNDINTEN_V2 BIT(22) - -#define ERRCONFIG_STATUS_V1_MASK (ERRCONFIG_VPBOUNDINTST_V1 | \ - ERRCONFIG_MCUACCUMINTST | \ - ERRCONFIG_MCUVALIDINTST | \ - ERRCONFIG_MCUBOUNDINTST | \ - ERRCONFIG_MCUDISACKINTST) -/* IRQSTATUS */ -#define IRQSTATUS_MCUACCUMINT BIT(3) -#define IRQSTATUS_MCVALIDINT BIT(2) -#define IRQSTATUS_MCBOUNDSINT BIT(1) -#define IRQSTATUS_MCUDISABLEACKINT BIT(0) - -/* IRQENABLE_SET and IRQENABLE_CLEAR */ -#define IRQENABLE_MCUACCUMINT BIT(3) -#define IRQENABLE_MCUVALIDINT BIT(2) -#define IRQENABLE_MCUBOUNDSINT BIT(1) -#define IRQENABLE_MCUDISABLEACKINT BIT(0) - -/* Common Bit values */ - -#define SRCLKLENGTH_12MHZ_SYSCLK 0x3c -#define SRCLKLENGTH_13MHZ_SYSCLK 0x41 -#define SRCLKLENGTH_19MHZ_SYSCLK 0x60 -#define SRCLKLENGTH_26MHZ_SYSCLK 0x82 -#define SRCLKLENGTH_38MHZ_SYSCLK 0xC0 - -/* - * 3430 specific values. Maybe these should be passed from board file or - * pmic structures. - */ -#define OMAP3430_SR_ACCUMDATA 0x1f4 - -#define OMAP3430_SR1_SENPAVGWEIGHT 0x03 -#define OMAP3430_SR1_SENNAVGWEIGHT 0x03 - -#define OMAP3430_SR2_SENPAVGWEIGHT 0x01 -#define OMAP3430_SR2_SENNAVGWEIGHT 0x01 - -#define OMAP3430_SR_ERRWEIGHT 0x04 -#define OMAP3430_SR_ERRMAXLIMIT 0x02 - -/** - * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass - * pmic specific info to smartreflex driver - * - * @sr_pmic_init: API to initialize smartreflex on the PMIC side. - */ -struct omap_sr_pmic_data { - void (*sr_pmic_init) (void); -}; - -/** - * struct omap_smartreflex_dev_attr - Smartreflex Device attribute. - * - * @sensor_voltdm_name: Name of voltdomain of SR instance - */ -struct omap_smartreflex_dev_attr { - const char *sensor_voltdm_name; -}; - -#ifdef CONFIG_OMAP_SMARTREFLEX -/* - * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR. - * The smartreflex class driver should pass the class type. - * Should be used to populate the class_type field of the - * omap_smartreflex_class_data structure. - */ -#define SR_CLASS1 0x1 -#define SR_CLASS2 0x2 -#define SR_CLASS3 0x3 - -/** - * struct omap_sr_class_data - Smartreflex class driver info - * - * @enable: API to enable a particular class smaartreflex. - * @disable: API to disable a particular class smartreflex. - * @configure: API to configure a particular class smartreflex. - * @notify: API to notify the class driver about an event in SR. - * Not needed for class3. - * @notify_flags: specify the events to be notified to the class driver - * @class_type: specify which smartreflex class. - * Can be used by the SR driver to take any class - * based decisions. - */ -struct omap_sr_class_data { - int (*enable)(struct voltagedomain *voltdm); - int (*disable)(struct voltagedomain *voltdm, int is_volt_reset); - int (*configure)(struct voltagedomain *voltdm); - int (*notify)(struct voltagedomain *voltdm, u32 status); - u8 notify_flags; - u8 class_type; -}; - -/** - * struct omap_sr_nvalue_table - Smartreflex n-target value info - * - * @efuse_offs: The offset of the efuse where n-target values are stored. - * @nvalue: The n-target value. - */ -struct omap_sr_nvalue_table { - u32 efuse_offs; - u32 nvalue; -}; - -/** - * struct omap_sr_data - Smartreflex platform data. - * - * @ip_type: Smartreflex IP type. - * @senp_mod: SENPENABLE value for the sr - * @senn_mod: SENNENABLE value for sr - * @nvalue_count: Number of distinct nvalues in the nvalue table - * @enable_on_init: whether this sr module needs to enabled at - * boot up or not. - * @nvalue_table: table containing the efuse offsets and nvalues - * corresponding to them. - * @voltdm: Pointer to the voltage domain associated with the SR - */ -struct omap_sr_data { - int ip_type; - u32 senp_mod; - u32 senn_mod; - int nvalue_count; - bool enable_on_init; - struct omap_sr_nvalue_table *nvalue_table; - struct voltagedomain *voltdm; -}; - -/* Smartreflex module enable/disable interface */ -void omap_sr_enable(struct voltagedomain *voltdm); -void omap_sr_disable(struct voltagedomain *voltdm); -void omap_sr_disable_reset_volt(struct voltagedomain *voltdm); - -/* API to register the pmic specific data with the smartreflex driver. */ -void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data); - -/* Smartreflex driver hooks to be called from Smartreflex class driver */ -int sr_enable(struct voltagedomain *voltdm, unsigned long volt); -void sr_disable(struct voltagedomain *voltdm); -int sr_configure_errgen(struct voltagedomain *voltdm); -int sr_disable_errgen(struct voltagedomain *voltdm); -int sr_configure_minmax(struct voltagedomain *voltdm); - -/* API to register the smartreflex class driver with the smartreflex driver */ -int sr_register_class(struct omap_sr_class_data *class_data); -#else -static inline void omap_sr_enable(struct voltagedomain *voltdm) {} -static inline void omap_sr_disable(struct voltagedomain *voltdm) {} -static inline void omap_sr_disable_reset_volt( - struct voltagedomain *voltdm) {} -static inline void omap_sr_register_pmic( - struct omap_sr_pmic_data *pmic_data) {} -#endif -#endif diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index a503e1e8358..d033a65f4e4 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -17,6 +17,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/power/smartreflex.h> #include <linux/err.h> #include <linux/slab.h> @@ -24,7 +25,6 @@ #include <plat/omap_device.h> -#include "smartreflex.h" #include "voltage.h" #include "control.h" #include "pm.h" @@ -36,7 +36,10 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, struct omap_sr_data *sr_data) { struct omap_sr_nvalue_table *nvalue_table; - int i, count = 0; + int i, j, count = 0; + + sr_data->nvalue_count = 0; + sr_data->nvalue_table = NULL; while (volt_data[count].volt_nominal) count++; @@ -44,8 +47,14 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, nvalue_table = kzalloc(sizeof(struct omap_sr_nvalue_table)*count, GFP_KERNEL); - for (i = 0; i < count; i++) { + if (!nvalue_table) { + pr_err("OMAP: SmartReflex: cannot allocate memory for n-value table\n"); + return; + } + + for (i = 0, j = 0; i < count; i++) { u32 v; + /* * In OMAP4 the efuse registers are 24 bit aligned. * A __raw_readl will fail for non-32 bit aligned address @@ -58,15 +67,30 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, omap_ctrl_readb(offset + 1) << 8 | omap_ctrl_readb(offset + 2) << 16; } else { - v = omap_ctrl_readl(volt_data[i].sr_efuse_offs); + v = omap_ctrl_readl(volt_data[i].sr_efuse_offs); } - nvalue_table[i].efuse_offs = volt_data[i].sr_efuse_offs; - nvalue_table[i].nvalue = v; + /* + * Many OMAP SoCs don't have the eFuse values set. + * For example, pretty much all OMAP3xxx before + * ES3.something. + * + * XXX There needs to be some way for board files or + * userspace to add these in. + */ + if (v == 0) + continue; + + nvalue_table[j].nvalue = v; + nvalue_table[j].efuse_offs = volt_data[i].sr_efuse_offs; + nvalue_table[j].errminlimit = volt_data[i].sr_errminlimit; + nvalue_table[j].volt_nominal = volt_data[i].volt_nominal; + + j++; } sr_data->nvalue_table = nvalue_table; - sr_data->nvalue_count = count; + sr_data->nvalue_count = j; } static int __init sr_dev_init(struct omap_hwmod *oh, void *user) @@ -93,6 +117,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) goto exit; } + sr_data->name = oh->name; sr_data->ip_type = oh->class->rev; sr_data->senn_mod = 0x1; sr_data->senp_mod = 0x1; @@ -106,7 +131,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) omap_voltage_get_volttable(sr_data->voltdm, &volt_data); if (!volt_data) { - pr_warning("%s: No Voltage table registerd fo VDD%d." + pr_warning("%s: No Voltage table registered fo VDD%d." "Something really wrong\n\n", __func__, i + 1); goto exit; } diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 840929bd9da..13d20c8a283 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -69,11 +69,6 @@ #define OMAP3_SECURE_TIMER 1 #endif -/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ -#define MAX_GPTIMER_ID 12 - -static u32 sys_timer_reserved; - /* Clockevent code */ static struct omap_dm_timer clkev; @@ -173,14 +168,14 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, return -ENXIO; /* After the dmtimer is using hwmod these clocks won't be needed */ - sprintf(name, "gpt%d_fck", gptimer_id); - timer->fclk = clk_get(NULL, name); + timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh)); if (IS_ERR(timer->fclk)) return -ENODEV; omap_hwmod_enable(oh); - sys_timer_reserved |= (1 << (gptimer_id - 1)); + if (omap_dm_timer_reserve_systimer(gptimer_id)) + return -ENODEV; if (gptimer_id != 12) { struct clk *src; @@ -368,6 +363,11 @@ OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE, OMAP_SYS_TIMER(3_secure) #endif +#ifdef CONFIG_SOC_AM33XX +OMAP_SYS_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, 2, OMAP4_MPU_SOURCE) +OMAP_SYS_TIMER(3_am33xx) +#endif + #ifdef CONFIG_ARCH_OMAP4 #ifdef CONFIG_LOCAL_TIMERS static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, @@ -393,65 +393,10 @@ static void __init omap4_timer_init(void) OMAP_SYS_TIMER(4) #endif -/** - * omap2_dm_timer_set_src - change the timer input clock source - * @pdev: timer platform device pointer - * @source: array index of parent clock source - */ -static int omap2_dm_timer_set_src(struct platform_device *pdev, int source) -{ - int ret; - struct dmtimer_platform_data *pdata = pdev->dev.platform_data; - struct clk *fclk, *parent; - char *parent_name = NULL; - - fclk = clk_get(&pdev->dev, "fck"); - if (IS_ERR_OR_NULL(fclk)) { - dev_err(&pdev->dev, "%s: %d: clk_get() FAILED\n", - __func__, __LINE__); - return -EINVAL; - } - - switch (source) { - case OMAP_TIMER_SRC_SYS_CLK: - parent_name = "sys_ck"; - break; - - case OMAP_TIMER_SRC_32_KHZ: - parent_name = "32k_ck"; - break; - - case OMAP_TIMER_SRC_EXT_CLK: - if (pdata->timer_ip_version == OMAP_TIMER_IP_VERSION_1) { - parent_name = "alt_ck"; - break; - } - dev_err(&pdev->dev, "%s: %d: invalid clk src.\n", - __func__, __LINE__); - clk_put(fclk); - return -EINVAL; - } - - parent = clk_get(&pdev->dev, parent_name); - if (IS_ERR_OR_NULL(parent)) { - dev_err(&pdev->dev, "%s: %d: clk_get() %s FAILED\n", - __func__, __LINE__, parent_name); - clk_put(fclk); - return -EINVAL; - } - - ret = clk_set_parent(fclk, parent); - if (IS_ERR_VALUE(ret)) { - dev_err(&pdev->dev, "%s: clk_set_parent() to %s FAILED\n", - __func__, parent_name); - ret = -EINVAL; - } - - clk_put(parent); - clk_put(fclk); - - return ret; -} +#ifdef CONFIG_SOC_OMAP5 +OMAP_SYS_TIMER_INIT(5, 1, OMAP4_CLKEV_SOURCE, 2, OMAP4_MPU_SOURCE) +OMAP_SYS_TIMER(5) +#endif /** * omap_timer_init - build and register timer device with an @@ -473,7 +418,6 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused) struct dmtimer_platform_data *pdata; struct platform_device *pdev; struct omap_timer_capability_dev_attr *timer_dev_attr; - struct powerdomain *pwrdm; pr_debug("%s: %s\n", __func__, oh->name); @@ -501,18 +445,9 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused) */ sscanf(oh->name, "timer%2d", &id); - pdata->set_timer_src = omap2_dm_timer_set_src; - pdata->timer_ip_version = oh->class->rev; + if (timer_dev_attr) + pdata->timer_capability = timer_dev_attr->timer_capability; - /* Mark clocksource and clockevent timers as reserved */ - if ((sys_timer_reserved >> (id - 1)) & 0x1) - pdata->reserved = 1; - - pwrdm = omap_hwmod_get_pwrdm(oh); - pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm); -#ifdef CONFIG_PM - pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; -#endif pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata), NULL, 0, 0); diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 43a97907533..de47f170ba5 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -49,6 +49,7 @@ static struct i2c_board_info __initdata omap4_i2c1_board_info[] = { }, }; +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) static int twl_set_voltage(void *data, int target_uV) { struct voltagedomain *voltdm = (struct voltagedomain *)data; @@ -60,6 +61,7 @@ static int twl_get_voltage(void *data) struct voltagedomain *voltdm = (struct voltagedomain *)data; return voltdm_get_voltage(voltdm); } +#endif void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, @@ -94,7 +96,7 @@ void __init omap4_pmic_init(const char *pmic_type, void __init omap_pmic_late_init(void) { - /* Init the OMAP TWL parameters (if PMIC has been registerd) */ + /* Init the OMAP TWL parameters (if PMIC has been registered) */ if (pmic_i2c_board_info.irq) omap3_twl_init(); if (omap4_i2c1_board_info[0].irq) @@ -213,10 +215,6 @@ static struct twl_regulator_driver_data omap3_vdd2_drvdata = { void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags) { - if (!pmic_data->irq_base) - pmic_data->irq_base = TWL4030_IRQ_BASE; - if (!pmic_data->irq_end) - pmic_data->irq_end = TWL4030_IRQ_END; if (!pmic_data->vdd1) { omap3_vdd1.driver_data = &omap3_vdd1_drvdata; omap3_vdd1_drvdata.data = voltdm_lookup("mpu_iva"); @@ -481,11 +479,6 @@ static struct regulator_init_data omap4_v2v1_idata = { void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags) { - if (!pmic_data->irq_base) - pmic_data->irq_base = TWL6030_IRQ_BASE; - if (!pmic_data->irq_end) - pmic_data->irq_end = TWL6030_IRQ_END; - if (!pmic_data->vdd1) { omap4_vdd1.driver_data = &omap4_vdd1_drvdata; omap4_vdd1_drvdata.data = voltdm_lookup("mpu"); diff --git a/arch/arm/mach-omap2/usb-fs.c b/arch/arm/mach-omap2/usb-fs.c deleted file mode 100644 index 1481078763b..00000000000 --- a/arch/arm/mach-omap2/usb-fs.c +++ /dev/null @@ -1,359 +0,0 @@ -/* - * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx - * - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/err.h> - -#include <asm/irq.h> - -#include <plat/usb.h> -#include <plat/board.h> - -#include "control.h" -#include "mux.h" - -#define INT_USB_IRQ_GEN INT_24XX_USB_IRQ_GEN -#define INT_USB_IRQ_NISO INT_24XX_USB_IRQ_NISO -#define INT_USB_IRQ_ISO INT_24XX_USB_IRQ_ISO -#define INT_USB_IRQ_HGEN INT_24XX_USB_IRQ_HGEN -#define INT_USB_IRQ_OTG INT_24XX_USB_IRQ_OTG - -#if defined(CONFIG_ARCH_OMAP2) - -#ifdef CONFIG_USB_GADGET_OMAP - -static struct resource udc_resources[] = { - /* order is significant! */ - { /* registers */ - .start = UDC_BASE, - .end = UDC_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { /* general IRQ */ - .start = INT_USB_IRQ_GEN, - .flags = IORESOURCE_IRQ, - }, { /* PIO IRQ */ - .start = INT_USB_IRQ_NISO, - .flags = IORESOURCE_IRQ, - }, { /* SOF IRQ */ - .start = INT_USB_IRQ_ISO, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 udc_dmamask = ~(u32)0; - -static struct platform_device udc_device = { - .name = "omap_udc", - .id = -1, - .dev = { - .dma_mask = &udc_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(udc_resources), - .resource = udc_resources, -}; - -static inline void udc_device_init(struct omap_usb_config *pdata) -{ - pdata->udc_device = &udc_device; -} - -#else - -static inline void udc_device_init(struct omap_usb_config *pdata) -{ -} - -#endif - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - -/* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = ~(u32)0; - -static struct resource ohci_resources[] = { - { - .start = OMAP_OHCI_BASE, - .end = OMAP_OHCI_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_IRQ_HGEN, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ohci_device = { - .name = "ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(ohci_resources), - .resource = ohci_resources, -}; - -static inline void ohci_device_init(struct omap_usb_config *pdata) -{ - pdata->ohci_device = &ohci_device; -} - -#else - -static inline void ohci_device_init(struct omap_usb_config *pdata) -{ -} - -#endif - -#if defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG) - -static struct resource otg_resources[] = { - /* order is significant! */ - { - .start = OTG_BASE, - .end = OTG_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = INT_USB_IRQ_OTG, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device otg_device = { - .name = "omap_otg", - .id = -1, - .num_resources = ARRAY_SIZE(otg_resources), - .resource = otg_resources, -}; - -static inline void otg_device_init(struct omap_usb_config *pdata) -{ - pdata->otg_device = &otg_device; -} - -#else - -static inline void otg_device_init(struct omap_usb_config *pdata) -{ -} - -#endif - -static void omap2_usb_devconf_clear(u8 port, u32 mask) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r &= ~USBTXWRMODEI(port, mask); - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static void omap2_usb_devconf_set(u8 port, u32 mask) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r |= USBTXWRMODEI(port, mask); - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static void omap2_usb2_disable_5pinbitll(void) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI); - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static void omap2_usb2_enable_5pinunitll(void) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI; - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static u32 __init omap2_usb0_init(unsigned nwires, unsigned is_device) -{ - u32 syscon1 = 0; - - omap2_usb_devconf_clear(0, USB_BIDIR_TLL); - - if (nwires == 0) - return 0; - - if (is_device) - omap_mux_init_signal("usb0_puen", 0); - - omap_mux_init_signal("usb0_dat", 0); - omap_mux_init_signal("usb0_txen", 0); - omap_mux_init_signal("usb0_se0", 0); - if (nwires != 3) - omap_mux_init_signal("usb0_rcv", 0); - - switch (nwires) { - case 3: - syscon1 = 2; - omap2_usb_devconf_set(0, USB_BIDIR); - break; - case 4: - syscon1 = 1; - omap2_usb_devconf_set(0, USB_BIDIR); - break; - case 6: - syscon1 = 3; - omap_mux_init_signal("usb0_vp", 0); - omap_mux_init_signal("usb0_vm", 0); - omap2_usb_devconf_set(0, USB_UNIDIR); - break; - default: - printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", - 0, nwires); - } - - return syscon1 << 16; -} - -static u32 __init omap2_usb1_init(unsigned nwires) -{ - u32 syscon1 = 0; - - omap2_usb_devconf_clear(1, USB_BIDIR_TLL); - - if (nwires == 0) - return 0; - - /* NOTE: board-specific code must set up pin muxing for usb1, - * since each signal could come out on either of two balls. - */ - - switch (nwires) { - case 2: - /* NOTE: board-specific code must override this setting if - * this TLL link is not using DP/DM - */ - syscon1 = 1; - omap2_usb_devconf_set(1, USB_BIDIR_TLL); - break; - case 3: - syscon1 = 2; - omap2_usb_devconf_set(1, USB_BIDIR); - break; - case 4: - syscon1 = 1; - omap2_usb_devconf_set(1, USB_BIDIR); - break; - case 6: - default: - printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", - 1, nwires); - } - - return syscon1 << 20; -} - -static u32 __init omap2_usb2_init(unsigned nwires, unsigned alt_pingroup) -{ - u32 syscon1 = 0; - - omap2_usb2_disable_5pinbitll(); - alt_pingroup = 0; - - /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */ - if (alt_pingroup || nwires == 0) - return 0; - - omap_mux_init_signal("usb2_dat", 0); - omap_mux_init_signal("usb2_se0", 0); - if (nwires > 2) - omap_mux_init_signal("usb2_txen", 0); - if (nwires > 3) - omap_mux_init_signal("usb2_rcv", 0); - - switch (nwires) { - case 2: - /* NOTE: board-specific code must override this setting if - * this TLL link is not using DP/DM - */ - syscon1 = 1; - omap2_usb_devconf_set(2, USB_BIDIR_TLL); - break; - case 3: - syscon1 = 2; - omap2_usb_devconf_set(2, USB_BIDIR); - break; - case 4: - syscon1 = 1; - omap2_usb_devconf_set(2, USB_BIDIR); - break; - case 5: - /* NOTE: board-specific code must mux this setting depending - * on TLL link using DP/DM. Something must also - * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED} - * 2420: hdq_sio.usb2_tllse0 or vlynq_rx0.usb2_tllse0 - * 2430: hdq_sio.usb2_tllse0 or sdmmc2_dat0.usb2_tllse0 - */ - - syscon1 = 3; - omap2_usb2_enable_5pinunitll(); - break; - case 6: - default: - printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", - 2, nwires); - } - - return syscon1 << 24; -} - -void __init omap2_usbfs_init(struct omap_usb_config *pdata) -{ - struct clk *ick; - - if (!cpu_is_omap24xx()) - return; - - ick = clk_get(NULL, "usb_l4_ick"); - if (IS_ERR(ick)) - return; - - clk_enable(ick); - pdata->usb0_init = omap2_usb0_init; - pdata->usb1_init = omap2_usb1_init; - pdata->usb2_init = omap2_usb2_init; - udc_device_init(pdata); - ohci_device_init(pdata); - otg_device_init(pdata); - omap_otg_init(pdata); - clk_disable(ick); - clk_put(ick); -} - -#endif diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 16a1b092cf3..0ac2caf1594 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -16,6 +16,8 @@ #include <linux/err.h> +#include <plat/voltage.h> + #include "vc.h" #include "vp.h" @@ -91,25 +93,6 @@ struct voltagedomain { }; /** - * struct omap_volt_data - Omap voltage specific data. - * @voltage_nominal: The possible voltage value in uV - * @sr_efuse_offs: The offset of the efuse register(from system - * control module base address) from where to read - * the n-target value for the smartreflex module. - * @sr_errminlimit: Error min limit value for smartreflex. This value - * differs at differnet opp and thus is linked - * with voltage. - * @vp_errorgain: Error gain value for the voltage processor. This - * field also differs according to the voltage/opp. - */ -struct omap_volt_data { - u32 volt_nominal; - u32 sr_efuse_offs; - u8 sr_errminlimit; - u8 vp_errgain; -}; - -/** * struct omap_voltdm_pmic - PMIC specific data required by voltage driver. * @slew_rate: PMIC slew rate (in uv/us) * @step_size: PMIC voltage step size (in uv) @@ -156,6 +139,7 @@ int omap_voltage_late_init(void); extern void omap2xxx_voltagedomains_init(void); extern void omap3xxx_voltagedomains_init(void); +extern void am33xx_voltagedomains_init(void); extern void omap44xx_voltagedomains_init(void); struct voltagedomain *voltdm_lookup(const char *name); diff --git a/arch/arm/mach-omap2/voltagedomains33xx_data.c b/arch/arm/mach-omap2/voltagedomains33xx_data.c new file mode 100644 index 00000000000..965458dc0cb --- /dev/null +++ b/arch/arm/mach-omap2/voltagedomains33xx_data.c @@ -0,0 +1,43 @@ +/* + * AM33XX voltage domain data + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include "voltage.h" + +static struct voltagedomain am33xx_voltdm_mpu = { + .name = "mpu", +}; + +static struct voltagedomain am33xx_voltdm_core = { + .name = "core", +}; + +static struct voltagedomain am33xx_voltdm_rtc = { + .name = "rtc", +}; + +static struct voltagedomain *voltagedomains_am33xx[] __initdata = { + &am33xx_voltdm_mpu, + &am33xx_voltdm_core, + &am33xx_voltdm_rtc, + NULL, +}; + +void __init am33xx_voltagedomains_init(void) +{ + voltdm_init(voltagedomains_am33xx); +} |