3 files changed, 28 insertions, 14 deletions
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 83080949d0d..f432ffc0deb 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -569,4 +569,30 @@ void omap3_ctrl_set_iva_bootmode_idle(void)
 	omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
 			 OMAP343X_CONTROL_IVA2_BOOTMOD);
 }
+
+/**
+ * omap3_ctrl_setup_d2d_padconf - setup stacked modem pads for idle
+ *
+ * Sets up the pads controlling the stacked modem in such way that the
+ * device can enter idle.
+ */
+void omap3_ctrl_setup_d2d_padconf(void)
+{
+	u16 mask, padconf;
+
+	/*
+	 * In a stand alone OMAP3430 where there is not a stacked
+	 * modem for the D2D Idle Ack and D2D MStandby must be pulled
+	 * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
+	 * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up.
+	 */
+	mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
+	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
+	padconf |= mask;
+	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
+
+	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
+	padconf |= mask;
+	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
+}
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index da054801b11..fc001587ebf 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -428,6 +428,7 @@ extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
 extern void omap3630_ctrl_disable_rta(void);
 extern int omap3_ctrl_save_padconf(void);
 extern void omap3_ctrl_set_iva_bootmode_idle(void);
+void omap3_ctrl_setup_d2d_padconf(void);
 extern void omap2_set_globals_control(void __iomem *ctrl,
 				      void __iomem *ctrl_pad);
 #else
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 3ea04ac10d1..126f3ec2d17 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -355,20 +355,7 @@ restore:
 
 static void __init omap3_d2d_idle(void)
 {
-	u16 mask, padconf;
-
-	/* In a stand alone OMAP3430 where there is not a stacked
-	 * modem for the D2D Idle Ack and D2D MStandby must be pulled
-	 * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
-	 * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */
-	mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
-	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
-	padconf |= mask;
-	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
-
-	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
-	padconf |= mask;
-	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
+	omap3_ctrl_setup_d2d_padconf();
 
 	/* reset modem */
 	omap3_prm_reset_modem();